/SAP/report.do not working with BI 4.0, how to maintain LPD_CUST launchpad?

Hi,
As confirmed in this thread Re: Configure Publishing to BO BI 4.0,
the way to start Crystal Reports on 4.0 is via the /BOE/OpenDocument path, not via /SAP/reportView.do anymore.
This is fine as long as we are using e.g. the new iViews in the Portal, or any ways which allow us to specify the whole URL and path.
Unfortunately we are using the WebDynpro ABAP launchpad (customizing with LPD_CUST), without the Portal - just using NWBC on ECC. When configuring a link to a Crystal Report, it distinguished between Crystal Reports deployed on BOE vs. Crystal reports deployed on BW. But it uses the old 3.1 path of /SAP/reportView.do
Is there any way to deploy a SAP webapplication on BI 4.0 to make it backwards compatible, or is there a correction planned in the near future for the WebDynpro ABAP launchpad to distinguish between 4.0 and 3.1 links?
Thanks,
Florian

Hi Florian,
Have you gone through this process, me too travelling in the same scenario.
Successfully published the reports in BOE server, but no clue how to view the BOE report in NWBC.
Any assistance would be really helpful.
--SumanT

Similar Messages

  • HT201541 Final cut Pro 10.0.8 was installed on my computer when I got it. It now will not work with  OS Yosemite. How do I get update for final cut?

    Final cut Pro 10.0.8 was installed on my computer when I got it.
    It now will not work with  OS Yosemite. How do I update Final cut so I can use it?
    I am new to Mac Book Pro so I need help!!!

    You get FCPX legally only via AppStore; it then gets 'bonded' to your AppleID/Appstore account.
    To update, log in with the Account you have purchased it - click update (for free)
    If you don't have the Account data, you're not owner of the software. No free drinks updates.
    Log in with YOUR ID, click purchase  - ring! 300$ .............

  • Firefox 5 does not work with Google Toolbar. How do I go back to the previous Firefox version that I had?

    Firefox 5 does not work with Google Toolbar. How do I go back to the previous Firefox version that I had? Or how can I get my Google Toolbar back?

    Google Toolbar [https://support.mozilla.com/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox Add-ons are disabled after updating Firefox]
    * GBookmarks (Google Bookmarks for Firefox) 25.6KB<br>https://addons.mozilla.org/firefox/addon/gbookmarks-google-bookmarks-fo/
    * http://kb.mozillazine.org/Problematic_extensions
    *for a Google Toolbar solution see https://support.mozilla.com/questions/837473

  • My iPod Touch is not working with Bose SoundDock.  How can I fix it?

    My iPod Touch is not working with Bose DoundDock Series II.  Can anyone suggest how I can get these 2 to work together?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      
    Apple will exchange your iPod for a refurbished one with a new battery for $79 Y can do the exchange at an APple store or sent it in.. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace your battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. Y can purchase a eplacement battery for about $10
    iPod Touch Repair – iFixit                  

  • Sblive not working with Cool n'Quiet, how about Audigy

    My SBli've will not work with Cool n'Quiet enabled. I tried moving it from slot to slot, I fumbled with the Bios (and every change made matters worse), memory is ok (at least according to memtest and prime95), kx drivers won't help either (but sound a lot nicer).
    Well, what gives, the card is a little over seven years old and has earned a retirement.
    I'm thinking about replacing it with an Audigy 4 (not pro) und would be very happy if someone could write about her or his experience with the card, esp. with Cool n'Quiet enabled.
    Btw. what kind of card is it anyway? Does it use a 0k2-Chip?
    thanks
    My System:
    AMD X2 3800
    Asus A8V (Via KT800pro, AGP)
    Nvidia 6600GT (AGP)
    024 Mbyte RAM (conservati've timing)

    I cant promize anything, but it should work. X-FI and Audigy 2 work just fine with C&Q enabled. So Audigy 4 should work fine too.

  • Business Objects 3.1 reports are not working with IE 10.

    Hi,
    Recently I upgraded my internet explorer to IE10.. Since then business objects 3.1 reports are not opening in IE10.0
    Getting error message "webpage can't be found".
    I am not sure whether BO 3.1 reports work with IE 10.0 or not.
    Please advise
    Thanks
    Sat

    Did you try with other browsers ?
    IE 10 (Compatibility View display mode) with Oracle Java 6 / Oracle Java 7 is supported for BOXI3.1 SP6.
    Please check the PAM for details of your SP level.

  • CRVS2010 Beta - Crystal Report does not work with VS 2010

    After having installed vs 2010, as mentioned, I dowloaded crsytal report . But when trying to create a new crystal report object, I have a html page displayed but crystal report does not start. I would like to know how to make crystal report start to create new report ?
    Thanks
    Patrick
    Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
    Thread moved to NET Development - Crystal Reports
    Edited by: Ludek Uher on Aug 27, 2010 6:48 AM

    My OS is windows XP. Visual studio 2010 Professional version 10.0.30319.1.rtm rel. Visual basic is 01018-532-2002102-70383. dot net framework is 4.0.30319 rtm rel. When I add a new crystal report object to my project a file named CrystalReport1.mht. Its content is :
    From: <Saved by Windows Internet Explorer 8>
    Subject: Crystal Reports for Visual Studio 2010
    Date: Fri, 2 Oct 2009 17:24:34 -0700
    MIME-Version: 1.0
    Content-Type: multipart/related;
         type="text/html";
         boundary="----=_NextPart_000_0000_01CA4385.35B07AB0"
    X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.5579
    This is a multi-part message in MIME format.
    =_NextPart_000_0000_01CA4385.35B07AB0
    Content-Type: text/html;
         charset="utf-8"
    Content-Transfer-Encoding: quoted-printable
    Content-Location: file://C:\_Working\Projects\Cortez\Stub Templates\RTM\EN\CR for VS 2010 HTML\CRforVS2010.html
    =EF=BB=BF<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
    then followed by characters whch are not readable.
    Thank you for your help
    Patrick

  • I uninstalled firefox due to incompatabilty issues with my work program. I need to reinstall 5.0 or earlier as our program will not work with 6.0. How do I find an earlier version 4 or 5. Thank you.

    Slow running program, uninstalled Firefox, I believe 3.1. My work program will only work with 4 or 5 for now. Where can I find an earlier version to download?

    In some cases, the incompatibility is due to the new HTML5 parser in Firefox 4. You could disable that and test whether the bank site works again.
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''html5''' and pause while the list is filtered
    (3) Double-click '''html5.parser.enable''' to toggle it to false (it should turn bold).
    Then reload the bank page and see whether it works.
    And if you need it, here's the process to roll back:
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, download and save Firefox 3.6 to your desktop for future installation. http://www.mozilla.com/firefox/all-older
    Close Firefox 4.
    You could install Firefox 3.6 over it (many have reported success) or you could uninstall Firefox first. If you uninstall, do not remove your personal data and settings, just the program.
    Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left off. If there are serious issues, please post back with details.
    Note: I haven't actually tried this myself!

  • None of my other toolbars (yahoo, google, norton and stumbleupon) do not work with version 5. How can I uninstall 5 and reinstall 4?

    Along with the above information, when I sign on to the internet with version 5 I get this error:
    Warning: Unresponsive script
    A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete.
    Script: chrome://stumbleupon/content/datastore.js:1243
    I am also redirected to:
    http://barisderin.com/?p=516 and
    http://www.mozilla.com/en-US/firefox/5.0/whatsnew/
    I am using Windows 7 Home as my OS
    When I try to reinstall any of my toolbars I am told it is not compatible with Firefox 5. I really hate to go back to IE but I may have to if I can't get this fixed.

    stumbleupon is compatible as the version you have may just be old.
    https://addons.mozilla.org/en-US/firefox/addon/stumbleupon/
    Norton has actually tried to get a update patch out for Firefox 5.0 back on Tuesday (versus taking some six weeks) when Firefox 5.0 was released. However I think some say the toolbar may not work if patch was installed before Firefox 5.0 and not after.
    http://community.norton.com/t5/Norton-Internet-Security-Norton/Update-Available-Firefox-5-0-Compatibility-Release-for-Norton/td-p/478160
    http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-for-Firefox-5/m-p/488664#M163730
    Long thread if you want to discuss about any problems with toolbar.
    As for Google toolbar well Google still has not cared to get a new release out yet when they were aware for weeks.

  • I do not want to upgrade to 7.0, I am attending online college and the upgraded version does not work with my school. How can I stop Firefox from upgrading? I have to keep uninstalling the upgrade and installing the old one.

    How can I stop Firefox from automatically upgrading? My on-line college is not compatible with the upgraded version. I have to keep uninstalling the new one and reinstalling the old one.

    It's not a good idea to allow websites to redirect to another site until you know for sure the original site is trustworthy.
    But if you still want to do it (again not a good idea).
    Tools>Options>Advanced>General - In Accessibility, uncheck "warn me when web sites try to redirect..." option.

  • I would like to go back to the version of Firefox before I added the new Firefox 4...most of the addons I like do not work with 4...how do I go back?

    The addons I use a lot are not compatible with Firefox 4...if I had known, I would have kept the older version....having a real hard time getting the old one back....The mozilla folder in my Programs has version 1.9 listed which is crazy...I had at least version 3.5 This is getting pretty frustrating...wish I had never switched...any help would be appreciated.....

    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • Service request interactive report is not working with IC Roles

    Dear Experts,
    We are using CRM 7.0 EHP1, we have created some custom reports based on std service request query, we can able to see these reports in IC_AGENT role as well as ZIC_AGENT role but when we click on these reports nothing is happening. But this is giving desired result in salespro role and other Zroles.
    Request your inputs/suggestions.
    Thanks in Advance.
    Regards,
    Kumar.

    Dear Experts,
    Any update on this will be greatly appreciated.
    Thanks,
    Kumar

  • Localhost not working with firefox 7. How do I get it to work with wampserver

    used to be able to access localhost via wampserver but firefox 7 just shows a blank page??? I looked at control panel->internet properties but local host is set as exception. Running XP Pro OS.
    Chrome 14 works fine with localhost but not firefox 7. I have tried the suggestions I found about:config change a few settings but nothing worked (fixup filter, browser filter). Firefox is showing correct url - not adding a www prefix - but still getting blank page???

    drum160 wrote:
    I have done the edits with /usr/sbin/lpadmin -o command and they show up in the Printers.conf file. I made sure cupsd was not running at the time. However the macbook keeps right on sending out print jobs.
    Your statements don't seem to go together.  To the best of my knowledge `lpadmin` will not run as a command unless cupsd is running.  You can either use `lpadmin` or stop cupsd and then manually edit the Printers.conf file.  I would recommend using `lpadmin`.
    I am not sure what you put in for "command".  I presume you specified the page limit.  Did you also specify the job quota period?
    I had no problem settin a page quoto as a test.  I set a page quoto of two pages each hour.  My command was:
    lpadmin -p EPSON_Workforce_1100 -o job-quota-period=3600 -o job-page-limit=2
    I then restarted cupsd to make in case the lpadmin command did not cause it to restart:
    sudo launchctl unload /System/Library/LaunchDaemons/org.cups.cupsd.plist
    sudo launchctl load /System/Library/LaunchDaemons/org.cups.cupsd.plist
    I was able to print two pages.  The third page gave me an error while printing message.
    Message was edited by: Matt Broughton

  • Adobe flash not working with surface RT. How do i get this working

    i have windows 8 on my surface rt and my adobe flash seems not to be working. i have added to my compability sites and have the most to date version. what can i do to have this working?

    AFAIK there is no Flash for Win RT.
    Mylenium

  • HT3258 The scanner on my Canon inkjet printer MG6200 series will not work with Mountain Lion. How can I fix this?

    The MP Navigator software in my scanner cannot be opened since I installed Mountain Lion. Canon say they don't have a way of fixing this, so is there a solution out there I wonder?

    I have the MG6250 and MP Navigator v5.0.2 is working on my 10.8.2 Mac, so I don't know why the Canon support is telling you that it cannot be fixed.
    To use MP Navigator you must have the full scanner driver installed. And when it is installed you then need to configure MP Navigator to use the networked MG62xx.
    Also ensure you are using the latest version of MP Navigator. Try trashing the one you currently have in Applications > Canon Utilities and then installing this latest version.

Maybe you are looking for