SAP Script - how to hide ?
Hi All,
1). I have two pages in se71 in Script program Z_SCRIPT.
I have to hide first page some times and hide second page in some conditions. How to hide the page ?
2). How can I know the driver program name, in a <b>Script editor</b>. Is there any possibility ?
Thanks in advance,
2) Here are differt ways of finding script driver programs
driver program
Finding Driver program for smartforms
Re: How to findout the Driver Program
Regds
Manohar
Similar Messages
-
In SAP Script how to hard code my Company address in footer window
Hi All ,
In SAP Script how to hard code my Company address in footer window .
Ex : in YB_F140_ACC_STAT this script i want to keep my company address, i want to hard coad , i dont want to use any field from table.
Please give me step by step.
Thanks
SridharHi,
You can make use of standard text...
create a standard text in SO10 with your company address
and in the footer window of your script.. use include text and provide the name of the standard text you created in SO10.
In the text editor... goto insert > text> standard
You get popup give the name of the text name id and language
regards
padma -
In sap scripts how to display the driver program
Hi,
I Want to know the sap scripts How to display the output to driver programHi,
Go to NACE Transaction.
Select application for ex: if sales V1.
Click on output types.
Select the output type for ex : BA00
Double click on Processing routines.
There you can find the Driver Program name and Script/smart form name.
Reward if useful.
Thanks,
Raju -
Sap script '' how to create table frame in sap script"""
i have some problem in sap script'' how to create table frame in sap script"""
Hi,
you can use BOX command..
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT and FRAME both a measurement and a unit of measurement must be specified. The INTENSITY parameter should be specified as a percentage between 0 and 100.
1. XPOS, YPOS: Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
2. WIDTH: Width of the box. Default: WIDTH value of the SIZE command.
3. HEIGHT: Height of the box. Default: HEIGHT value of the SIZE command.
4. FRAME: Thickness of frame.
Default: 0 (no frame).
5. INTENSITY: Grayscale of box contents as % .
Default: 100 (full black)
Measurements: Decimal numbers must be specified as literal values (like ABAP numeric constants) by being enclosed in inverted commas. The period should be used as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the layout set header
1 LN = height of a line relative to the LPI specification in the layout set header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shadowing having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
check the fallowing link also
http://help.sap.com/saphelp_40b/helpdata/en/d1/803293454211d189710000e8322d00/content.htm
Mark the points if u find it useful...
Regards,
Omkar. -
In SAP Scripts How to write the fields 90 Degrees to regular format
Hi ,
I am working with SAP Scripts . Sometimes you may want to print text vertically.
I have got a requiremnt in which there we have to write some data which is to be written 90 degres to regular output.
please let me know if there is any printer setting for that .
Regards.
Rohit.Dear friend,
For printing the text verticaly you need to made a
print controle at printer level.
select a command and in that you have to go in tab general
attribute.
and in front of :Include Printer Control: give the z print controle.
in my company basis people had made one print controle
ZR090.
YOU have to use this command two times between
the text .
first command will move the printer at 90 degree and then
write the text and second will move back to horizental.
I dont know how this ZR090 can be made.
rest wht i have written is very true and currently working.
hope this will solve your problem.
rewards are expected.
Thanks and Regards
vivek kumar srivastava -
Sap Script - How to show two logos consecutive in a row.
Hi All,
If in a window I insert two lines:
/: INCLUDE ZHEX-MACRO-ZLOGO001 OBJECT TEXT ID ST
/: INCLUDE ZHEX-MACRO-ZLOGO002 OBJECT TEXT ID ST
the Sap Script shows two logos not consecutive in a row.
I'd like to show the two logos in the same row and if it is possible, separated by blanks.
Any idea?
Thanks in advance for your kind support.
Regards,
GiovanniThis is because of your page size limitation. IF you will create two windows then it will work.Aline these windows properly in layout of page.
-
Regarding sap script how to create first page and next page
could u plz let me explain the steps for creating
WE HAVE " PAGE BUTTOR" IN THE FORM.
THERE WE CAN CREATE MULTIPLE PAGES
I HAVE ONE MAIN WINDOW FOR "FIRST PAGE"
I HAVE ONE MORE MAIN WINDOW FOR "NEXT PAGE"
LIKE THIS
HOW CAN I TEST THE MULTIPLE PAGE S
EXPLAIN CLEARLY
FIRST PAGE
NEXT PAGE
THIRD PAGE
FOUTH PAGE
IN SAP CERIPT FORMhi
in ur script u have page button click to it and now do this
goto
EDIT-->Create Element
after this u have an pop-up
now enter ur page name and description here and press enter
insimilar manner creat the pages that u want
Now once uahve created the pages click to windows button
and do this
EDIT-->Create Element
after this u have an pop-up
now enter ur window name and description here and press enter
Now once u have created the windows click to page window button
here u will give the page name in the box and do the same
EDIT-->Create Element
an popup will apear select the window u want to have on this window ok
now code inside this window
Hope this will solve ur problem
Cheers
Snehi Chouhan -
Hello guys,
I need to send keys to a window in the background, but I don't want it to pop up when I do it as it may cause some errors if I'm typing something at that moment. Is this possible?
The script I'm working on converts a spool to a pdf, but when the save as window comes up, the script stops recording because that is not a SAP screen, but a windows screen.
I was actually able to make it work by ending the script right before executing the transaction, then I used AppActivate and SendKeys to execute the transaction by pressing F8 and saving the file by pressing enter, but I still have these windows popping up while the macro is running, so, is it possible to have the SendKeys point to a specific application without it bringing it to the foreground?
Also, please note that I am new to programming, so I'm not familiar with all the functions.
Thanks in advance.Hello Jahir.
I had several similar request in past.
One requirement was mass convertion of PM orders printout from spool to PDF.
I found a solution where a small ABAP-Report (implemented in coding-area of an SQ02 infoset) Transfer spool data from my SAP user as PDF to a temp Folder on my local HDD.
Then I convert this PDF-files with an small application (pdf2txt.exe) to text-files. Where a small Excel VBA code got an specific text as identifier (PM order number).
So I have pdf-files with spoolnumber-naming and dedicated PM order number. So a small VBA code is renaming my files for better identification by enduser.
Another method was to write an small VBA macro which is able to identify Save-As dialogbox and fillin a specific filename and press 'Save' by using ESER32-API methods and functions.
As you are new with programming I guess both methods are a Little bit to complex for you.
LEt me know when you Need more Information for one of above used methods by me.
MAy you can give some more Details in which Transaction you will Trigger the spools.
Br, Holger -
SAP Script - How to write data in a table format.
Hi All,
In my requirement, I need to show item data in a table format ( In a box, with horizental & veritcal lines.
can somebody pl give me a small code to do this.
Regards,
HardikHi
SCRIPT BOXES
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
<REMOVED BY MODERATOR>
Regards
Anji
Edited by: Alvaro Tejada Galindo on Jul 8, 2008 10:59 AM -
SAP Script: How do you print internal table values in a VAR window?
Hi
I want to have a window like MAIN window where I can print data like line items and the no of lines are only 3..I have added one window type VAR. I have schedule line data in one internal table in which I am calling WRITE_FORM func.mod for the newly created window..But the last schedule line only getting printed...when I debug the script looping in internal table is happening correctly and going to window also happening but in the output its showing last schedule line...What could be the problem and how to over come this?
Thanks in advance.
Regards
Vali.Hi Md,
1. type MAIN window CAN GROW (vertically)
But VAR window Cannot.
2. If our window is type VAR or FIXED
no matter how much we loop
it will show only the last record.
because it cannot grow.
(every loop pass overwrites the contents in the layout)
3. So if we use loop to print anything,
THE WINDOW MUST BE OF TYPE "MAIN" ONLY.
Hope the above helps.
Regards,
Amit M. -
SAP Script - How to check a text element is empty in Script.
Hello Friends,
I like to display a text element when it is not empty, otherwise I like to display some other text.
I know how to read text element in Script, but
How to check a text element is empty in Script
Thank you for your time.
SenthilHi Senthil,
Inside text element, we print the variables.
Variables actually gets printed in the form.
if the variable contains value the variable gets printed on script. if not, then variable not gets printed.
hope this helps. -
How to print lables in SAP SCRIPT
Hi all,
Here i have a requirement in SAP Script How to print the lables instead of Hard coding the field Description. Please help me how to do.
Regards
RaghavaHi
First Create a Lable in script
Refer This link for creation of lable in SAP SCRIPT
How to create lables in SAP SCRIPTS?
Ranga -
How to use Symbols or icons in SAP script
Hai ,
I am facing one problem in sap script , I want to display one of my field as icon (or )symbol ( tick mark ) in sap script . how to do . Particular transfer order ( check LTAP table ) having 10 line items . In 8 line items are confirmed ( pquit = 'X') others not confirmed . if LTAP-pquit = 'X' then instead of 'X' i need tick mark symbol .Icons and symbols in SAPscript texts
To print these, use output devices whose device type uses one of the following printer drivers:
· HPL2 (PCL-5 printers, such as HPLJ4, HPLJ5, HPLJ5SI, or HPLJ4000)
· POST (PostScript printers, such as POSTSCPT, or POST2)
· PRES (PRESCRIBE printers, such as KYOFS150, or KYOFS170)
· SWIN (device types SAPWIN/SWIN and country-specific versions)
Icons and symbols in ABAP lists
If you also want to print these characters in lists, you must define an output device with one of the following device types:
· HPLJ4000/HPLJ5000/HPLJ1100: Device types for PCL-5-printers
· KYOFS170: Device type for Prescribe II printers
· POST2: Device type for PostScript Level 2 printers
· SAPWIN/SWIN and the country-specific versions: generic, that is, device-independent device type for printing using Microsoft Windows -
Problem in using standard text in SAP Script
Hi All,
I have to replace English text hardcoded in a script with standard texts (SO10) in Spanish. When I am including the standard text in script, it is displayed in different font and bigger size. I want to reduce the size and change the font of standard text. Is there any way to do that?
Thanks in advance
Radhika
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Edited by: Alvaro Tejada Galindo on Jan 4, 2010 2:37 PMPlease check the links below , which might hel you..
Re: Setting font to standard text in sap script
How to change stranded text font in script
Regards
Satish Boguda -
Where do we find a box command in sap script
Hai,
where do we find a box command in sap script, how to create box command ,
its urgent help outHi
SAPScripts
POSITION WINDOW
SIZE WIDTH '160' MM HEIGHT '140' MM
BOX FRAME 10 TW
Box
BOX HEIGHT '11' MM WIDTH '160' MM FRAME 10 TW INTENSITY 35
linessssssss
BOX XPOS '20' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '45' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '80' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
BOX XPOS '120' MM WIDTH 0 TW HEIGHT '140' MM FRAME 10 TW
Boxes, Lines, Shading: BOX, POSITION, SIZE
Use the BOX, POSITION, and SIZE commands for drawing boxes, lines, and shading to print particular windows within a form or passages of text within a window in a frame or with shading.
The SAP printer drivers that are based on page-oriented printers (the HP LaserJet driver HPL2, the Postscript driver POST, the Kyocera Prescribe driver PRES) employ these commands when printing. Line printers and page-oriented printers not supported in the standard ignore these commands. You can view the resulting printer output in the SAPscript print preview.
Syntax:
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
BOX Command
Syntax
/: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Effect: draws a box of the specified size at the specified position.
Parameters: For each of XPOS, YPOS, WIDTH, HEIGHT, and FRAME, you must specify both a measurement and a unit of measurement. Specify the INTENSITY parameter as a percentage between 0 and 100.
XPOS, YPOS
Upper left corner of the box, relative to the values of the POSITION command.
Default: Values specified in the POSITION command.
The following calculation is performed internally to determine the absolute output position of a box on the page:
X(abs) = XORIGIN + XPOS
Y(abs) = YORIGIN + YPOS
WIDTH
Width of the box. Default: WIDTH value of the SIZE command.
HEIGHT
Height of the box. Default: HEIGHT value of the SIZE command.
FRAME
Thickness of frame.
Default: 0 (no frame).
INTENSITY
Grayscale of box contents as %.
Default: 100 (full black)
Measurements: You must specify decimal numbers as literal values (like ABAP numeric constants) by enclosing them in inverted commas. Use the period as the decimal point character. See also the examples listed below.
Units of measurement: The following units of measurement may be used:
TW (twip)
PT (point)
IN (inch)
MM (millimeter)
CM (centimeter)
LN (line)
CH (character).
The following conversion factors apply:
1 TW = 1/20 PT
1 PT = 1/72 IN
1 IN = 2.54 CM
1 CM = 10 MM
1 CH = height of a character relative to the CPI specification in the form header
1 LN = height of a line relative to the LPI specification in the form header
/: BOX FRAME 10 TW
Draws a frame around the current window with a frame thickness of 10 TW (= 0.5 PT).
/: BOX INTENSITY 10
Fills the window background with shading having a gray scale of 10 %.
/: BOX HEIGHT 0 TW FRAME 10 TW
Draws a horizontal line across the complete top edge of the window.
/: BOX WIDTH 0 TW FRAME 10 TW
Draws a vertical line along the complete height of the left hand edge of the window.
/: BOX WIDTH '17.5' CM HEIGHT 1 CM FRAME 10 TW INTENSITY 15
/: BOX WIDTH '17.5' CM HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '10.0' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
/: BOX XPOS '13.5' CM WIDTH 0 TW HEIGHT '13.5' CM FRAME 10 TW
Draws two rectangles and two lines to construct a table of three columns with a highlighted heading section.
POSITION Command
Syntax
/: POSITION [XORIGIN] [YORIGIN] [WINDOW] [PAGE]
Effect: Sets the origin for the coordinate system used by the XPOS and YPOS parameters of the BOX command. When a window is first started, the POSITION value is set to refer to the upper left corner of the window (default setting).
Parameters: If a parameter value does not have a leading sign, then its value is interpreted as an absolute value, in other words, as a value that specifies an offset from the upper left corner of the output page. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value. If one of the parameter specifications is missing, then no change is made to this parameter.
XORIGIN, YORIGIN
Origin of the coordinate system.
WINDOW
Sets the values for the left and upper edges to match those of the current window (default setting).
PAGE
Sets the values for the left and upper edges to match those of the current output page (XORIGIN = 0 cm, YORIGIN = 0 cm).
/: POSITION WINDOW
Sets the origin for the coordinate system to the upper left corner of the window.
/: POSITION XORIGIN 2 CM YORIGIN '2.5 CM'
Sets the origin for the coordinate system to a point 2 cm from the left edge and 2.5 cm from the upper edge of the output page.
/: POSITION XORIGIN '-1.5' CM YORIGIN -1 CM
Shifts the origin for the coordinates 1.5 cm to the left and 1 cm up.
SIZE Command
Syntax
/: SIZE [WIDTH] [HEIGHT] [WINDOW] [PAGE]
Effect: Sets the values of the WIDTH and HEIGHT parameters used in the BOX command. When a window is first started, the SIZE value is set to the same values as the window itself (default setting).
Parameters: If one of the parameter specifications is missing, then no change is made to the current value of this parameter. If a parameter value does not have a leading sign, then its value is interpreted as an absolute value. If a parameter value is specified with a leading sign, then the new value of the parameter is calculated relative to the old value.
WIDTH, HEIGHT
Dimensions of the rectangle or line.
WINDOW
Sets the values for the width and height to the values of the current window (default setting).
PAGE
Sets the values for the width and height to the values of the current output page.
/: SIZE WINDOW
Sets WIDTH and HEIGHT to the current window dimensions.
/: SIZE WIDTH '3.5' CM HEIGHT '7.6' CM
Sets WIDTH to 3.5 cm and HEIGHT to 7.6 cm.
/: POSITION WINDOW
/: POSITION XORIGIN -20 TW YORIGIN -20 TW
/: SIZE WIDTH +40 TW HEIGHT +40 TW
/: BOX FRAME 10 TW
A frame is added to the current window. The edges of the frame extend beyond the edges of the window itself, so as to avoid obscuring the leading and trailing text characters.
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
Regards
anji
Maybe you are looking for
-
ok i am an idiot. i have a usa g4 desktop (digital audio) mod#m5183, 100 - 120v~/200-240v - 8a/4.5a, 50-60hz i just brought it to the uk and plugged it in using a plug adapter but without manually switching the power switch from '110' to '230'. there
-
Reversal of a maint. order which was released through a maintenance plan?
Hi All, Is there a way to do reversal of a maintenance order that was released through a maintenance plan? Because I do not want to process the order; as such I would like to put a reversal indicator for that order and go ahead with the next order th
-
When I open my MacBook lid sometime the screen doesn't work!
Hi, I have found that recently, when I open the lid of my MacBook Pro it does not wake from sleep properly. The sleep light goes out and I can hear the hard drive spinning, but the display does not work. I have to turn off the mbp and restart it, the
-
I have problems closing 10.6 it operates finre but restarts about 6 or 7 times no matter how I try to close it
-
.mov plays fine but is jumpy when imported.
I am exporting footage from a pinnacle studio file that i intend to chop up and cut in with my current project. i exported as a .mov and it plays fine on my mac but when i import it into final cut it is jumpy and terrible, all other clips play fine,