SAP roles- "getResourceObjects" search options?

Hi,
I'm trying retrieve all the roles (activity groups) from a SAP resource. I use the "getResourceObjects" form util method to do this. This method retrieves all the roles on SAP system. But I need to get only the roles starting with a particular character (say "X"). I went through the java docs for "getResourceObjects". I see only "map" in the arguments. I'm not sure which options to user get the roles starting with "X" only. Any direction would be highly appreciated.
Thanks,
kIDMan.

Hi MV
Thanks for responding.
I was trying my hands at Closing Cockpit.
In CLOCOC i was able to create hierarchies. One question regarding hierarchies: Is it possible to do closing for any one of the organizational unit like PRCTR or CCode? Or is the closing applicable to all the units in the hierarchy?
Secondly: I am not clear about task list. What exactly goes in there. SAP help is not that helpful in this regard.
What are dependencies?
I understand that we need to register programs and transactions: prerequisites for CLOCOC. But I didn't understand why we need to do that. Whats the logic.
I was going to try out all the steps but I ended up getting an ABAP Run time error which is not yet resolved, therefore, I may have asked more questions than I should have.
One last thing, why do we need CLOCOS?
Thanks in advance and excuse my novice knowledge level in this area.
Regards,
Vj

Similar Messages

  • Search option from SAP Portal to sharepoint portal

    Hi Experts,
    We need to integrate windows sharepoint portal and SAP Enterprise portal.
    As part of that we are implement search option in SAP portal.
    That is with the help of TREX search.
    here when we search any thing with the help of TREX ,
    it has to go to windows sharepont and search the required
    and bring the data back to SAP Portal.
    For this purpose what are the available options and how it has to done ?
    I found that it can be done with the help of cucstom J2EE search Engine.
    I am not sure how it can be done.
    If any one has ideas or implemented already please guide me.
    My client require searching option like this,
    we need to provide drop down box in SAP Portal with 3 options like
    1) search in Share point portal
    2) search in SAP POrtal
    3) Search in both the portals
    Need suggestio0ns how it can be done.
    Thanks in advance.
    Regatds
    Bala

    Hi vijay,
    Thanks for your reply,
    But still i did n't get clear idea.
    please mail me your phone number so that i can discuss with you.
    my mail id <b>[email protected]</b>
    Let me know whether you have worked on this area?
    Thanks in advance
    Regards
    Bala

  • SEARCH option under the SAP logo

    Hi,
    With the SAP Default settings in Portal...
    There is a SEARCH option under the SAP logo
    What is this search used for...currently if i search for any thing a pop window is appearing with No index is generate.
    Thanks

    This search can be configured to search large collections of documents, structured and unstructured data from various data sources.
    Installation and configuration of TREX (Search and Classification Engine) is required for this search to work.
    Once TREX is installed and connected to your portal, you can create indexes so that documents that are indexed can be searched.
    You can find lots of information on this topic if you need to configure this.
    Thanks,
    Shanti

  • Cannot find "Employee search" option portal - EHP7

    Customer says, on previous version of portal, they had “Employee search” option in which anyone can search for basic data of any colleagues. Right now in EHP7, there is no such options. Did we miss activation at any place or missing any notes?
    Your help is appreciated.
    Thanks
    Jacob J

    its very simple..
    For Who's who :- open launchpad and create new folder and add New application in that give name as Who's who and select Application type as Portal page from drop down and in application parameter add below path :-
    ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/
    com.sap.pct.erp.ess.iviews/com.sap.pct.erp.ess.employee_search/com.sap.pct.erp.ess.whoiswho
    For change own data : - open launchpad and create new folder and add New application in that give name as Change Own data and select Application type as Portal page from drop down and in application parameter add below path and save it
                      ROLES://portal_content/com.sap.pct/every_user/
    com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.iviews/
    com.sap.pct.erp.ess.employee_search/com.sap.pct.erp.ess.changeowndata

  • How to change the default operators in sap web ui Search screen?

    How to change the default operators in sap web ui Search screen?
    For eg. Using advance search option , I have some fields with default operators like equals, contains,is between, is less than and is greater than. I don't need all these operators for this field.
    I need only "equals" operator. How do i remove the rest of the operators?

    There is a view cluster crmvc_dq where all the standard setting is present related to you r issue. Please try if you can modify that, that way you will avoid the code.
    Incase you are not able to make any changes there then in that case you have to redefine the method GET_DQUERY_DEFINITION () of the IMPL class to delete the operators for a particular serach field.
    Regards,
    Harshit

  • How can we customize the no of rows in Search options set?

    Hi all,
    I am using EP6 SP14, and i need to display the news from a folder based on a filter criteria ( like regions, etc) i am using a KM search iview with a query to search the items of the folder and the corresponding search options set limits the no of rows to a min 5 but i need only 3 items to be displayed with the page links to the browse the rest of the news. Can anyone suggest me if there is any way of customizing the no of rows or else i am thinking of using a KM navigation iview and using the corresponding query but strangely the layout doesnt work.....Anything i need to do more to limit the no of items to be displayed?
    Help would be greatly appreciated ,
    Santosh Kumar
    Edited by: Santosh Kumar Adapa on Nov 11, 2008 8:16 AM

    Hi Santosh,
    how about developing your own search?
    These blogs gives you a nice introduction of how to implement
    [How to write a Search Application using the KM Indexmanagement API for TREX|https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5586]:
    [Using the KM Indexmanagement APIs for searching with TREX|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9237e490-0201-0010-f3a1-9a322ccbd8b1]
    Best regards,
    Denis

  • How to use search option using TREX.

    How can i have a search option in the portal page where in a user types for some keyword and the results are displayed accordingly.
    Thanks
    Shreya....

    Shreya,
    http://help.sap.com/saphelp_erp2005/helpdata/en/72/b595166625664fbdc110d54639f27b/frameset.htm
    Maybe that link will help.
    Regards,
    Keith

  • How to disable the Search option in UWL header?

    Hello,
    I am trying to removed the search option in the standard UWL iView by setting the "Allow Search" property of the standard iView to "No". However this doesn't remove the search option in the UWL header. Is this right property to configure? If anybody has already been sucessful, please share the information.
    Regards,
    Shankar

    Hi Shankar,
    Per <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/0a/ad68c125ae496f8c04a25090bd2e3c/frameset.htm">SAP Documentation</a> on UWL Configuration,what you have done is correct. It may be an OSS issue.
    Regards,
    Suresh Datti

  • Query in Tool Bar Area Searching option.

    Hi All,
    There is a tool bar Searching iView with us.But when any user searches through it, the search option is working fine.But the results shows files with open folder and details option (as we do not want some user go inside details option and change the permissions settings of that file).Can anyone tell me how can we remove open folder and details options??
    Regards,
    Udit

    Hi,
    The UI Command Group resposible to show Open Folder,  See Also and  Details Commands is SearchSingleItemGroup.
    So open it and remove the browse_from_here and SingleDetailsGroup(expanded) UICommands.
    choose System Administration --> System Configiuration --> KM --> Content Management --> User Interface --> Commands --> UI Command Group.
    http://help.sap.com/saphelp_nw70/helpdata/en/9d/233f989a5ba64fa44ed6e0823286ee/frameset.htm
    Greetings,
    Praveen Gudapati

  • Alteration in search option in Tool Bar Area??

    Hi All,
    There is a tool bar Searching iView with us.But when any user searches through it, the search option is working fine.But the results shows files with open folder and details option (as we do not want some user go inside details option and change the permissions settings of that file).Can anyone tell me how can we remove open folder and details options??
    Regards,
    Udit

    Hello Udit,
    this link might be of some use to you.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/765140c770cd01e10000000a155106/frameset.htm
    Regards
    Ajey

  • GRC - SOD Conflict Management (SAP Role Substitution)

    Hi,
    I am looking to see how others handle SAP Role Substitution and SOD conflicts.
    For example, a person is going to be out on vacation for a few day and assigns their roles to another employees to continue with daily tasks....SOD risks result because of the temporary assignment and role combinations....what are you guys doing to manage, and monitor this sort of activity?
    Your help and comments greatly appreciated!

    Hi
    As already stated by Martin, one of the option for handling adtional backup access to users could be through Superuser Privilage management(If GRC has been implemented with your client). This would allow detailed reporting at transaction level for audit purposes.
    If GRC is not implemented with your client then any additional access which is resulting in SoD, there has to a proper documentation of temporary access assignment to users(For Audit purpose). Mitigation control should be documented and submitted by the supervisor of the user to the SoD team to ensure proper compliance is in place for the additional access provided to the user.
    Thanks.
    Anjan

  • Search help without search option

    Hi
    I would like to know how can i implement a search help in which i
    dont need a search option in the search help window.
    It should just display the list of available entries .
    I already have a search help with a search option,i need to modify the same.
    Please let me know..
    Regards
    Leon

    Hi,
              You will have to write a Search Help Exit and attach the search help to the search profile of the ordered product
    Refer the link
    https://forums.sdn.sap.com/click.jspa?searchID=3614449&messageID=1933569
    Regards

  • Webinar: Understanding TREX Indexing and Search Options

    <b>SAP NetWeaver Know-How Network Webinar: 
    Understanding TREX Indexing and Search Options
    Wednesday 25 August 2004
    11 a.m. EDT</b>
    On Wednesday 25 August, Larry Brambrut, an EP RIG Consultant, hosts the webinar titled  <b>Understanding TREX Indexing and Search Options</b> as part of the ongoing SAP NetWeaver Know-How Network Webinar Series.
    Here’s how Larry describes his webinar presentation:
    “This session will describe the enhancements to "Search and Classification"(TREX) in NetWeaver '04 and EP 6.0 SP2 Patch 6. The session will include a discussion of the CM enhancements such as new crawlers, new search UI options and plug-ins, and TREX enhancements such as the new TREX architecture, delta indexing, and new TREX Admin Tool.”
    SDN invites you to post your questions to the presenter prior to the webinar and continue the online discussion afterward.
    <b>How to Participate</b>
    (Please go to the SDN webinar schedule page to find more information)
    Dial-in Information:
    Date: Wednesday 25 August 2004
    Time: 11 a.m. EDT
    Within the U.S., call: +1.888.428.4473
    Outside the U.S., call: +1.651.291.0618
    Password: NetWeaver04
    WebEx Information:
    Topic: SAP NetWeaver Know-How Network
    Date: Wednesday 25 August 2004
    Time: 11 a.m. EDT
    Meeting Number: 742391500
    Meeting Password: netweaver04 (lowercase)
    WebEx Link: sap.webex.com
    Replay Information:
    A recorded replay of this call will be available for approximately three months after the webinar. Access this recording by dialing the appropriate number and using the replay access code 720155.
    Toll-free: +1.800.475.6701
    International: +1.320.365.3844
    <b>
    About the SAP NetWeaver Know-How Webinar Series</b>
    The SAP NetWeaver Know-How Webinar Series is driven by the SAP NetWeaver Regional Implementation Group (RIG), part of the SAP Development organization. The mission of the SAP NetWeaver RIG is to enable customers, employees, and partners to successfully implement the SAP NetWeaver solution. This SAP RIG has expertise in BI, EP, XI, and WebAS. They contribute their implementation expertise to the SDN implementation forums as well as to the SAP NetWeaver Know-How Webinar Series.
    <b>Disclaimer</b>
    SDN is not responsible for any changes to the webinar schedule. The webinar schedule may be changed or cancelled without prior notice.

    Hi there,
    I just read this thread, and maybe someone here can answer my current trex question:
    I have created an ordinary CM repository, and created an index with this repository as source. Now the problem: I would like to exclude files in the repository with specific mimetypes from the TREX indexing process.
    I have verified that the TrexValidMimetypes.ini does not contain any reference to the Mimetypes I'm creating, but never the less, the document titles are searchable and are returned when searching.
    How do I get around this issue?
    Is it possible in NW04 or EP6.0 SP3 PXXX??
    Regards,
    Hco

  • SAP NetWeaver Enterprise Search fails to install on VMWare

    Hello,
    i try to install SAP NetWeaver Enterprise Search 7.2 from
    SLES-10-SP3-SAP-APL-x86_64-GM-DVD1.iso with VMWare Player.
    The installation fails at point where i have to choose the location of SAP NetWeaver  Enterprise Search.
    Here are several options for device://, nfs://, ftp://, usb://, etc.
    Because of VMWare i am not sure if i can select them.
    1. Is it a must to select at this point of installation the NW ES 7.2? can i do it later on?
    2. Why do i have to choose SLES 10 at this point? must i do this?
    best regards,
    Eduard

    Hi Eduard,
    regarding your both questions:
    1. Is it a must to select at this point of installation the NW ES 7.2? can i do it later on?
    The easiest way is to select the installation path of the source files of NWES at this point.
    But you can do it as well later but you have to adjust by your own the installation config file "config.dat". This config file is needed by the appliance installer of NWES 7.2
    2. Why do i have to choose SLES 10 at this point? must i do this?
    Yes. You have to choose SLES 10. This is the only operation systems which is supported by NWES.
    Best regards
    Frank

  • Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?

    Search option for multiple lines in iPad for fixed layout ePub is not working. Is there any alternate way to search multiple lines in ePub?

    Hi SAP Gurus
    I need a big favour, I am trying to map serach string with internal order, my search string is MV-38610573 which I have mapped with posting rule 'GENT' which  debits bank account and credit revanue accounts but this revanue account requires assignment with internal order, so I have created another 3 search string with same search string 'MV-38610573' and mapped with BSEG-ASUFNR,60000LC ( internal order),3 (bdc account type) respectively, also maintained three entries in search string use which is for BDC FIELD NAME1, BDC FIELD VALUE 1 & BDC ACCOUNT TYPE 1,
    But this is not working it gives me following error,                                                                 
    > Error: (KI 235) Account 4421 requires an assignment to a CO object
    Your help will be highly appreciated,

Maybe you are looking for

  • How to use MacPro SATA ports 5&6 in Vista

    Just spent 2 days figuring this out, so in case someone else is banging their head here's the fix. To get Vista to enable all the SATA ports on a new MacPro ( so you can add eSATA or extra drives ) you need to force vista to use the "Standard AHCI 1.

  • Set exported resolution for each image within InDesign

    I'm generating a document in InDesign destined only for the screen (as a PDF) and I'm wondering whether in CS6 the user can set the exported resolution separately for each image. i.e click on a image and set the resolution for that image. Reason: to

  • 1password wont work because firefox is unsigned code, why?

    I can no longer use 1password to log into the myriad of accounts that I connect to using firefox. 1password worked fine until one of the latest automatic updates, and I do not no which one screwed it up. The error is that 1password says firefox is no

  • Can I save photos from iPad that I edited to my main computer?

    If I edit pictures on iPad can I then get them back in the edited for to my main computer. Their seems to be lots of photo apps but don't want the final pics just for my ipad would also want them in my main computer.

  • I want to take a SQL Server DBA L3 Handover in my new company

    Actually I have joined a new company and appoint as L3,I want to take Handover. I want to take a SQL Server DBA L3 Handover in my new company. Is there any process pdf / website or excel which I can follow. Thanks