SAP Script in ECC 6.0

Hi Guys,
I am working on a upgrade project from SAP 4.6C to ECC 6.0 with Unicode.  I have a concern that whether the SAP Script will function properly in ECC 6.0 when it is migrated from 4.6C.  Appreciate with more points if you guys could reply ASAP.
Regards,
Shankar

hELLO
I think they will work fine, but anyways check if the program control for each sapscript uses a standard FM to get data.
Also be carefull with the standard text and the logos used in the old system....you may have to upload them again.
Bye
Gabriel

Similar Messages

  • Translating   for SAP Script in ECC 6.0

    Hi All ,
    How we can do the transalations  for SAP Script in ECC6.0? . I was not able to do as we do in 4.7 version  where we follow the following path
    Translations -> Long texts -> forms .
    Can any ody help me inthis regard ?
    Thanks ,
    Dharma .

    Hi Anirban,
    I tried that way . When I entered  Scripti name in the filed " Object Name" , it is giving warning message "Object not found"( actaully it is existing ) . Even i tried to select by  F4, No thing I Could find .Transactional area defaultred to 999999( tried wiht blank also) .
    Can any body help for any alternative ?
    Thanks ,
    Dharma .

  • Sap script - Problem while printing Hungarian characters during Unicode

    Hello Friends,
    We had done  unicode changes ie Version upgrade from 4.6 C to ECC and because of that sap script Hungarian characters are printing as Junk characters ex - #####.
    Can any one please help me on this issue. In SO10 Print preview also we are facing same issue.
    Thank you,
    Regards,
    Phaneendra

    Hi Phaneedhra,
    the below thread explains the font issue for Hungary..
    SAPScript with Hungarian characters on it.  Weh we review the output online it looks good, but when we print it we get a u2018#u2019 in place of Hungarian characters.  I found the following link in SDN and am wondering if you can help.
    Hungarian Character Printing problem
    Problem in displaying special chars
    Prabhudas

  • Migrating SAP Scripts to Adobe Forms

    Hi All,
       We are going for a new Rollout in US based on our European implementation in 2001 which was on
       4.6b. Eventually this system was upgrated to ECC 6.0 recently however all the outputs are still using
       SAP Scripts.
       For the new Rollout in the US, we are planning to migrate all these outputs to Adobe Forms. Does
       anyone know if there is an easy way to migrate Scripts to Adobe Forms or else the  migration is more
       or less like fresh development.
       Please share your experiences/knowledge if anyone has worked similarly. Thank you all.
    Regards,
    Vamsee

    Hi,
    migration from script to adobe is a big problem.
    dont go for that.
    many problems will come after migration, the time to take rectification is more than the development directly.
    Thank U
    Jay----

  • If Statement in SAP Scripts

    Hi All,
    I have written the below If statement in  SAP scripts but when i execute the same the controll doent check the second line entries. If firtst line doesnot satisfy it goes to the else part. Kindly suggest what is wrong in this..
    /:           IF &T156T-BWART& = '321' OR &T156T-BWART& = '322' OR
    /:           &T156T-BWART& = '349' OR &T156T-BWART& = '350' OR
    /:           &T156T-BWART& = '312' OR &T156T-BWART& = '326' OR
    /:           &T156T-BWART& = '343' OR &T156T-BWART& = '344'.
    /:           ELSE
    /:           ENDIF.

    Hi neha,
    Try to use the '/E' fo rnext line
    /E->Extended line
    Here is a code:
    /: IF &T156T-BWART& = '321' OR &T156T-BWART& = '322' OR
    /E  &T156T-BWART& = '349' OR &T156T-BWART& = '350' OR
    /E  &T156T-BWART& = '312' OR &T156T-BWART& = '326' OR
    /E &T156T-BWART& = '343' OR &T156T-BWART& = '344'.
    /: ELSE
    /: ENDIF.
    Hope this helps you.
    Regards,
    Rajani

  • How to print last page in sap script in ladscape format?

    Hi all,
    can any 1 tell me How to print last page in sap script in ladscape format?
    Thanks In advance.
    Pravin

    Hi Pravin Sherkar,
    we can do this in SAP Scripts.
    we need to create two pages, one of landscape and another of potrait.
    now after filling the data at last we need to call the page which is of format landscape using START_FORM  function module.
    You can use condition &PAGE& = &FORMPAGES&.
    Please check this link
    Printing Portrait/Landscape in sapscript
    Re: Landscape and potrait in same layout?
    http://www.sap-img.com/ts013.htm
    Best regards,
    raam

  • How to print the text in points wise in sap script

    hi friends,
    how to print the text in points wise in sap script.
    ex: if suppose paragraph consists of 15 lines. then according to one sentence or one fullstop (.) it should give point 1. like that...
    1. hai how ru.
    2. what r  u doing.
    3.where r u.
    like this i want numbering.. waiting for ur replys.
    thanks,
    kiran

    declare a counter
    data : cnt type char 4.
    print :
    cnt = cnt + 1.
    &cnt& &text&
    cnt = cnt + 1. and so on.
    or.
    if the data is in an internal table
    loop at internal_table.
    cnt = cnt + 1.
    write form.
    in script -&cnt& &text&
    endloop.
    Edited by: NIKHILKUMAR POOJARI on Nov 17, 2008 11:18 AM

  • How to print Special Characters in Sap-Scripts

    How to print Special Characters in Sap-Scripts
    Thanks,
    Ravi

    Hi
    if u want print special characters we can use hot codes i.e '  '  (single inverted commas). in between these hot codes insert u r special characters.
    write    '    !@#$%^&*( )  '.
    for the above write statement output is
    output is   !@#$%^&*( )

  • In SAP Script how to hard code my Company address in footer window

    Hi All ,
    In SAP Script how to hard code my Company address in footer window .
    Ex : in YB_F140_ACC_STAT this script i want to keep my company address, i want to hard coad , i dont want to use any field from table.
    Please give me step by step.
    Thanks
    Sridhar

    Hi,
    You can make use of standard text...
    create a standard text in SO10 with your company address
    and in the footer window of your script.. use include text and provide the name of the standard text you created in SO10.
    In the text editor... goto insert > text> standard
    You get popup give the name of the text name id and language
    regards
    padma

  • What is the diff b/w Sap Scripts and Smart Forms

    Hi,
          Whats the diff b/w SAP Scripts and Smart Forms..
             I need the internal explanation for both Smart Forms and SAP Scripts mean when we execute what happens whether Print Program r Forms starts execution 1st  and SIMILARLY FOR SMARTFORMS WHETHER FM'S  R FORMS.
    Thanks & Regards,
    Gopi.

    Hi
    Difference with SMARTFORMS vs. SapScript(SE71)
    The Following are the differences :-
    a) Multiple page formats are possible in smartforms which is not the case in SAPScripts
    b) It is possible to have a smartform without a main window .
    c) Labels cannot be created in smartforms.
    d) Routines can be written in smartforms tool.
    e) Smartforms generates a function module when activated.
    f) Unlike sapscripts (RSTXSCRP), you cannot upload/download Smartform to your local harddisk.
    It was said that it was provided in CRM 3.0 version, but not available in R/3. You can download smartforms into Local PC in a XML format. In the same way you can upload this XML format into Smartform. From the smartform editor itself you can call download option, if you are working in CRM 3.0 environment.
    In R3 also, you can download into XML format. However, it's not sure about uploading. Refer to the program 'SF_XSF_DEMO'.
    In 4.7 Enterprise, other have seen this utlity which is completey missing in 4.6c. There is functionality to downlaod a complete form or only a particular node. (Utilities -> Download form). It will create a XML file and save it in the hard disk.
    For others, if you want to download/upload the Smartforms source, you will need the help from the Basis people. What you can do is to create a Transport and then FTP down to your local harddisk. When you need the Smartform source in another system, you have FTP up the Smartforms file back to the SAP server. Finally, the Basis team, will tp it into your system.
    g) The protect and endprotect command in sapscript doesn't work with smartforms. For example on a invoice: First data of position no 80. is printed on page one, other data of position no 80 is printed on page 2. And there's nothing you can do about it. Actually, there is something you can do about it. By using a folder node and checking the 'protect' checkbox, everything in that folder will be page protected.
    check out this link:
    http://www.sap-img.com/smartforms/sap-smart-forms.htm
    Reward points if helpful.
    Regards,
    Swathi.

  • SAP SCRIPT code problem

    521
    - Heading for trans. w/out sp.G/L indicators (item sorting method 2)-
    Transactions without special G/L indicators
    522
    - Heading for trans. with sp.G/L indicators (item sorting method 2)-
    &T074T-LTEXT&
    523
    - Heading for open item list of line items -
    &ULINE(71)&
    <K>Invoice No,,Reference.,,Inv.Date,,                   Due date,,,,
                 Balance</>
    &ULINE(71)&
    PERFORM GET_DATE IN PROGRAM ZREPORT
    USING &BSID-BELNR&
    CHANGING &S_DATE&
    ENDPERFORM.
                                                                                    530
    - Line items    Customer open items -
    &BSID-BELNR&,,&RF140-BELEGNUM&,,&BSID-BLDAT&,,&S_DATE&,,
    FORM get_date tables
            int_cond structure itcsy
            outt_cond structure itcsy.
    BREAK SNAGI.
    tables : bseg.
    data : w_belnr type ITCSY-value.
    DATA due_date TYPE rfpos-faedt.
    READ TABLE OUTT_COND WITH KEY name = 'S_DATE'.
      IF sy-subrc = 0.
        outt_cond-value = S_itab11.
        MODIFY outt_cond INDEX sy-tabix.
       ENDIF.
    SELECT SINGLE
    shkzg zfbdt zbd1t zbd2t zbd3t rebzg
    FROM bseg
    INTO CORRESPONDING FIELDS OF bseg
    WHERE
    *bukrs = bukrs AND
    belnr = int_cond-value.
    *AND vbeln = belnr.
    CALL FUNCTION 'NET_DUE_DATE_GET'
    EXPORTING
    i_zfbdt = bseg-zfbdt
    i_zbd1t = bseg-zbd1t
    i_zbd2t = bseg-zbd2t
    i_zbd3t = bseg-zbd3t
    i_shkzg = bseg-shkzg
    i_rebzg = bseg-rebzg
    I_KOART = 'D'
    IMPORTING
    e_faedt = due_date.
    outt_cond-value = due_date.
    MODIFY outt_cond INDEX sy-tabix.
    ENDFORM.
    Now the problem is that,it is int_cond-value is always picking up the first invoice number.
    and the net due date is always same for all invoices..?
    should I loop in the sap script or in the form..?

    Solved my self.
    just placing the perform and endform in 530

  • Use of IF statement in SAP Scripts

    Can u tell me how to use IF statement in SAP Scripts.
    The problem is
    if &sy-tabix& eq '1'
    total
    else
    total1.
    endif.
    this sy-tabix is not working

    i think sy-tabix will not work here....
    do like this..
    data : vtabix type i.
    loop at itab.
    vtabix = sy-tabix.
    write_form...for the text element..
    endloop.
    in form layout
    /: if &vtabix(c)& eq 1
    /:endif
    regards
    shiba dutta

  • Internal table in sap script

    Hello All ,
    I  have got a internal table with tracking numbers and I want to print all the numbers in that internal table on sap script.
    Please advise.
    Thanks
    Moderator message:  please search for available information before asking.
    locked by: Thomas Zloch on Sep 13, 2010 1:09 PM

    Hi,
    You can create a sub-routine and pass all the table entries in variables and then you can print them.

  • In sap scripts how to display the driver program

    Hi,
        I Want to know the sap scripts How to display the output to driver program

    Hi,
    Go to NACE Transaction.
    Select application for ex: if sales V1.
    Click on output types.
    Select the output type for ex : BA00
    Double click on Processing routines.
    There you can find the Driver Program name and Script/smart form name.
    Reward if useful.
    Thanks,
    Raju

  • In SAP Scripts How to write the fields 90  Degrees to regular format

    Hi ,
    I am working with SAP Scripts . Sometimes you may want to print text vertically.
    I have got a requiremnt in which there we have to write some data which is to be written 90 degres to regular output.
    please let me know if there is any printer setting for that .
    Regards.
    Rohit.

    Dear friend,
    For printing the text verticaly you need to made a
    print controle at printer level.
    select a command and in that you have to go in tab general
    attribute.
    and in front of :Include Printer Control: give the z print controle.
    in my company basis people had made one print controle
    ZR090.
    YOU have to use this command two times between
    the text .
    first command will move the printer at 90 degree and then
    write the text and second will move back to horizental.
    I dont know how this ZR090 can be made.
    rest wht i have written is very true and currently working.
    hope this will solve your problem.
    rewards are expected.
    Thanks and Regards
    vivek kumar srivastava

Maybe you are looking for