SAP R/3 -- Not getting prompted for password on Heterogeneous Sys. Copy

Thank you in advance.  I am part of a project team that is testing the potential of moving from UNIX (AIX 5.3) to Linux (RHEL 4 or 5).  We are running SAP R/3 on IBM P570 with DB2 v9.1 and when we run this program:  Installation master sapinst
We are not getting prompted for the user password but when we run the same cd on a different system we get prompted for the user's password.  Can anyone point me in the right direction on what is wrong?  If you need more info let me know.
Thanks,
Erik

@ Sven & Markus
Well I have checked all the logs and there are no errors.  What I have found out is that it successfully runs but there is 0 ouput, in essence it isn't exporting any data.
Here it shows that it completed successfully but in the export directory there isn't data when there should be.
INFO       2009-10-08 17:34:19.270 [sixxcstepexecute.cpp:544]
The installation of component Execution of Service SAP ERP 6.0 Support Release 3 > Software Life-Cycle Options > System Copy
> IBM DB2 for Linux, UNIX, and Windows > Source System Export > Central System > Based on AS ABAP > Database Instance Export has been completed successfully  has been completed successfully.
See here:
/dev/exportlv    119.25    119.23    1%       16     1% /export
Thanks,
Erik

Similar Messages

  • Since upgrading to iOS 6 I am not getting prompted for my password when I update apps. Why is this?

    When I updated apps on my ipad2 and iphone4S I used to get prompted for my password within a certain time.  So I could update a couple and then 10 minutes later if I wanted to download or update something else I would need to put in my password again. Since I upgraded to iOS6, I don't believe I am prompted for my password the same amount of times. I updated an app this am after not using iPad through the night and it just updated, no password required. This has me concerned now because sometimes I bump buttons by accident and now I will be charged for these accidents. What has happened to Apple's brilliant security?

    They've changed it in iOS and updates (and updates ONLY) do not require a password since it is really unnecessary as they have it on record that you were the one who bought the app. Why is more security needed, you aren't going to be charged for anything?
    Next time you update and app go to the App Store and try to buy something. You will be asked for your password.

  • Notes keeps prompting for password

    Hello,
    I have a PowerMac (10.7), a MacBookPro (10.8), an iPhone (iOS 5) and a MacMini (10.6.8 Server). I have a user account Smith on the server and Mail service is activated. All my devices are configured to exchange notes through the server, using Smith account.
    When I create a note on my PowerMac in Mail, the synchronization works and I can see the note on my iPhone. Sync also works on the other way.
    But when I create a note  on my MacBook, Notes keeps prompting me for the Smith account password every minute. And the sync does not work because I don't see my notes on my iPhone. Sync also does not work on the other way. But no problem with Mail which uses the same Smith account : I can send and receive emails (and I am not prompted for my password).
    I tried to syncrhonize Notes with another mail account on my web provider and it works. I can create a note on my MacBook and see it on my iPhone.
    It seems that Notes only fails to sync when I use an account on my server. This is a regression compared to Lion : Notes and OSX 10.6.8 seem incompatbile.
    Any idea about the problem ? I saw that there are sync problem with Notes but nobody seems to have this password problem.
    Thanks for your help.
    Eric.

    You can disable the password protection when downloading apps (Dont know where is that in settings, cos my iPad is bricked).
    Technically, this is made for security, so that noone can download any unwanted app or charge any unwanted money from paid apps.

  • Not getting prompt for 2nd layer when writing DLT

    I am using DVDSP3. Trying to write a dual layer DVD-9. When I attempt to format it goes through the motions and writes both layers onto 1 tape. IFrom what I have read I am supposed to be prompted for the second tape. I have double checked my settings and they are all correct. I have marked for dual layer, one side, I let DVDSP set my breakpoint, 12 cm, OTP.
    I have searched the forum and found that the question was posed before and a couple of people alluded to the fact that there was a fix for this but they couldn't remember. Does anyone know anything about this?
    Thanks in advance

    Resolution- Either I just need a couple of days off or the drive was just being cranky but it is working now. I don't know if I turned things on in the wrong order before or what exactly made it work correctly but as we speak I am writing tape #2. So if anyone has this problem in the future make sure your tape is in securely and try powering everything back down and up. That's all I did.

  • SAP Script is not getting called for GI Output type WA03

    Dear All,
    I have designed one SAP script for goods issue output type WA03 for Tcode Migo.
    I have assigned the form name in NACE. But the problem is it is not picking my form, It is giving some Express document error. I am not able to know how the transaction is picking up the form since it is not going to the standard program even though i have kept breakpoint there. Can anybody let me know how the print program (SAPM07DR)is getting called from MIGO.
    print program  name is SAPM07DR.  Standard Script name is WASCHEIN.
    Regards,
    Ravindra Jain

    HI Ravi,
    Did you check the entry in NACE. I think you need to configure the Driver program and sap script there. just try to put a session break point and check why it is not picking.
    Thanks,
    Chidanand

  • Getting prompted for password EVERY time I open the App Store!

    Does anyone have this happen to them? Every time I tap the App Store icon to go browse for new apps, it asks me for my password. Every time. Its driving me nuts LOL. It just started doing it recently out of the blue, so I'm not sure what's causing the issue. I've included a screenshot below...
    Has anyone seen this or, better yet, cured this? Thanks in advance!

    Anyone?
    Totally weird stuff, as it's still doing it. This is after phone reboots, iTunes syncs, etc. etc. I just don't get it...

  • Not getting email for password reset

    I have 2 users that have forgot passwords and trying to reset them by have a email sent to them. the email never arrives to their inbox.

    Hello Eric,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue where multiple people have not received the Apple ID reset password email, please see the information in the article below.  
    If you didn't receive your Apple ID verification or reset email - Apple Support
    If after following these steps and the email still hasn't arrived, please contact Apple account security by using the link below.
    Contact Apple for help with Apple ID account security - Apple Support
    Cheers,
    Alex H.

  • BEFW11S4 - Constantly prompts for password submission and always fails

    I decided to do a full reset (45s button on back).  I promptly reset the admin password on first login.  All subsequent "APPY" actions in the admin console forces me to a popup login screen where I have to enter password.  This always fails and eventually I'm redirected to a 401 page (see below).   For example if I want to disable wireless or set a WEP key on the main page a popup appears for password but it always results in a 401.  I've tried clearing all browser information and attempted this on both IE 7 and Firefox 2.0.0.9 with similar results.
    1. I don't remember always getting prompted for password before; after initial login.
    2. Popup submission of password on subsequent authorizations always results in a 401.
    Thanks in advance!
    " 401 Authorization RequiredThis server could not verify that you are authorized to access. Either you supplied the wrong credentials(e.g., bad password), or your browser doesn't understand how to supply the credentials required."

    I managed to fix this...
    I found another support thread that indicated "disabling" Norton Internet Security prior to accessing the Linksys console.  It appears NIS was filtering or preventing the username/password being sent in the clear.
    How I did it...
    1. Right click the NIS icon in the desktop tray.
    2. Select "disable" NIS from the menu and enter a time from the drop-down (i.e. 5 minutes).
    3. Return to IE.  Clear all cached data (just in case).
    4. Proceed to login to Linksys!
    Cheers
    James

  • Installing microsoft office for mac and getting prompt for installer password.  i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?

    installing microsoft office for mac and getting prompt for installer password.  i have put in apple id password and admin password and not working, i have also reset my admin password 3 times and it is still not working? how do i get past this?

    You don't use your Apple ID or its password to install anything on your Mac. You use the admin account's name and password.
    Use the name and password you last entered when resetting them. The "name" you use is not the short name of the admin account folder.
    For example. If you create an admin account of John Smith, the short name given to that account's folder will be johnsmith. So when an app requests an admin name and password to install something, the admin name you enter is John Smith, not johnsmith.

  • HT1766 How can I make a NEW backup WITHOUT getting prompted for a (forgotten) password?

    Hello! 1st post here,
    How can I backup iPhone A to iTunes and then restore into iPhone B without getting prompted for a backup password that I do no know or remember ever setting?
    To clarify, I am not trying to read an encrypted backup. I would like to make a NEW backup but I do not want it to be encrypted as I do not know nor remember how a password was set in the 1st place. If I unclick the encryption checkbox, I am prompted to enter the password. Defeats the purpose of clicking on the box, no?
    Thanks,
    Henry

    Have you tried deleting the encrypted back up?

  • How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

    How do I move files from my iMac to my Airport without getting 'AirPort can not be modified' message. File sharing is enabled and I'm not getting asked for a password. Thanks

    What OS are you running.. this is usually only a problem in Mavericks.
    If so I recommend you mount the hard disk manually..
    Use Go, Connect to server.
    Type in the IP address if static.. eg
    AFP://10.0.1.1
    Or the name.. but you will have issues unless the name is short, no spaces and pure alphanumeric.. if you are using bad names.. fix it by a full factory reset in airport utility and give it all names that comply to the above.
    Type in
    AFP://TCname.local Where TCname is replaced with the actual name.
    You will be asked for the password the first time which is public unless you changed it.. please remember to save this in the keychain.
    Copy files then to a new directory you create on the TC.. do not place files inside the TM sparsebundle. Nor directly under the main directory.

  • How to make dyn/admin not to prompt for username and password?

    Hello all
    How to make dyn/admin not to prompt for username and password? I am writing a selenium job to automate cache invalidation to load test a production issue we are facing. Selenium is opening a fresh firefox session and prompting for username and password every time. I am also trying to modify my script such that it will use the same session again and not prompt for username and password. But I thought of asking this question in the group.
    Your inputs will help a lot.
    Thanks,
    Sundar

    Hi,
    You can set enabled property of /atg/dynamo/servlet/adminpipeline/AuthenticationServlet/ to false. It will not prompt for authentication.
    Gopi

  • I keep getting prompted for my exchange password for my work email when I try to update

    I keep getting prompted for my exchange password for my work email when I try to check/update for new emails. Any resolution other than "contact IT"?
    Thanks

    Enter the correct password in the account under Settings > Mail, Contacts, and Calendars.

  • 3?'s: Message today warning lack of memory when using Word (files in Documents) something about "idisc not working" 2. Message week ago "Files not being backed up to Time Capsule"; 3. When using Mac Mail I'm prompted for password but none work TKS - J

    3 ?'s:
    1  Message today warning lack of memory when using Word (files in Documents) something about "idisc not working"
    2. Message week ago "Files not being backed up to Time Capsule";                                                                                                                                             
    3. When using Mac Mail I'm prompted for password but none work
    Thanks - J

    Thanks Allan for your quick response to my amateur questions.
    Allan:     I'm running version Mac OS X Version 10.6.8     PS Processor is 2.4 GHz Intel core 15 
    Memory  4 gb  1067   MHz  DDr3  TN And @ 1983-2011 Apple Inc.
    I just "Updated Software" as prompted.
    Thanks for helping me!    - John Garrett
    PS.
    Hardware Overview:
      Model Name:          MacBook Pro
      Model Identifier:          MacBookPro6,2
      Processor Name:          Intel Core i5
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache (per core):          256 KB
      L3 Cache:          3 MB
      Memory:          4 GB
      Processor Interconnect Speed:          4.8 GT/s
      Boot ROM Version:          MBP61.0057.B0C
      SMC Version (system):          1.58f17
      Serial Number (system):          W8*****AGU
      Hardware UUID:          *****
      Sudden Motion Sensor:
      State:          Enabled
    <Edited By Host>

  • Gnome screen lock does not prompt for password

    Whenever I lock my screen under gnome, I am never prompted for password when unlocking.
    Does anyone know how to solve this issue?

    Do you have fprintd installed? I ask because I found the following openSUSE bug report: http://lists.opensuse.org/opensuse-bugs … 01518.html

Maybe you are looking for