SAP retractors for CCA

Hi guys,
i am a BI guy and im dont have knowledge on ABAP programing and i have work on these function modules to retract data from BPS to ECC.
In BPS the using the BPS function we are using these two function modules
UPR_COST_PLAN_EXEC
UPR_COST_PLAN_INIT.
I need to know what it does and how ti works. accordingly i need to do some customizations.
Can anyone help me out.
1) How this FM works and how the data goes to R3 which program is used to send and update the tables in ECC.
2) What is the use of INIT function module
3) What are the programs involved to see where and how the data flow
Please help me anyone on this ..any help will be appriciated.
Thanks in advance
REgards
AK

Hi,
Check out below link,
http://help.sap.com/saphelp_sem320bw/helpdata/en/99/97157967e3440a94d199538959cd0b/content.htm
hope this helps.
Regards,
Viren

Similar Messages

Any idea on How to work SAP retractors for CCA,PS, PCA

Hi guys...
I need to work on the SAP retractors .. Do any one have documentation or methods?.
Thanks in advance
regards
AK

Hi Diogo,
Thanks for the answers. I am bit confident to work on. Will try to find more from forums also..
If anything will post again with my findings and issues.
Thanks again...
Regards
AK

Are there any standard retractors for BI 7.0 (from SAP BI to R3)?

hello
are there any standard retractors for BI 7.0 (data transfer from SAP BI to R3)?

You should have some standard retractors for APD and CRM... not sure where you can find them though - should be under business content I guess..

Standard SAP report for variance analysis of SD and MM

Dear All,
I want the standard SAP report for the vendors and customer varaiance analysis for the posting done in MM and SD with the GL balance in FI .It should be same as the report we get from the transaction code MB5L.
Thanks in advance
Meruta

HI,
The 1AB library contains reports for variance analyses. This is an important report for Cost Center Accounting (CO-OM-CCA) supplied in the SAP R/3 System. Additional information for report can be found in the documentation for the reports. Choose Extras->Documentation from the report itself.
Hope I had been able to help you out. Please assign points.
Rgds
Manish

Retractor for CO Orders

Hi experts,
do you know any standar retractor for CO Orders?
Thanks,
Enrique

NO. you have for CCA.
You can instead try to send the data back to R/3 thru info spoke.
Ravi Thothadri

Issue in SAP CPS for Job Interception

Issue in SAP CPS for Job Interception
Scenario:
After triggering a Process Chain in BW and maintaining the Job Interception settings in SAPCPS(Redwood)
(so that any job which triggers in BW by that Particular User is intercepted and not let it proceed further until the job is released in SAP CPS.)
Issue:
The Jobs are getting into Waiting status in SAP CPS(Redwood) even though there is no progress in loads in BW side. Also the Jobs are in Intercepted state even after releasing the Parent Job in SAP CPS(Redwood).
Please let us know how to go about it.

Hi Ramesh,
What you plan to do is called monitoring of process chains (ie. process chains not started from CPS) and this should be available in the latest version of CPS.
This requires the interception of only the BI_PROCESS_TRIGGER process, just as you have configured now, and other than that the following prerequisites:
SAP Note 1080558 describes the SP levels for the BW/BI releases
XBP 2.0 or higher
Redwood transport files must be loaded
ProcessServerService.SAP.XBPVariant license key
Maybe this helps,
Anton.

Unable to Print Purchase order automatically using SAP GUI for JAVA

Hi SAP gurus,
Some of the PC's in our company use windows and some LINUX. Therefore we use two types of SAP GUI. One for windows and the other one JAVA. PO approval was set to print automatically. In a windows setting, there are no problems with this setup. But in SAP GUI for JAVA, no print outs are produced and no error messages are displayed. I am using SAP GUI for JAVA version 7.10 ver 6. and I use Front end printing for linux access method G.
please help,
gungertz

hi gungertz,
You can use U type access method for printing SAP document using linux desktop.
Please refer to my blog posting here (http://sapbasis.wordpress.com/2007/08/23/print-sap-documents-using-linux/)
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com

Sap notes for 103 movement type and 105 movement types in sap

Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.

There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit

SAP Tables for Open Customer Orders and Sales History

Dear Experts.
I am looking to get SAP SD related tables for the following,
1) SAP tables for Open Customer Orders
From SAP, I need to get all tables that Contain all open customer orders for products.
2) Sales History
From SAP, I need to get all tables that contain the previous month's sales history (shipped customer orders).
Please Help!!

hi
check the following link
http://www.erpgenie.com/abap/tables_sd.htm
hope it will help you
regards,
sreelatha gullapalli

Shift+F2 not working in SAP GUI for ITS

Hi,
In my transactional iview (SAP GUI for ITS) , in one of the screens, shift+F2 is not working(Which in turn opens graph for the report) The same is working fine in SAP GUI for html.
How can i make this work?
Also, can i have a document with the comparision of SAP GUI for html & SAP GUI for ITS, specifying its advantages and dis-advantages as well?..
Pls treat this query as urgent and respond ASAP.
Thanks in advance,
Kavitha

ITS THE PROBLEM IN DEV NOT IN PROD ECC SYS

What is the new sap note for Ptax slabs of FY 2011-12.

Dear Experts,
we are currently using ECC 6.0, release 604, patch level 0035 and support package SAPKE60435. professional tax slabs not updated in table V_T7INP4.
what is the new sap note for Ptax slabs of FY 2011-12.

Hi,
The Profession Tax tables T7INP3 & T7INP4 are customizing tables in which the entries are to be modified. SAP provides the initial entries and, if there is any change in slab rates, then you would need to update these slabs manually.
Please delimit the slab code in table T7INP3 and then create a new slab code entry from the date of delimition for the new rates in table T7INP4.
Regards,
Nishtha

Error during DatabaseCopy using SAP tools for SQL Server (v7.12)

I'm trying to perform a system copy from PRD to QAS. The database has been mounted to QAS via detach and attach method. I did a DBCC on the database and everything looks OK. I'm running SAPINST (SAP Tools for MSSQL) and selecting the Database Copy option. The source database has a schema of DBO. Both PRD and QAS are running SAP 4.7/Basis 620. The target schema is QAS. SAPINST fails in step 2 (Define Params) with:
"This service cannot be used for a system with SAP ABAP release 620"
Is this message misleading? Has anyone receive this message before.
UPDATE:
I donwloaded the latest version of SAP Tools for MSSQL and now it failes during the execution phase on step, "Convert DB objects to new schema".
Here is the log:
Process environment
===================
Environment Variables
=====================
=::=::\
=C:=C:\Program Files\sapinst_instdir\MSS\CPY
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\r3tadm.STAG\Application Data
CLIENTNAME=TRAIMONOTEBOOK
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=STAG
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=MSS
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\r3tadm.STAG
LOGONSERVER=
STAG
MSSQL_DBNAME=R3T
MSSQL_SERVER=stag
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Dell\SysMgt\RAC5;C:\Program Files\Dell\SysMgt\oma\bin;C:\Program Files\Dell\SysMgt\oma\oldiags\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\usr\sap\R3T\SYS\exe\run
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f06
ProgramFiles=C:\Program Files
SAPINST_EXEDIR_CD=C:/STM/I386
SAPINST_JRE_HOME=C:/WINDOWS/TEMP/3/sapinst_exe.3012.1234409473/jre
SAPLOCALHOST=stag
SESSIONNAME=RDP-Tcp#25
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\3
TMP=C:\WINDOWS\TEMP\3
USERDOMAIN=STAG
USERNAME=r3tadm
USERPROFILE=C:\Documents and Settings\r3tadm.STAG
windir=C:\WINDOWS
User: STAG\r3tadm, Id: S-1-5-21-2727398557-1322528747-1943968026-1019
Working directory: C:/Program Files/sapinst_instdir/MSS/CPY
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
Groups:
Group count: 14
\LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
\Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1021 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1023 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\None S-1-5-21-2727398557-1322528747-1943968026-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\NTLM Authentication S-1-5-64-10 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
\ S-1-5-5-0-36828865 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_GlobalAdmin S-1-5-21-2727398557-1322528747-1943968026-1018 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
ERROR 2009-02-11 19:31:46.529 [sixxcstepexecute.cpp:984]
FCO-00011 The step MoveSchema with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
TRACE 2009-02-11 19:31:46.544
Call block:CallBackInCaseOfAnErrorDuringStepExecution
 function:CallTheLogInquirer
is validator: true
WARNING 2009-02-11 19:31:46.544 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2009-02-11 19:31:46.544 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
TRACE 2009-02-11 19:31:46.544
A problem occurs during execution the inquirer callback. SAPinst will switch back to the standard behaiviour.
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:707]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing service SAP Toools for MS SQL Server > Database Copy. You may now <ul> <li> choose Retry to repeat the current step. </li> <li> choose View Log to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY. </body></html>
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:1245]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Edited by: Tony Raimo on Feb 12, 2009 4:37 AM

This is looks like permission issue on source folder
Copy source in to your local drive and try again.
I had same issue and able to resolve after copy EXP1 EXP2 and EXP3 folder in to local drive C: with Everyone full access
Yogesh

SAP Exit for Current Posting Period

H All,
   I am executing a query and it should always take the Current Fiscal Year & Current period into consideration. I don't see any Standard SAP exit which is provided for this. There is an SAP exit for Fiscal year/Period but I need both of them seperately.   Can anyone please provide a sample code for "Current posting period".
Points will be assigned!
Thanks a lot!

Hi Sia
Here is some cmod code that might help:
These should be run in i-step = 1
DATA: l_period        TYPE t009b-poper,
          l_txt4(4)      TYPE c.
*Variable ZCCCFYEAR that defauts to current Fiscal Year
        WHEN 'ZCCCFYEAR'.
          l_txt4 = syst-datum(4).
          l_period = syst-datum+4(2).
*Handles FiscVarnt, period 6 is end of year so period 7 is new year
          IF l_period > '06'.
            l_txt4 = l_txt4 + 1.
          ENDIF.
          l_s_range-low = l_txt4 .
          l_s_range-high = ''.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
*Variable ZCCPPER that defauts to current Posting Period
Code adds 6 to current year period to be inline with Fiscal Year Variant (ie.per1 = july(7)),
        WHEN 'ZCCPPER'.
          l_period = syst-datum+4(2) + 6.
          IF l_period > 12.
            l_period = l_period - 12.
          ENDIF.
          l_s_range-low = l_period.
          l_s_range-high = ''.
          l_s_range-sign = 'I'.
          l_s_range-opt = 'EQ'.
          APPEND l_s_range TO e_t_range.
Hope this helps
Josh

ANN: SAP GUI for Java 7.10 available for download

Hi all,
SAP GUI for Java 7.10 is now available at http://service.sap.com/sapgui-java.
In case you are not registered on service.sap.com, you can alternatively download it from ftp://ftp.sap.com/pub/sapgui/java/710.
New platforms:
- JSE 6: See System Requirements of platforms for details. Also, usage of JRE 1.4.2 is no longer supported.
- Microsoft Windows Vista (Business and Ultimate editions)
- Mac OS X 10.5 (once the test on the final build of "Leopard" has been successfully completed, see <a href="https://service.sap.com/sap/support/notes/959236">Note 959236</a> for latest news)
- HP-UX 11.31
New features:
- Input History: Text previously entered in an entry field is available in a dropdown listbox when the same entry field is reaccessed.
- The installer now can be launched directly from a write-protected directory and the installation process completes considerably faster.
- The Preference Dialog has been redesigned.
- Dynpro Splitter: The feature to display two subscreens divided by a horizontal or vertical splitter has been implemented.
<a href="https://service.sap.com/sap/support/notes/959236">Note 959236</a> lists the supported platforms and will include latest news on support for Mac OS X 10.5 (Leopard).
Best regards
Rolf-Martin

Hello Mac users,
ANN: SAP GUI for Java 7.10 rev 1 available for download officially supports Leopard.
Best regards
Rolf-Martin

In case of problems with SAP GUI for Java ...

Hello all,
in case of having problems (errors, ABAP dumps etc.) with SAP GUI for Java, please create an OSS message on component BC-FES-JAV with information described in OSS note 326558
http://www.service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700010521522001.
This makes sure our official support channels get aware of your problem.
Thanks and best regards
Rolf-Martin

Hello Rolf-Martin,
i don't have access to this website to view the note.
The version of the Suse libc is:
GNU C Library stable release version 2.3.2, by Roland McGrath et al.
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
Compiled on a Linux 2.4.20 system on 2003-03-13.
Best Regards,
Piotr Brostovski

SAP retractors for CCA

Similar Messages

Maybe you are looking for