Sap R/3 version

dear gurus
how can i find a SAP R/3 version whether it is 4.6C or 4.7 0r ECC 5 etc in the system/server.
quick reply will be awarded

Hi kalai Anna,
See in the menu bar
System --> Status in that 'Sap System data' there is screen field called 'Component Version'. It shows the version.
Thanks and Regards,
Dharani Kumar

Similar Messages

We have to upgrade from SAP 4.0 version to ECC6.0(only EDI/IDOC effects)

Hi All,
We have to upgrde a system from SAP 4.0 version to ERP6.0, is there any difference in EDI and IDOC
tables or their types in ERP6.0 from the 4.0 version, which we have to also consider or not.
but if differences are there but SAP itself is taking care for that, then how the sap is taking care of that ..?
Regards,
Rohit Sharma
Edited by: rohit sharma on Jun 19, 2008 1:26 PM

I´m not sure what you mean by "old table to new table".
The general table structure is not changed, VBAK + VBAP are still there. They may have been extended by additional fields, depending on how your system is implemented. It´s also possible, that if you activate any business function after the upgrade, that tables will get appends.
The old IDOC structures working before the upgrade should work after the upgrade the same way since those structures are not touched.
Markus

Can i upgrade SAP business One version 8.6 to 9.1

Hi Expert,
Can i upgrade SAP business One version 8.6 to 9.1 directly.please assist me.
Regards,
Mizan

Hi,
There is no 8.6 version for SAP B1. Please advice correct version with PL.
Thanks.

Dynamic internal table in SAP 3.1I version

hi All,
i am new to this form and have the following question.
Currently i am working in SAP 3.1I version and i am required to create a dynamic internal table.
Basically the table name will be entered by the user on the selection screen and the dynamic internal table has to be of this type (entered by user on the selection screen).
Please let me know whether this is possible in 3.1I version and if its possible then how to achieve this.
Note: this requirement has to be done in 3.1I version hence OO concept (ie)
     cl_alv_table_create=>create_dynamic_table doesn't work here.

refer this demo code -
parameter p_table type tabname.
field-symbols <tab> type table.
field-symbols <tab1> type any.
types: begin of itab,
      t_name type tabname,
      t_ref type ref to data,
      end of itab.
data itab1 type table of itab with non-unique key t_name.
perform fetch_data using p_table.
perform print_table using p_table.
*&      Form fetch_data
      text
     -->P_P_TABLE text
FORM fetch_data USING P_TABLE1 type tabname.
data itab2 type itab.
itab2-t_name = p_table1.
create data itab2-t_ref type table of (itab2-t_name) .
assign itab2-t_ref->* to <tab>.
append itab2 to itab1.
select * from (p_table1) up to 25 rows into corresponding fields of table <tab>.
ENDFORM.                    " fetch_data
*&      Form print_table
      text
     -->P_P_TABLE text
FORM print_table USING P_TABLE1 type tabname.
DATA t_ref1 TYPE REF TO data.
DATA itab2 TYPE itab.
FIELD-SYMBOLS <field> TYPE ANY.
READ TABLE itab1 INTO itab2 WITH KEY t_name = p_table1.
ASSIGN itab2-t_ref->* TO <tab>.
CREATE DATA t_ref1 LIKE LINE OF <tab>.
ASSIGN t_ref1->* TO <tab1>.
DO.
*READ TABLE <tab> ASSIGNING <tab1> INDEX 1.
READ TABLE <tab> ASSIGNING <tab1> INDEX SY-INDEX.
*WRITE:/ p_table1.
NEW-LINE.
IF sy-subrc <> 0.
EXIT.
ENDIF.
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE <tab1> TO <field>.
IF sy-subrc <> 0.
EXIT.
ENDIF.
WRITE: <field>,'    '.
ENDDO.
ENDDO.
ENDFORM.                    " print_table

Function module to upload excel to internal table in SAP 7.0 version system

<<Question has been asked and answered many times - please search before asking for function modules for common tasks>>
currently i am using SAP Netweaver7.0 version, i need a Funtion Module to upload an Excel sheet data to an internal table.
please let me know this ASAP.
thanks,
Edited by: Matt on Aug 24, 2009 7:25 AM

hi,
the FM you have suggested does not exist in the *version 7.0*
added the FM "ALSM_....",also does not exist
pls suggest a FM for SAP7.0 version

Services for Object activation required for VA02 in SAP 4.0B version

Hello,
This is regarding Sales Order Change (VA02) and If I select the MENU navigation : SYSTEM -> Services for Object in ECC 6.0 then it is populating one Pop-up stating that "Sales Order XXXXXXX" Here we have the option for "Create Attachment".
For this we need to do one prerequist in SAP ECC 6.0 Goto Tcode SU01 under the "Parameter" Tab we need to provide the following Parameter ID i.e
SD_SWU_ACTIVE and Parameter value is : "X".
The Same scenario I need in SAP 4.0b version.
It would be grateful if you can helpout in this issue.
Than you very much in Advance ...

Hi,
Absolutely it is not possible.
The services for object is only visible, once the original object is created.
Even if you check for normal F-02 entry also, it wont be visible during entry, but will be visible after posting if we go thru FB02 or FB03.
Any attachment can be assigned through the services for object, is possible only after creation of the dependent / original data.
So for AS02 and AS03, the dependent data has to be there in the DB, which has been created with AS01.
Thanks,
Srinu

WebDynpro for ABAP Application in SAP-4.7 Version

Hi,
I am new to WebDynpro for ABAP. Can anyone tell me that Could I create any application of WebDynpro Application in SAP-4.7 version.
Regards
Dinesh.

Hi Dinesh,
Web Dynpro Tool is not available in SAP-4.7 version.
u can create web application using BSP(business server pages which is available in 4.7 version.) from SE80
Web Dynpro tool is available in ECC6.0.
To Create a web dynpro application or component Go To SE80,and select Web Dynpro component/interface from the drop down list.
U need to Have SAP Net Weaver Installed in ur version.
Regards,
Lakshman
Edited by: Lakshman N on Nov 17, 2008 1:16 PM

SAP BPC NW version with SAP Dashboard Design (No Local Connection)

Dear ALL,
I'm working on SAP BPC NW version 10.0 and I'm trying to build some dashboards on it using SAP Dashboard Design.
So, I follow some links online and I failed to proceed at the very beginning stage:
To create a "Local" connection in Excel EPM Add-in.
From the drop down box for the available connection types, I can just see Planning and Consolidation versions for both MS and NW, but nothing called "Local" as referred in those web.
Any ideas?
BR,
Antony

Hi Antony,
Go through the SAP Note 1730125.
Check the attached doc "SAP Business Planning and Consolidation 10.0, version for SAP NetWeaver" in the note
for more details.
Regards,
Javed

Is it possible to use Adobe Interactive Forms in SAP (ABAP) Trial Version?

Dear All,
i need some help concerning the usage of Adobe Interactive Forms in SAP (ABAP) Trial Version.
I installed SAP Netweaver 7.01 (ABAP Trial Version) and i would like to use the Adobe Interactive Form editor (transaction SFP). Is this trial version prepared for this? Is it possible to edit and test Interactive Forms in the ABAP Trial Version too?
Somebody told me that he installed Adobe Lifecycle Designer 7.1 but the layout manager part of the editor shortdumped when he wanted to go back to other parts of the editor or he wanted to save what he did...
Is it enough to install Adobe Lifecycle Designer 7.1? Is there something else to install or configure?
Thank you for your help in advance.
All the best, P. Phil.

Yes, you need the lifecycle designer installed. That should be enough to work with the SFP transaction. But to actually use the form, I think you do need the ADS(Adobe Document Services) which runs on the java stack.
Regards,
Rich Heilman

"Only assign one SAP NetWeaver product version to product system"

Greetings,
Somehow, after upgrading my PI system from NW 7.11 to NW 7.4, the SAP-XICONS component was left at the lower version. Everything else was upgraded and SUM didn't complain about this component. The component was present in the stack.xml file and the SCA was available. Yet somehow it was missed.
Now I am unable to use SUM to update the component. There seems to be no way to get the LMDB to reflect the actual versions of this system and have Maintenance Optimizer function.
After I assigned everything in the LMDB, the Verification Check says "Only assign one SAP NetWeaver product version to product system". And then MOPZ gives errors such as: "Wrong Netweaver product version found SAP NETWEAVER 7.4" and "Multiple Netweaver Product Version were found".
However, if I remove the assignment of 7.11, MOPZ is still unable to calculate the queue. It even gives the same errors.
How can I fix this? Is there some other way to generate the stack or get SUM to upgrade the component?

The root cause was MOPZ marking the component incorrectly in the stack XML.
The resolution was to use telnet to 5xx08 to manually deploy the SAP-XICONS archive.

SAP NetWeaver trial version 4.0 extending trial period error

Hello.
I have installed successfully SAP NetWeaver trial version 4.0 After 30 days of trial, it stopped working because of period licensing. I have tried to extend this period installing a NSP.txt file from SAP. A successfull message apears after installing it, but nothing change, the licensing period does not change. And, to do it easier, the user SAP* has not privilegies to liberating my transport order, so I cannot download my work. A nasty experience, doesn't it?.
Does anyone know any solution? Thank you

Yes, I have done it already. There's one tmp license that I cannot delete, and a row with my new license that I have delete, install new one, success message but does not work.
I have tried to install a new period license before ending the previous one... I guess it could have influenced. Nevertheless I will try it again.

SAP Netweaver Trial version error at stage 4

Hello,
I tried to install the SAP Netweaver trail version on my system, all the steps I followed are as per instructions. BUt I am getting into this error message, please let me know if someone can help me.
Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
vasu\sapmnt\ with type DIRECTORY: can't create parent node..
Thanks in Advance, Vish
ERROR      2006-09-11 17:47:44
           CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
vasu\sapmnt\ with type DIRECTORY: can't create parent node..
ERROR      2006-09-11 17:47:44
           CJSlibModule::writeError_impl()
CJS-30129 Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
Unable to create node
vasu\sapmnt\ with type DIRECTORY: can't create parent node..
ERROR      2006-09-11 17:47:44 [iaxxgenimp.cpp:653]
           showDialog()
FCO-00011 The step createSystemDirectories with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .
INFO       2006-09-11 17:48:18 [iaxxgenimp.cpp:692]
           showDialog()
An error occured and the user decided to rety the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories".

Hi,
I am having the same problem when installing SAP NW 2004s (Database Instance). Did you solve this problem?
ERROR      2006-10-18 10:09:48 [iaxxgenimp.cpp:736]
           showDialog() FCO-00011 The step createSystemDirectories with step key |NW_Java_DB|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .
tks.
Daniel Silva

SAP Net Weaver Version 7.0 Installation

Hello Experts,
Iu2019m totally new in SAP products and I would like to ask about the installation steps as the following:
1-Iu2019m planning to install the following SAP products in one server (16GB RAM, 1TB HDD, Win 2003):
A-Oracle Database Version 10.2
B-SAP Solution Manager Version 7.1
C-SAP Net Weaver Version 7.0
D-SAP ERP-EHP5
E-SAP Base Line
F-SAP CRM
G-SAP SRM
So, is that the right order for the installation, can I install all this products in one server as a demo server?
2-I start the installation steps and I have finished the Database setup (10.2 then patch 10.2.0.4) then installed SAP Solution Manager Version 7.1 and I select Central System Installation Type, and the installation is Finished Successfully, but after the installation I did not find any new programs under windows start menu or all programs, I just found SAP Management Console, so is that the right behavior for this type of installation or I miss something?
3-I follow up all the steps that found in Solution Manager Master Guide until post installation tasks, the first step is to logon the application server, but I did not found it in the all programs menu is that the right behavior?
Thank You And,
Best Regards.
Tarek Salama

Hi ,
Welcome to World of SAP !
Please find the suggestions for your queries .
1- Install all the products in one server is not possible .
For each product kindly go through the SAP Installation Guides available
in SAP Market Place . To be more precise kindly study the SAP architecture
basically R/3 3 tier architecture . this will answer your query regarding
installation of Database , SAP application, and Frontend (SAP GUI)
To know About installation & Master Guides of all the below listed product check the link
https://websmp209.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SWDC_ALIAS&TMPL=INTRO_SWDC&V=INST&SWDCQL=swdc&SELAREA=swdc1&SUBLEVEL=A_1_2_2
B-SAP Solution Manager Version 7.1
C-SAP Net Weaver Version 7.0
D-SAP ERP-EHP5
E-SAP Base Line
F-SAP CRM
G-SAP SRM
First of all not possible to install all the products in one server even for demo .
2- Good you have installed the solution manager Kindly follow the Product Availability Matrix PAM before installing the product.
and kindly study the basic architecture and then start installing SAP products .
3.As same as Answered above . Kindly check the links for SAP BASIS practice
SAPEDU Twitter account : http://twitter.com/sapedu
SAP Education Facebook page: http://www.facebook.com/SAPEducation
Education@SAP LinkedIn group: http://www.linkedin.com/groups?gid=1856570
To know the pam on windows : SAP on Microsoft Windows
SAP Basis Tips: http://www.sap-img.com/sap-bc.htm
SAP Books: http://www.sap-img.com/sap-books.htm
SAP Training CBT: http://www.sap-img.com/sap-training-cd.htm
SAP Jobs: http://www.sap-img.com/sap-jobs.htm
SAP help : http://help.sap.com/
About SAP : http://en.wikipedia.org/wiki/SAP_AG
http://en.wikipedia.org/wiki/SAP_R/3
regards,
S.Rajeshkumar

Installing Sap Netweaver Trial Version

Hi guys!
I have installed in my notebook a sap netweaver trial version, but I have another PC with less resources than my computer. I would like to know if there is a posibility to have the sap gui in the second PC and use some like a Sap Route in order to get connected this second notebook to sap database of my PC.
I will appreciate any help on this topic.
Thank you very much
Gabriela.

Hi Spantaleoni,
Thank you very much for your reply.
I understood everyting wht you told me
I just need some explanation about this point: Set up GUI Connection in Client PC (setting as ApplicationServer your ServerPC LAN IP)
How Can I set as application server my server pc LAN IP?
Thanks!
Gaby

MaxDB instance error sap netweaver trial version 7.0

I installed sap netweaver trial version 7.0 in e drive which has got 60 GB.netweaver and sap logon front end installed and max db also installed suscessfully
when configuring maxdb database i.e adding new instance the following error appears.
<b>-4 database instance not found</b>

Yes, I have done it already. There's one tmp license that I cannot delete, and a row with my new license that I have delete, install new one, success message but does not work.
I have tried to install a new period license before ending the previous one... I guess it could have influenced. Nevertheless I will try it again.

Sap R/3 version

Similar Messages

Maybe you are looking for