SAP SCM F&R , not all the steps of dispatcher profile are executed.
Hi,
We are currently using SCM F&R 5.0 and facing issues when we try to process the location.
Of the 13 steps of dispatcher profile, (details given below), first four show the status as OK and fifth one "errors" out. Rest of them have status as "Initial".
To process the location, we are using the report - /FRE/UI_FRP_PROCESS_LOCATION.
Do let me know if anyone has come across this issue, any input would be appreciated.
Also do advice, where we can see the detail log. As in location status, it only display the status ,ie, "Error", Initial" , "OK".
Details of the steps are as mentioned below:
Sequence 1 -- collect information data for the F&R Processor (MN_AND_TECH_SYNC)
task 1 -- create location data (CREATE_LOCATION_ENVIRONMENT)
task 2 -- provide data for F&R processor on demand (CREATE_OUTBOUND_FILES_ON_DEM)
task 3 -- provide master data for F&R processor (CRETAE_OUTB_FILES_NO_CRIT_MD)
task 4 -- provide configuration data for F&R processor (CHECK_FOR_UPDATES)
task 5 -- check configuration data (SAFRUN_NOCRIT)
Sequence 2 -- read transactional data (TD_DATA_SYNCH)
task 1 -- provide open orders and goods receipts for F&R processor (CREATE_OUTB_FILES_NO_CROT_TD)
Sequence 3 -- start the F&R processor (AUOT_REPL_AND_OPRM)
task 1 -- provide stock and consumption data (CREATE_OUTBOUND_FILES_CRIT)
task 2 -- calculate forecast and requirements (SAFRUN_CRIT)
task 3 -- perform post-processing of forecast and requirements calculation, such as DIF data (SET_DIF_DELTA)
task 4 -- reset location environment (RESET_LOCATION_ENVIRONMENT)
task 5 -- create of order proposals (CREATE_AND_RELEASE_OPS)
Sequence 4 -- prepare results for replenishment workbench (FC_AND_MD_SYNC)
task 1 -- prepare results for replenishment workbench (READ_FILES_FOR_RWB)
Sequence 5 -- prepare results for analytics
task 1 -- prepare results for analytics (NON_EXC_ANA)
Currently first four steps in the dispatcher profile is successfully executed, fifth one ends up in error and rest remain in the "initial" status.
Thanks
Sharad
Hi,
I logged in the forum after long time. We had lot of issues in running dispatcher and all of them we could resolve.
Since its been long time, I am not sure if you are still looking for answer.
If you could let me know any specific issue you are having, I will try to answer that.
Thanks
Sharad
Similar Messages
-
Not all the photos from my iPad are uploaded to My Photo Stream.
Does Photo Stream have some algorithm to recognize similar photos and upload only one of them?
I have like 700 photos in my iPad Photo Stream. But only half of them are uploaded to My Photo Stream folder on my PC. Why?
I noticed that similar photos are not uploaded. Maybe there is some algorithm?
How can I fix this?
I must add that photos aren't older than 30 days, and Photo Streams was on from the beggining.Good morning
I can't create this issue on my devices but appears that others have had this problem - often during times of poor wifi reception it seems. I did find this solution of powering off and then they came through for this op.
Cheers -
When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings -
I can't sync my ipod to itunes. It goes through all the steps to sync but it does not sync. The music I moved around does not go where I put it. It shows up in itunes (when changing music around) but does not change it on my ipod. Can someone help me?
Sync Session Failed to Start iTouch iOS5: Apple Support Communities
iphone could not be synced sync session failed to start...: Apple Support Communities
and
Can't connect to the iTunes Store -
When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.
Hi pissedadobeuser,
Does this issue occur with any particular web page?
Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
Which Browser version, OS version and Acrobat version are you using?
Regards,
Rave -
After updating iTunes this week Windows 8 recognizes the iPod but does not offer an option to open with iTunes. iTunes does not recognize iPod Touch. Have followed all the steps but without success. Is there a solution with iTunes?
I followed all the instructions on the suggested page. Many files in C:\Program Files\Common Files\Apple\ and C:\Program Files (x86)\Common Files\Apple\ could not be deleted. Message said ""Cannot delete files: It is being used by another person or program"' but could not find iPodService.exe in task manager (also, the "Cannont delete ... " did not mention iPodService.exe).
Deleted all that I could. Reinstalled iTunes. Still same result. iTunes and computer both recognize my old iPod. Only the computer recognizes iPod Touch. -
my ipod 7th generation is not recognised by itunes and my computer. I am not able to transfer any songs. Please help me on this regard. I tried all the steps from apple website
This article should give you the options
https://discussions.apple.com/docs/DOC-3991 -
I have tried all the steps as suggested by the community partners i.e. uninstall/reinstall itunes (number of times). If I plug my ipad 2 on my office PC which has itunes, it is recognised immediately. My lap top does not show 'NEW HARDWARE FOUND" as iPad. It just says new hardware found and shows scanner and camera hardware recognised. In my opinion there could be programme file which is having conflict with ipad 2 recognisation. I am surprised to find that APPLE has not yet come out with straightforward steps for stting up procedures to avoid this recognition issue. It is waste of time and causing lot of aggravation among iPad 2 purchasers.
Sounds like it could be your computer and not Apple. Sounds like some registry issues and/or other underlying problems.
What are your computer specs? Year? Manufacturer? RAM? Processor (type & speed, # of cores), OS (32 bit? 64 bit? Professional? Standard?) -
Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it actually says not moblie network available, when everyone else in my family has coverage and are on my plan with iphones. I am missing text messages and dropping calls left and right. This is unacceptable for the cost of this phone and my service. I have did a hard reset etc. What else can I do??
Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps. -
keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipodI just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.
-
Iphoto will not open I am asked to check with developer that iphoto works with this version of OS x. I have Mountain Lion OS X I have followed all the steps recomended by T Devlin in a previous discussionand reinstalle ILife but to no avail
To reinstall iPhoto you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the:
HD/Library/Receipts folder (10.5 and earlier)
or from the /var/db/receipts/ folder (10.6) .
or from the /private/var/db/receipts folder (10.7 or later)
Then install iPhoto from the source it came from originally. -
I did all the steps in this article but I get the msg: "Movie Title" was not copied to the iPad because it cannot be played on this iPad. The moive never moves over.
Did you download Tron in HD? If so, try syncing the SD version that came with it
-
My iPhone 4 will not turn on. When I plug it into Itunes it says it is n recovery mode. I try to restore it and the error code code 3194. I have tried all the steps what now?
It is usually given as a communication error between Apple, iTunes (your computer), iPhone. Somewhere they are not communicating, so the iOS you are trying to install cannot be approved by Apple. Trouble shooting steps include, making sure you have Current iTunes installed, make sure your Hosts file of computer is not blocking Apple. Try restoring on another computer.
-
My mini ipod appears off and not respond to any commands when pressed the buttons to reset, apple logo appeared and then the apple support site and it shuts down. already tried all the steps, but none worked, and when I plug it into my computer it does not appear in the iTunes bar. what do I do?
If MacKeeper corrupted the Recovery partition then even I underestimated its potential for damage. Garbage "cleaning" apps will cause misery but I have not found that the Recovery partition to have been affected by using MacKeeper or anything like it. I doubt that it did so, but I have learned not to underestimate the potential for such things to result in system corruption.
Before concluding your Mac has a hardware failure, try booting OS X Internet Recovery by holding command option r on startup (three fingers). That will force your iMac to bypass the Recovery partition altogether, and convey the ability to create a new one.
An Internet connection will be required (wired or wireless).
At the Mac OS X Utilities screen, select Disk Utility. Select your startup volume (usually named "Macintosh HD") and click the Repair Disk button. Describe any errors it reports in red. If Disk Utility reports "The volume Macintosh HD appears to be OK" in green then you can be reasonably (though not completely) assured your hard disk is in good working order.
Assuming the HD remains usable you can then use Disk Utility to erase it. Reinstall OS X, restore your essential software and other files, and don't reinstall the junk. -
When I complete all the steps to create Apple ID.In part that requires the credit card i dont have credit card and the option none does not appear.What can I do?
Greetings anabeqiri,
Thank you for contributing to the Apple Support Communities.
The advice and steps in this article may help if you don't see "None" as a payment option when creating your Apple ID:
Why can’t I select None when I edit my Apple ID payment information? - Apple Support
All the best,
Jeremy
Maybe you are looking for
-
Green stripe appears on video after compressing
After running a Quicktime file through Compressor, I get a green stripe running horizontally across the center of the image. The stripe covers roughly a third of the screen vertically. Some background: The computer is a new 12 core, Mac Pro running S
-
Can any one help me. my Ipod touch will not respond when I plug it in to my new computer. My old computer crashed and I am using a new computer. When I plug it in or not it reads on screen a picture of a usb plug and a arrow pointing to a a simble
-
System Monitoring / Administration asking for logon id
Each time I click on, "System Monitoring / Administration" in DSWP, a dialog box pops up asking me for a username and password. I've tried using the local system admin password, SAP*, my own SAP logon id, the J2EE_ADMIN user, etc.. but the dialog box
-
Cisco Unified Real-Time Monitoring Tool Administration Guide
Hello Pros, I am in process of upgrading CUCM from 8.6 to 9.1.2 and receiving "not enough disk space on the partition" error. The show status from CLI shows 13499216K free space but I don't understand why we are getting the error message. I tried FTP
-
Adobe DNG Converter can't recognize any files
Hi All! I'm new here and would very much appreciate help. I am running a Mac OS X 10.04.11 and would like to open .CR2 files (native file from my Canon 500D) in PS4 / Bridge CS4. My problem is that although I have downloaded the Adobe DNG Con