SAP R/3 with JOLT componant

Hi,
Does exist an adpater which permits to connect an R/3 instance to a JOLT agent ? The aim is to avoid the installation of Tuxedo on our server.
At this moment we use this :
SAP R3 - CLIENT C - tuxedo installed on the R/3 server -
we would prefer to have this :
SAP R3 - JOLT CLIENT - Middleware- tuxedo installed on the client
regards

Hi,
you use adapters to connect XI with other systems (SAP systems, legacy, ...:
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
For SAP systems you usually use RFC, IDoc or Proxies.
For your legacy systems which adapter fits best to your system and your scenario.
Regards
Patrick

Similar Messages

How to find what are the support-teams map with particular componant type

hi experts,
i am new in solution manager.. My requirement is when creating the support message in crmd_order t-code i have to give the componant type in transaction data after that in fast entry screen i have to assign support team for that componant type .. here i have to give only valid support team which are map with particular componant type .. when save the support message here i have to check that support team is map with that particular componant type (i.e that support team is belong to that componant type ) .. thats what i have to do in abap development .. so how to find the what are all the support teams mapped with particular componant type .. whether it is stored in any table or ?.. Please give solutions ..
Regards,
Kumar..

Hi Kumaresan-
I'm not sure I fully understand your requirement but I will try to help out. If you are trying to determine / associate the relevant support team according to which component they are responsible for, this might help.
The determination of the support team is maintained by configuring rule 13200137 in transaction PFAC_RESPO.
Click on the Responsibilities Tab
Create your responsibility based on your support team requirements
Assign the appropriate Support Team, this data will be taken from the settings you have maintained when creating your org chart in ppoma_crm
Highlight a responsibility and click Change
In this table you will see an entry for SAP Component, this is where you identify which support team will be determined based on component

Enhancing standard component with new component usage

Hi!
I try to enhance standard component /SAPSRM/WDC_AOFC_BEV with new component usage (say, SALV_WD_TABLE). It allows me to add new usage, but the usage does not appear in the "Component Usages" tree node.
Is it a bug? Is it possible to enhance a standard component with new component usage?

Hi Thomas!
We've been communicating with SAP on this issue for a while and last response we obtained is next:
Dear customer,
the possibility to create external controller usages (as required for
the ALV-usage) is not supported by the Web Dynpro ABAP development
tools. However, you could try a programmatic apporach by adding the
ALV-usage dynamically (e.g. in methods or method exits created within
your enhancement implementation).
See test component WDR_TEST_DYN_ALV_USAGE for details.
What's your opinion on this? Is it really not a bug?

Replacing SAP Object Selector with Radio Button in ALV table in WD ABAP

Hi All,
I have a view in Webdynpro ABAP which displays data in an ALV table view (using SALV_WD_TABLE component).
By default we have the SAP Object Selector for selecting a particular row of the table. This has to be replaced with radio buttons.
I mean instead of using the SAP Object Selector, I need radio buttons at the start of each row.
What I have thought of is to make the SAP Object Selector Invisible and create another attribute for the radio button in the node which contains ALV output data.
Can you please let me know how to remove the SAP Object Selector from ALV output table and also how to include a column with radio button in the ALV output table.
Thanks and Regards,
Sayan Ghosh

Hi Lekha,
I am working with HRASR00_PROCESS_EXECUTE WD component of MSS application. In order to generate the data, this in turn calls another component called DATAOBJECTPROVIDER. I need to make the table selection as none and replace the SAP Object Selector with the radio button.
Do you know under which method in DATAOBJECTPROVIDER do we need make the changes. I tried to search all the methods but couldnt understand a suitable one.
Thanks and Regards,
Sayan Ghosh

SAP B1 8.81 Integration Component

Hello everyone!
Has someone experience in installing SAP B1 8.81 Intergation Component?
I have a some issues I cannot solve:
1.Error: during installing DI Proxy Service - error message appears: Could not create Java virtual machine
Java JDK, and JRE installed successfully.
2.After getting this error message, during the Event sender setup the Test connection fails.
I cannot connect to SLD as well, internet explorer cannot find the page. (i guess it is because the JAVA virtual machine error)
3.If i browse for Tomcat server , i can see it is running. (in web browser)
4. In windows services, the integration service is not started, and I cannot start it, because it returns an error message: "Windows cannot start the service...
I have the following environment:
Server: WIN server 2003-Enterprise edition SP2
Database: MS SQL 2008
SAP B1: SAP B1 8.81.305 PL:00
Any help or advice is welcome.
Thanks in advance:
Otto

Hello Eddy,
the problem was not with the Java version. I installed the correct version.
I solved my problem, since it was a new server, the .net framework was not preinstalled.
You need .NET to use integration component. After i installed it, i had to completly reinstall IC, and every problem solved.
Thanks for your reply anyway.
Best regards,
Otto

Download SAP businessobject edge with DI xi3.2

Hi all,
I manage to find the download for SAP business edge DS XI3.2 but i am unable to find the download for the businessobject edge xi3.2. Can anyone plese advice me where i can download the BUsinessobject edge xi3.2. THanks.
Regards.

The correct download path is:
Installations and Upgrades >> Entry by Application Group >> SAP BusinessObjects portfolio >> SBOP DQM FOR SAP SOLUTIONS >> BOBJ DQM FOR SAP SOL. XI3.1
But it looks like you don't have this entry when you login to SMP. So this means you company's account is not linked to a valid contract from DQM for SAP ERP/CRM. To fix this, you should open a support ticket with the component XX-INT-DATA, this will route your message to the order management/contract team who can figure out what the issue is.

Send/Receive IDOCs (XML) from/to SAP R/3 with XI-SOAP without XI!

Dear SAP specialists,
(BACKGROUND) We are using the Microsoft BizTalk Adapter for SAP 1.0, developed on top of the SAP DCOM Connector (we are using the version 6.20 Patch Nr. 177), with Microsoft BizTalk Server 2002 SP1 in order to send and receive IDOC via the tRFC transport protocol. We are using the Microsoft BizTalk Adapter for SAP 1.0 since February 2002, and today we are exchanging more than 25,000 IDOC/day with this architecture.
When we migrate our SAP R/3 system to the version 4.7 with WAS 6.20, I was very enthusiastic about the possibility of sending the IDOC in XML via the standard HTTP transport protocol, because it would considerably simplify my architecture, i.e. no need of any (expensive) adapter any more! But, I had to realise that the quality of service exactly once will not be there anymore with HTTP as it exists with tRFC. Then, we carry on using the tRFC transport protocol with the adapter.
(QUESTION) But recently, I followed the SAP Course TBIT40 XI Foundations and I learn that:
1. On one hand, the XI-SOAP protocol supports the quality of service exactly once by the usage of a message GUID within the XI-SOAP envelope;
2. On the other hand, all mySAP solutions using WAS 6.20 (or higher) carry a small Integration Engine (with XI-SOAP as the native transport protocol).
Then, my question is: << Is it possible to exchange IDOC (XML) directly with an SAP R/3 4.7 (WAS 6.20) via the XI-SOAP transport protocol using the small Integration Engine embedded into it, with the quality of service exactly once? >>
Many thanks in advance and best regards,
Patrice Krakow

Hello Patrice
We have same issue. Is it possible to use IDoc (XML) directly with SAP 5.0 with SOAP (HTTP) without XI?
Since your que is three years old, I'm sure you must have found some method for this.
We'll highly appreciate your help.
Regards: Gaurave

How can I do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder which does not have firewire out/input? it comes only with a component video output, USB, HDMI and composite RCA output?

I need to do live streaming with a Mac Book Pro 2011, using a new model of Sony HD camcorder (http://store.sony.co...ber=HDRAX2000/H) ..this camcorder model does not have firewire out/input ..it comes only with a component video output, USB, HDMI and composite A/V video output..
I wonder how can I plug this camcorder to the firewire port of my laptop? Browsing on internet I found that Grass Valley Company produces this converter http://www.amazon.co...=A17MC6HOH9AVE6 ..but I am not sure -not even after checking the amazon reviews- if this device will send the video signal through firewire to my laptop, in order to live streaming properly? ..anyone in this forum could help me please?
Thanx

I can't broadcast with the built in iSight webcam... how would I zoom in or zoom out? or how would I pan? I've seem people doing it walking with their laptops but that's not an option for me... there's nothing wrong with my USB ports but that's neither an option to stream video because as far as I know through USB you can't connect video in apple operating systems ..you can for sure plug any video cam or photo camera through usb but as a drive to transfer data not as a live video camera... is by firewire an old interface developed by apple that you can connect all sorts of cameras to apple computers... unfortunately my new sony HDR-AX2000 camcorder doesn't have firewire output...
thanx

How to connect Apple TV (2g) HDMI to HDTV with only component video input.

Trying to connect Apple TV (2g) HDMI to HDTV with only component video input. Can I use a simple cable or do I need a converter box/plug? Is the HDMI signal coming from ATV encrypted or HDCP enabled?
The TV is HD, but only has a component input and not HDMI. Apple TV 2g only has HDMI output.

google component hdmi converter
but they are pretty expensive and may not work at all
and will not work with any DRM material as in movies you reant and maybe netflix and the sports thingy

Execution of Reports phase error during SAP EHP4 upgrade with EHPi

I started getting an error message in the "Execution of reports after put" phase
(within the Downtime phase) during the SAP EHP4 upgrade with Enhancement
Package Installer.
***** LIST OF ERRORS
AND RETURN CODES *****
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~XPRA ERRORS and RETURN CODE in SAPRB70104.OPQ
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~1AETR012XProgram terminated (job: "RDDEXECL", no.: "09064300") Long
text: Cause Program "&V#&", which was started in the background, was
terminated abnormally. System Response The system created a job log for
the terminated program. What to do Proceed as follows: Log onto the
system in which the program was executed. The system is specified at the
beginning of the transport log. Then call transaction SM37 to display the
job log. Enter "&V#&" as job name and "DDIC" as user name. Restrict the
starting date to the starting date specified in the transport log. For
the other selection criteria, select only jobs with the status
"cancelled". Then press <LS>Execute</>. A list of the jobs satisfying the
selection criteria is displayed. You can display the log by pressing
<LS>Job log</>. If the list contains several jobs, you can select the job
with the ID " &V#&" with <LS>Display</> -> <LS>Job details</> or define
further details for the selection criteria in the initial screen of
transaction SM37. If the ABAP processor reports cancellation,
double-clicking on the corresponding message in the job log branches to
the display of the corresponding short dump. 1AEPU320 See job
log"RDDEXECL""09064300""OPQ" 1 ETP111 exit code : "12" >>> PLEASE READTHE REPORT DOCUMENTATION OF THE REPORTS MENTIONED ABOVE <<< XPRAs are
application reports that run at the end of an upgrade.
Most XPRA reportshave a report documentation that explains what the report does and how
errors can be corrected. Call transaction se38 in the SAP system, enter
the report name, select 'Documentation' and click the 'Display' button.
>>> The problematic XPRAs are mentioned in messages of type PU132 above
<<<
I tried to follow the instructions in note 1269960, but the enhancement spot
CLASSIFICATION_TOOL was already active. I activated it again and reran the phase
but got the same error. Also, I couldn't implement the note using SNOTE because it is
the middle of the upgrade process.
I also found the following long text in ST22
"Internal error during syntax check: ("//bas/710_REL/src/krn/gen/scsymb.c#11"
Processing had to be terminated because an internal error
occurred when generating the ABAP/4 program
"CL_CLS_BADI_CHARACTERIZATION==CP".
The internal system error cannot be fixed by ABAP means only."
I am on a 64 bit System with CentOS Linux. 8 GB RAM, 250 GB HD with 20 GB free space.
So far, I could not find any information on this. Any help would be greatly appreciated!
Thanks,
Victor

Hi Victor,
Go to SM37 and put in the username as DDIC and see the job log.
Also check Sm50 and see whether you have BTC processes available.
Last but not the least check your filesystem space usage too.
Gerard

Sub-contracting with chargeable component.

Hi All,
I am doing following scenario
Scenario: Sub-contracting with chargeable component.
Activity: Clearing (Consumption-Based)
T Code - /n/SAPNEA/JSCR19
Amount: 23,100,000
While action posting, we are getting following error message
Error Message: E The difference is too large for processing
Kindly suggest where to do necessary changes in the system.
Rahul

Hi,
This procedure provides the way of manual payment for Subcontract expense.
I want to clear Accrued revenue by deduction AP using T code /n/SAPNEA/JSCR19
While posting, I am getting error message Amount too large to clear", maybe the system set the limit for the tolerance value for clear document. Please suggest me, where to change the settings.
Rahul

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

How do I integrate SAP R/3 with an external system?

Hi there!
I've run into a problem integrating SAP R/3 with an external system. The external system provides a webservice, and when I try to get WSDL file from that service, I am getting asked of authorization and when I authorize, I get error 500. The access is anonymous, as I'm being told. When I try to get just a response, server requests authorization. No matter what login and password I supply, I always get error 401 saying I'm not authorized.
I think the ICF is somewhat misconfigured, but how do I configure it? Or maybe there's a problem with requests I send. I don't know.
Please help!
Regards, Dima

Hi,
You don't provide any info on how you want to cosnume the web service, but pls check things like
/people/thomas.jung3/blog/2005/04/21/webservice-navigator-page-for-abap-and-java
/people/thomas.jung3/blog/2005/04/27/webservice-navigator-page-for-abap-and-java-part-2--abap-unit
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Eddy
PS.
Put yourself on the SDN world map (http://sdn.idizaai.be/sdn_world/sdn_world.html) and earn 25 points.
Spread the wor(l)d!

How to take the data from excel list to sap r/3(with time interval)

hi experts,
   how to transfer the data from a third party system(if it is in format of excel) to sap r/3.with that in a particular time interval,it will delete the data from excel sheet.

Hi
use the Fm
'ALSM_EXCEL_TO_INTERNAL_TABLE'
       EXPORTING
            filename                = p_path
            i_begin_col             = '1'
            i_begin_row             = '2'
            i_end_col               = '2'
            i_end_row               = '500'
      giving the starting row and column and passing the ending row and column name
Reward points if useful........
Regards,
Nitin Sachdeva

Integrate data from SAP R/3 with iDOC

Hi,
I need extract data from SAP R/3 with the iDoc method, but I can't found documentation from oracle where explain it how do it?, just I know that for this method ODI use two agent (OdiSAPALEServer and OdiSAPALEClient) and they are part of Open Connector for SAP R/3, so anybody that can help me with this issue?, I will be very grateful, just I need some orientation about how to do it?, for example, I need to be clear if the Open Connector for SAP R/3 is part of ODI or I need iinstall other special connector, etc.
I will be expecting for any answer that can help me.
Best regards

Hi Rodrigoalegrem,
Below llink will helps you for
*Oracle Data Integrator
Getting Started with SAP ABAP ERP Adapter
10g Release 3 (10.1.3)*
URL: http://www.oracle.com/technetwork/middleware/data-integrator/overview/odigs-sapabap-168070.pdf
Regards,
Phanikanth

SAP R/3 with JOLT componant

Similar Messages

Maybe you are looking for