SAP R/3 versions differences

Hi Gurus,
What are the differences between SAP R/3- 4.6C, 4.7 and ECC 5.0 Version in SD Module prospective and over all SAP R/3? It has been asked in many interviews.
Hope your reply very soon,
Thanks in advance,
Regards,
Vamsi.

HI
There are so many differences between the version in different objects
I will explaint in two or more objects the differece
1 in the customer master in 4.6 version there is no partner function tab in the customer in xd01 tcode
and also there is no CIN tab in that vrsion
Re: differnce b/n 4.7 and  ecc 6.0
but itis there in the 4.7 EE version
This is the major change from the 4.6cc to 4.7EE
2. in 4.7EE there is some settings that are related for CIN
which cannot be done in 4.7EE that means they need some patches for doing the configuration setting for the CIN
But we can do the same in the 6.0 version
These are the some ofthe settings that are differed in the two versions and in that two objects
Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
Please follow the link below, you can download the Release notes for each realease of R/3 and ECC.
https://websmp210.sap-ag.de/releasenotesRelease Notes
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, QM.....
Click on Search
Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
and also check the release notes of ECC 6.0 in service.sap.com.
Hope this helps you.
<b>
Do award points if you found them useful.</b>

Similar Messages

  • Functional Differences between SAP 4.6 version and SAP 6.0 version

    What are the functional and display differences between SAP 4.6 and SAP 6.0 versions?

    There are several changes have been done... and of course it is beyond the scope to discuss in this forum area.. but the guideline can be provided here, where you can find out relevant information - Please check the following links:
    http://www.sdn.sap.com/irj/sdn/nw-70?rid=/webcontent/uuid/401a43d0-be49-2a10-a192-f03503a00825 [original link is broken]
    https://wiki.sdn.sap.com/wiki/display/ESpackages/SAPERP6.0
    Some part of earlier SAP functionality now included into separate solutions as part of NetWeaver (for e.g. HR has incorporated into HCM). Also there are several new functionality (you may say "Module" as per earlier concept) as come into picture as part of some Industry Solutions (IS). You need to install them as Add-On.
    In SMP.. go to Solution details --> Release Information .. check the information provided here.
    Sorry as I can't able to give you all Older functional module details as you wanted ... it's really tough to expedite in this short scope (as per my opinion).
    Regards,
    Dipanjan

  • We have to upgrade from SAP 4.0 version to ECC6.0(only EDI/IDOC effects)

    Hi All,
    We have to upgrde a system from SAP 4.0 version to ERP6.0, is there any difference in EDI and IDOC
    tables or their types in ERP6.0 from the 4.0 version, which we have to also consider or not.
    but if differences are there but SAP itself is taking care for that, then how the sap is taking care of that ..?
    Regards,
    Rohit Sharma
    Edited by: rohit sharma on Jun 19, 2008 1:26 PM

    I´m not sure what you mean by "old table to new table".
    The general table structure is not changed, VBAK + VBAP are still there. They may have been extended by additional fields, depending on how your system is implemented. It´s also possible, that if you activate any business function after the upgrade, that tables will get appends.
    The old IDOC structures working before the upgrade should work after the upgrade the same way since those structures are not touched.
    Markus

  • Versions difference in ecc 6.0

    Hello experts,
        What are the major and minor difference between the 4.6c and ECC 6.0
    Please tell me the diffences
    Thanks
    Raghava

    There are so many differences between the version in different objects
    I will explain in two or more objects the difference
    1 in the customer master in 4.6 version there is no partner function tab in the customer in xd01 t-code
    and also there is no CIN tab in that version
    but it is there in the 4.7 EE version
    This is the major change from the 4.6cc to 4.7EE
    2. in 4.7EE there is some settings that are related for CIN
    which cannot be done in 4.7EE that means they need some patches for doing the configuration setting for the CIN
    But we can do the same in the 6.0 version
    These are the some of the settings that are differed in the two versions and in that two objects
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
    http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    Re: Difference Between SAP Version ECC 4.6, 4.7, SAP 5.0, 6.0 with SA
    Re: SAP version differences 4.5b, 4.6c and ECC6.0
    You can find the difference in release notes of each SAP version.
    Here are the links.
    http://help.sap.com/saphelp_47x200/helpdata/en/fc/e3003deddfae4de10000000a114084/frameset.htm
    http://help.sap.com/saphelp_scm50/helpdata/en/28/b34c40cc538437e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, QM.....
    Click on Search
    Then it displays the Release Version and the Delta Functionality. which can be downloaded to a word document if required.
    and also check the release notes of ECC 6.0 in service.sap.com.
    rewards if it helps

  • Can i upgrade SAP business One  version 8.6 to 9.1

    Hi Expert,
    Can i upgrade SAP business One  version 8.6 to 9.1 directly.please assist me.
    Regards,
    Mizan

    Hi,
    There is no 8.6 version for SAP B1. Please advice correct version with PL.
    Thanks.

  • Dynamic internal table in SAP 3.1I version

    hi All,
    i am new to this form and have the following question.
    Currently i am working in SAP 3.1I version and i am required to create a dynamic internal table.
    Basically the table name will be entered by the user on the selection screen and the dynamic internal table has to be of this type (entered by user on the selection screen).
    Please let me know whether this is possible in 3.1I version and if its possible then how to achieve this.
    Note: this requirement has to be done in 3.1I version hence OO concept (ie)
         cl_alv_table_create=>create_dynamic_table doesn't work here.

    refer this demo code  -
    parameter p_table type tabname.
    field-symbols <tab> type table.
    field-symbols <tab1> type any.
    types: begin of itab,
          t_name type tabname,
          t_ref type ref to data,
          end of itab.
    data itab1 type table of itab with non-unique key t_name.
    perform fetch_data using p_table.
    perform print_table using p_table.
    *&      Form  fetch_data
          text
         -->P_P_TABLE  text
    FORM fetch_data  USING P_TABLE1 type tabname.
    data itab2 type itab.
    itab2-t_name = p_table1.
    create data itab2-t_ref type table of (itab2-t_name) .
    assign itab2-t_ref->* to <tab>.
    append itab2 to itab1.
    select * from (p_table1) up to 25 rows into corresponding fields of table <tab>.
    ENDFORM.                    " fetch_data
    *&      Form  print_table
          text
         -->P_P_TABLE  text
    FORM print_table  USING P_TABLE1 type tabname.
    DATA t_ref1 TYPE REF TO data.
    DATA itab2 TYPE itab.
    FIELD-SYMBOLS <field> TYPE ANY.
    READ TABLE itab1 INTO itab2 WITH KEY t_name = p_table1.
    ASSIGN itab2-t_ref->* TO <tab>.
    CREATE DATA t_ref1 LIKE LINE OF <tab>.
    ASSIGN t_ref1->* TO <tab1>.
    DO.
    *READ TABLE <tab> ASSIGNING <tab1> INDEX 1.
    READ TABLE <tab> ASSIGNING <tab1> INDEX SY-INDEX.
    *WRITE:/ p_table1.
    NEW-LINE.
    IF sy-subrc <> 0.
    EXIT.
    ENDIF.
    DO.
    ASSIGN COMPONENT sy-index OF STRUCTURE <tab1> TO <field>.
    IF sy-subrc <> 0.
    EXIT.
    ENDIF.
    WRITE: <field>,'    '.
    ENDDO.
    ENDDO.
    ENDFORM.                    " print_table

  • Function module to upload excel to internal table in SAP 7.0 version system

    <<Question has been asked and answered many times - please search before asking for function modules for common tasks>>
    currently i am using SAP Netweaver7.0 version, i need a Funtion Module to upload an Excel sheet data to an internal table.
    please let me know this ASAP.
    thanks,
    Edited by: Matt on Aug 24, 2009 7:25 AM

    hi,
    the FM you have suggested does not exist in the *version 7.0*
    added the FM "ALSM_....",also does not exist
    pls suggest a FM for SAP7.0 version

  • Services for Object activation required for VA02 in SAP 4.0B version

    Hello,
    This is regarding Sales Order Change (VA02) and If I select the  MENU navigation :  SYSTEM -> Services for Object in ECC 6.0 then it is populating one Pop-up stating that "Sales Order XXXXXXX" Here we have the option for "Create Attachment".
    For this we need to do one prerequist in SAP ECC 6.0 Goto Tcode SU01 under the "Parameter" Tab we need to provide the following Parameter ID i.e
    SD_SWU_ACTIVE and Parameter value is : "X".
    The Same scenario I need in SAP 4.0b version.
    It would be grateful if you can helpout in this issue.
    Than you very much in Advance ...

    Hi,
    Absolutely it is not possible.
    The services for object is only visible, once the original object is created.
    Even if you check for normal F-02 entry also, it wont be visible during entry, but will be visible after posting if we go thru FB02 or FB03.
    Any attachment can be assigned through the services for object, is possible only after creation of the dependent / original data.
    So for AS02 and AS03, the dependent data has to be there in the DB, which has been created with AS01.
    Thanks,
    Srinu

  • WebDynpro for ABAP Application in SAP-4.7 Version

    Hi,
    I am new to WebDynpro for ABAP. Can anyone tell me that Could I create any application of WebDynpro Application in SAP-4.7 version.
    Regards
    Dinesh.

    Hi Dinesh,
    Web Dynpro Tool is not available in SAP-4.7 version.
    u can create web application using BSP(business server pages which  is available in 4.7 version.) from SE80
    Web Dynpro tool is available in ECC6.0.
    To Create a web dynpro application or component Go To SE80,and select Web Dynpro component/interface from the drop down list.
    U need to Have SAP Net Weaver Installed in ur version.
    Regards,
    Lakshman
    Edited by: Lakshman N on Nov 17, 2008 1:16 PM

  • SAP BPC NW version with SAP Dashboard Design (No Local Connection)

    Dear ALL,
    I'm working on SAP BPC NW version 10.0 and I'm trying to build some dashboards on it using SAP Dashboard Design.
    So, I follow some links online and I failed to proceed at the very beginning stage:
    To create a "Local" connection in Excel EPM Add-in.
    From the drop down box for the available connection types, I can just see Planning and Consolidation versions for both MS and NW, but nothing called "Local" as referred in those web.
    Any ideas?
    BR,
    Antony

    Hi Antony,
    Go through the SAP Note 1730125.
    Check the attached doc "SAP Business Planning and Consolidation 10.0, version for SAP NetWeaver" in the note
    for more details.
    Regards,
    Javed

  • Is it possible to use Adobe Interactive Forms in SAP (ABAP) Trial Version?

    Dear All,
    i need some help concerning the usage of Adobe Interactive Forms in SAP (ABAP) Trial Version.
    I installed SAP Netweaver 7.01 (ABAP Trial Version) and i would like to use the Adobe Interactive Form editor (transaction SFP). Is this trial version prepared for this? Is it possible to edit and test Interactive Forms in the ABAP Trial Version too?
    Somebody told me that he installed Adobe Lifecycle Designer 7.1 but the layout manager part of the editor shortdumped when he wanted to go back to other  parts of the editor or he wanted to save what he did...
    Is it enough to install Adobe Lifecycle Designer 7.1? Is there something else to install or configure?
    Thank you for your help in advance.
    All the best, P. Phil.

    Yes, you need the lifecycle designer installed.  That should be enough to work with the SFP transaction.  But to actually use the form, I think you do need the ADS(Adobe Document Services) which runs on the java stack.
    Regards,
    Rich Heilman

  • "Only assign one SAP NetWeaver product version to product system"

    Greetings,
    Somehow, after upgrading my PI system from NW 7.11 to NW 7.4, the SAP-XICONS component was left at the lower version. Everything else was upgraded and SUM didn't complain about this component. The component was present in the stack.xml file and the SCA was available. Yet somehow it was missed.
    Now I am unable to use SUM to update the component. There seems to be no way to get the LMDB to reflect the actual versions of this system and have Maintenance Optimizer function.
    After I assigned everything in the LMDB, the Verification Check says "Only assign one SAP NetWeaver product version to product system". And then MOPZ gives errors such as: "Wrong Netweaver product version found SAP NETWEAVER 7.4" and "Multiple Netweaver Product Version were found".
    However, if I remove the assignment of 7.11, MOPZ is still unable to calculate the queue. It even gives the same errors.
    How can I fix this? Is there some other way to generate the stack or get SUM to upgrade the component?

    The root cause was MOPZ marking the component incorrectly in the stack XML.
    The resolution was to use telnet to 5xx08 to manually deploy the SAP-XICONS archive.

  • Sap R/3 version

    dear gurus
             how can i find a SAP R/3 version whether it is 4.6C or 4.7 0r ECC 5 etc in the system/server.
    quick reply will be awarded

    Hi kalai Anna,
    See in the menu bar
    System --> Status     in that 'Sap System data' there is screen field called 'Component Version'. It shows the version.
    Thanks and Regards,
    Dharani Kumar

  • SAP NetWeaver trial version 4.0 extending trial period error

    Hello.
    I have installed successfully SAP NetWeaver trial version 4.0 After 30 days of trial, it stopped working because of period licensing. I have tried to extend this period installing a NSP.txt file from SAP. A successfull message apears after installing it, but nothing change, the licensing period does not change. And, to do it easier, the user SAP* has not privilegies to liberating my transport order, so I cannot download my work. A nasty experience, doesn't it?.
    Does anyone know any solution? Thank you

    Yes, I have done it already. There's one tmp license that I cannot delete, and a row with my new license that I have delete, install new one, success message but does not work.
    I have tried to install a new period license before ending the previous one... I guess it could have influenced. Nevertheless I will try it again.

  • SAP Netweaver Trial version error at stage 4

    Hello,
    I tried to install the SAP Netweaver trail version on my system, all the steps I followed are as per instructions. BUt I am getting into this error message, please let me know if someone can help me.
    Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
    Unable to create node
    vasu\sapmnt\ with type DIRECTORY: can't create parent node..
    Thanks in Advance, Vish
    ERROR      2006-09-11 17:47:44
               CJSlibModule::writeError_impl()
    CJS-30129  Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
    Unable to create node
    vasu\sapmnt\ with type DIRECTORY: can't create parent node..
    ERROR      2006-09-11 17:47:44
               CJSlibModule::writeError_impl()
    CJS-30129  Creating node $(DIR_TRANS) with type DIRECTORY failed. Original exception text was: syslib.filesystem.nodeCreationFailed:
    Unable to create node
    vasu\sapmnt\ with type DIRECTORY: can't create parent node..
    ERROR      2006-09-11 17:47:44 [iaxxgenimp.cpp:653]
               showDialog()
    FCO-00011  The step createSystemDirectories with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .
    INFO       2006-09-11 17:48:18 [iaxxgenimp.cpp:692]
               showDialog()
    An error occured and the user decided to rety the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories".

    Hi,
    I am having the same problem when installing SAP NW 2004s (Database Instance). Did you solve this problem?
    ERROR      2006-10-18 10:09:48 [iaxxgenimp.cpp:736]
               showDialog() FCO-00011  The step createSystemDirectories with step key |NW_Java_DB|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createSystemDirectories was executed with status ERROR .
    tks.
    Daniel Silva

Maybe you are looking for