SAP Router Status is Cancel!! ???? Plz Help!! Urgent!!
Hi,
I am trying to open a connection for one of my systems, but the status of router is showing cancel... for that, my other opened connections are showing in gray color. what should I do 1st step?
Thanks,
I will post Points for sure!!
Thanks,
You might want to start by turning on both the logging and the trace features for saprouter. Here is a quick example from the docs (and a link below):
For logging:
saprouter -r -G <log file>
http://help.sap.com/saphelp_nw70/helpdata/en/4f/992e2a446d11d189700000e8322d00/frameset.htm
For setting up the trace:
saprouter -r -T <tracefile>
http://help.sap.com/saphelp_nw70/helpdata/en/4f/992e2a446d11d189700000e8322d00/frameset.htm
Hope that helps.
J. Haynes
Denver, CO
Similar Messages
-
SAP Router status shows cancelled in SMP
Dear all,
We have an issue in SAP Router - SMP.
I have checked SAP status , its shows cancelled in Service market place.
we could not able access SAP through Router string .
Kindl;y advise.The envieroment variables are ok,
Check the saprouttab file in C:\saprouter, open the saprouttab file and check entries.
Example saprouttab
SNC connection to and from SAP
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC connection to local system for R/3-Support
R/3 Server: 192.168.1.1
R/3 Instance: 00
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.1 3200
SNC connection to local WINDOWS system for WTS, if applicable
Windows server: 192.168.1.2
Default WTS port: 3389
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.2 3389
SNC connection to local UNIX system for SAPtelnet, if applicable
UNIX server: 192.168.1.3
Default Telnet port: 23
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.3 23
SNC connection to local Portal system for HTTP URL access, if applicable
Portal server: 192.168.1.4
HTTP Port: 50003
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.168.1.4 50003
Access from the local Network to SAP
P 192.168.. 194.39.131.34 3299
Deny all other connections
D * * *
More info in:
http://service.sap.com/access-support
Technical Prerequisites -> How to establish Internet Connections -> SNC: Installing crypto functions
I hope that you can solved your issue -
well i set a passcode on my iphone 4 and ive forgotten it i have no idea what to do and i only just got this phone plus i dont want to do these bypassing with emergancy call just in case i get it wrong plz help (urgent)
If you set the phone to erase on 10 failed passcodes - then just keep typing and it will wipe itself.
Otherwise I believe you can set it to recovery mode and restore etc.. via iTunes... There is no easy way as the passcode is designed to protect the phone exactly against what you are trying to do now...
http://osxdaily.com/2011/01/08/iphone-recovery-mode/
Others may have some additional tips !
Sorry for the probs you are having...
Regs Neil -
Ip to location ......plz help urgent
Hi all,
i need a code which finds out/tracks IP address of a machine and based on that it helps to find out which country it is.i mean based on specific IP ,i get to know country and on that basis Locale can be set.Ultimately when the page renders it shows that county language.
Plz help me out to solve out this issue and its urgent.
Any materials(tutorials,sample code) would be quite helpful for me.
Thanks in advance.Hi Frank
Thanks for ur reply.
Yes its a web application but as i had described above i need to set locale/multilingual on the basis of users ip.ip will tell the location and after that locale can be set.
Plz tell me desired sol.
Thnks -
UTL_FILE help..Plz Help urgently
CREATE OR REPLACE PROCEDURE test_file
AS
n_output_file_handle UTL_FILE.file_type;
/**************************Beginning of the procedure **********************/
BEGIN
--DBMS_OUTPUT.ENABLE(2000000);
DBMS_OUTPUT.put_line('p_utl_dir:');
DBMS_OUTPUT.put_line('c_output_file_name:'|| 'test.txt' );
n_output_file_handle := UTL_FILE.fopen ('C:\MPPI','test.txt','w');
UTL_FILE.put_line (n_output_file_handle, 'test1');
UTL_FILE.fclose(n_output_file_handle);
I have this procedure to write text to a file. I execute this on my own machine but it does not write to the file.I exceute it from SQLPlus by execute test_file();.It says proc successfully completed but nothing is written to text file.
Could somone plz help me with this urgently.Hi, what is the value for the parameter UTL_FILE?
You use an absolute path for the directory to write to in you r procedure.
If you would use a directory object in the database to specify where to write to you would not need to set UL_FILE parameter.
Regards,
Lutz -
I want to have 3 tabs say Tab1, tab2, tab3 in my page and based on which tab is clicked , I have to display the contents of a table.
Ex: if Tab1 is clicked, i have to display contents of Table1 and tab2,table2 and so ...
Plz help with how to link the click on the tab to calling of the JSP file which retrives and displays the data???....
Its urgent ;plz helpdnamiot ,
I'm also looking for similar funcitonality.
the URL mentioned in your reply is not free ware. you know, it is tough to convince management to buy a software for the project even it is $1.
So if you know any taglibrary which is free ware , which generates maximum of 4 tabs and dynamic in nature, please let me know.
Thanks in advance
tekbond -
ALV codeing...plz help urgent
Hi Experts,
I am new to Abap.i hav a simple spec but i need to do it in ALV so plz help me.
Sales organization LIKP VKORG
Shipping point/receiving pt LIKP VSTEL
Delivery LIKP VBELN
Delivery date LIKP LFDAT
Delivery type LIKP LFART
Pland gds mvmnt date LIKP WADAT
Actual gds mvmet date LIKP WADAT_IST
Ship-to party LIKP KUNNR
Sold-to party LIKP KUNAG
Posting Status Customized fields ZCHK
If LIKP-WADAT = WADAT_IST, then print "OK", else " Posting Error"
this is a small requirment.plz help me in this it should be in ALV format.
correct answers will will given full points.
Thnaks & Regards
Sunita.
PLz Experts plz help me.Hi,
First get the a data into internal table first then fill the field catalog and give it to FM.
For futher reference <b>Goto to se80 and givepackage slis and see the programs in
slis.</b>type-pools: slis.
data:
i_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'MATNR'.----
> internal-table fieldaname
wa_fieldcat-tabname = 'I_MARA'.-------> Internal table name
wa_fieldcat-reptext_ddic = 'Material no.'.
wa_fieldcat-outputlen = '18'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERSDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Creation date'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'ERNAM'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = 'Name of Person'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'LAEDA'.
wa_fieldcat-tabname = 'I_MARA'.
wa_fieldcat-reptext_ddic = ' Last Change'.
wa_fieldcat-outputlen = '10'.
APPEND wa_fieldcat TO i_fieldcat.
ENDFORM. " prepare_fieldcatalog
*& Form display_alv
text
--> p1 text
<-- p2 text
FORM display_alv .
Call ABAP List Viewer (ALV)
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
it_fieldcat = i_fieldcat----->fieldcat name
tables
t_outtab = i_mara.------> internal table
ENDFORM. " display_alv
<b> plzzzz reward points if it is useful.</b> -
Binary addition,subtraction and modulus...plz help urgent
plz help me on this query...
i need to pass two 512 bit number as string,then convert them to binary and
then perform binary addition,subtraction,modulus operations on those two numbers.finally convert result to integer.
i designed a code which doesnt work correct.it is:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package bytearrayopeations;
import java.math.BigInteger;
* @author sheetalb
public class binaryadding {
public static void main(String[] args) {
BigInteger a = new BigInteger("123456");
BigInteger b = new BigInteger("5121");
String bb1 = a.toString(2);
String bb2 = b.toString(2);
String ss1 = null;
String ss2 = null;
String result = "";
String carry="0";
System.out.println("first value=" +bb1);
System.out.println("second value=" +bb2);
int k=bb1.length();
int h=bb2.length();
System.out.println("length 1="+ k);
System.out.println("length 2=" +h);
int p=h-k;
//System.out.println("difference=" +p);
int q=k-h;
//System.out.println("difference 2=" +q);
if(h==k)
else if(h>k)
for(int i=0;i<p;i++)
bb1="0"+bb1;
System.out.println("new value of first=" +bb1);
else if(h<k)
for(int i=0;i<q;i++)
bb2="0"+bb2;
System.out.println("new value of second=" +bb2);
StringBuffer sb1=new StringBuffer(bb1);
StringBuffer sb2=new StringBuffer(bb2);
bb1=sb1.reverse().toString();
bb2=sb2.reverse().toString();
//System.out.println("rev. buffer1=" +bb1);
//System.out.println("rev. buffer2=" +bb2);
for(int i=0;i<bb1.length();i++)
ss1=bb1.substring(i,i+1);
ss2=bb2.substring(i,i+1);
System.out.println("value1=" + ss1 + " " + "value2=" + ss2);
if (ss1.equals("0") && ss2.equals("0"))
if (carry.equals("0"))
result+="0";
else
result+="1";
else if (ss1.equals("1") && ss2.equals("1"))
if (carry.equals("0"))
result+="0";
carry="1";
else
result+="1";
carry="1";
else if (ss1.equals("0") && ss2.equals("1"))
if (carry.equals("0"))
result+="1";
carry="0";
else
result+="0";
carry="1";
else if (ss1.equals("1") && ss2.equals("0"))
if (carry.equals("0"))
result+="1";
carry="0";
else
result+="0";
carry="1";
System.out.println("sum=" +result + " " + "carry" + carry);
result+=carry;
StringBuffer sb3=new StringBuffer(result);
result=sb3.reverse().toString();
System.out.println("result is " +result);
System.out.println("Binary = "+ result + ", Decimal = "+Integer.parseInt(result,2));
}plz provide me or email me if possible java coding for all three operations as soon.
[email protected]One thread is enough. Continue here:[http://forums.sun.com/thread.jspa?threadID=5373720&messageID=10643157#10643157]
-
Under company code 7245 I m doing stock transfer from 7245 plant to 7246 plant
supplying plant 7245 recieving plant 7246 ccode 7245
n sales area in supplying plant is 7245-7a-7a
now in this sales area ive created a customer 7246 to represent recieving plant
on the oher side in 7246 ive created vendor 7245
now in
SPROMMPO-SET UP STOSHIPPING DATA
for plant 7246 ive given cust num plant:7246 sales area 72457a7a
and
for plant 7245 ive kept cust num plant blank
and sales area 72457a7a
n shipping point det in 7246 cust mast shipping cond is 7a
loading group in material is 7245 for plant 7245
and for material in 7246 the lopading group is 7246
the shipping pt det is as follows
7a-724572457245(shipping cond-loading group-plant-shipping point)
now when i m creating po in me21n
i m getting warning message
ship point 7245 not allowed for ship cond 7a loading group 7245 plant 7245
its only a warning
but it is picking up 7245 as shipping point
now vl10g is also fine
i m getting the delivery doc number
n vl02n and migo is fine
now
my doubt is
wat r the settings so that i can do both ways
see with the above setting i m able to send stock frm 7245 plant to 7246
but i m not able to configure stock transfer from 7246 to 7245
mainly i wan settings @ SPROMMPO-SET UP STOSHIPPING DATA
i ve created customer 7245 in 7246-7a-7a
and vendor 7245 in purch org 7246
cant be both settings be standard
so that stock can be sent any ways
because both plants belong to same ccode and stock can be ransfered both ways,is this scenario possible??/
or sto is only one way ??
plz clarify
i ve already spent a lot of time on this plz help me out.
anil
Edited by: anil singh on Mar 12, 2008 5:37 PMHi,
Create the customer in the delivering Sales Area/Plant/CC and assign this customer to the recieving plant in the MM> purchasing> STO> Setup STO> Shipping data for plants.
Assign the delivering plant's salea area also here. So you need to create a customer in 7245 and assigne it in 7246.
Create the vendor in the purchase organisation of the receiving plant and assgin the delivering plant in the vendor master. Maintain the document types correctly and define whether you require one step or two step procedure.
hope this will help.
Prase -
i dont know whats wrong with my n900.... a couple of weeks before i tried to install nitroid gingerbread on my n900.... i did exactly what it said it was almost complete but the last step didnt complete so i left it like that..... i was using my mobile fine until one day i restarted my phone... when it started it showed me 2 options (dont remember what the options were) although the 2nd one was power kernel something like that.... i chose 1st option after that it turned off when i startit again only nokia logo comes and it turns off by himself.... i thinki bricked my fone... but y didnt it happen when i was trying to install nitroid... plz help any way to fix it....
P.S. I cant flash it either.. it doesnt go to usb mode anymore neither does it charge....
Solved!
Go to Solution.you could try to do the commands in flasher, connect the device while it is off and holding the U button down and see if the flasher will see it.
-
Ora - 00600 error plz help urgent
hello all sir plz. help would should i do.
by mistake i made changes in spfile file.... after that i got this error
any solution ?
plz. help sir
SQL> create pfile from spfile;
create pfile from spfile
ERROR at line 1:
ORA-00600: internal error code, arguments: [733], [538970164], [pga heap], [],
help sir
waiting for replyfirst of all
thanx for my reply
sir i have bkp through rman but when i am connect to rman it give me error
2. i have no pfile<sid>.ora file
3. i try to start my database through pfile text file i got error..
plz. reply sir what should i do.....
how can i connect rman....
C:\>set oracle_sid=db01
C:\>rman target sys/oracle@db01
Recovery Manager: Release 10.1.0.2.0 - Production
Copyright (c) 1995, 2004, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
C:\>
again thanx.
i have full database bkp through rman. -
Hi,
I want to see Purchase order wise report. The report should show PO wise payment in FI.
PO field is EBLEN and i am unable to find its link to BSIK or BSAK. The reason is that they are not maintaining EBELN in both these table. I tried on LIFNR but LIFNR is for Vendor only and the requirement is for EBELN means in PO.
Please anyone help me out in this regard and also plz tell me any detail tables hierarchy of all modules.
Thanks in advance too all the people and gurus.
Usman MalikHi,
Check the table BSEG for PO.
Regards,
Sridevi
<i>* Pls. assign points, if useful</i> -
Hello Forum,
I am a newbee to Solaris 10. I have set up a ftp server on Windows.Now I have Solaris installed through VMware On the same Windows on which I have ftp server. I added
192.168.1.5 win2k
in my /etc/hosts file on Solaris 10.
Now when I do
# ftp win2k It says Network unreachable.
Please give me Step by Step details on how I can acess my windows through Solaris. I am really on deadline in here.
Please help me.
Step by step method of setting ftp so that I can acess windows .
Cheers
SomilDon't rely on /etc/hosts for remote adresses; I strongly recommend setting up a DNS-server/service.
Programs linked with libresolve ignores /etc/nsswitch.conf /etc/hosts and resolves directly as configured in /etc/resolve.conf.
I suggest checking out:
# PATH=/usr/sbin:$PATH;export PATH
# ping -s -n 192.168.1.5
# ping -s -n win2k
# traceroute -I 192.168.1.5
# telnet 192.168.1.5 21
# ftp 192.168.1.5
# dig win2k
# dig -x 192.168.1.5
# ifconfig -a
# netstat -nrv
# route get 192.168.1.5
# snoop -r 192.168.1.5
# man ping ftp telnet dig ifconfig netstat route snoop nsswitch.conf resolve.conf ... -
Guys Plz help urgent Phone memory is 0
i recievd a song from bluetooth and it has been saved but it reduced phone memory i tried to fing that song inthe phone memory but not found in phone memory plz tell me the locations so i can transfer to mass memory or bluetooth and can u plz tell me how to change the path of recieving anything means i received from bluetooth i want that it should be go to directly to massmemory folder .
OR
any one can tell me how to transfer the song from phone memory to mass memory
Solved!
Go to Solution.1) For your phone memory to be 0 you must have apps and everything stored there on C: and not utilising the mass storage E:.
I agree with matt_t that is how it is done when using bluetooth so havent a clue whats going on there.
2) Have you tried plugging your phone into your PC via USB and exploring your N97 throught my computer if using windows and double clicking the N97 icon.
Looking for the C: Phone folder and finding the song and dragging and dropping into E:mass memory music folder????
OR drag from your C: to your PC and dragging back to E:mass memory Music Foler if the above doesnt work.
BUT 1 song is usually on around 3MB so you still have issues with 0 memory.
3) If all your apps are stored on C: why dont you uninstall them and install onto your E:mass memory.
4) Internet i havent a clue about but with your memory so so low thats the least of your problems at the moment.
Thats all i have to help with i hope you find your song and your memory increases.
Message Edited by matto73 on 17-Oct-2009 05:45 PM
Nokia N97 Unbranded RM-505 [0585162]
Firmware 21.0.045
It's NOT about the Kudos they just make my day, hit the Star if I Helped. -
How to unlock my sap user account sapuser..plz help me out
Hello,
I am a newbie to sap bw.I am practising sap bw with sap r/3.My user login account got locked becoz of password error.Now i know the correct password for the user sapuser.please advice me how can i relogin to my my sap bw.
"It says user sapuser is locked.contact the person responsibe".please help me out to login again into the sap bw with the same username sapuser in sap bw and 800 as client.
With thanks..
ArunIf you try to login more than 3 times, server locks your user id and password. Most of the client use same concept and I believe your id is locked. The only way you can login is, contact your server administrator /basis guy to re-set your password and to give you new password.
sap* and password PASS is used for basis personel only. You should not have authorization to use sap*.
So contact your admin/basis guy asap to get a new password.
assign points if it helps..
Maybe you are looking for
-
Okay, I've lloked at seom of the forum post, but could not find an answer. Here's my dilemna. We have a full license of Acrobat 9 Pro. When using Word, I try to embed a video via the Embed Video option in the Acrobat tab. However, that option is
-
Issue fetching workitem recipients
I am trying get a list of recipients for a work item (task is of type general task) using the FM SAP_WAPI_WORKITEM_RECIPIENTS. The user to which this workitem id forwarded to has a position maintained in an organizational structure as well. Now, the
-
I am trying to bring and XML to FCPX. Its originally from Premiere, I brought it into FCP7 and create an XML but it messes with FCPX. I have learned that I can bring the xml into FCP7, then EDL it out of FCP7 then back into FCP7 and the video all wor
-
I cracked my Zen Micro earphones!
On creative's shop I don't see anywhere I can purchase the creative earbuds that came with my purchase of the micro Is it really true I can't get this headset/earbud set by itself? and if that's true what sort of headset <EM>should</EM> I buy now tha
-
Script to remove ICC profile in batch
Hi I have about 600 illustrator AI files (done in CS4) that re essentially black and white line drawings. But they are around 3-4meg each in size. Recent use of the tools has highlighted that there is a lot of unused data in these files of which the