SAP SCM & Portal Integration Documentation
Hi All,
I was wondering if anyone knew where documentation on how to integrate SCM & Portal together was? I've been looking for the past couple of days and have been unsuccessful in locating any kind of documentation.
I'm just looking for some information on how the two can be linked together. Basically how Portal can be used to access the SCM stack and what has to be done in order for this to happen.
Any information on this will be greatly appreciated. Thanks in advance.
-Victor
Hi Barry,
Both the links work for me. Can you please check if this issue for you is because of your login/authorization?
Regards,
Vasanth
Similar Messages
-
Urgent help on sap XI and SAP enterprise portal integration
Hello friends,
This is an urgent requirement for sap xi integration with sap enterprise portal so can anyone help me by providing some demo on the same.
Pls specify the components required in the scenario and steps required for configuring the setup.
Any documents are welcome.
My email id is [email protected]
Points will surely be distributed for any document related to above scenario.
Its urgent.................
Regards,
Ameet
Message was edited by:
Ameet JassaniHi,
In addition to the above post, check the following links...
http://help.sap.com/saphelp_nw04s/helpdata/en/70/0837ced133304eba452c45b6047c74/content.htm
/thread/143082 [original link is broken]
/thread/126493 [original link is broken]
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9974d3f7-0b01-0010-88ac-e4d9f15c9499
regards -
SAP Enterprise Portal Strategy Documentation
Hi,
I would like to get a template document to design the SAP Enterprise portal strategy. Is there a document which lists the areas to be considered while designing the Enterprise portal strategy? Are there any best practices which SAP suggests in this area ?
Regards,
AmitHi.
You may find the following links useful for you:
[Planning and Succeeding with Your SAP NetWeaver Portal Project|http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/903122e0-b3d4-2b10-c5b3-c19f5dd58072]
[Best Practices - Portal|http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/e0b46f8a-8fce-2b10-95a5-b72dd53a952b]
Best regards,
Aliaksandr -
About SAP BW 3.5 and SAP Enterprise Portal Integrating
I feature in the preview through BW webtemplate to preserve the iview feature, the system shows errors:
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Cannot retrieve system 'BWDCLNT100' from UME.
How to solve this problem?Hi,
Have you defined and tested concerned BI system??
Can you please elaborate how you went about creating this iview.
Hope you have done as described in following help pages
http://help.sap.com/saphelp_nw2004s/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm
regards,
Sudhir -
Integration of SAP enterprise portal with ATG dynamo platform
This is more an architectural question.
There is an existing web application running on the ATG 5.x/6.x B2C platform that takes orders from dealers for a retailer. It integrates with a SAP system using proprietary integration mechanisms. This is the existing architecture.
There is a idea to use the SAP netweaver platform, specifically the SAP enterprise portal that will integrate with the ATG dynamo platform.
ATG 6.2 and above allows integration in 2 ways :
1) Use web services
2) Integration framework using JMS/RPC etc
[Pl. see the ATG documentation www.atg.com/support]
I have been reading thru number of articles on SAP netweaver and looking for multiple options for the above integration.
My theoretical understanding is:
a) Develop a connector to the ATG platform using connector framework and invoke a web service on the ATG platform that expose the business logic built on the ATG platform
b) Does SAP XI come into picture if the portal tries to create a business process out of one single application.
c) Are there any other options?
I'm completely new to the SAP netweaver platform but have a good idea on SOA.
Any help or inputs on this will be highly appreciated.Hello,
I can give you a suggestion from the Connector framework point of view. We are currently developing a generic webservice connector which will enable to create content using CF, which will be sent as WS requests for function execution. The connector is planned to be released for New-York 7.1 Netweaver branch. For the mean time I can suggest, as you did, to develop your CF connector which will connect to ATG exposed WS.
Best Regards,
Ran -
Dear all,
I've created out BI system in our new Portal installation and tested the connection. Everything works fine. I added the certificate of the portal to STRUSTSSO2 in BI ABAP and assigned SAP_ALL and SAP_NEW to my Account.in BI. If I open the iView from the portal I get a BSP Exception with the message:
The used connection by the iView is to the ABAP-Stack of the BI-system not to the JAVA-Stack. Is that correct?
BSP Exception: Der Zugriff auf die URL /irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher;jsessionid=IDBYatWIpt_pX4uc52ChoZqMWkm1RAFW2qsA_SAP ist untersagt.
What can be the problem/reason?
Thanks!Hi Gerrit
In both places you have to provide a authorization access to the end users then only it will work. because your are already said that in SAP_All & SAP_New working fine
Back end BI system access as per the word document as pasted the link
https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&cad=rja&uact=8&ved=0CFIQFjAG&url=http%3A%2F%2Fbasisdsp.f…
For SAP portal you have to create iview's assign the same to end user
Assigning an Authentication Scheme to an iView - User Authentication and Single Sign-On - SAP Library
Portal Authentication Infrastructure - Configuring the Portal for Initial Use - SAP Library
BR
SS -
Integration of WEBI report in SAP Enterprise portal
Hi Colleagues,
I want to create my adhco report using WEBI and want to publish it to SAP NW Enterprise portal .
While creating the i view in the EP i dint find any option in i view template in order to create an i view for WEBI report .
However there is an option to choose crystal report as a template while creating an i view but nothing for WEBI and Xcelsius as such. So how can we embedd our Xcelsius and WEBI report in SAP Enterprise portal .
Is there any option to intergate the SAP NW Enterprise portal and BO Portal .
Kindly sugest.
Vibhav.You should be using opendocument links if using EP. with opendocument the URL contains all the pertinent info.
refer to chapter 8 of the SAP Integration kit guide for more info.
Post in the webi, general, or check out the outher documents link in the forum sticky post for the latest opendocument doc.
Regards,
Tim -
Integrating SAP-ERP system to SAP-SCM system via SAP-XI
Hi All,
My requirement is to make a scenario for Integrating SAP-ERP system to SAP-SCM system via SAP-XI,Sender side is IDOC Adapter and Receiver side is Proxy.As iam not aware of the scenario procedure can any body could explain briefly step-by-step on this.
Thanks in Advance.
ramHi,
Sender is IDOC so no need to take any communication channel & sender agreement in ID window.
Find below link of more information on IDOC configuration
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Troubleshooting File-to-IDOC Scenario in XI.
Convert any flat file to any Idoc-Java Mapping
IDOCs (Multiple Types) Collection in BPM
Outbound Idoc's - Work around using "Party"?
Troubleshooting File-to-IDOC Scenario in XI.
Proxy Configuration
File to R/3 via ABAP Proxy -
SAP Portal Integration with InfoView
Hi Experts,
I have successfully configured SAP Portal Integration with InfoView using the following steps provided by Ingo:
- set the system that you want to be authenticated against as the DEFAULT system in the options of the SAP authentication.
- go to the webapps folder of your app server and navigate to the InfOView folder
For the Java version of InfoView (Windows environment) you need to edit the file web.xml, which is located (assuming Tomcat as application server) in the directory \Program Files\Business Objects\Tomcat55\webapps\InfoViewApp\WEB-INF for the actual deployment.
In addition you can make the change to the file in the folder <INSTALLDIR>\BusinessObjects Enterprise12.0\warfiles\WebApps\InfoViewApp\WEB-INF. The files in the second locations are being used when you redeploy the web applications with a tool like wdeploy. You need to change the following values
authentication.default = secSAPR3
siteminder.enabled = False
sso.enabled = True
Then I have created URLiView to InfoView login page, when the user click on the link, BOBJ will use the DEFAULT system to authenticate user.
However, there is a new requirement for users who exist in another SAP system to SSO into InfoView too. My question is whether we can specify in URLiView url or other configuration to select which SAP System to authenticate user on?
I would like to create Role A and Role B in Portal and each will display different URLiView that will authenticate user against different SAP System if possible.
Appreciate your advise.
Regards,
MedyHi Ingo,
Thank you for your reply.
We are trying to create an URLiView to the logon page of InfoView: http://<BOBJ Server>/InfoViewApp/logon.jsp that will bring the user to InfoView home if SSO passed instead of OpenDocument URL.
I have tried to add URL parameters to the URLiView (http://<BOBJ Server>//InfoViewApp/logon.jsp?SAP_SYSID=DCD&SAP_CLIENT=200), but InfoView is still using the default system in CMC to authenticate user.
Please advise.
Best Regards,
Medy
Edited by: Medy henry on Apr 29, 2010 4:00 AM -
SAP SCM 7.0 and ERP 6.00 integration.
Hi,
We should implement SCM-APO scenario using Sap SCM 7.0. The business process will be Demand Planning & Forecasting and Supply Network Planning. We need to connect the new SCM to ERP 6.0 (Sap Basis, ABA, AP 7.0 )
Which are the requirements about ERP 6.00 ? Is it need to install the EHP 4 on ERP 6.0 or no ?
I found on Sap Markeplace a .pdf about the architecture of SCM 7.0 but the integration with Sap ERP is not quite clear.
thank's for your help.
Antonino ChiricoHi Antonio,
We also plan to install an SCM in 1 customer landscape.
According to SCM security guide SCM should be connected in secure way to ERP.
do you plan to establish secure communication between the 2 components?
BTW:
we do not plan to use PI in such scenario.In our case there is no real value in such recommendation.
Ciao
Giammaria Pace -
System Copy SAP NetWeaver Process Integration 7.1 documentation incorrect
I am trying to a Homogeneous System Copy on PI 7.1 SP07. I don't want to do a
Copying the Primary Application Server Instance Only
Because (as the documentation says) "As of SAP NetWeaver based on kernel 7.1, you can copy a primary application server instance only. With this procedure you can move a primary application server instance to a different host within your system."
I don't want to move my system to another system. I just want to do a Database refresh. That option is not available when I run SAPINST.
I see the option for database refresh in the manual, but it's not a sapinst selection
6.3Copying the Database Only u2013 Refresh
With this procedure you can refresh the content of an existing database without having to copy the primary application server instance and to reinstall additional applications servers.
I'm using the latest SAPINST and I have the correct DVD from Service Marketplace.
This database refresh option appears in both the "distributed system" selection under system copy --> target --> distribute system.
"SAP NetWeaver Process Integration -> Software Life-Cycle Options --> System Copy --> Target System --> Distributed System --> Based on AS ABAP and AS Java --> Database Refresh or Move".
Is that the correct choice? Why is the documentation wrong?
"SAP NetWeaver Process Integration 7.1 including Enhancement Package" and "System Copy for SAP NetWeaver Process Integration 7.1". So it must be correct (I think).
I do see the database refresh option under the "Thanks for the reply. So I would do this:
"Copying the Primary Application Server Instance Only
Because (as the documentation says) "As of SAP NetWeaver based on kernel 7.1, you can copy a primary application server instance only. With this procedure you can move a primary application server instance to a different host within your system."
and then do the "database refresh" option under "distributed systems"?
Is that correct? -
Hi Friends,
I have installed a Standalone Portal ( EP, EP core, BI Java) , configured LDAP as data source and imported the Portal content from Source system . ( in Development, Quality, Production)
I completed all configuration and testing completed.
But the portal user created with customized iviews roles are working fine in Development and Production.
But ....Access denied:com.sap.ip.bi.web.portal.integration.launcher error is encountered in Quality system.
In QAS system, while installation I have selected EP, EP core as Usage type.. and after Insatllation I have installed additional Usage tye BI JAVA using JSPM
Whereas in DEV, PRD ( EP, EP core, BI Java) were taken as Usage types while installation only..
Above reason may effect the Test user for access denied error.
Please suggest.
Thanks
VenkatRamana,
It looks like a permissions issue, right click on the system created for BI under System Admin-System Configuration-System landscape and open the permissions and ensure you have the everyone group added there and enduser checked.
Good Luck!
Sandeep Tudumu -
Hi experts,
com.sap.ip.bi.web.portal.integration.launcher is consistently showing as one of the slowest-running in our NW2004s SP16 Portal (non-Federated). Even the report variable screen is slow to load especially on first-time access. E.g., 31.8 seconds first time, 5.9 seconds second access in same session.
But what is curious is that it sometimes the variable screen load time goes as low as 350ms if you keep trying within the same session.
We've done the obvious - patching the BI Web App components, tuning the portal & Java runtime, checking the JCOs, load-balancing, tweaked the BI backend... but without being able to impact the performance of this application substantially.
So I would value any suggestions for improvement! Any tables we can cache? Any SAP Notes to shed some light on this area? Any Portal settings to tweak?
Thanks, MarcHi Marc,
Slow point are to com.sap.ip.bi.web.portal.integration.launcher and
JCO connection. Would you please check CPIC_MAX_CONV in SAP Note 314530?
-Regarding of BI java on Web performance, would you please check the
SAP Note 1022930?
SAP Note 1025307 is a summary notes for performance on Web.
Do you use antivirus software with a javascript scanner, but still would you please also check the SAP Note 983066 because sometime this also may responsible for slow performance.
SAP Note 948158: Performance problems/measuring BI Java Web runtime
One more thing would like to highlight:
In first acess it's slow because OLAP cache was not in use, but after the first execution it's loading the variable from the cache so it's comperatively fast then the previous acess.
Let me know, incase any confusion..
Thank you,
Tilak -
Hi!
I am about to integrate SAP BI into SAP EP 7.0.
All the necessary steps with the program "RSPOR_SETUP" I already executed.
Unfortunately when I try to execute a Query on Portal I get the following error:
iView not found: com.sap.ip.bi.web.portal.integration.launcher
Can some one help me to solve this error?
Thank you very much!
regards
Holger Thomassonhi Thom,
Make sure that you have already installed the BI 7.0 web templates as per the oss note 990321.
If not, install the BI 7.0 web templates according the note. BI 7.0 templates are :
0ANALYSIS_PATTERN
0ANALYSIS_PATTERN_EXPORT
0INFO_CONSUMER_PATTERN
0ANALYSIS_PATTERN_ICP
0ANALYSIS_PATTERN_INFO
0QUERY_TEMPLATE_BROADCAST_PDF
0ANALYSIS_PATTERN_HEADER
0ANALYSIS_PATTERN_FOOTER
0ANALYSIS_PATTERN_FILTER
Web Item
0PATTERN_BARCHART_STANDARD
Thanks. -
Up-to-date documentation, portal integration?
Now that SOA Suite 10.1.3.1.0 has gone into production when can we expect up-to-date reference documentation for all the SOA Suite components (and not just some rehashed AS documentation from the previous version)?
Specifically I want to see documentation for BPEL, ESB, Service Registry and JDeveloper (the tool itself not just ADF docs).
Also does anyone know when the portal integration will be available?
Cheers,
Mike.Now that SOA Suite 10.1.3.1.0 has gone into production when can we expect up-to-date reference documentation for all the SOA Suite components (and not just some rehashed AS documentation from the previous version)?
Specifically I want to see documentation for BPEL, ESB, Service Registry and JDeveloper (the tool itself not just ADF docs).
Also does anyone know when the portal integration will be available?
Cheers,
Mike.
Maybe you are looking for
-
Just got the n73 and don't know how to put the memory stick in. There's a place on the bottom of the phone where it looks like it should go, but can't get it to open. Any help for a newbie?
-
hi folks, when fetching data from an rfc func.mod from r/3 i get an exception: JCO Exception(102) JCO_ERROR_COMMUNICATION no protocol: 01 does anyone has an idea what went wrong? how to find easily answers to such errors? one side-question: i want to
-
Hello, 1. Our Master SLD runs on SMP (Solution Manager) server. 2. We do have also the SMSY on the sames SMP (Solution Manager). 3. Through SAP Standard daily job - LANDSCAPE FETCH (ABAP : RSGET_SMSY), SMP-SMSY is synchronized with SMP-SLD. But there
-
I just brought my clients up on SBS 2011 with Exchange. Prior to that, they were running without a domain and using Outlook with .pst files. After joining each machine to the domain, each user's Outlook now talks to Exchange via .ost. How do I exp
-
Creative MediaSoure not recognizing my play
I have downloaded version 3.30.2, now it does not recognize my player!? How do I get it to recognize my Nonmad Jukebox Zen Xtra?