SAP rdisp/gui_auto_logout
Hi All,
I would like to know about SAP gui auto logout time for example x amount of time. We have max gui session are 6 as default. If some user opens 6 sessions and works in 2 only and other 4 are idle. Does it terminate 4 those are idle after the x amount of time?.
It does not heppens in 4.7. Could you confirm that is possible in ECC5 or ECC6.
Thanks,
Harish
Hi,
Auto logout session is not session dependent, that is user id dependent.
That will not terminate all sessions if user is working with other session, means user is in active mode with one of the session.
Regards
Nick Loy
Similar Messages
-
Rdisp/gui_auto_logout does not consider uploading
hi experts,
I set the rdisp/gui_auto_logout to 10 mins for testing. My problem is that it got me disconnected while in the middle of uploading. It seems it counts uploading as idle. Is there any way to drop idle sessions but not those in the middle of uploading data?
Thank you in advance!Hi Karshbax,
Please go through the link. Here it says this parameter works upon idle time.
http://help.sap.com/saphelp_nw04/helpdata/en/22/41c43ac23cef2fe10000000a114084/content.htm
It says:
rdisp/gui_auto_logout:
Defines the maximum idle time for a user in seconds (applies only for SAP GUI connections).
Default value: 0 (no restriction); permissible values: any numerical value
Hope it clarifies. Let us know if it is helpful.
Regards,
Sujit. -
Configure rdisp/gui_auto_logout message
Hi,
Anybody knows if it is possible to configure the message that the system shows when it logs out a user due to long inactivity time (set with the parameter rdisp/gui_auto_logout )?
Thanks,
Best Regards,
Nahum.Hi Karshbax,
Please go through the link. Here it says this parameter works upon idle time.
http://help.sap.com/saphelp_nw04/helpdata/en/22/41c43ac23cef2fe10000000a114084/content.htm
It says:
rdisp/gui_auto_logout:
Defines the maximum idle time for a user in seconds (applies only for SAP GUI connections).
Default value: 0 (no restriction); permissible values: any numerical value
Hope it clarifies. Let us know if it is helpful.
Regards,
Sujit. -
Setting Profile parameter rdisp/gui_auto_logout value
Hi All,
The present value for the profile parameter value rdisp/gui_auto_logout is 1200 sec, now i would like to change the value from 1200 sec to 2400 sec.
can change the value directly in parameter value field (using T-code RZ10) or can i create a new parameter value?
Please any one give me the suggestions how to reset the value for this profile parameter
Regards,
Reddy V,Hello reddy,
This rdisp/gui_auto_logout parameter can be changed dynamically too you can change the value via RZ11 if you dont want to restart your server now. but in this case whenever you will restart your server the parameter value will be set back to the original state
change it via RZ10 but in this case you have to start the server to activate this value
Select Change in instance profile via RZ10 and select extended maintainance then click on create parameter and enter the parameter name there and press enter, it will show you the current value then insert the new value and save and activate the profile.
Regards
Subhash -
I've had enough complaints that I beginning to think there is something wrong. I have the value of this parameter set to 14400.....SOX mandate. Users complainting they are well within the time value, but SAP is ending their sessions. SAPNET search shows nothing. Anyone else having this type problem?
Hi Jerry,
As Rich has pointed out, it should work as defined. We have exactly same setting for exactly same reason, and it has been working fine since 4.6C.
The only thing I can guess is that it is not correctly configured on all instances. Use Tcode RZ11 to reset this parameter dynamically and globally?
Good luck,
Victor Lin -
Hi , all
Now , i am using SAP GUI710 , Patch level 3, i have an issue , if i leave the sec untouched for about 5 minutes , GUI will log off itself , and give me this information:
CD1: connection to partner " ..........: sapdp00" broken
WSAECONNRESET: connection reset by peer
though i can logon again , but this really boring me , every 5 minute , if no activity , then auto logoff and i need to logon again.
what is the problem , how to fix this ? thanks.Hello,
If this happens for all the users , pl check the SAP instance parameter value rdisp/gui_auto_logout.
If it is 0 there wont be any auto log out.
set the value in seconds means if you set it at 300 it will log out automaticaly after 5 secs.
Pl try this . Dont forget to restart the server after making the changes.
Award if resolved.
Regards -
SAP ECC 6.0 System Performance
Gentlemen,
Please advise me with the following scenario, which is Iu2019m facing a problem with system performance,
My system configuration is: SAP ECC 6.0
Database System: Oracle 10.2.0.2.0.
Server Configuration: Power 6
Processor Type: PowerPC_POWER6
Processor Implementation Mode: POWER 6
Processor Version: PV_6_Compat
Number Of Processors: 6
Processor Clock Speed: 3503 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
LPAR Info: 2 PRODUCTION
Memory Size: 47104 MB
Good Memory Size: 47104 MB
Platform Firmware level: EL340_039
Firmware Version: IBM,EL340_039
The following Information was generated from TCode: sm51:
SAP Release Information
Application Server SAPPRD_PRD_00
SAP Kernel Information
SAP Kernel : 700_REL
Database Client Library : OCI_101
created in : AIX 2 5 005DD9CD4C00
Support Level : 0
Kernel Patch number : 202
Source ID : 0.202
DBSL Patch No. : 046
ICU Version : 3.0 Unicode Version 4.0.1
libsapu16 Version : 1.0025 Apr 8 2009 16:21:08
Supported Environment
SAP Database Version
700
Database
ORACLE 9.2.0..
ORACLE 10.1.0..
ORACLE 10.2.0..
Operating System
aix 1 5
aix 2 5
aix 3 5
aix 1 6
My active parameter in Tcode : RZ10 as follow:
Parameter Name Parameter value
login/accept_sso2_ticket 1
login/create_sso2_ticket 2
rsau/enable 1
login/failed_user_auto_unlock 0
login/fails_to_user_lock 5
gw/max_sys 2000
gw/max_overflow_size 25000000
rdisp/max_comm_entries 2000
rdisp/tm_max_no 2000
gw/max_conn 2000
rdisp/max_arq 2000
ES/SHM_SEG_COUNT 8192
ES/SHM_USER_COUNT 8192
ES/SHM_SEG_SIZE 2048
ES/TABLE SHM_SEGS
ztta/short_area 4000000
em/global_area_MB 256
zcsa/db_max_buftab 10000
sap/bufdir_entries 10000
enque/table_size 60000
rsdb/obj/large_object_size 35000
rsdb/obj/max_objects 45000
rsdb/obj/buffersize 150000
rdisp/gui_auto_logout 0
login/password_expiration_time 0
rdisp/max_wprun_time 25000
login/multi_login_users CICUSER,TALSAYED,ASALAM
login/disable_multi_gui_login 1
SAPSYSTEMNAME PRD
SAPSYSTEM 0
INSTANCE_NAME DVEBMGS00
DIR_CT_RUN $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE $(DIR_INSTANCE)/exe
PHYS_MEMSIZE 8000
exe/saposcol $(DIR_CT_RUN)/saposcol
rdisp/wp_no_dia 70
rdisp/wp_no_btc 20
exe/icmbnd $(DIR_CT_RUN)/icmbnd
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
rdisp/wp_no_enq 1
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 2
rdisp/wp_no_spo 10
abap/buffersize 9900000
zcsa/table_buffer_area 108003328
rtbb/buffer_length 60000
rsdb/cua/buffersize 24000
zcsa/presentation_buffer_area 28166144
rdisp/appc_ca_blk_no 2000
rdisp/wp_ca_blk_no 1000
rsdb/ntab/entrycount 68500
rsdb/ntab/ftabsize 100000
rsdb/ntab/irbdsize 20000
rsdb/ntab/sntabsize 3995
DIR_ROLL /usr/sap/PRD/DVEBMGS00/data
DIR_PAGING /usr/sap/PRD/DVEBMGS00/data
DIR_DATA /usr/sap/PRD/DVEBMGS00/data
DIR_REORG /usr/sap/PRD/DVEBMGS00/data
DIR_TRANS /usr/sap/trans
DIR_TEMP /tmp
DIR_SORTTMP /usr/sap/PRD/DVEBMGS00/data
zcsa/system_language E
zcsa/installed_languages AE
abap/use_paging 0
ztta/roll_first 1024
rdisp/keepalive_timeout 8000
ztta/roll_area 9000960
rdisp/ROLL_SHM 16384
rdisp/ROLL_MAXFS 32768
rdisp/PG_SHM 16384
rdisp/PG_MAXFS 200064
abap/heap_area_dia 2012217344
abap/heap_area_nondia 2012217344
abap/heap_area_total 2012217344
abap/heaplimit 40894464
abap/swap_reserve 20971520
ztta/roll_extension 2101346304
em/initial_size_MB 4092
em/blocksize_KB 4096
em/stat_log_size_MB 20
em/stat_log_timeout 0
login/no_automatic_user_sapstar 0
login/system_client 100
icm/server_port_1 PROT=SMTP,PORT=8025,TIMEOUT=180
rdisp/start_icman TRUE
icm/host_name_full SAPPRD.tmg.dom
install/codepage/appl_server 4102
ipc/shm_psize_10 500000000
ipc/shm_psize_14 0
ipc/shm_psize_18 0
ipc/shm_psize_19 0
ipc/shm_psize_30 -10
ipc/shm_psize_40 500000000
ipc/shm_psize_41 0
ipc/shm_psize_51 -10
ipc/shm_psize_52 -10
ipc/shm_psize_54 -10
ipc/shm_psize_55 -10
ipc/shm_psize_57 -10
ipc/shm_psize_58 -10
I already generated EWA report and I got the following result:
1. Performance Overview PRD
The performance of your system was analyzed with respect to average response times and total workload. We have detected some problems that may impair system performance.
To ensure adequate performance in your core business transactions, you should take corrective action as soon as possible. For further information, please SAP Support.
Rating Check
Performance Evaluation
The following table shows the average response times for various task types:
Task type Dialog Steps Avg. Resp. Time in ms Avg. CPU Time in ms Avg. Wait Time in ms Avg. Load Time in ms Avg. DB Time in ms Avg. GUI Time in ms
DIALOG 212990 1595.2 257.7 31.0 5.0 622.2 136.8
RFC 2904 11876.4 192.1 33.1 1.4 10574.2 0.0
UPDATE 86257 116.1 28.4 2.1 2.9 58.1 0.0
UPDATE2 1100 84.6 16.9 1.3 1.4 48.2 0.0
BATCH 11600 189360.5 46218.1 5.5 3.7 132313.5 0.0
SPOOL 9989 1686.8 37.1 55.6 0.3 49.2 0.0
1.1. Current Workload
The following table lists the number of current users (measured from our workload analysis) in your system.
Users Low Activity Medium Activity High Activity Total Users
Measured in System 162 119 6 287
1.2. Performance Evaluation
The measured times are compared against reference times to provide a rating.
- If the number of dialog steps in an hour is less than 1000 this hour is not considered.
- If the total number of transaction steps is less than 24000, the rating for the task is not performed and a blue line is entered in the table.
The table below shows that a performance problem is expected for the task that is rated YELLOW.
Task Steps Application Server Performance Database Server Performance
Dia 212987
Upd 86257
HTTP 0
Rating Task Time Steps Avg. Response Time (ms) Avg. CPU Time (ms) Avg. Database Time (ms)
Dia 08-09 3726 1343 137 889
Dia 09-10 19990 1003 174 620
Dia 10-11 20603 1747 112 630
Dia 11-12 27934 2437 239 612
Dia 12-13 18921 2737 235 858
Dia 13-14 21579 2163 349 549
Dia 16-17 22529 1134 230 703
Dia 17-18 12189 1709 561 991
Dia 19-20 5840 1550 414 967
Dia 20-21 4951 1294 176 454
The ratings in the table above are determined by comparisons against the reference table below.
If the dialog response times are very poor, it will cause a RED rating for the entire check.
Task Reference for Avg. Response Time (ms) Reference for Avg. DB time (ms)
Dia 1200 600
Upd 2400 1200
HTTP 1200 600
1.3. Transaction Profile Check
The following tables show the response times and the number of dialog steps for the transactions that cause the highest workload in your system. NOTE: A business transaction normally consists of more than one dialog step. As a rough estimate, the actual number of business transactions that are executed in your system is approximately one third of the total dialog steps shown. (Transaction CPIC/RFC is not taken into account.)
1.3.1. Transactions by Total Workload
The following tables list the activities with the highest contribution to the total workload.
WORKLOAD BY TRANSACTION (DIALOG/UPDATE)
Transaction Type Dialog Steps Total Resp. Time in % Avg. Resp. Time in ms Avg. CPU Time in ms Avg. DB Time in ms Avg. GUI Time in ms
Total 299247 100.0 1168.9 191.7 459.6 136.8
ZFIBB DIA 8592 11.1 4522.4 2258.5 633.4 30.1
ZFIRP DIA 6641 7.3 3858.0 1089.7 1162.6 50.0
RECN DIA 11644 6.8 2047.9 129.1 1165.8 202.6
SESSION_MANAGER DIA 8972 5.7 2226.9 80.2 244.2 458.2
ZFICCR DIA 4834 5.2 3775.9 138.4 2535.9 195.6
ZRECPD DIA 8895 4.6 1790.1 85.9 525.3 329.4
FBL3N DIA 10414 4.1 1386.7 109.3 971.8 49.1
ZFIOBC2 DIA 852 3.4 13909.2 2675.7 9302.3 1028.7
ZREOR DIA 2241 3.3 5216.1 2246.2 808.1 357.5
ZFIOB DIA 1176 3.2 9503.7 51.3 8287.0 753.4
38.1% of the "Total Resp. Time" in the above table is caused by customer transactions.
WORKLOAD BY TRANSACTION (BATCH/SPOOL)
Transaction Type Dialog Steps Total Resp. Time in % Avg. Resp. Time in ms Avg. CPU Time in ms Avg. DB Time in ms
Total 21492 100.0 102913.8 24939.7 71399.3
SBIE0001 BTC 36 98.7 60613763.4 14848709.4 42408448.0
ZFIPR SPO 448 0.2 7939.6 169.9 387.1
(BATCH) BTC 7368 0.2 478.4 7.5 22.2
ZFIADCA SPO 486 0.1 5733.7 168.6 177.9
RSAL_BATCH_TOOL_DISPATCHING BTC 96 0.1 23895.0 1964.7 21770.3
ZFIJV SPO 309 0.1 6092.5 107.7 89.5
SAPRSLOG BTC 4 0.1 318475.8 69165.0 257824.5
ZRE_GENERATE_COND_RO BTC 5 0.1 250075.0 3336.0 237287.8
ZRE_AUTO_REJECT_OFFER BTC 20 0.1 57062.0 339.0 54977.8
ZRE_TRANSFER_TOCONT_UPL BTC 346 0.0 3161.3 941.6 2327.7
0.6% of the "Total Resp. Time" in the above table is caused by customer transactions.
According to our analysis, the main system load is caused by background jobs.
The EarlyWatch Alert Service can only detect performance problems for dialog, update and RFC response times. This service does not evaluate performance problems for background jobs.
1.3.2. Transactions by DB Load
The following transaction profiles list the transactions that have the greatest share in the database load, sorted by percentage of total database access times.
DATABASE LOAD BY TRANSACTIONS (DIALOG/UPDATE)
Transaction Type Dialog Steps Total DB Time in % Avg. DB Time in ms
Total 299247 100.0 459.6
RECN DIA 11644 9.9 1165.8
ZFICCR DIA 4834 8.9 2535.9
FBL3N DIA 10414 7.4 971.8
ZFIOB DIA 1176 7.1 8287.0
ZRECCR DIA 1504 7.0 6368.3
ZFIOBC2 DIA 852 5.8 9302.3
ZFIRP DIA 6641 5.6 1162.6
ZFIBB DIA 8592 4.0 633.4
ZFIREMTCH DIA 73 3.5 66443.6
ZRECPD DIA 8895 3.4 525.3
45.3% of the "Total DB Time" in the above table is caused by customer transactions.
DATABASE LOAD BY TRANSACTIONS (BATCH/SPOOL)
Transaction Type Dialog Steps Total DB Time in % Avg. DB Time in ms
Total 21492 100.0 71399.3
SBIE0001 BTC 36 99.5 42408448.0
RSAL_BATCH_TOOL_DISPATCHING BTC 96 0.1 21770.3
ZRE_GENERATE_COND_RO BTC 5 0.1 237287.8
ZRE_AUTO_REJECT_OFFER BTC 20 0.1 54977.8
SAPRSLOG BTC 4 0.1 257824.5
ZRE_TRANSFER_TOCONT_UPL BTC 346 0.1 2327.7
RSPO1043 BTC 4 0.0 143273.5
ZFIPR SPO 448 0.0 387.1
(BATCH) BTC 7368 0.0 22.2
ZFIADCA SPO 486 0.0 177.9
0.3% of the "Total DB Time" in the above table is caused by customer transactions.
Please advice.
Regards,
AhmedGentlemen,
Please advise me with the following scenario, which is Iu2019m facing a problem with system performance,
My system configuration is:
SAP ECC 6.0 , Oracle 10.2.0.2.0 , Kernel Patch number : 202 , DBSL Patch No. : 046
Server Configuration:
Power 6 , Processor Type: PowerPC_POWER6 , Processor Implementation Mode: POWER 6 , Processor Version: PV_6_Compat , Number Of Processors: 6 , Processor Clock Speed: 3503 MHz , CPU Type: 64-bit , Kernel Type: 64-bit , LPAR Info: 2 PRODUCTION , Memory Size: 47104 MB , Good Memory Size: 47104 MB , Platform Firmware level: EL340_039 , Firmware Version: IBM,EL340_039
My active parameter in Tcode : RZ10 as follow:
Parameter Name Parameter value
rsau/enable 1
login/failed_user_auto_unlock 0
login/fails_to_user_lock 5
gw/max_sys 2000
gw/max_overflow_size 25000000
rdisp/max_comm_entries 2000
rdisp/tm_max_no 2000
gw/max_conn 2000
rdisp/max_arq 2000
ES/SHM_SEG_COUNT 8192
ES/SHM_USER_COUNT 8192
ES/SHM_SEG_SIZE 2048
ES/TABLE SHM_SEGS
ztta/short_area 4000000
em/global_area_MB 256
zcsa/db_max_buftab 10000
sap/bufdir_entries 10000
enque/table_size 60000
rsdb/obj/large_object_size 35000
rsdb/obj/max_objects 45000
rsdb/obj/buffersize 150000
rdisp/max_wprun_time 25000
DIR_CT_RUN $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE $(DIR_INSTANCE)/exe
PHYS_MEMSIZE 8000
exe/saposco $(DIR_CT_RUN)/saposcol
rdisp/wp_no_dia 70
rdisp/wp_no_btc 20
exe/icmbnd $(DIR_CT_RUN)/icmbnd
rdisp/wp_no_enq 1
rdisp/wp_no_vb 2
rdisp/wp_no_vb2 2
rdisp/wp_no_spo 10
abap/buffersize 9900000
zcsa/table_buffer_area 108003328
rtbb/buffer_length 60000
rsdb/cua/buffersize 24000
zcsa/presentation_buffer_area 28166144
rdisp/appc_ca_blk_no 2000
rdisp/wp_ca_blk_no 1000
rsdb/ntab/entrycount 68500
rsdb/ntab/ftabsize 100000
rsdb/ntab/irbdsize 20000
rsdb/ntab/sntabsize 3995
abap/use_paging 0
ztta/roll_first 1024
rdisp/keepalive_timeout 8000
ztta/roll_area 9000960
rdisp/ROLL_SHM 16384
rdisp/ROLL_MAXFS 32768
rdisp/PG_SHM 16384
rdisp/PG_MAXFS 200064
abap/heap_area_dia 2012217344
abap/heap_area_nondia 2012217344
abap/heap_area_total 2012217344
abap/heaplimit 40894464
abap/swap_reserve 20971520
ztta/roll_extension 2101346304
em/initial_size_MB 4092
em/blocksize_KB 4096
em/stat_log_size_MB 20
em/stat_log_timeout 0
install/codepage/appl_server 4102
ipc/shm_psize_10 500000000
ipc/shm_psize_14 0
ipc/shm_psize_18 0
ipc/shm_psize_19 0
ipc/shm_psize_30 -10
ipc/shm_psize_40 500000000
ipc/shm_psize_41 0
ipc/shm_psize_51 -10
ipc/shm_psize_52 -10
ipc/shm_psize_54 -10
ipc/shm_psize_55 -10
ipc/shm_psize_57 -10
ipc/shm_psize_58 -10
I already generated EWA report and I got the following result:
Performance Evaluation
The following table shows the average response times for various task types:
Task type Dialog Avg. Resp. Avg. CPU Avg. Wait Avg. Load Avg. DB Avg. GUI
DIALOG 212990 1595.2 257.7 31.0 5.0 622.2 136.8
RFC 2904 11876.4 192.1 33.1 1.4 10574.2 0.0
UPDATE 86257 116.1 28.4 2.1 2.9 58.1 0.0
UPDATE2 1100 84.6 16.9 1.3 1.4 48.2 0.0
BATCH 11600 189360.5 46218.1 5.5 3.7 132313.5 0.0
SPOOL 9989 1686.8 37.1 55.6 0.3 49.2 0.0
1.1. Current Workload
The following table lists the number of current users (measured from our workload analysis) in your system.
Low Activity Medium Activity High Activity Total Users
162 119 6 287
1.2. Performance Evaluation
Task Time Steps Avg. Response Avg. CPU Avg. Database
Dia 08-09 3726 1343 137 889
Dia 09-10 19990 1003 174 620
Dia 10-11 20603 1747 112 630
Dia 11-12 27934 2437 239 612
Dia 12-13 18921 2737 235 858
Dia 13-14 21579 2163 349 549
Dia 16-17 22529 1134 230 703
Dia 17-18 12189 1709 561 991
Dia 19-20 5840 1550 414 967
Dia 20-21 4951 1294 176 454
Task Reference for Avg. Response Time (ms) Reference for Avg. DB time (ms)
Dia 1200 600
Upd 2400 1200
HTTP 1200 600
Please advice.
Regards,
Ahmed -
"Page Not Found" Error after arnd 5 mins of processing on SAP Trans iView
Hello All,
We are facing an issue related to a SAP Transaction iView on our portal.
This transaction is supposed to upload an excel file in RPM and provide a log after the upload is performed. We are trying to upload around 180 projects and the processing goes on in the backend. The program in the backend works as required, but as the iView shows a page not found after around 5-6 mins of processing, the users cannot see the logs in the end!
I suppose there should be some kind of time-out parameter for the Transaction type iView, but we are not able to figure it out!!
We have tried the following parameters without success:
icm/server_port_0 = PROT=HTTP, PORT=8035, TIMEOUT=3600, PROCTIMEOUT=3600
icm/keep_alive_timeout (sec.) = 3600
icm/conn_timeout = 5000
rdisp/plugin_auto_logout = 1800
Please do suggest if there is anything else that we need to update to get this process to continue on the Portal and avoid the 'Page Not Found' issue.
Thank you for your time!
Regards,
GauravHello George,
Thank you for the quick reply. I will surely try the option suggested by you.
But what i was thinking is that as this is not a Connection Time Out (500) error, instead its a Page Not Found error, it would be Session-Timeout and not Connection Time-Out.
Maybe I should be looking at:
SESSION-TIMEOUT due to kernel:
Kernel parameter: rdisp/gui_auto_logout
Kernel parameter: rdisp/plugin_auto_logout
as per the SAP OSS Note: 705013
But again, I think this Note is pointing to the SICF service and IAC type of iView and not SAP Transaction type iView. Please advice.
Thanks,
Gaurav
Edited by: Gaurav Shah on Dec 4, 2008 9:37 PM
Edited by: Gaurav Shah on Dec 4, 2008 9:42 PM -
Creating a Perl script for SAP sytem profile parameter
Hi,
I need to create a perl script for all th eprofile parameter to check as a security directive ,so that whenever the system is started it checks for this profile parameter.
As per my company sap directive ,these are the profile parameter i need to set.
Can anyone let me know how to write the scripts.
login/min_password_lng Minimum password length for user password 320 Min.
8
login/password_expiration_t
ime
Number of days between forced password change. 0 Max.
35
login/fails_to_session_end Number of invalid logon attempts allowed before the
SAP GUI is disconnected.
3 Max.
3
login/fails_to_user_lock Number of invalid logon attempts before the user id is
automatically locked by the system.
12 Max.
6
rdisp/gui_auto_logout Time, in seconds, that SAPGUI is automatically disconnected
because of in-activity.
0 60-
7200
21
auth/test_mode Jump into report RSUSR400 at every authority check N N22
auth/system_access_check_
off
Switch off automatic authority check for special ABAP
commands
0 0
auth/no_check_in_some_ca
ses
Special authorization checks turned off by customer.
Enabling of Profile Generator
N/Y23 Y
login/ext_security Security access controlled by external software. N N24
auth/rfc_authority_check Permission for remote function calls from within ABAP
programs
0 1
login/failed_user_auto_unlo
ck
Enable system function for automatic unlock of users
at midnight. (0 = locks remain)
0 0
login/
no_automatic_user_sapstar
(as of 3.1h)
login/no_automatic_user_sa
p* (prior to 3.1h)
Disable ability to logon as SAP* with PASS as password
when SAP* deleted.
0 125,26
auth/tcodes_not_checked TCode checking for SU53 & SU56 analysis disabled (empty
"SU5
3
Regards,
Chetan.Here's a simple perl script that should help you get what it is you're looking for - you can add all the parameters you want to search for, I just took a few of them:
#!/usr/bin/perl -w
use strict;
use sapnwrfc;
SAPNW::Rfc->load_config;
my $rfc = SAPNW::Rfc->rfc_connect;
my @parms = ( "login/min_password_lng",
"login/password_expiration_time",
"login/fails_to_session_end",
"login/fails_to_user_lock" );
for my $x (0 .. $#parms) {
my $rcc = $rfc->function_lookup("SXPG_PROFILE_PARAMETER_GET");
my $slr = $rcc->create_function_call;
$slr->PARAMETER_NAME($parms[$x]);
$slr->invoke;
print "Value for $parms[$x] is: ".$slr->PARAMETER_VALUE."\n";
$rfc->disconnect();
And running it, you'll get:
[dhull@397 scripts]$ ./read-profile.pl
Value for login/min_password_lng is: 7
Value for login/password_expiration_time is: 90
Value for login/fails_to_session_end is: 3
Value for login/fails_to_user_lock is: 6
[dhull@397 scripts]$
If you need to get your perl environment read to make RFC calls to your SAP system, check my series of blogs on how to do so here:
https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/u/251752730
Cheers,
David. -
Is there a way to set the SAP gui inactivity timeout for a specific user or group of users?
Hi Chris,
Note <a href="http://service.sap.com/sap/support/notes/27320">27320</a> has descriptions about rdisp/keepalive and rdisp/gui_auto_logout, are you looking for something else in this case?
Regards, Mark -
Because our users number is very larger, the loading of primary machine(Instance: PRD) is very hight. So we install a DIA machine(Instance D01). and set rdisp/gui_auto_logout value to 1800 in the profile for each instance. Restart the machines, atfer logon to system from D01 and PRD 30 minutes, D01 gui can auto logout, but PRD gui can not logout . Our local conslutant reguest me add rdisp/gui_auto_logout parameter in the default profile and remove the parameter from PRD and D01 instance profiles. I do it follow the sugguestion, and restart the services, but the result is same: D01 gui can auto logout, PRD gui can not auto logout after logon 30 minutes. Why , what error I do? please help.
Thanks for your helpAnd also check the below mention parameter values also if this parameter values are grater then your value then you setting is not valid. and also check the profile has been activated.
rdisp/keepalive
rdisp/keepalive_timeout
rdisp/keepalive_old -
Hw to auto log-out from SAP screen ????
Do any one has this answer ?
Pls send me on my mail id [email protected]...
i would be very thankful to you......Dear Vish,
Put this profile parameter 'rdisp/gui_auto_logout'
That should logout/end the user session if they are idle.
Do let me know in case of any queries.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh -
Portal Session Timeout - ICM/Webdynpro/POWL
Hi Experts,
We are having SRM Portal which has POWL Webdynpro and other applications running.
SRM Portal is a seperate JAVA Instance and integrated to backend with SSO enabled.
We have Logon Ticket Timeout set as default 8 Hours and the Session Timeout in Portal set as 2 Hours (Server>services>webcontainer>properties>Session Timeout).
For the ABAP backend, we have rdisp/plugin_auto_logout-->7200 (2 Hours) and ICM timeout as remommeded by SAP as icm/server_port_0 = PROT=HTTP,PORT=8012,TIMEOUT=90,PROCTIMEOUT=600
Now the problem is:
1. Users connected to portal and work on any POWL Iviews has an idle time of two hours-->we get the ICM session timeout error page.
2. Sometimes Users get the Login screen of portal within the Navigation Frame which can be identified as the Ticket Expiration
Is there a possibility to control the behavior of portal to avoid these error pages to Users like if the timeout happened in backend, there should be auto refresh if the user clicks the application.
And if the ticket expired, the portal should refresh to the home screen on clicking any Iview.
We tried the IDLE timeout pop up and in Vain, you could see my another post on the same.
Portal Idle Pop Up
Regards,
SethuHi,
Read SAP note 705013,
I think adjusting the kernel parameters, rdisp/gui_auto_logout and rdisp/plugin_auto_logout will help.
Try adding below parameters in the Instance profile.
icm/keep_alive_timeout 3600
icm/conn_timeout 5000
Regards,
Venkata S Pagolu -
HI Experts,
The client has upgraded to ECC 6.0 from 4.6c, everything works fine but the only problem is that the users complain that the server is slow. The client has done a memory upgrade from 8Gb to 16 Gb but the problem still pertains. The server is Up and running and there is no problem at all.
The ECC runs on this WIN NT server and the DB2 database is connected to it through the IBM server. They use DB2connect
They dont have any application servers.
After the upgrade their system performance declined,
Users are complaining that the response time of the system is very slow. Also while executing some transaction codes like GD13, the system just throws the user out after a while.
they have to execute the transaction in steps.The ST02 shows a lot of swaps in the program buffer and the EXport/ IMport buffer. Also in ST02,SAP memory section
we can see that the Max Use is 2 times that of the In Memory for the Page Area.
In ST03N, the DB time for the background work process type is much greater than the processing time.
Please let me know if i have missed out any details.
I am attaching the parameters here below for further information. Please let me know what are the parameters that have to be modified for solving this error. I am not a pro in performance tuning and that is the reason seeking help from the GURU's
Thank you in advance and please let me know if more details are required
SACHIN
03/06/2008 Active parameters 08:25:57
Parameter Name
Parameter value
|SAPDBHOST sapgbeth
|j2ee/dbtype db2
|j2ee/dbname DB2P
|j2ee/dbhost SAPPRD
|SAPSYSTEMNAME PRD
|SAPGLOBALHOST sapap4
|rdisp/bufrefmode sendoff,exeauto
|rdisp/mshost sapap4
|rdisp/msserv sapmsPRD
|rdisp/msserv_internal 3900
|j2ee/scs/host sapap4
|j2ee/scs/system 31
|j2ee/ms/port 3931
|SAPTRANSHOST sapap2
|login/system_client 300
Instance parameters
Active parameters 08:33:11
Parameter Name
Parameter value
|icm/server_port_1 |PROT=SMTP,PORT=25
|zcsa/table_buffer_area |120000000
|rsau/selection_slots |5
|rsau/enable |1
|zcsa/presentation_buffer_area |44000000
|rdisp/gui_auto_logout |7200
|rdisp/noptime |14400
|rdisp/wp_auto_restart |14400
|rsdb/ntab/entrycount |70000
|rsdb/esm/buffersize_kb |4096
|rsdb/esm/max_objects |2000
|rsdb/ntab/ftabsize |62500
|rsdb/ntab/irbdsize |30000
|rsdb/ntab/sntabsize |2500
|rsdb/obj/buffersize |32000
|rsdb/obj/max_objects |20000
|rsdb/otr/buffersize_kb |4096
|rtbb/buffer_length |30000
|rtbb/max_tables |500
|sap/bufdir_entries |4500
|zcsa/db_max_buftab |25000
|abap/buffersize |850000
|SAPSYSTEMNAME |PRD
|SAPGLOBALHOST |sapap4
|SAPSYSTEM |00
|INSTANCE_NAME |DVEBMGS00
|DIR_CT_RUN |$(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
|rsdb/cua/buffersize |12500
|DIR_EXECUTABLE |$(DIR_INSTANCE)\exe
|jstartup/trimming_properties |off
|jstartup/protocol |on
|jstartup/vm/home |C:\j2sdk1.4.2_14-x64\
|login/fails_to_user_lock |4
|login/password_expiration_time |30
|jstartup/max_caches |500
|jstartup/release |700
|jstartup/instance_properties |$(jstartup/j2ee_properties);$(jstartup/sdm_properties)
|j2ee/dbdriver |C:/Program Files/IBM/SQLLIB/\java\/db2jcc.jar;C:/Program Files/IBM/SQLLIB/\java\/db2jcc_license_cisuz.jar
|rdisp/wp_no_dia |12
|rdisp/wp_no_btc |8
|rdisp/j2ee_start_control |1
|rdisp/j2ee_start |1
|rdisp/j2ee_libpath |$(DIR_EXECUTABLE)
|exe/j2ee |$(DIR_EXECUTABLE)\jcontrol$(FT_EXE)
|rdisp/j2ee_timeout |600
|rdisp/frfc_fallback |on
|icm/HTTP/j2ee_0 |PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
|icm/server_port_0 |PROT=HTTP,PORT=80$$
|ms/server_port_0 |PROT=HTTP,PORT=81$$
|rdisp/wp_no_enq |1
|rdisp/wp_no_vb |8
|rdisp/wp_no_vb2 |1
|login/min_password_lng |4
|rdisp/wp_no_spo |2
|dbms/type |db2
|dbs/db2/schema |SAPR3
|dbs/db2/use_drda |1
|dbs/db2/ssid |DB2P
|dbs/db2/hosttcp |sapprd
dbs/db2/user
PRDADM
|rsdb/max_blocking_factor |10
|rsdb/max_in_blocking_factor |10
|rsdb/min_blocking_factor |3
|rsdb/min_in_blocking_factor |3
|rsdb/prefer_fix_blocking |0
|rsdb/prefer_union_all |1
|rsdb/prefer_in_itab_opt |1
|j2ee/instance_id |ID0058933
Active parameters 08:34:47
Parameter Name
Parameter value
SAPSYSTEMNAME
PRD
|SAPGLOBALHOST |sapap4
|SAPSYSTEM |00
|INSTANCE_NAME |DVEBMGS00
|DIR_CT_RUN |$(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
|DIR_EXECUTABLE |$(DIR_INSTANCE)\exe
|DIR_PROFILE |$(DIR_INSTALL)\profile
|_PF |$(DIR_PROFILE)\PRD_DVEBMGS00_sapap4
|Start_Program_00 |immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF)
|_MS |$(DIR_EXECUTABLE)\msg_server$(FT_EXE)
|Start_Program_01 |local $(_MS) pf=$(_PF)
|_DW |$(DIR_EXECUTABLE)\disp+work$(FT_EXE)
|Start_Program_02 |local $(_DW) pf=$(_PF)
|_IG |$(DIR_EXECUTABLE)\igswd$(FT_EXE)
|Start_Program_03 |local $(_IG) -mode=profile pf=$(_PF)
|dbms/type |db2
|dbs/db2/schema |SAPR3
|dbs/db2/use_drda |1
|dbs/db2/ssid |DB2P
|dbs/db2/hosttcp |sapprd
|dbs/db2/user |PRDADM
|rsdb/max_blocking_factor |10
|rsdb/max_in_blocking_factor |10
|rsdb/min_blocking_factor |3
|rsdb/min_in_blocking_factor |3
|rsdb/prefer_fix_blocking |0
|rsdb/prefer_union_all |1
|rsdb/prefer_in_itab_opt |1
ST02 details
System: sapap4_PRD_00 Tune summary
Date + Time of Snapshot: 03/06/2008 09:12:54 Startup: 02/28/2008 17:00:25
Buffer
HitRatio %
Alloc. KB
Freesp. KB
% Free Sp.
Dir. Size
FreeDirEnt
% Free Dir
Swaps
DB Accs
Nametab (NTAB)
0
Table definition
99.81
17,230
8,898
66.41
70,000
46,486
66.41
0
35,319
Field definition
99.82
67,969
1,093
1.75
70,000
50,465
72.09
3,122
23,024
Short NTAB
99.81
4,688
1,494
59.76
17,500
14,009
80.05
0
3,491
Initial records
77.19
32,188
25,367
84.56
17,500
204
1.17
0
17,333
0
program
99.86
850,000
2,503
0.31
212,500
187,621
88.29
16,688
133,368
CUA
99.89
12,500
1,687
15.43
6,250
4,841
77.46
0
1,440
Screen
99.92
42,969
4,178
9.78
4,500
2,539
56.42
0
2,025
Calendar
100.00
488
407
85.32
200
111
55.50
0
89
OTR
100.00
4,096
3,594
100.00
2,000
2,000
100.00
0
0
Tables
0
Generic Key
99.96
117,188
10,484
9.40
25,000
963
3.85
19
91,258
Single record
99.43
30,000
19,703
66.00
500
307
61.40
0
100,286
0
Export/import
87.05
32,000
345
1.28
20,000
7,881
39.41
20,674
Exp./ Imp. SHM
96.21
4,096
3,487
97.02
2,000
1,999
99.95
0
SAP Memory
Curr.Use %
CurUse[KB]
MaxUse[KB]
In Mem[KB]
OnDisk[KB]
SAPCurCach
HitRatio %
Roll area
6.99
18,328
24,152
262,144
0
IDs
88.76
Page area
11.15
29,222
262,136
131,072
131,072
Statement
86.00
Extended memory
13.28
2,228,224
4,182,016
16,773,120
0
0.00
Heap memory
0
0
1,953,199
0
0.00
Call Stati
HitRatio %
ABAP/4 Req
ABAP Fails
DBTotCalls
AvTime[ms]
DBRowsAff.
Select single
99.59
43,894,293
12,780,161
318,640
0
31,114,132
Select
91.37
83,904,537
0
1,381,069
0
10,468,946
Insert
0.00
27,752
11,469
28,873
0
48,575
Update
0.00
102,654
5,118
104,414
0
97,141
Delete
0.00
50,367
44,486
52,487
0
45,787
Total
95.48
127,979,603
12,841,234
1,885,483
0
41,774,581Hi,
How is the database server operating system coping in terms of CPU load and memory? and what is the db data cache hit ratio in ST04?
I would look into the following things, network configuration between database and central instance, and the load on the DB server cpu load/memory and possibly the most important the DB2 memory and configuration instead of focusing on the SAP application server in case of high DB times.
Please be aware of the fact that tables in upgrade from 4.6C to ECC increase from about 30000 to 60-70000 and db tuning is the most likely explanation for your problems.
Regards
Sindri -
RFC error when sending logon data
Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.* Start profile START_DVEBMGS00_erptest *
#.* Version = 000006 *
#.* Generated by user = BASIS *
#.* Generated on = 30.12.2010 , 15:40:55 *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created by: BASIS 24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created by: BASIS 24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created by: BASIS 24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created by: BASIS 24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created by: BASIS 24.12.2007 23:53:27
MS = msgserver.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created by: BASIS 24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created by: BASIS 24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created by: BASIS 25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created by: BASIS 25.03.2004 08:37:47
#old_value: 3 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created by: BASIS 16.06.2007 17:35:41
#old_value: 2
#changed: BASIS 14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created by: BASIS 10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value: changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000 changed: BASIS 20.04.2005 17:17:01
#old_value: 0 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000 changed: BASIS 28.03.2005 23:17:11
#old_value: 2 changed: BASIS 29.03.2005 12:09:14
#old_value: 0 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created by: SAP* 08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created by: ALPER 13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created by: BASIS 27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created by: BASIS 30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created by: BASIS 30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created by: BASIS 30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created by: BASIS 03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created by: BASIS 24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created by: BASIS 18.05.2005 09:20:25
#old_value: 90 changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created by: BASIS 20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS 03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created by: BASIS 20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS 03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created by: BASIS 08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS 30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS 03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created by: BASIS 08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created by: BASIS 08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created by: BASIS 08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created by: BASIS 08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS 03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created by: BASIS 08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created by: BASIS 08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created by: BASIS 08.07.2003 20:34:46
#old_value: 5000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created by: BASIS 08.07.2003 20:33:56
#note 103747
#old_value: 10607 changed: BASIS 08.07.2003 20:34:58
#old_value: 10000 changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created by: BASIS 08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076 changed: BASIS 28.06.2005 19:36:21
#old_value: 5735 changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
*** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan
Maybe you are looking for
-
Download of osx mountain lion not started
i bought mac osx mountain lion online at app store but it have not started downloading the machine in which i am downloading has already mountain lion installed plz give some solution t&R Sachin
-
Clamshell mode won't work? (MacBook + LG Monitor)
Howdy! I've triple-checked the official doc on how to use Clamshell Mode, but I can't seem to get it to work. My MacBook is plugged in and fully charged, the display (LG W2052TG) is connected, as are my USB keyboard and mouse. Yet when I close the di
-
Unnecessary question "Do you want to save the changes..."
Hello again, I have a multi-record block on which only update is allowed and two buttons: accept and reject. There are three possible ways of changing records: 1. change values in some fields and commit - which works fine; 2. change values in some fi
-
WLC and AP on different subnets
I would like to add a new AP to my existing controller. Currently i have about 15 AP's connected to a seperate mgt vlan for the AP's, vlan 10. It is trunked to the controller as well as the other user vlans like Private, Public, WVoIP etc. I have alr
-
How do I burn a slide show to a DVD?
When I burn a slide show I created on Photoshop Elements 11 to a DVD using Premier Elements 11, only the botton half of the photos are copied. How do I correct this?