SAP router server formated
Hi experts.
i have DEV, QAS,PRD landscape with ecc6 hp-ux. oracle data base.
sap router was installed in the win2003 server (separate server). and it was working perfectly one of my client has formatted the sap router server bcoz of virus. i have the backup of D://usr/sap/saprouter Directory. i have google and find that we can restore the DIR,
my query is .. after restore what should i do now..should i set the environmental variable after restore of the DIR,
please guide me.
thanks
hi all
i solved problem.
Edited by: trans_basis on Nov 10, 2009 9:22 AM
Hi,
Check you are able to test the connection to SAP Support using OSS1 t-code.
You must have the same host name as you had before.
Thanks,
Shambo
Similar Messages
-
Setting up SAP Router for SNC ... error...
Hi,
My SAP Router is installed on a server that is Linux based. (IP address is 10.11.0.24)
I'm not sure if is saprouttab or saprouter itself having issue.
I started the saprouter via this command: saprouter -r -G routerlog -W 60000 -S 3299 -K "p:CN=XXXXXXXX, OU=ZZZZZZZZZZ, OU=SAProuter, O=SAP, C=DE"
saprouttab
# SNC connection to and from SAP
KT "p:CN=sapserv9, OU=SAProuter, O=SAP, C=DE" 169.145.197.110 *
KT "p:CN=sapserv9, OU=SAProuter, O=SAP, C=DE" 10.11.0.24 3200
# SNC connection to local system for R/3-Support for support
KP "p:CN=sapserv9, OU=SAProuter, O=SAP, C=DE" 10.11.0.24 3200
KP "p:CN=sapserv9, OU=SAProuter, O=SAP, C=DE" 10.11.0.24 3201
KP "p:CN=sapserv9, OU=SAProuter, O=SAP, C=DE" 10.11.0.23 3200
# Access from local network to SAPNet (OSS)
P 10.11.0.* 169.145.197.110 3299
P * 10.11.0.* * *
# deny all other connections
D * * *
Troubleshooting steps taken:
Running niping -s on SAP Router Server & niping.exe -c -H 10.11.0.24 is successful, self-test is okay but... when running both niping -s & saprouter -r on SAP Router Server is giving me the following error:
C:\test>niping.exe -c -S 3299 -H 10.11.0.24
Wed Feb 05 14:51:29 2014
connect to server o.k.
Wed Feb 05 14:51:30 2014
*** ERROR => NiBufIProcMsg: hdl 1 received rc=-93 (NIEROUT_INTERN) from peer [nibuf.cpp 2146]
*** ERROR => NiTClientLoop: NiTReadLoop (rc=-93) [nixxtst.cpp 2590]
* LOCATION SAProuter 40.4 on 'XXXXXXXX'
* ERROR internal error
* TIME Wed Feb 5 14:51:29 2014
* RELEASE 720
* COMPONENT NI (network interface)
* VERSION 40
* RC -93
* MODULE nirout.cpp
* LINE 2698
* DETAIL NiRClientHandle: route expected
* COUNTER 2
C:\Users\tohcy\Desktop\test>niping.exe -c -S 3299 -H /H/10.11.0.24/H/10.11.0.24
Wed Feb 05 15:01:00 2014
*** ERROR => NiBufIProcMsg: hdl 1 received rc=-94 (NIEROUT_PERM_DENIED) from peer [nibuf.cpp 2146]
*** ERROR => NiBufIConnect: route connect for non-buffered hdl 1 failed (rc=-94;/H/10.11.0.24/H/10.11.0.24); pong not received [nibuf.cpp 4801]
*** ERROR => NiTClientLoop: NiHandle (rc=-94) [nixxtst.cpp 2590]
* LOCATION SAProuter 40.4 on 'XXXXXXXX'
* ERROR XXXXXXXX: route permission denied (YYY to 10.11.0.24, 3299)
* TIME Wed Feb 5 15:00:59 2014
* RELEASE 720
* COMPONENT NI (network interface)
* VERSION 40
* RC -94
* COUNTER 7Hi Deepak,
I've changed to the P * * *
I run the command: niping.exe -c -S 3299 -H /H/10.11.0.24/H/10.11.0.23
Can I check if this command is correct?
Router is 10.11.0.24 trying to reach sap server 10.11.0.23.
Error:
Thu Feb 06 09:20:17 2014
*** ERROR => NiBufIProcMsg: hdl 1 received rc=-5 (NIETIMEOUT) from peer [nibuf.cpp 2146]
NiBufIConnect: route connect of non-buffered hdl 1 to '/H/10.11.0.24/H/10.11.0.23' timeout
*** ERROR => NiTClientLoop: NiHandle (rc=-5) [nixxtst.cpp 2590]
* ERROR timeout occured
* TIME Thu Feb 06 09:20:17 2014
* RELEASE 720
* COMPONENT NI (network interface)
* VERSION 40
* RC -5
* MODULE nibuf.cpp
* LINE 4795
* DETAIL NiBufIConnect: route connect '/H/10.11.0.24/H/10.11.0.23'
* timeout
* COUNTER 1
routerlog:
Thu Feb 6 09:27:21 2014 CONNECT FROM C19/- host 10.11.0.181/50107
Thu Feb 6 09:27:21 2014 CONNECT TO S19/12 host 10.11.0.23/3299
Thu Feb 6 09:28:21 2014 CONNECT ERR S19/12 could not establish connection within 60s
Thu Feb 6 09:28:21 2014 DISCONNECT S19/12 host 10.11.0.23/3299
10.11.0.181 is my computer current IP address.
Any other clues/hint? -
RFC connection between two SAP systems (with SAP router)
Hi!
I would like to set up a RFC-connection from SAP Solution Manager to other SAP system.
The network connection between the servers is VPN.
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
my server --> customer
my server --> internal SAP Router server xy (10.101....) --> SAP Router customer 2 (10.1....) --> SAP System customer (134....)
Back-way
SAP Systeme customer --> SAP Router customer (134.1....) --> internal SAP router (212.6....) --> my server
How can I set up this RFC-connection, if my connection between two SAP systems looks as follows,
(I use the following SAP routers)?
something like:
/H/10.101..../S/sapdp99/H/10.1.4..../S/sapdp99/H/134...
Thank you very much!
regards
ThomSame answer as in the other forum where you cross posted....
-
Hi,
We are configured new installation of SAP Router. Router side it's working fine.
We are not able to connect OSS1. It's given error was "Service ? unknown".
Out saprouttab like
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 172.17.3.9 3200
P 172.17.3.25 194.39.131.34 3299
dev_rout showing this error.
***LOG Q0I=> NiPGetServByName: service 'sapdp99' not found: getservbyname [ninti.c 463]
Please check it and suggest me.
Regards
S.PrasadHello,
I already solve my problem. I had an error when I tried to log on at transaction OSS1 after I setup the saprouter configuration. It showed a window with the error "Unable to connect to SAPNet message server" and after service 'sapdb99' unknown".
The solution for this was put this entry sapdp99 3299/tcp in services file located in C:WINDOWSsystem32driversetc (on Window) on sap router server!!
After doing a restart the to service (services.msc) of SAP Router the problem has been overcome.
King regards,
João Dimas - Portugal -
SAP Router dev_rout file maintenence
Hi All,
We have file size 2 GB limitation on our SAP router server So we have to clean several times router trace file manually.
So I want to know do we have any method available which can maintain this file automatically and my manually intervention not required to clean necessery data.
Shivam MittalHi Shivam,
You can make use of Forfiles utility which is a part of MS 2000/2003/2008 resource kit.
or you can download the same from the link below
http://www.petri.co.il/download_free_reskit_tools.htm
Then create a batch file with following command
<path of Forfiles>/Forfiles -p "<path>" -s -m . -d -10 -c "Cmd /C del @FILE" (all files older than 10 days)
Then schedule this batch job in windows scheduler to automate the proccess.
Regards,
Deepak Kori -
SAP router error on windows server 2008 64bit
Hi All,
I am installing sap router on windows 2008 server 64 bit.
While trying to generate certificate request it showing below error.
E:\usr\sap\saprouter\nt-x86_64>sapgenpse get_pse -v -r certreq -p local.pse "CN=
solman, OU=000XXXXXXX, OU=SAProuter, O=SAP, C=DE"
Got absolute PSE path "C:\Users\soladm\sec\local.pse".
Please enter PIN:
Please reenter PIN:
Supplied distinguished name: "CN=solman, OU=000XXXXXXX, OU=SAProuter, O=SAP, C=
DE"
Creating PSE with format v2 (default)
get_pse: Can't create PSE.
ERROR in af_create: (4352/0x1100) could not flush : "SW-PSE"
ERROR in create_PSE: (4352/0x1100) could not flush : "SW-PSE"
ERROR in modified_PSEFile: (4352/0x1100) could not flush : "SW-PSE"
ERROR in flush_PSEFile: (1283/0x0503) Can't write file : "C:\Users\soladm\sec\lo
cal.pse"
ERROR in aux_OctetString2file: (1283/0x0503) Can't write file : "C:\Users\soladm
\sec\local.pse"
I couldn't find the cryptography software specifically for windows 2008 server 64 bit ? So I downloaded the software for windows server 64 bit platform.
Do any one have idea on this...
Please reply..
Regards
VinayHi,
Yes, there is no specific cryptography software for windows server 2008 and whatever u have chosen is correct.
Fom the following error message I could see where the issue arises.
Can't write file : "C:\Users\soladm\sec\local.pse"
I think you have not set the following ENV variable for the SAPRouter admin user (in your case soladm) and hence the sapgenpse tries to import the certificate in the SOLADM user's document folder.
Set the following variables for the user SOLADM and then try to import the certificate as mentioned in the [link|http://service.sap.com/saprouter-sncdoc].
SECUDIR = E:\usr\sap\saprouter
SNC_LIB = E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll
Hope this resolves ur issue.
Regards,
Varadharajan M -
Business Connector and sap router on same server?
Hello,
We are investigating currently in order to install "Business Connector" and "Sap router" on a same dedicated server.
I would like to know if it is possible or not recommended, etc... if there are some guidelines.
If someone has experience in this solution.
Many thanks for your helpI can't see a reason why not... any particular concerns?
Regards
Juan -
Quality Server not connect through SAP Routing String
Hi,
When remotely access client SAP through SAP routing string in Quality Server it shows error message as
"timeout occured
Location : SAP router 37.11 on solman
Time: Tue May 05 11:19:37 2009
Component : NI (Network Interface)
Release : 640
Version : 37
Return Code : -93
Counter : 131 "
Here GUI version is 7.1(where from connecting). Client SAP version is ECC 5.0 and they use GUI 6.4 version. But Development server is being connected through SAP Routing String.
Regards,
SamratYou might want to check following things:
Can you do a ping to the IP address you specified?
Is the data correct (ip, host, system number,...)?
Is the gateway with system number 00 running on the server?
Did you install the SAP RFC SDK dll's?
Glenn Colpaert - MCTS BizTalk Server - Blog : http://blog.codit.eu -
Exchange 2010 route email to SAP smtp server
Hi,
we have a Exchange2010 infrastructure, i need to route email received to a specific address: [email protected], to a SAP smtp server: serverip:25000
How can i obtain this?
Thanks in advanceHi,
Please review note 455140.
Settings on the mail server (SAP-external configuration)
To be able to receive mails in the SAP system, you need to set your mail server so that certain mail addresses are forwarded to one or several SAP systems or clients. For this purpose, you need to define routing rules that assign a mail host and/or port to address areas (generic address parts, usually the domain), for example:
*@crm-prod.company.com --> SAPWASHost:25000
*@crm-test.company.com --> SAPWASHost:25001
For more information about the exact setting procedure, see the mail server documentation.
Thank you.
Best regards,
Ciarán -
Hi All,
I have installed SAP Router before but this time when I installed and tried to start SAP Router its not getting started, and also not giving any error log file in SAP Router directory.
Please check the below command and correct me if I am wrong.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Documents and Settings\sap_admin>cd \
C:\>cd SAPRTR
C:\SAPRTR>saprouter -r -S 3299 -K "p:CN=<MyRouterHOSTNAME>, OU=<Cust_NUM>, OU=SAProuter,
O=SAP, C=DE"
SAP Network Interface Router, Version 38.10
Compiled Oct 7 2009 03:08:09
start router : saprouter -r
stop router : saprouter -s
soft shutdown: saprouter -p
router info : saprouter -l (-L)
new routtab : saprouter -n
toggle trace : saprouter -t
cancel route : saprouter -c id
dump buffers : saprouter -d
flush " : saprouter -f
hide errInfo : saprouter -z
start router with third-party library: saprouter -a library
additional options
-R routtab : name of route-permission-file (default ./saprouttab)
-G logfile : name of log file (default no logging)
-T tracefile : name of trace file (default dev_rout)
-V tracelev : trace level to run with (default 1)
-H hostname : of running SAProuter (default localhost)
-S service : service-name / number (default 3299)
-P infopass : password for info requests
-C clients : maximum no of clients (default 800)
-Y servers : maximum no of servers to start (default 1)
-K [myname] : activate SNC; if given, use 'myname' as own sec-id
-A initstring: initialization options for third-party library
-D : switch DNS reverse lookup off
-E : append log- and trace-files to existing
-J filesize : maximum log file size in byte (default off)
-6 : IPv6 enabled
-Z : hide connect error information for clients
expert options
-B quelength : max. no. of queued packets per client (default 1)
-Q queuesize : max. total size for all queues (default 20000000 bytes)
-W waittime : timeout for blocking net-calls (default 5000 millisec)
-M min.max : portrange for outgoing connects, like -M 1.1023
-I address : address for outgoing connects, like -I 155.56.76.6
this is a sample routtab : -----------------------------------------
D host1 host2 serviceX
D host3
P * * serviceX
P 155.56.. 155.56
P 155.57.1011xxxx.*
P host4 host5 * xxx
P host6 localhost 3299
P host7 host8 telnet
S host9
P0,* host10
KP sncname1 * *
KS * host11 *
KD "sncname "abc" * *
KT sncname3 host11 *
deny routes from host1 to host2 serviceX
deny all routes from host3
permit routes from anywhere to any host using serviceX
permit all routes from/to addresses matching 155.56
permit ... with 3rd byte matching 1011xxxx
permit routes from host4 to host5 if password xxx supplied
permit information requests from host6
permit native-protocol-routes to non-SAP-server telnet
permit ... excluding native-protocol-routes (SAP-servers only)
permit ... if number of preceding/succeeding hops (SAProuters) <= 0/*
permit SNC-connection with partnerid = 'sncname1' to any host
permit all SAP-SAP SNC-connections to host11
deny all SNC-connections with partnerid = 'sncname "abc'
open connects to host11 with SNC enabled and partnerid = 'sncname3'
first match [host/sncname host service] is used
permission is denied if no entry matches
service wildcard (*) does not apply to native-protocol-routes
C:\SAPRTR>
Rg
RameshHello my friend
It could be certificate didn't import properly or routtab content is not correct. Here's your checklist:
Creating the certificate request
1) As user <snc_adm> set the environment variables SNC_LIB and SECUDIR
2) Change to the alias SAPROUTER-SNCADD. From the list of SAProuters registered to your installation, choose the relevant u201CDistinguished Nameu201D.
3) Generate the certificate Request with the command:
sapgenpse get_pse -v -r certreq -p local.pse u201C<Distinguished Name>u201D
You will be asked twice for a PIN here. Please choose a PIN and document it, you have to enter it identically both times. Then you will have to enter the same PIN every time you want to use this PSE.
4) Display the output file "certreq" and with copy&paste (including the BEGIN and END statement) insert the certificate request into the text area of the same form on the SAP Service Marketplace from which you copied the Distinguished Name.
5) In response you will receive the certificate signed by the CA in the Service Marketplace. Copy&paste the text to a new local file named "srcert", which must be created in the same directory as the sapgenpse executable.
6) With this in turn you can install the certificate in your saprouter by calling:
sapgenpse import_own_cert -c srcert -p local.pse
7) Now you will have to create the credentials for the SAProuter with the same program (if you omit -O <user_for_saprouter>, the credentials are created for the logged in user account).
sapgenpse seclogin -p local.pse -O <user_for _saprouter>
Note: The account of the service user should always be entered in full <domainname>\<username>
8) This will create a file called "cred_v2" in the same directory as "local.pse"
9) Check if the certificate has been imported successfully with the following command:
sapgenpse get_my_name -v -n Issuer
The name of the Issuer should be:
CN=SAProuter CA, OU=SAProuter, O=SAP, C=DE
10) If this is not the case, delete the files "cred_v2"and "local.pse" and start over at Item 3.
Additional actions necessary before you can start SAProuter
1. Check if the environment of the user running SAProuter contains the environment variable SNC_LIB and SECUDIR
2. Start the SAProuter with the following command line (to start the SAProuter as a Windows service, please follow the steps described in SAP note 525751):
saprouter -r -S <port> -K "p:<Distingushed Name>"
-K tells the saprouter to start with loading the SNC library
3. The corresponding file "saprouttab" should look like:
SNC-connection from and to SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
SNC-connection from SAP to telnet in your network
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
P * 194.39.131.34 3299
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" <your IP> <port>
Regards,
Effan
DON'T KNOW WHY THE FORMAT MESSED UP, PLEASE USE QUOTE ORIGINAL IN REPLY MODE TO READ THE CORRECT FORMAT CONTENT. SORRY! -
BO 4.0: Database error:Unable to connect to SAP BW server Incomplete logon
Hello Experts,
I have enabled a 'SSO to database' between SAP BW and Business objects by referencing to the documents related to below link.
http://wiki.sdn.sap.com/wiki/display/BOBJ/HowtosetupSSOagainstSAPBWinSBOBI4.0forLDAPusers
I have created a universe connection with option 'use single sign on when refreshing reports at view time' and have created a universe on top of my BEx query by log-in to the universe designer tools using my LDAP account.
Now when I run the report with either SAP account or LDAP - I am able to run a adhoc webi report on this universe and get data either through the webi rich client or via BO 4.0 Info-view/Launch Pad.
But the issue is that when other users are trying to run webi queries on this universe either through Info-view/launch pad or rich client by log-in via LDAP Authentication - they get the below error: I have given SAP_ALL to this user for time being and also have done the necessary configuration for 'simple user format' in CMC so these user has 1 account with 3 alias definitions: Enterprise, SAP, R/3.
Database error: Unable to connect to SAP BW server Incomplete logon data -
If the user logs on into the BO 4.0 Info-view/launch pad or webi rich client using his SAP authentication than he is able to run and retrieve data.
I also get a dump in the SAP BW system - I analyzed the dump in SAP BW using st22 tcode and it gives the error short text as - Incomplete logon data and run-time error - CALL_FUNCTION_SIGNON_INCOMPL
Desired outcome:
I want the users to log-in to webi rich client or BO 4.0 Launch pad/Info-view using their 'LDAP' authentication and run reports against the universe on SAP BW/BEx query without any errors or additional username/password requirements.
Can someone please tell me if I am missing any steps/configuration and guide me to achieve the above mentioned desired result ?
Any help in this matter would be greatly appreciated.
Thanks & regards,
CD.Whether your problem is solved?
We have the same problem in BO Mobile.
Two users from one BW-role, BO-groups; one user report is executed, another user - error incomplete logon data. In Web Intelligence both users reports succeeds. -
Reading of File from legacy system into SAP Application Server using SAP XI
Hi All,
I have a file in <b>Legacy System with Exchange rates information data</b> i have to read that file using SAP XI process and put that file in SAP Application Server in SAP Specific Format and latter i have to use program RFTBFF00 to upload the file in the Application Server into SAP Tables.
Can anybody tell me how can i do this with some example of same scenario.
It would be better if anybody provides code example as i am new to SAP XI.
Thanks in advance.
Warm Regards,
Rayeez.Hi Shaik,
You need the access to the file system of ur legacy application and then you can follow this link for the required ifnormation
File & Header
Regards
Vishnu -
JCO Creation error using SAP router string
Hi All,
I have created technical system using customer system IP. After that I have created the JCO
I have given the details while creating a JCO:
JCO Name : <Name>
Client detail: <Client>
Message Server :< hostname>
Logon Group :<SPACE>
SAP Router String :< /H/<host IP>/H/S/<message server port number>
User Name :<User name>
Password :<***>
I have updated the Host and service file in the portal server.
When I am testing the JCO I got an exception:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=dicisap1 GROUP=PUBLIC R3NAME=DCD MSSERV=sapmsDCD SAPROUTER_STRING=/H/<RouterIP>/S/3600 PCS=1 LOCATION SAProuter 37.11 on SOLNMAN ERROR timeout occured TIME Wed Nov 05 17:42:31 2008 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -93 COUNTER 4825
How to resolve this problem ?
Regards,
Boopathi MHi
Check out these thread
/message/5401584#5401584 [original link is broken]
JCO$Exception: (102) RFC_ERROR_COMMUNICATION: CPIC-CALL: 'SAP_CMACCPTP'
Thanks -
Hello All
We are facing the following issue while starting the SAP router. The router just hangs with the following statement in the command prompt.
trcfile dev_rout
no logging active
upon providing trace level 3 and looking into the dev_route file, the following information is found.
Please help in suggesting possible resolution.
trc file: "dev_rout", trc level: 3, release: "742"
Thu Apr 23 19:06:49 2015
NiIHSBufInit: initialize hostname buffer (IPv4)
NiHLInit: alloc host buf (200 entries)
NiSrvLInit: alloc serv bufs (200 entries)
NiIInit: allocated nitab (811 at 00000000041A2610)
NiIInit: host/serv bufs already initialized
SAP Network Interface Router, Version 40.4
Compiled Mar 30 2015 18:27:50
command line arg 0: saprouter
command line arg 1: -r
command line arg 2: -V
command line arg 3: 3
command line arg 4: -K
command line arg 5: p:CN=USCINSAPSVR10, OU=0000454027, OU=SAProuter,O=SAP, C=DE
service : 3299
routtab : ./saprouttab
plug-in : no plug-in
-argument: 'no argument'
clients : 800
max servers : 1
quelength : 1
maxheap : 20000000
timeoutL : 5000
tracefile : dev_rout
tracefile limit : 0 byte
tracefile maxcnt : 0
socket buffer size : 32768
logfile : no logging active
portrange : no portrange active
local address : default address
->> SncInit(prg=0, ini_fname=(NULL), &sec_avail=000000000213F148)
SncInit(): Initializing Secure Network Communication (SNC)
PC with Windows NT (mt,ascii,SAP_UC/size_t/void* = 8/64/64)
GetUserName()="um1adm" NetWkstaUser="um1adm"
SncInit(): Trying environment variable SNC_LIB as a
gssapi library name: "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll".
DlLoadLib success: LoadLibrary("E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"), hdl 0, count 1, addr 0000000010000000
using "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): failed GetProcAddress("sapsnc_init_adapter") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
with error 127 = "The specified procedure could not be found."
DlLoadFunc(): successful GetProcAddress("gss_acquire_cred") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_release_cred") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
Thu Apr 23 19:06:49 2015
DlLoadFunc(): successful GetProcAddress("gss_init_sec_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_accept_sec_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_process_context_token") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_delete_sec_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_context_time") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_get_mic") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_verify_mic") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_wrap") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_unwrap") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_display_status") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_indicate_mechs") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_compare_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_display_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_import_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_release_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_release_buffer") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_release_oid_set") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_inquire_cred") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_inquire_cred_by_mech") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_inquire_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_wrap_size_limit") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_export_sec_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_import_sec_context") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_inquire_names_for_mech") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_inquire_mechs_for_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_canonicalize_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("gss_export_name") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
File "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll" dynamically loaded as GSS-API v2 library.
DlLoadFunc(): successful GetProcAddress("sapcr_get_version") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
DlLoadFunc(): successful GetProcAddress("sapcr_get_secudir") from "E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll"
SECUDIR="E:\usr\sap\saprouter" (from $SECUDIR)
The internal Adapter for the loaded GSS-API mechanism identifies as:
Internal SNC-Adapter (Rev 1.1) to SAPCRYPTOLIB 5.x
Product Version = SAPCRYPTOLIB 5.5.5C pl38 (Oct 7 2014) MT,AESNI,NB
<<- SncPDLInit()==SAP_O_K
<<- SncInit()==SAP_O_K
sec_avail = "true"
->> SncSetMyName(snc_hdl=0000000000000000, myname="p:CN=USCINSAPSVR10, OU=0000454027, OU=SAProuter,O=SAP, C=DE")
<<- SncSetMyName()==SAP_O_K
in: myname = "p:CN=USCINSAPSVR10, OU=0000454027, OU=SAProuter,O=SAP, C=DE"
NiBufISetParam: set max heap to 20000000
Thu Apr 23 19:06:49 2015
NiSetParamEx: switch NIP_CONNLOCAL off (not supported by platform)
NiSetParamEx: set NIP_SOCK_BUFFER_SIZE 32768
NiMyHostName: hostname = 'USCINSAPSVR10'
main: pid = 13232, ppid = 0, port = 3299, parent port = 0 (0 = parent is not a saprouter)
NiSelICreateSet: new set0
SiSelNInit: allocate 172528 bytes for FI (811)
NiSelIInit: size of set0 is 811
NiICreateHandle: hdl 1 state NI_INITIAL_LIS
NiIInitSocket: set default settings for new hdl 1/sock 508 (I4; ST)
Windows Version 6.1, Build 7601
Running on Windows Vista
NiITraceByteOrder: CPU byte order: little endian, reverse network, low val .. high val
NiIBind: hdl 1 bound to 3299 (IP only)
NiIBlockMode: set blockmode for hdl 1 FALSE
NiIListen: state of hdl 1 NI_LISTEN
SiSelNSet: sock 508 added to set pos 0
NiSelIAddMsg: added hdl 1 to set0
SiSelNSet: set events of sock 508 to: rp-
reading routtab: './saprouttab'
<<- SncNameToAclKey_r()==SAP_O_K
in: name = "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
'aclkey ' (addr=0000000003E5FF60, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632 pserv2
NiStrToAddrMask: '194.39.131.34' -> 194.39.131.34/32 (0/0)
<<- SncNameToAclKey_r()==SAP_O_K
in: name = "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
'aclkey ' (addr=0000000003E5FF60, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632 pserv2
addrinfo of 'USCINSAPSVR09':
0: 192.168.120.19:0 Thu Apr 23 19:06:49 2015
'USCINSAPSVR09' <unknown socket type 0> (0-2-0-0-16)
1: 192.168.120.19:0 <unknown socket type 0> (0-2-0-0-16)
NiHLGetNodeAddr: got hostname 'USCINSAPSVR09' from operating system
NiIGetNodeAddr: hostname 'USCINSAPSVR09' = addr 192.168.120.19
NiIGetServNo: servicename '3200' = port 3200
NiStrToAddrMask: '192.168.*.*' -> 192.168.0.0/16 (0/1)
NiStrToAddrMask: '194.39.131.34' -> 194.39.131.34/32 (0/0)
contents of routtab ('./saprouttab', 3 entries):
KT*,*<<- SncAclKeyToName()==SAP_O_K
'aclkey ' (addr=00000000042354D4, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632 pserv2
out: name = "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
p:CN=sapserv2, OU=SAProuter, O= 194.39.131.34/32 * *
KP*,*<<- SncAclKeyToName()==SAP_O_K
'aclkey ' (addr=000000000423599C, len=86) full hexdump
0x00000 00030401 00080606 2b240301 25010000 ........ +$..%...
0x00010 00443042 310b3009 06035504 06130244 .D0B1.0. ..U....D
0x00020 45310c30 0a060355 040a1303 53415031 E1.0...U ....SAP1
0x00030 12301006 0355040b 13095341 50726f75 .0...U.. ..SAProu
0x00040 74657231 11300f06 03550403 13087361 ter1.0.. .U....sa
0x00050 70736572 7632 pserv2
out: name = "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE"
Thu Apr 23 19:06:49 2015
p:CN=sapserv2, OU=SAProuter, O= 192.168.120.19/32 3200 p
P*,* 192.168.0.0/16 194.39.131.34/32 * *
******* NI-ROUTER LOOP ********
SiSelNSelect: start select (timeout=-1)** Trace file opened at 20150417 112112 Eastern Daylight Time, by disp+work
** Versions SAP-REL 721,0,201 RFC-VER U 3 1459980 MT-SL
ror RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
: Hostname or service of the message server unknown
ST =CONNECTION_PING
HOST =H/192.168.152.50/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
NAME =OSS
OUP =1_PUBLIC
AP Programm: CL_DSMOP_RFC_WATCHER==========CP (Transaction: )
er: SOLMAN_BTC (Client: 100)
stination: SAP-OSS (Handle: 1, DtConId: 00000000000000000000000000000000, DtConCnt: 0, ConvId: ,)
P RootContextId: 74D4356C5F6B1ED4B6E3593B0548B699, ConnectionId: 74D4356C5F6B1ED4B6E35960B5B7D699, ConnectionCnt: 1
P TransactionId: 5B15E5E476B3F1738EAD74D4356C5F6B
** Trace file opened at 20150417 112113 Eastern Daylight Time, by disp+work
** Versions SAP-REL 721,0,201 RFC-VER U 3 1459980 MT-SL
ror RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
: Hostname or service of the message server unknown
ST =SAP-OSS
HOST =H/192.168.152.50/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
NAME =OSS
OUP =1_PUBLIC
AP Programm: CL_SM_DATA_SENDER_RFC=========CP (Transaction: )
er: SOLMAN_BTC (Client: 100)
stination: SAP-OSS (Handle: 2, DtConId: 00000000000000000000000000000000, DtConCnt: 0, ConvId: ,)
P RootContextId: 74D4356C5F6B1ED4B6E3593B0548B699, ConnectionId: 74D4356C5F6B1ED4B6E35960B5B7D699, ConnectionCnt: 1
P TransactionId: 5B15E5E476B3F1738EAD74D4356C5F6B
** Trace file opened at 20150417 112113 Eastern Daylight Time, by disp+work
** Versions SAP-REL 721,0,201 RFC-VER U 3 1459980 MT-SL
ror RFCIO_ERROR_SYSERROR in abrfcpic.c : 2825
: Hostname or service of the message server unknown
ST =SAP-OSS
HOST =H/192.168.152.50/S/sapdp99/H/194.39.131.34/S/sapdp99/H/oss001
NAME =OSS
OUP =1_PUBLIC
AP Programm: CL_SM_DATA_SENDER_RFC=========CP (Transaction: ) -
Connection to R/3 with SAP Router
Hello,
I want a connecton from XI 3.0 to R/3 with SAP Router.
But if i want to import the RFCs i become no connection.
I Edit Software Component Version, but there is it not possible to set any Sap Router String.
For Connection Data you can only set System, Client, Message Server and
Group.
I have also test to write the Router String before the Message Server IP without any sucess. Not enough Place to write the holfe Path in the Field.
I become no connection to the R/3 to import the RFCs.
Regards,
Robinpls check correct port number..
basis will give u this information. or u use tcode SCOT.
Maybe you are looking for
-
Slow performance of alv report
Hi, I have developed Invoice Register Report in ALV, there 25 Selection Feild all multiple range , 98 coulmns & 26 database tables r used . its a very bulky report. i did optimized coding. still it is very slow . can anybody tell me the reason or an
-
Export Media not working Mac CC 2014 8.1.0 (81) build
I have been using Premier Pro CC (2014) for months and it's been working fine until today. Today I opened an older project that was done in CC (not CC 2014) and CC (2014) was very unstable. I noticed there was an update so I updated it. Now It is VER
-
Itunes wont install!! please help!!!!! gettin very annoyed !
Okay so I have an HP windows 8 laptop and I've tried downloading itunes like 10 times and still nothing!! Everytime it downloads and gets ready to install I get a "error 2" message saying "Apple application support was not found" "Apple application s
-
InDesign, Adobe Acrobat & Bookmarks
I have InDesign CS4 (v. 6.0.6). All of a sudden when I export a 5 file book to a PDF file none of the index entry links work. They are created as is the TOC links, but they all take me to the front page of the book. Frustrating!!! I've unchecked
-
Please help me to have some knowledge on this
Can any one give me 'a model of blue print along with some examples of gaps and it's solution in the project'? Please help me to have some knowledge on this.