SAP R/3 to SAP BW

Hi
Could you pls tell me
How SAP R/3 Data is transfered to SAP BW in detail step by step ??
Thanks
Sree

Hi,
Check this link.
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
Asign point if useful please.
Regards

Similar Messages

SAP 8.82 para SAP 9.0, SAP 9.1

Bom dia pessoal,
Atualmente utilizo o SAP 8.82 na empresa, estava pensando mais para o começo do ano que vem fazer a migração para SAP 9.0 ou até o mesmo o SAP 9.1 (para esta versão tenho que esperar os add'ons nacionais terem versão funcionando).
Por acaso alguém já fez a migração da SAP 8.82 para o SAP 9.0? gostaria de saber se teve muitas dificuldades com os usuários, problemas em banco de dados, computadores, redes, etc.
Tenho uma maquina virtual rodando o SAP 9.0 PL13 onde sempre pego minha base atual na 8.82 e converto pra ela pra fazer alguns testes básicos, até o momento o que deu trabalho é alterar todos meus relatórios em Crystal Reports que utilizam documentos de makerting (pedidos, notas, etc) pra testar o campo de cancelamento "CANCELED".
Um grande abraço,
Fabio
SAP 8.82 PL14 / SAP 9.0 PL13 (test) / SAP 9.1 PL2 (test).

Ola pessoal,
segue algumas observações dos problemas que ocorreu comigo na conversão do SAP 8.82 PL14 para SAP 9.0 PL15.
1) Update do software nos computadores/terminais
- Quase nenhum update deu certo, quando chegou no 3o computador descobri o motivo, o SAP tenta fazer update de vários componentes no modo automatizado, você não vê mas ele roda vários "setups" de vários programas diferentes, um deles é o "Microsoft C++ 2010 Runtime".
Antes de entrar no SAP no terminal pra fazer o update, eu comecei a instalar o runtime manualmente, entre na pasta "...\B1_SHR\Client\ISSetupPrerequisites\{83960519-644A-4722-BA7A-37D23C1D004F}" e instalei o programa "vcredist_x86".
Pronto, após instalar o runtime do C++, foi só entrar no SAP 8.82 que ele fazia corretamente o update para o SAP 9.0.
2) Erro contas a pagar e a receber Could not find stored procedure 'TmSp_SetBgtAccumulators_ByJdt"
Após vários testes na minha conversão "beta" do SAP 8.82 PL14 para o SAP 9.0 PL11 (e PL15 agora em janeiro), onde fiz vários procedimentos referente a compras, vendas, cadastros, mrp etc, tudo funcionou perfeito.
Após a conversão na base real (base quente) ontem, hoje trabalhamos tranquilamente, pedido de compra, nota fiscal de entrada,, ,pedido de venda, nota fiscal de saída, e validação de nota, e tudo continuava funcionando bem, mas ocorreu um erro bem estranho na baixa do contas à pagar e à receber.
Na conversão do banco, não deu erros e nem avisos, onde foi convertido com sucesso, mas por algum motivo a conversão do SAP 8.82 PL14 para o SAP 9.0 PL15 apagou a procedure abaixo, fazendo com que o sistema apresentasse erro na baixa do financeiro.
"Could not find stored procedure 'TmSp_SetBgtAccumulators_ByJdt'"
Após pesquisa na internet, encontrei no próprio fórum a solução.
http://scn.sap.com/thread/3468903
Para resolver o caso, segui o que estava no post acima, é só entrar em Ajuda, Suporte Desk, Restaurar, Restaurar Procedimentos Arquivados.
Não pode ter ninguém conectado no banco de dados para rodar esse procedimento, após a execução, o financeiro funcionou perfeito.
Abraço
Fabio
SAP 9.0 PL15 / SAP 9.1 PL3 (test)

SAP Client to the SAP Server: internal Error (-1102)[Message 131-183]

Hi,
We are using Windows 2008 Server R2, SQL 2008 Standard, SAP B1 8.81 PL08.
When we trying to connect SAP Client to the SAP Server. There has internal Error (-1102) occurred. We can view the database on client, but we always get the same error message after enter the User ID and Password. We have checked the native client and it is installed and also opened the following ports: 1433, 30000, 30001. We have tried to open all of firewall, but itu2019s no use.
When I set a computer in to the engine room and set the network connection, this one can connect SAP Client to the SAP Server.
But when client connect to server by VPN, the IP address will not in the same section. Then We tried to set the IP address has the same network section with the server, but it's still disable.
I set a computer for SAP Server without firewall, complex network, virtual IP and no router in my office. And use a SAP Client which is in different network domain to connect to SAP Server by internet, not VPN, but the SAP Client still canu2019t connect to SAP Server. I get the same internal Error (-1102).
It can not only ping to SAP Server IP, but telnet to the port 1433, 30000, 30001, 445.
When I use a pc with server tools, it can connect to the SAP Server by the localhost license. But if I use a computer only install client and assign the server license. The latter one always got the error.
How could we solve this problem? Is there has another setting I am missing which might be blocking the connection?
Thanks in advance.

Hi,
We are using VPN and using Terminal Licensing or Remote Desktop Conneciton.
The idea here is VPN will connect you to the network and when you are connected to the network
dont use the direct LAN IP connection use the Terminal Licensing to connect.
Again both are needed VPN and Terminal Licensing. VPN for the connection and if successfully connected
use or connect from Terminal Licensing or Remote Desktop connections.
Thanks.
Clint

No connection from SAP EP to Raytion SAP Connector

Hello,
The Raytion SAP connector 1.5.1 has been deployed without any problems on the customer SAP EP (Production). We see that no connection can be made from the SAP EP to this SAP Connector.
Extract from the log file: (10.54.17.63 is the IP address from the Raytion SAP Connector server.)
2008-04-03 13:30:40,082 DEBUG resource allowed by watched repository filter: true
2008-04-03 13:30:40,097 DEBUG resource allowed by hidden filter: true
2008-04-03 13:30:40,097 DEBUG resource allowed by size filter: true
2008-04-03 13:30:40,097 DEBUG resource allowed by Exclude RegEx filter: true
2008-04-03 13:30:40,097 DEBUG resource released by timebased service: true
2008-04-03 13:30:40,097 DEBUG resource released by statemanagement service: true
2008-04-03 13:30:40,191 INFO about to post /Intranet/Departement%20Facility%20Management/Dienst%20Schoonmaak/Nieuws/7061c4fe-fc43-2a10-05bc-bcb3aa83965c.xml
2008-04-03 13:30:42,082 WARN could not connect to connector server at http://10.54.17.63:16050/DataSource. http://portaal:50000/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/Intranet/Departement%20Facility%20Management/Dienst%20Schoonmaak/Nieuws/7061c4fe-fc43-2a10-05bc-bcb3aa83965c.xml not sent! com.caucho.hessian.io.HessianProtocolException:
2008-04-03 14:47:32,552 INFO Start security update initiated by Connector Server
2008-04-03 14:47:34,240 WARN could not connect to security cache at http://10.54.17.63:16050/Security. Start update notification not sent! com.caucho.hessian.io.HessianProtocolException:
2008-04-03 14:47:34,240 ERROR Could not send security synchronisation start notification. No server available.
The contractor that installed this, thinks the next area to look to is to see if the SAP EP has been configured somehow to stop outgoing http traffic from applications running within it... Maybe the EP is blocking outgoing HTTP access, although other components from the EP are working OK.
How can we check this?
Please advise.
Kind regards.

Check the following Links:
I want an explanation for this connection between R/3, CRM and IPC ??????
Document flow from R/3 to CRM
BP Changes From CRM to R/3
BP Changes From CRM to R/3
Reward Points if useful.

SAP DB Connection from SAP BI on HP UNIX to MS SQL External Database

Dear All,
Greetings!
I have a scenario to configure a SAP DB Connection from SAP BI System on HP UNIX 11i to the external legacy system MS SQL 2000 Enterprise for data upload. I am interested in connecting the SQL server as a Source System to the BI System.
I read through documents mentioning about installation of a Client driver in the SAP BI System, I also downloaded the JDBC client software and tried installing the same, but the steps as mentioned Setting the CLASSPATH or connecting to the server did not work.
Please help me in connecting the SQL Server as Source System, I would like to know in detail about the same - so kindly help me with the links to documents and guides about the same.
Thank you
Regards,
Vineeth Damodar

Short answer: this does not work.
Long answer: To connect directly to the database you need
- a database client for the source system
- a database interface library for the source system
Both of them are not available for HP-UX if the target database is SQL server --> doesn't work.
What you can do is: add a Windows application server to your BI system (heterogeneous installations work and are supported) and add there the database client and the database interface library.
Markus

Data Migration from SAP r/3 to SAP R/3

Hi all,
What is the best method to migrate data from one verison of SAP to another verison of SAP ECC say from SAP 3.1 to SAP ECC 6.0?
This is for all SAP modules including sd, mm, pp, fi, co master and transaction data. I know there are number of technologies to load the data such as LSMW, IDOC, ALE, DI, etc but what is the best way to extract all data feeds to be loaded back into SAP.
Thanks in advace.

Take a look to the following link, may be useful for you
SAP NetWeaver - Data Migration (CA-DMI) [original link is broken]
if helpful reward points are appreciated

Reading of File from legacy system into SAP Application Server using SAP XI

Hi All,
I have a file in <b>Legacy System with Exchange rates information data</b> i have to read that file using SAP XI process and put that file in SAP Application Server in SAP Specific Format and latter i have to use program RFTBFF00 to upload the file in the Application Server into SAP Tables.
Can anybody tell me how can i do this with some example of same scenario.
It would be better if anybody provides code example as i am new to SAP XI.
Thanks in advance.
Warm Regards,
Rayeez.

Hi Shaik,
You need the access to the file system of ur legacy application and then you can follow this link for the required ifnormation
File & Header
Regards
Vishnu

SAP to External Non SAP Systems C++ Connections

Hi guys,
i should develop a C++ application that should transfer/receive data from an external Non SAP System to a SAP System (MM SD FI Modules) and viceversa,
This bidirectional integration should be synchronous and asynchronous, depending on the data flow type,
I was thinking to use IDocs for this communications,
I should be able to send purchase and sell orders requests from the Non Sap System to the Sap system and receive the result of SAP processes once the SAP transactions will be finished.
So i'll have a C++ process that send idocs (created with sdk end sent throught RFC to SAP) for SD or MM operations and a SAP Abap module that receive this idocs and start internal operations.
After this i need an internal SAP abap module that send to my external application Idoc's with the result of internal operations.
Are the idocs the common way to transfer data(low cadinality) in this scenario, or there is a better way?
Note: my sap system versions are previous to the netweaver release, so i can't use a Service Oriented comunication...
Thanks in advance!!!

Hi,
try sending the data through BAPI Function Module.
and use the FM in your C++ program.
hope this works....
try
best of luck!!
thanks
ravi aswani

Protection of Key SAP HR tables in SAP R/3 Upgrade

Hello,
We are upgrading SAP R/3 to ECC 6.0. We have SAP HR, that also needs to be upgraded. Based on this, I have 4 queries, seen below.
1- What are the Pre-reqs and protection of data related activities prior to doing the above upgrade?
2- What are the key tables (in SAP R/3 and SAP HR) to be protected prior to "OR" during a upgrade?
3- What are the key tables (in SAP BW) to be protected prior to "OR" during a upgrade?
4- What is the length of a typical upgrade? (Is there a tool to analyze the expected time duration?)
Thanks for help in advance

Hi Abdul
Please find answers to your questions below .
One should be very careful with the upgrades with HR or BW unlike normal upgrades. Though upgrade do not delete any data but some exceptional tables may be skipped by upgrade and which will not have any data after system is converted to target
1.
Befoe prepare
Check SAP_HR 46C SP level
during Prepare
Add ST-A/PI in upgarde as well so that error will not be in JOB_RDDNTPUR
include all support package of the SAP_HR comp in BIND _PATCH phase
Before upgarde phase :
Backup table T512W(wage types in HR )
Before downtime
backup ST03 data
2. Key table in HR upgrade is T512W
3. check the upgrade guide for BW
4. The best prractice for this kind of project is to have upgrade system (sandbox which is copy of development ) . Try to have similar hardware configuration as PRD
This system will give the timeline for entire upgrade
Upgrade depends on hardware ,database ,size of database ,no of support packs binded in
So matra is " Read Read and Read "
Success !!
Ganesh

Question on the flow of the data from SAP R/3 to SAP BW

hai bwgurus,
I am learner of sap bw ,i have small doubt in the extracting the data from sap r/3 to sap bw i.e
Extraction is always performed only on master data table not on transaction table , Am I right or wrong pls correct me with an detailed explanation ?
EmailId:[email protected]
Regards
Raju

Hi raju,
Extraction is always on Masterdata and as well as transaction data.
a transaction is event that ocurs on masters(like business example would be there will be a distributor who orders certain quantity of material so Disturbutor will be the companies sole distrubutor who comes under master and transaction data is the qty of materila he purchsed).All the transactions occur in SAP r/3 and that data will be replicated to BW for Data ware hosue and reporting.
Reg
Ram
""assign points if it helps""

To Replicate Material DATA from SAP R/3 to SAP-BW

Hello,
I need the Material Master data from SAP R/3 in SAP BW. The material Data is to to moved in Info object: 0MATERIAL. In SAP R/3 the data for material is stored in table:MARA. Which Business content needs to be activated in BW.
Please give the step by step method to push this data from R/3 to BW.
What are the pre-requisites for the same.
Thanks for the information.
Regards,
Sumita

Hi
If you want to get data for material...
go to R/3 Side and tcode rsa5>find for 0material>you will get 0material_attr,0material_text and some hierarchy ..
Activate these data sources...
Goto BW side transaction RSA1-->replicate the data sources....
Go to Business content tab of the RSA1-->take grouping as 'in data flow before'
and select object type as info object in the left pane,find for 0material object.
drag and drop to right pane...click on install...now your 3 data sources(0material_attr and 0material_text and hierarchy will be assigned to 0material)..now you can create infopackage and load data(it is master data only)...
If you want to load transactional data,first of all you need to find out the cube and data sources to be loaded...once you find out your data sources,do same as above in r/3 side..and bw side take your required infocube as same as above...
If you want to get data specifically from mara table,Create a generic data source on table mara...
RSO2-->data source type transactional>give name and then click on create-->give description and application component to which this belongs to and give the name of the table(mara in table field) and then click on save...your generic data source is ready...go to rsa6 and there you can choose required fields for selection..
Then go to bw create infosource,cube and assign all these and load data...
Hope it helps
Thanks
Teja

Material transfer from SAP R/3 to SAP Business One is blocked

Hello experts,
Please I need your help for the following scenario:
Our client has B1iSN and SAP R/3 in the headquarter company and B1if and SAP B1 in the subsidiary. The material transfer from SAP R/3 to SAP Business One failed and the following message is diplayed:
Result message :
com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.bizprocessor.BizProcException: BPE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: com.sap.b1i.xcellerator.XcelleratorException: XCE001 Nested exception: java.lang.RuntimeException: DI Error: (-2028) No matching records found (ODBC -2028)
The Material database transfer is blocked due to message in status
failure which block all other messages.
We tried to restart the server (Business One and B1iSN) but it didnu2019t solve the issue.
Any idea please? Thank you.

Hi Nadia,
did you check the WRITE-POLICY settings of your scenario?
when reading the displayed DI Error message, it looks like B1iSN is trying to update an B1 item which does not exists.
Please open SAP B1iSN Tools -> Development Tools -> Graphical scenario Design and select your Bizpackage, BizStep and BIUMETA.
Open the WRITE-POLICY symbol and check the entries:
Insert on Exist = error or fallback2U
Update on Miss = fallback2I
The Update Policy should stay to value regular.
To activate changes of the WRITE-POLICY please deactivate, modify and reactivate your Business Process instance.
If a WRITE-POLICY change has no effect, please check your data mapping (BIU) and especially the parameter <QueryParams>, which mustn't be filled for "insert/Add" operations into B1.
Best regards
Bastian

Data Import from SAP R/3 to SAP MDM 7.1 without SAP PI

Hi All,
I have a requirement to import Vendor Master data from SAP R/3 to SAP MDM 7.1 on a regular basis. What are the Options available for data transfer between these two systems without any middleware(like SAP PI,etc). I checked the SAP Documentation and found the scenarios with SAP PI as middleware.
I have few very basic ideas:
1) Will there be any way for SAP MDM to pick a file from certain location and load the data..
2) Shall I use MDM ABAP API to write a program to connect to MDM Repository and schedule this at regular intervals to achieve the data transfer.
Pls suggest the best design approach..
Thanks in advance.

1) Will there be any way for SAP MDM to pick a file from certain location and load the data..
ANS : No, MDM will not pick up the file, file can be pick up from MDM Inbound folder and send from outbound folder for automize process and for MDM manual Process you can pick up and send file to local desktop, network shared path
2) Shall I use MDM ABAP API to write a program to connect to MDM Repository and schedule this at regular intervals to achieve the data transfer.
ANS : require to write code at ABAP side
so ABAP program will pick or send data file to MDM folder
Note following point
1. Require to write ABAP Program which will pick or send data file to MDM outbound / Inbound folder
2. Require to do some technical setting for ABAP program at SAP side, technical person will help regarding this matter
Note : There are many disadvantage and time consuming procss, monitoring file and it is not advisable to go without any intermidiate software for e.g PI, Tibco
Thanks,
Jignesh Patel

Connection between SAP R/3 and SAP XI with RFC

Hi Experts,
I am beginner in SAP XI.
We are using SAP XI 3.0 SP 9 and SAP R/3 4.6 C
I am trying to validate a connection between SAP R/3 and SAP XI with RFC.
I followed all the weblogs ,and i did exactly the same way, but I am unsucessful...
Schema not available Exception
com.sap.aii.af.service.cpa.CPAException: Schema not available for RFC|3b787a8035c111d6bbe0efe50a1145a5|http://sap.com/xi/XI/System.
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataSAXHandler.endElement(DirectoryDataSAXHandler.java:262)
at com.sap.engine.lib.xml.parser.handlers.SAXDocHandler.endElement(SAXDocHandler.java:154)
at com.sap.engine.lib.xml.parser.XMLParser.scanEndTag(XMLParser.java:1826)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1722)
at com.sap.engine.lib.xml.parser.XMLParser.scanContent(XMLParser.java:2298)
at com.sap.engine.lib.xml.parser.XMLParser.scanElement(XMLParser.java:1719)
at com.sap.engine.lib.xml.parser.XMLParser.scanDocument(XMLParser.java:2701)
at com.sap.engine.lib.xml.parser.XMLParser.parse0(XMLParser.java:162)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parseAndCatchException(AbstractXMLParser.java:126)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:136)
at com.sap.engine.lib.xml.parser.AbstractXMLParser.parse(AbstractXMLParser.java:209)
at com.sap.engine.lib.xml.parser.Parser.parseWithoutSchemaValidationProcessing(Parser.java:270)
at com.sap.engine.lib.xml.parser.Parser.parse(Parser.java:331)
at com.sap.engine.lib.xml.parser.SAXParser.parse(SAXParser.java:125)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:345)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:143)
at com.sap.aii.af.service.cpa.impl.cache.directory.DirectoryDataParser.updateCentralCache(DirectoryDataParser.java:54)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.updateCacheWithDirectoryData(CacheManager.java:713)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager.performCacheUpdate(CacheManager.java:595)
at com.sap.aii.af.service.cpa.impl.cache.CacheManager$CacheUpdateRunnable.run(CacheManager.java:440)
at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:145)
Please help me out on this
Thanks in advance
Raju

hi,
try refreshing you CAP cache:
741214 (check this note)
and check if the refresh was successful
(CPA history)
Regards,
michal

SAP R/3 and SAP Netweaver: changes, advantages and disadvantages

Hello,
i am interested in SAP R/3 and SAP Netweaver. Are there existing articles which describe in detail the architecture of both systems and improvements of the new system. I want to know which changes the developers made an why they did it? What are the advantages of the new Netweaver system? Are there disadvantages? Does someone have some links to articles which deal with those questions? Thanks.
Kind regards,
Philipp

Dear Philipp,
There is a separate section for SAP Netweaver in SDN forum. Check that section and you will get the solution to your query.
This link might also be helpful:
help.sap.com/saphelp_nw2004s/helpdata/en/84/54953fc405330ee10000000a114084/content.htm
Regards,
Rakesh

Need of XI to send an XML from one SAP system to another SAP system

Dear colleagues,
I work in the SRM solution.
In SRM there is a Purchaser and Supplier scenario called Supplier Self Services.
The Purchaser creates a Purchase order and sends it to the supplier in form of an XML file.
The purchaser system and supplier system are the same SAP system but different clients.
Example: Purchaser client is 300 and Supplier client is 330 and both of them are on the same system.
I have a very basic question.
Currently we have the XI system which acts as an interface to send the Purchaser PO XML to the Supplier as XML.
a)My question is in case the XML structure is identical across both the clients, then what is the need of XI system?
b) Is it not possible to send XML from one client to another without an XI system? there si no need of any message mapping required since I am expecting the same XML structure in both clients.
Please clarify the need of XI system in the following scenario. Is it not possible without XI?
Many thanks.
Best regards,
Srivatsa

Hi Srivatsa,
YOu can send the XML message from one sap system to another sap system even without an XI system in between.
But the use of SAP XI (Or any other middleware) is recommended because, it gives you the following advantages.
1) Better monitoring and alerting mechanism. XI provides you robust set of tools that let you monitor the status of the messages that are exchanged.
2) Direct communication between systems is referred to as Point to Point communication, which has its own disadvantages as against Hub and SPoke model (Message exchange using XI).
3) Message delivery is guaranteed if you have XI in between.
If the target system is down, the sender sap system will not try multiple times to post the message.
But if you use XI, it can be configured to send the message multiple times, till it succeeds.
Regards,
Ravi Kanth Talagana

SAP R/3 to SAP BW

Similar Messages

Maybe you are looking for