SAP SCM 7.0 and ERP 6.00 integration.

Hi,
We should implement SCM-APO scenario using Sap SCM 7.0. The business process will be Demand Planning & Forecasting and Supply Network Planning. We need to connect the new SCM to ERP 6.0 (Sap Basis, ABA, AP 7.0 )
Which are the requirements about ERP 6.00 ? Is it need to install the EHP 4 on ERP 6.0 or no ?
I found on Sap Markeplace a .pdf about the architecture of SCM 7.0 but the integration with Sap ERP is not quite clear.
thank's for your help.
Antonino Chirico

Hi Antonio,
We also plan to install an SCM in 1 customer landscape.
According to SCM security guide SCM should be connected in secure way to ERP.
do you plan to establish secure communication between the 2 components?
BTW:
we do not plan to use PI in such scenario.In our case there is no real value in such recommendation.
Ciao
Giammaria Pace

Similar Messages

Is SAP SCM 5.1 and SCM 2007 are same? Please Confirm

Hi,
I have to Install SAP SCM 5.1 Non-Unicode System, but I cant find Installation Media at Marketplace instead I can find SCM 2007. I am able to get SCM 5.1 SPs when I clicked SCM 2007 entry on Marketplace. So please confirm whether these 2 products are same or not?
If yes, Please provide a link/ note that shows SCM 5.1 has renamed to SCM 2007 from SAP.
Thanks.

Hi Ajay,
SCM 5.1 & 2007 are the same.
Please follow the link
https://websmp110.sap-ag.de/support
under Release & upgrade info > installation & upgrade guides
Regards
R. Senthil Mareeswaran.

SAP SCM Authorizations

Hi,
I am looking SAP SCM Security tcodes and tables that are used on daily basis like in R/3 ECC SU01,SU10,SE10,SU01,PFCG,SU24,SE16,SE11,SE38,su21,su20 etc.
thanks

Hi Jain,
I highly recommend you to read this nice guide if you haven't read yet:
http://www.sdn.sap.com/irj/bpx/go/portal/prtroot/docs/library/uuid/80c094de-90aa-2910-02b8-e31a6f5ff0c2
In this guide you'll be able to find definition of roles and responsibilities when implementing GRC. You'll understand that Auditors should take a GRC course also; GRC it's a tool that involves a lot of areas. If you've been working with SAP authorizations so far, you won't have problems understanding GRC, you should read the corresponding guides and you'll be able to "map" your company requirements via system configuration.
Cheers,
Diego.

Integrating SAP-ERP system to SAP-SCM system via SAP-XI

Hi All,
My requirement is to make a scenario for Integrating SAP-ERP system to SAP-SCM system via SAP-XI,Sender side is IDOC Adapter and Receiver side is Proxy.As iam not aware of the scenario procedure can any body could explain briefly step-by-step on this.
Thanks in Advance.
ram

Hi,
Sender is IDOC so no need to take any communication channel & sender agreement in ID window.
Find below link of more information on IDOC configuration
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Troubleshooting File-to-IDOC Scenario in XI.
Convert any flat file to any Idoc-Java Mapping
IDOCs (Multiple Types) Collection in BPM
Outbound Idoc's - Work around using "Party"?
Troubleshooting File-to-IDOC Scenario in XI.
Proxy Configuration
File to R/3 via ABAP Proxy

IDOC to XML and send it to SAP SCM SNC(Supplier network colloboration)

I am currently working in a project which I need to send the PO IDOC to PI (which is working fine) and convert it to xml and send it to SNC system which is SAP SCM system. I am not sure if this is going to be an IDOC or xml , I wasn't given more information as all of us are new to this SNC environment. Any help would highly appreciated.
Thanks,
Menaga

Following are the interface mappings in use for the Purchase Order scenario from ERP to SNC
1. create purchase order -> display PO (ERP to SNC)
OrdersOrders05_ReplenishmentOrderNotification_01
2. Create or change PO -> Display updated PO (ERP to SNC)
OrdchgOrders05_ReplenishmentOrderNotification_01
3. Confirm PO or change in web UI (SNC to ERP)
ReplenishmentOrderConfirmation_OrdrspOrders05_01
4. Create or Change Purchase Order -> Receive and Display Purchase Order (ERP to SNC)
OrdntfOrdint01_ReplenishmentOrderNotification_01
Just configure the Integration scenario "MaintainPurchase_Order_Processing" from http://sap.com/xi/SNC/Global namespace present in SNC 5.1 SWC
in your ID.
In SNC Scenarios Idocs will be sent and received from ERP and ABAP Proxies (Client/ Server) used at SNC side. You do not have to code for the ABAP Proxies as the proxies will already be inmplemented in your SNC system.
So 1. configure your SNC system for ABAP Proxy configuration
2. Configure the Integration scenario "MaintainPurchase_Order_Processing" in ID
3. Configure your ERP system for IDoc send/ receive
You are done.

SAP SCM and SAP APO: Best practices, tips and recommendations

Hi,
I have been gathering useful information about SAP SCM and SAP APO (e.g., advanced supply chain planning, master data and transaction data for advanced planning, demand planning, cross-plant planning, production planning and detailed scheduling, deployment, global available-to-promise (global ATP), CIF (core interface), SAP APO DP planning tools (macros, statistical forecasting, lifecycle planning, data realignment, data upload into the planning area, mass processing u2013 background jobs, process chains, aggregation and disaggregation), and PP/DS heuristics for production planning).
I am especially interested about best practices, tips and recommendations for using and developing SAP SCM and SAP APO. For example, [CIF Tips and Tricks Version 3.1.1|https://service.sap.com/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006480652001E] and [CIF Tips and Tricks Version 4.0|https://service.sap.com/form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000596412005E] contain pretty useful knowledge about CIF.
If you know any useful best practices, tips and recommendations for using and developing SAP SCM and SAP APO, I would appreciate if you could share those assets with me.
Thanks in advance of your help.
Regards,
Jarmo Tuominen

Hi Jarmo,
Apart from what DB has suggested. you should give a good reading on the following.
-Consulting Notes (use the application component filters in search notes)
-Collective Notes (similar to the one above)
-Release Notes
-Release Restrictions
-If $$ permit subscribe to www.scmexpertonline.com. Good perspective on concepts around SAP SCM.
-There are a couple of blogs (e.g. www.apolemia.com) .. but all lack breadth.. some topics in depth.
-"Articles" section on this site (not all are classified well.. see in ECCops, mfg, SCM, Logistics etc)
-Serivce.sap.com- check the solution details overview in knowledge exchange tab. There are product presentations and collaterals for every release. Good breadth but no depth.
-Building Blocks - available for all application areas. This is limited to vanilla configuration of just making a process work and nothing more than that.
-Get the book "Sales and Operations Planning with SAP APO" by SAP Press. Its got plenty of easy to follow stuff, good perspective and lots of screen shots to make life easier.
-help.sap.com the last thing that most refer after all "handy" options (incl. this forum) are exhausted. Nevertheless, this is the superset of all "secondary" documents. But the maze of hyperlinks that start at APO might lead you to something like xml schema.
Key Tip: Appreciate that SAP SCM is largely driven by connected execution systems (SAP ECC/ERP). So the best place to start with should be a good overview of ERP OPS solution overview, at least at the significant level of depth.). Check this document at sdn wiki "ERP ops architecture overview".
I have some good collection of documents though many i havent read myself. If you need them let me know.
Regards,
Loknath

How to use ADS on SolMan instance and SAP standard PDF forms from ERP

Hi there
We have installed and configurated the ADS service on our Solution Manager (SolMan) Instance called SD1.
SolMan Info: SAP Solution Manager 7.0; Stack 17; Java-Stack installed; SAP Netweaver 7.0
All ADS test reports can be executed successfully:
FP_TEST_00
FP_PDF_TEST_00
We have linked our ERP landscape (e.g. system ED1) to ADS service running on SolMan.
ERP Info: ECC 6.0; Stack 13; no Java-Stack installed
All ADS test reports can be executed successfully:
FP_TEST_00
FP_PDF_TEST_00
We want to print PDF documents from SAP standard applications on our ERP landscape. Therefore we want to use standard PDF forms provided by SAP and also available in transaction SFP (e.g. form ISSR_NW670_RX_PDF).
Problem: When we try to create a PDF document from the application we get an error message:
Processing exception during a "Render" operation.#Request start time: Mon Feb 02 13:42:08 CET 2009#com.adobe.ProcessingException: Problem accessing data from Destination: dest:FP_ICF_DATA_ED1//sap/bc/fp/form/layout/ISSR_NW605_PDF.XDP?fp-language=DE&fp-cac
I have also checked the trace (see below) and it seems that the system tries to get the form from the SolMan system and not from the ERP system. But the form is only installed on ERP system.
Are there any ideas how to solve this problem?
Thanks.
   Begin trace
   Adobe Document Services Mon Feb 02 14:30:15 CET 2009 Trace Results:
   Request initialization (including DOM construction and validation) processing elapsed time = 0 ms.
   Begin operation: Render, elapsed time = 0 ms.
         Gather input streams and options processing, elapsed time = 13 ms.
         Form template and form license processing elapsed time = 13 ms.
Problem accessing data from Destination: dest:FP_ICF_DATA_ED1//sap/bc/fp/form/layout/ISSR_NW670_RX_PDF.XDP?fp-language=DE&fp-cacheinfo=2006-06-26T13%3a10%3a38Z%2406c26758-d4b6-4818-8928-bbed36a10089%240%24de%24v0%2e9
com.adobe.ads.destination.DestinationException: File Not Found while reading Dest URL: http://:/sap/bc/fp/form/layout/ISSR_NW670_RX_PDF.XDP?fp-language=DE
Fehler bei der Formularprozessierung (Workbench)
Exception Stack Trace:
com.adobe.ads.destination.DestinationException: File Not Found while reading Dest URL: http://:/sap/bc/fp/form/layout/ISSR_NW670_RX_PDF.XDP?fp-language=DE
Fehler bei der Formularprozessierung (Workbench)
at com.adobe.ads.destination.Destination.readUrlStream(Unknown Source)
at com.adobe.ads.destination.Destination.readTemplate(Unknown Source)
at com.adobe.ads.data.DestStreamData.getByteArray(Unknown Source)
at com.adobe.ads.data.StreamData.getData(Unknown Source)
at com.adobe.ads.data.StreamData.getRemoteData(Unknown Source)
at com.adobe.ads.operation.support.RemoteRenderer.renderAll(Unknown Source)
at com.adobe.ads.operation.support.RemoteRenderer.renderAll(Unknown Source)
at com.adobe.ads.operation.Render.renderWithoutCache(Unknown Source)
at com.adobe.ads.operation.Render.execute(Unknown Source)
at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
at com.adobe.ads.request.Request.processOperations(Unknown Source)
at com.adobe.ads.request.Request.process(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
at SoapServlet.doPost(SoapServlet.java:51)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
End operation: Render, elapsed time = 44 ms.
Begin operation: Render Log, elapsed time = 44 ms.
Completed Merge. elapsed time = 72 ms.
End operation: Render Log, elapsed time = 77 ms.
Problem accessing data from Destination: dest:FP_ICF_DATA_ED1//sap/bc/fp/form/layout/ISSR_NW670_RX_PDF.XDP?fp-language=DE&fp-cacheinfo=2006-06-26T13%3a10%3a38Z%2406c26758-d4b6-4818-8928-bbed36a10089%240%24de%24v0%2e9
com.adobe.ads.destination.DestinationException: File Not Found while reading Dest URL: http://:/sap/bc/fp/form/layout/ISSR_NW670_RX_PDF.XDP?fp-language=DE
Fehler bei der Formularprozessierung (Workbench)
Exception Stack Trace:
com.adobe.ads.destination.DestinationException: File Not Found while reading Dest URL: http://:/sap/bc/fp/form/layout/ISSR_NW670_RX_PDF.XDP?fp-language=DE
   Fehler bei der Formularprozessierung (Workbench)
        at com.adobe.ads.destination.Destination.readUrlStream(Unknown Source)
        at com.adobe.ads.destination.Destination.readTemplate(Unknown Source)
        at com.adobe.ads.data.DestStreamData.getByteArray(Unknown Source)
        at com.adobe.ads.data.StreamData.getData(Unknown Source)
        at com.adobe.ads.data.StreamData.getFileDataBuffer(Unknown Source)
        at com.adobe.ads.remote.EJB_PDFAgent.addAttachments(Unknown Source)
        at com.adobe.ads.remote.EJB_PDFAgent.embedFiles(Unknown Source)
        at com.adobe.ads.operation.support.RenderErrorLog.embedCollateralFiles(Unknown Source)
        at com.adobe.ads.operation.support.RenderErrorLog.embedRenderCollateral(Unknown Source)
        at com.adobe.ads.operation.Render.handleRenderException(Unknown Source)
        at com.adobe.ads.operation.Render.execute(Unknown Source)
        at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
        at com.adobe.ads.request.Request.processOperations(Unknown Source)
        at com.adobe.ads.request.Request.process(Unknown Source)
        at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
        at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
        at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
        at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
        at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
        at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
        at SoapServlet.doPost(SoapServlet.java:51)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(AccessController.java:215)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
   Encountered a problem embedding Render collateral:
   PDFException getting file from PDF Document.
   Error Log written to server: /usr/sap/SD1/SYS/global//AdobeDocumentServices/renderErrorLog/errorFiles/2009.02.02.143015SAFPCP00RES.pdf
   Error Log file "2009.02.02.143015SAFPCP00RES.pdf" written to /usr/sap/SD1/SYS/global//AdobeDocumentServices/renderErrorLog/errorFiles
Processing exception during a "Render" operation.
   Request start time: Mon Feb 02 14:30:15 CET 2009
com.adobe.ProcessingException: Problem accessing data from Destination: dest:FP_ICF_DATA_ED1//sap/bc/fp/form/layout/ISSR_NW670_RX_PDF.XDP?fp-language=DE&fp-cacheinfo=2006-06-26T13%3a10%3a38Z%2406c26758-d4b6-4818-8928-bbed36a10089%240%24de%24v0%2e9; [Error Log file "2009.02.02.143015SAFPCP00RES.pdf" written to /usr/sap/SD1/SYS/global//AdobeDocumentServices/renderErrorLog/errorFiles]
   Exception Stack Trace:
   com.adobe.ProcessingException: Problem accessing data from Destination: dest:FP_ICF_DATA_ED1//sap/bc/fp/form/layout/ISSR_NW670_RX_PDF.XDP?fp-language=DE&fp-cacheinfo=2006-06-26T13%3a10%3a38Z%2406c26758-d4b6-4818-8928-bbed36a10089%240%24de%24v0%2e9; [Error Log file "2009.02.02.143015SAFPCP00RES.pdf" written to /usr/sap/SD1/SYS/global//AdobeDocumentServices/renderErrorLog/errorFiles]
        at com.adobe.ads.operation.Render.execute(Unknown Source)
        at com.adobe.ads.operation.ADSOperation.doWork(Unknown Source)
        at com.adobe.ads.request.Request.processOperations(Unknown Source)
        at com.adobe.ads.request.Request.process(Unknown Source)
        at com.adobe.AdobeDocumentServicesEJB.processRequest(Unknown Source)
        at com.adobe.AdobeDocumentServicesEJB.rpData(Unknown Source)
        at com.adobe.AdobeDocumentServicesLocalLocalObjectImpl0_0.rpData(AdobeDocumentServicesLocalLocalObjectImpl0_0.java:120)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
        at java.lang.reflect.Method.invoke(Method.java:391)
        at com.sap.engine.services.webservices.runtime.EJBImplementationContainer.invokeMethod(EJBImplementationContainer.java:126)
        at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:157)
        at com.sap.engine.services.webservices.runtime.RuntimeProcessor.process(RuntimeProcessor.java:79)
        at com.sap.engine.services.webservices.runtime.servlet.ServletDispatcherImpl.doPost(ServletDispatcherImpl.java:92)
        at SoapServlet.doPost(SoapServlet.java:51)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
        at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
        at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
        at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
        at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
        at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
        at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
        at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
        at java.security.AccessController.doPrivileged(AccessController.java:215)
        at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
        at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
   End trace, total elapsed time = 121 ms.
Edited by: Sören Reiche on Feb 4, 2009 7:49 AM

Hi there
Our problem is solved. We had a problem with our ADS user passwords.
Thanks.

Difference in SAP R/3 Financials and MY SAP ERP Financials

Hi ALL,
Can any one tell me the difference in SAP R/3 Financial and MY SAP ERP Financial
Thank and Regards
Kedar

My SAP ERP provides additional analytics such as financial analytics, workforce analytics and operations analytics. We get employee life cycle management and employee relationship management and there's a financial supply chain component.
The NetWeaver piece gives you portal capabilities and better integration capabilities for integrating applications with applications from other vendors.
Check out the solution overview in this link.
http://download.sap.com/download.epd?context=34A481C8164156DEF6E507D82889F9F5D8D8F5BC953285A76585EA32C01E3F8A402BF4874B54DC389CD1EB0DCC5C469451499E974252ABDD
Reg,
Arun

SAP ECC 6.0 and mySAP ERP

Hello Gurus,
Could somebody tell me the difference between SAP ECC 6.0 and mySAP ERP
Thanks and reward guaranteed

Hi,
These are versions of SAP.
you can findout the differences between these two versions from the following link
http://solutionbrowser.erp.sap.fmpmedia.com/
Regards
Ali

Client concept for SAP SCM APO and SAP TM

Hello,
We are installing SAP SCM APO 5.1 (SNP, gATP, DP) and SAP TM 7.0 (ramp up). Both connect via CIF to ECC 6.0 SP3. As far as my knowledge goes for CIF, both master data and transactional data is exchanged via CIF.
In ECC we have a three client concept:
100 customizing only
200 customizing + master data (golden client)
300 customizing + master data + transaction data
Can we use a similar model for TM and SCM APO as well? Should we then only connect ECC-300 to TM-300 and ECC300 to SCM-300 via CIF?
I have also heard that also some ECC customizing is transferred via CIF to SCM/TM. Is that true and does that change this model?
Regards,
Rob Veenman
SAP Basis.

Rob,
As a general rule of thumb, for each ECC client you will probably want an SCM client. From your landscape description, it is not clear to me in which clients you perform the everyday functions of development/test/production, but I guess you have already worked that out. Without knowing exactly how you manage your environment, I will say that it is probably a good idea to have active CIF connections between each of the three pairs of clients. Once you have set up a single connection between your first pair (ECC/SCM), you will find that setting up the second and third is pretty trivial.
Yes, quite a bit of ATP configuration can be CIFd across. Typically, you do this one time, and then lock the transfer of config out (there is a config setting in SCM to stop further transfer of config). From that point forward, any config that must be parallelled in both systems is usually done manually in both systems. Notable exceptions are Factory Calendars, units of measure, and Fiscal Periods, which can be pulled across from ECC to SCM any time you want via standard program.
Regards,
DB49

Data exchange between SAP SCM and an external java tool via JCo

Hi everybody,
the situation i am in is the following:
We are developping a java application for production planning using multi-agent systems. What I am currently working on is an integration concept towards SAP via JCo. I am using a SAP SCM System.
What i got is the following:
I got the JCo connection to SCM and I am able to execute BAPIs from Java.
Now my problem is the following:
We want to recognize a change in the SCM System, e.g. when someone added a new manufacturing order. What do I have to do for that?
Do I have to register a JCO.Server as a RFC Destination?
Do I have to use SCM EventManagement to handle the corresponding events?
In Java terms, what I want is a EventListener for some events - but neither do I know how the events are created nor how they are transferred to third party systems...
Anyone with a hint?
Thanks a lot!
Greetings
Jan

Hi Jan,
architecturally you will need to determine a point in the SCM application logic to understand that a relevant event has occurred and then issue a notification "message" - in your case it sounds like your system is directly coupled so it wouldn't exactly be a message but an RFC call instead.
On SCM itself all you need is the RFC-enabled function module interface (an ABAP development), a logical destination and a hook somewhere in the application logic to make the RFC call.
From a JCo perspective you then just have to implement an "RFC server" that responds to these RFC calls.
Most difficult part will be to find a suitable hook in the SCM application logic that doesn't modify any delivered SAP code but uses an enhancement technique like a BADI.
Anything you can share about your planned development? Is this specifically for a customer or are you planning on releasing a product?
Regards, Harry.

CIF integration with APO and ERP

Dear Experts,
We have a requirement of setting up a links between SCM 7.0 (APO) system and an ERP 6.4 system in order to use Core Interface (CIF).
Appreciate if you could kindly guide me as to how we should do the initial Basis configuration activities to enable this CIF integration.
Is there a way that I can get hold of a link with the step-by-step instructions for the initial CIF configurations from the Basis point of view ?
Thanks a lot in advance.
Thanks and Regards
Kushan

Hello Kushan,
please review the documents at SAP links:
service.sap.com/scm -> Best Practices for Solution Operations <on the right > -> "Manage APO Core Interface in SAP APO (3.x) / SAP SCM (4.x, 5.x)" < ID 030 >
service.sap.com/scm -> Technology <on the left > -> "Integration overview"
Regards, Natalia Khlopina

Difference between SAP R/3 , ECC and MySAP

Hi,
I would like to know the difference between SAP R/3 ,ECC and MySAP. Please let me know the difference , the links earlier found were not getting into my brains.
To my understanding the SAP R/3 4.5b,4.6c - earlier versions contains the basic modules like Logistics(MM,SD) and PP (core functional modules), on technical point the little function modules were obsolete in these version.
4.7 (included the Web application server,for web based and integrating with XI,Enterprise core ,Enterprise Extensions ) + core functional modules +.HR + FI/CO+ SCM (MM,WM,PP) + PLM
ECC (Enterprise Core Component) - ?
MySAP - ?
Correct me and also your answer will help me understand better.
Regards
Shawn

ECC 6.0 means it is an latest version of SAP ERP package (ERP Central components). it will support for netweaver and BW.
Chk this links for more details.
ECC 6.0 clarification
Replacement for CONVERT_DATE_INPUT in ECC 6.0
Upgrade from sap 4.7 to ECC 6.0
Upgradation to ERP 6.0 '2005'
Differences between 4.6C and 4.7 EE
To know the functionality changes you can refer:
http://solutionbrowser.erp.sap.fmpmedia.com/
http://www.sap.com/solutions/business-suite/erp/pdf/BWP_ERP2006_Upgrade.pdf
http://service.sap.com/releasenotes
http://service.sap.com/upgrade
Rewards if useful.

What is the difference between SAP NW PI7.1 and PI7.1 EHP1

We have a customer using SAP PI7.1 EHP1. The application to be deployed
isdeveloped on SAP Netweaver PI 7.1 SP06.
We need to know if application developed and transported from PI7.1 is
compatible with EHP1?
Below are the Components used by the application .
1) SSL communication using SOAP adapter
2) Java mapping , Graphical mapping , XSLT mapping
3) Customised EJB modules
4) Adapter framework
5) ALE layer for IDoc communication from ERP to PI
6) RFC lookups to PI system and ERP system.
Questions
1)Will PI EHP1 be able to communicate with PI7.1 using SOAP adapter ?
2) What is the difference between SAP NW PI7.1 and PI7.1 EHP1 ?
Regards,
Sneha

Hi,
EHP Pi7.1 new
IPv6 Support in SAP Systems (new)
Async/Sync and Sync/Async Bridge in the JMS Adapter (New)
High Availability (New) Locate the document in its SAP Library structure
Use
A new concept is available for setting up a high availability environment for SAP NetWeaver Process Integration (PI). To do this, you need SAP Web Dispatcher for load balancing, and you must reconfigure your HTTP, RFC, and RMI connections so that they can be used for load balancing. You must also make various configuration steps in other components of your PI environment.
[Level 4: Document: XML to Text Conversion Module (New)] XML to Text Conversion Module (New)
Message Packaging (New)
Monitoring Milestones (New) Locate the document in its SAP Library structure
Use
You can use the new scenario variant Monitoring Milestones of the Business Process Management scenario to define a monitoring process that can monitor events from different applications. A monitoring process can subscribe to events from SAP or non-SAP systems.
check given Link
http://help.sap.com/saphelp_nwpi711/helpdata/en/61/8c3842bb58f83ae10000000a1550b0/frameset.htm
Regards,
Amit

What is the difference between SCM, R/3 and BIW servers?

Hi all,
What is the difference R/3 and SCM and BIW.
I have clear idea on R/3 and BIW .
R/3 system used for short term data.
BIW used for Historical data and process of planning.
I do not know about SCM.
In which cases will we use SCM?
Thanks in Advance,
Bhaskar
Edited by: Wilian Segatto on Jan 14, 2010 7:39 PM

Dear Bhaskar,
Administrator Workbench is inbuilt in SAP SCM.
SAP Advanced Planning and Optimization (SAP APO) offers a fully integrated pallet of functions that you use to plan and execute your supply chain processes. SAP APO supports the following:
·        Business collaboration on a strategic, tactical, and operational planning level
·        Co-operation between partners at all stages of the supply chain process; from order receipt, stock monitoring, through final shipping of the product
·        Cultivation of customer and business partner relationships
·        Constant optimization and evaluation of the supply chain networks efficiency
ICH offers collaboration between customers and suppliers.
Regards,
Naveen.

SAP SCM 7.0 and ERP 6.00 integration.

Similar Messages

Maybe you are looking for