SAP Script in Function module

HI Experts,
I will get VBELN as an import parameter in my Z-FM.
Now i have to pass this VBELN to RVORDER01 script and to finally get the OTF data from CLose_form.
How to sap script processing in function module
Thanks
Chandra

Example
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.

Similar Messages

How to Send Internal table to SAP Spool using Function Modules or Methods?

Hi Experts,
How to Send Internal table to SAP Spool using Function Modules or Methods?
Thanks ,
Kiran

This is my code.
I still get the no ABAP list data for the spool, even tho I can see it sp01?
REPORT Z_MAIL_PAYSLIP.
* Declaration Part *
tables: PERNR, PV000, T549Q, V_T514D, HRPY_RGDIR.
infotypes: 0000, 0001, 0105, 0655.
data: begin of ITAB occurs 0,
MTEXT(25) type C,
PERNR like PA0001-PERNR,
ABKRS like PA0001-ABKRS,
ENAME like PA0001-ENAME,
USRID_LONG like PA0105-USRID_LONG,
end of ITAB.
data: W_BEGDA like HRPY_RGDIR-FPBEG,
 W_ENDDA like HRPY_RGDIR-FPEND.
data: RETURN like BAPIRETURN1 occurs 0 with header line.
data: P_INFO like PC407,
 P_FORM like PC408 occurs 0 with header line.
data: P_IDX type I,
 MY_MONTH type T549Q-PABRP,
 STR_MY_MONTH(2) type C,
 MY_YEAR type T549Q-PABRJ,
 STR_MY_YEAR(4) type C,
 CRLF(2) type x value '0D0A'.
data: W_CMONTH(10) type C.
data: TAB_LINES type I,
 ATT_TYPE like SOODK-OBJTP.
data: begin of P_INDEX occurs 0,
 INDEX type I,
end of P_INDEX.
constants: begin of F__LTYPE, "type of line
 CMD like PC408-LTYPE value '/:', "command
 TXT like PC408-LTYPE value 's', "textline
end of F__LTYPE.
constants: begin of F__CMD, "commands
NEWPAGE like PC408-LINDA value '',
end of F__CMD.
data: P_LIST like ABAPLIST occurs 1 with header line.
*data: OBJBIN like SOLISTI1 occurs 10 with header line,
data: OBJBIN like LVC_S_1022 occurs 10 with header line,
 DOCDATA like SODOCCHGI1,
 OBJTXT like SOLISTI1 occurs 10 with header line,
 OBJPACK like SOPCKLSTI1 occurs 1 with header line,
 RECLIST like SOMLRECI1 occurs 1 with header line,
 OBJHEAD like SOLISTI1 occurs 1 with header line,
 it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
 gd_buffer type string,
 l_no_of_bytes TYPE i,
 l_pdf_spoolid LIKE tsp01-rqident,
 l_jobname LIKE tbtcjob-jobname.
data: file_length type int4,
 spool_id type rspoid,
 line_cnt type i.
*-------------------------------------------------------------------* * INITIALIZATION *
OBJBIN = ' | '.
append OBJBIN.
OBJPACK-HEAD_START = 1.
data: S_ABKRS like PV000-ABKRS.
data: S_PABRP like T549Q-PABRP.
data: S_PABRJ like T549Q-PABRJ.
* SELECTION SCREEN *
selection-screen begin of block BL1.
parameters: PAY_VAR like BAPI7004-PAYSLIP_VARIANT default 'ESS_PAYSLIPS' obligatory.
selection-screen end of block BL1.
START-OF-SELECTION.
s_ABKRS = PNPXABKR.
S_PABRP = PNPPABRP.
s_pabrj = PNPPABRJ.
w_begda = PN-BEGDA.
w_endda = PN-ENDDA.
get pernr.
* "Check active employees
rp-provide-from-last p0000 space pn-begda pn-endda.
CHECK P0000-STAT2 IN PNPSTAT2.
* "Check Payslip Mail flag
rp-provide-from-last p0655 space pn-begda pn-endda.
CHECK P0655-ESSONLY = 'X'.
rp-provide-from-last p0001 space pn-begda pn-endda.
* "Find email address
RP-PROVIDE-FROM-LAST P0105 '0030' PN-BEGDA PN-ENDDA.
if p0105-usrid_LONG ne ''.
 ITAB-PERNR = P0001-PERNR.
 ITAB-ABKRS = P0001-ABKRS.
 ITAB-ENAME = P0001-ENAME.
 ITAB-USRID_LONG = P0105-USRID_LONG.
 append itab.
 clear itab.
endif.
"SY-UCOMM ='ONLI'
END-OF-SELECTION.
*------------------------------------------------------------------* start-of-selection.
write : / 'Payroll Area : ', S_ABKRS.
write : / 'Payroll Period/Year : ',STR_MY_MONTH,'-',STR_MY_YEAR. write : / 'System Date : ', SY-DATUM.
write : / 'System Time : ', SY-UZEIT.
write : / 'User Name : ', SY-UNAME.
write : / SY-ULINE.
sort ITAB by PERNR.
loop at ITAB.
 clear : P_INFO, P_FORM, P_INDEX, P_LIST, OBJBIN, DOCDATA, OBJTXT, OBJPACK, RECLIST, TAB_LINES.
 refresh : P_FORM, P_INDEX, P_LIST, OBJBIN, OBJTXT, OBJPACK, RECLIST.
* Retrieve Payroll results sequence number for this run
 select single * from HRPY_RGDIR where PERNR eq ITAB-PERNR
 and FPBEG ge W_BEGDA
 and FPEND le W_ENDDA
 and SRTZA eq 'A'.
* Produce payslip for those payroll results
 if SY-SUBRC = 0.
 call function 'GET_PAYSLIP'
 EXPORTING
 EMPLOYEE_NUMBER = ITAB-PERNR
 SEQUENCE_NUMBER = HRPY_RGDIR-SEQNR
 PAYSLIP_VARIANT = PAY_VAR
 IMPORTING
 RETURN = RETURN
 P_INFO = P_INFO
 TABLES
 P_FORM = P_FORM.
 check RETURN is initial.
* remove linetype from generated payslip
 loop at p_form.
 objbin = p_form-linda.
 append objbin.
 line_cnt = line_cnt + 1.
 endloop.
 file_length = line_cnt * 1022.
* create spool file of paylsip
 CALL FUNCTION 'SLVC_TABLE_PS_TO_SPOOL'
 EXPORTING
 i_file_length = file_length
 IMPORTING
 e_spoolid = spool_id
 TABLES
 it_textdata = objbin.
 IF sy-subrc EQ 0.
 WRITE spool_id.
 ENDIF.
 DESCRIBE table objbin.
 DATA PDF LIKE TLINE OCCURS 100 WITH HEADER LINE.
 CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
 EXPORTING
 SRC_SPOOLID = spool_id
 NO_DIALOG = ' '
 DST_DEVICE = 'MAIL'
* PDF_DESTINATION =
* IMPORTING
* PDF_BYTECOUNT = l_no_of_bytes
* PDF_SPOOLID = l_pdf_spoolid
* LIST_PAGECOUNT =
* BTC_JOBNAME =
* BTC_JOBCOUNT =
 TABLES
 PDF = pdf
 EXCEPTIONS
 ERR_NO_ABAP_SPOOLJOB = 1
 ERR_NO_SPOOLJOB = 2
 ERR_NO_PERMISSION = 3
 ERR_CONV_NOT_POSSIBLE = 4
 ERR_BAD_DESTDEVICE = 5
 USER_CANCELLED = 6
 ERR_SPOOLERROR = 7
 ERR_TEMSEERROR = 8
 ERR_BTCJOB_OPEN_FAILED = 9
 ERR_BTCJOB_SUBMIT_FAILED = 10
 ERR_BTCJOB_CLOSE_FAILED = 11
 OTHERS = 12
 IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
*Download PDF file C Drive
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 filename = 'C:\itab_to_pdf.pdf'
 filetype = 'BIN'
 TABLES
 data_tab = pdf.
* Transfer the 132-long strings to 255-long strings
* LOOP AT pdf.
* TRANSLATE pdf USING ' ~'.
* CONCATENATE gd_buffer pdf INTO gd_buffer.
* ENDLOOP.
* TRANSLATE gd_buffer USING '~ '.
* DO.
* it_mess_att = gd_buffer.
* APPEND it_mess_att.
* SHIFT gd_buffer LEFT BY 255 PLACES.
* IF gd_buffer IS INITIAL.
* EXIT.
* ENDIF.
* ENDDO.
 OBJHEAD = 'Objhead'.
 append OBJHEAD.
* preparing email subject
 concatenate W_ENDDA(6)
 ' Payslip-'
 ITAB-ENAME+0(28)
 ITAB-PERNR+4(4) ')'
 into DOCDATA-OBJ_DESCR.
 DOCDATA-OBJ_NAME = 'Pay Slip'.
 DOCDATA-OBJ_LANGU = SY-LANGU.
 OBJTXT = 'Pay Slip.'.
 append OBJTXT.
*prepare email lines
 OBJTXT = DOCDATA-OBJ_DESCR.
 append OBJTXT.
 OBJTXT = 'Please find enclosed your current payslip.'.
 append OBJTXT.
* Write Attachment(Main)
* 3 has been fixed because OBJTXT has fix three lines
 read table OBJTXT index 3.
* DOCDATA-DOC_SIZE = ( 3 - 1 ) * 255 + strlen( OBJTXT ).
 clear OBJPACK-TRANSF_BIN.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = 3.
 OBJPACK-DOC_TYPE = 'RAW'.
 append OBJPACK.
* Create Message Attachment
 ATT_TYPE = 'PDF'.
 describe table OBJBIN lines TAB_LINES.
 read table OBJBIN index TAB_LINES.
* OBJPACK-DOC_SIZE = ( TAB_LINES - 1 ) * 255 + strlen( OBJBIN ).
 OBJPACK-TRANSF_BIN = 'X'.
 OBJPACK-HEAD_START = 1.
 OBJPACK-HEAD_NUM = 0.
 OBJPACK-BODY_START = 1.
 OBJPACK-BODY_NUM = TAB_LINES.
 OBJPACK-DOC_TYPE = ATT_TYPE.
 OBJPACK-OBJ_NAME = 'ATTACHMENT'.
 OBJPACK-OBJ_DESCR = 'Payslip'.
 append OBJPACK.
* Create receiver list refresh RECLIST.
 clear RECLIST.
 RECLIST-RECEIVER = itab-USRID_long.
 translate RECLIST-RECEIVER to lower case.
 RECLIST-REC_TYPE = 'U'.
 append RECLIST.
* Send the document
*SO_NEW_DOCUMENT_ATT_SEND_API1
 call function 'SO_DOCUMENT_SEND_API1'
 exporting
 DOCUMENT_DATA = DOCDATA
 PUT_IN_OUTBOX = 'X'
 COMMIT_WORK = 'X'
* IMPORTING
* SENT_TO_ALL =
* NEW_OBJECT_ID =
 tables
 PACKING_LIST = OBJPACK
 OBJECT_HEADER = OBJHEAD
 CONTENTS_BIN = pdf
 CONTENTS_TXT = OBJTXT
* CONTENTS_HEX =
* OBJECT_PARA =
* OBJECT_PARB =
 RECEIVERS = RECLIST
 exceptions
 TOO_MANY_RECEIVERS = 1
 DOCUMENT_NOT_SENT = 2
 DOCUMENT_TYPE_NOT_EXIST = 3
 OPERATION_NO_AUTHORIZATION = 4
 PARAMETER_ERROR = 5
 X_ERROR = 6
 ENQUEUE_ERROR = 7
 others = 8.
 if SY-SUBRC NE 0.
 ITAB-MTEXT = 'Message Not Sent to : '.
 else.
 ITAB-MTEXT = 'Message Sent to : '.
 endif.
* else.
* ITAB-MTEXT = 'Message Not Sent to : '.
* endif.
 else.
 "SY-SUBRC Not = 0
 ITAB-MTEXT = 'Payroll data not found : '.
 endif.
 "end of SY-SUBRC = 0.
 modify ITAB.
endloop. "end loop at ITAB
sort ITAB by MTEXT PERNR.
loop at ITAB.
 at new MTEXT.
 uline.
 write : / ITAB-MTEXT color 4 intensified on.
 write : / 'Emp. Code' color 2 intensified on,
 12 'Emp. Name' color 2 intensified on,
 54 'Email ID' color 2 intensified on.
 endat.
 write : / ITAB-PERNR, 12 ITAB-ENAME, 54 ITAB-USRID_LONG.
endloop.

Userexits and sap scripts in PP module

Can anyone give me some examples of user exits and sap scripts in PP module? I need it for my resume. I appreciate your responses.

Dear,
Principle of Dual Control provides an application the option of validating certain process flows with a principle of multiple control.
Please refer this link,
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PPPDC/PPPDC.pdf
Regards,
R.Brahmankar

Null character removal in sap using a function module

Little background :
1) we are using a lot of interfaces with legacy and the data in sap has null characters for example : phone#123 .
the prob is not on sap side but on bw side when i extract this data it converts to hex format and the load fails.
2) so i wrote a abap function module for the extractor which uses the function modules SRET_TEXT_TO_BINARY and SRET_BINARY_TO_TEXT and passed the variable that has the null character and replaced it with space.
3) the prob is i get null characters in a lot of fields now and i am not sure how i can pass it to SRET_BINARY_TO_TEXT OR SRET_TEXT_TO_BINARY as they are SAP standard and it takes in just a single variable. i have all my fields in a internal table .
I apologize for the the length of the message but any help is greatly appreciated.I want to know how to pass a internal table with null in all fields to a standard function module bec . The code is below :
=======================================================
CALL FUNCTION 'SRET_TEXT_TO_BINARY'
 EXPORTING
 TEXT = input
 TEXT_LENGTH = -1
 LAISO = '00'
 IV_CATID = ' '
 IV_RFC_FOR_INITIALIZE = ' '
 IMPORTING
 OUTPUT_LENGTH =
 XBUFFER = v_hexa
 EXCEPTIONS
 FAILED = 1
 OTHERS = 2
IF SY-SUBRC = 0.
*Replacing all NULL (X'00') values with SPACE (X'20')
REPLACE ALL OCCURRENCES OF c_null IN v_hexa WITH c_space IN BYTE MODE.
 CALL FUNCTION 'SRET_BINARY_TO_TEXT'
 EXPORTING
 XBUFFER = v_hexa
 LAISO = '00'
 IV_CATID = ' '
 IV_RFC_FOR_INITIALIZE = ' '
 IMPORTING
 OUTPUT_LENGTH =
 TEXTBUFFER = output
 EXCEPTIONS
 FAILED = 1
 OTHERS = 2

The entire code :
=======================================================
FUNCTION YFR1_CA_U_NULL_SPACE.
""Local interface:
*" IMPORTING
*" REFERENCE(INPUT) TYPE C
*" EXPORTING
*" REFERENCE(OUTPUT) TYPE C
*" EXCEPTIONS
*" LENGTH_TOO_LONG
*" FAILED
This function provides the functionality of replacing the NULL
characters with SPACE .
DATA : v_hexa(100) TYPE X ,
 c_space(2) TYPE X VALUE '0020' ,
 c_null(2) TYPE X VALUE '0000' ,
 v_length TYPE i .
COMPUTE v_length = STRLEN( input ) .
IF v_length > '100'.
 RAISE length_too_long .
ENDIF .
CALL FUNCTION 'SRET_TEXT_TO_BINARY'
 EXPORTING
 TEXT = input
 TEXT_LENGTH = -1
 LAISO = '00'
 IV_CATID = ' '
 IV_RFC_FOR_INITIALIZE = ' '
 IMPORTING
 OUTPUT_LENGTH =
 XBUFFER = v_hexa
 EXCEPTIONS
 FAILED = 1
 OTHERS = 2
IF SY-SUBRC = 0.
*Replacing all NULL (X'00') values with SPACE (X'20')
REPLACE ALL OCCURRENCES OF c_null IN v_hexa WITH c_space IN BYTE MODE.
 CALL FUNCTION 'SRET_BINARY_TO_TEXT'
 EXPORTING
 XBUFFER = v_hexa
 LAISO = '00'
 IV_CATID = ' '
 IV_RFC_FOR_INITIALIZE = ' '
 IMPORTING
 OUTPUT_LENGTH =
 TEXTBUFFER = output
 EXCEPTIONS
 FAILED = 1
 OTHERS = 2
 IF SY-SUBRC <> 0.
 RAISE FAILED .
 ENDIF.
ELSE.
 RAISE FAILED .
ENDIF .
ENDFUNCTION.

SAP Upgrade - Standard function modules & modifications

Hello everybody,
we are doing a SAP Upgrade to SAP ERP 6.0 and I need your help
Some SAP standard funcion modules were modified in the last years and some weeks ago the changes were undone. The last version of the function modules are the same than the original function modules, but the version manager shows that the last version belongs to the user FGZ583 (and not SAP).
The Problem is, that SAP deals with that function modules as a modification (because the last change was done by FGZ583?), but they are identical to the original SAP function modules.
When the Upgrade is done, the SPAU/SPDD/se95 show that function modules as "modifications", although they are the same that the original ones.
What could I do to avoid that SAP deals with that function modules as modifications?
Cheers
Prashad

Hello Prashad,
Its standard that once the object is changed the corresponding entry is recorded in different tables.Even if you roll back now system will treat as the modifications because corresponding change entries are present in the tables. You can try to activate the older versions but i don't think this will help you.
This is not a point of worry as in SPDD adn SPAU you can choose reset to original for all those objects.
Even if you can get those objects to move back to the source version they will get back to the standard in the new release.So my advise will be to let your upgrade run and then reset these objects to original.
Regards
Niraj

Connection error to SAP InfoSets/Queries 'Function module not found'

I have crystal reports 2011 and I would like to connect to our SAP system (ECC6.0). I am able to connect partially but when I drill down into where I guess crystal is trying to pull a list of queries or infosets I get errors.
For infosets i get 'Function module "/CRYSTAL/GET_FUNCAREA_CATALOG" not found.'
For queries i get 'Function module "/CRYSTAL/GET_QUERY_CATALOG" not found.'
What changes need to be performed to our SAP system to get these functions added?
Thanks in advance.

Hi Joshua,
I did some checking so I changed my original reply. Those drivers are installed so nothing extra needed. I'm not completely sure how all of the Classic SAP data sources work but the only thing different is BW Query was removed in favor of MDX.
Also, the Transports are in a download package and must be installed onto the BW system. I'm checking what that means and where they are located.
The package for the BW server is located here:
<folder where I unzipped>\DATA_UNITS\CrystalReports\Collaterals\Add-Ons\SAP\Transports
Thanks again and sorry for the confusion...
Don
Edited by: Don Williams on Jul 11, 2011 10:59 AM

All sap-crm standard function module I need

Hi Experts,
I want to know about the function modules used for special purpose in crm.
who see this post and know some of those function send me the name of function module because i want to document all the function modules.
prem

this can be searched from google.

SAP Script- MR90(Finance Module)

Hi,
I have configured an new output type for ( Finance ) Redemption Claim Invoice SAP Script in SPRO.
But in the MR90. for executing the new layout with output type i am not able to create the data.
In MIRO I tried creating the INVOICE but i could not create the invoice to the new output message type.
Can anyone please guide me how to proceed with.
THANKS IN ADVANCE.
GUHAPRIYAN SUBRAHMANYAM.

Example
Definition in the SAPscript form:
/: PERFORM GET_BARCODE IN PROGRAM QCJPERFO
/: USING &PAGE&
/: USING &NEXTPAGE&
/: CHANGING &BARCODE&
/: ENDPERFORM
/ &BARCODE&
Coding of the calling ABAP program:
REPORT QCJPERFO.
FORM GET_BARCODE TABLES IN_PAR STUCTURE ITCSY
OUT_PAR STRUCTURE ITCSY.
DATA: PAGNUM LIKE SY-TABIX, "page number
NEXTPAGE LIKE SY-TABIX. "number of next page
READ TABLE IN_PAR WITH KEY u2018PAGEu2019.
CHECK SY-SUBRC = 0.
PAGNUM = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018NEXTPAGEu2019.
CHECK SY-SUBRC = 0.
NEXTPAGE = IN_PAR-VALUE.
READ TABLE IN_PAR WITH KEY u2018BARCODEu2019.
CHECK SY-SUBRC = 0.
IF PAGNUM = 1.
OUT_PAR-VALUE = u2018|u2019. "First page
ELSE.
OUT_PAR-VALUE = u2018||u2019. "Next page
ENDIF.
IF NEXTPAGE = 0.
OUT_PAR-VALUE+2 = u2018Lu2019. "Flag: last page
ENDIF.
MODIFY OUT_PAR INDEX SY-TABIX.
ENDFORM.

SAP Component - ERP Function Module

Hi,
i'm looking for information, how to figure out which ERP module (FI, MM, CO, SD) is build in which SAP component package (SAP_BASIS, SAP_ABA, SAP_APPL, SAP_AP).
I'm not talking about the enhancement packages, IS solutions or other SAP systems (BI, EP, XI, ....) but just the old and classical ERP modules.
Thanks for any help.
Regards,
Wilhelm

Logistics and Accounting is built on SAP_APPL, Human Resources on SAP_HR.
From SAP menu navigate, System> Status> click on component information icon below the component version. This will give you the component and its description.

Doubt In Function module : Write_Form_Lines in Sap Scripts

Friends,
I wanted to know for what purpose the funtion module Write_Form_Lines is used in SAP SCRIPTS.
Regards
Yamini

From SAP documentation:
The function module outputs the text lines in table LINES into the specified form window. The text lines must have the SAPscript ITF format. From the data in the text header, the system uses only the field TDSTYLE to apply the formatting attributes defined in the specified style for this text. If the field is empty, the system uses the identically named formatting attributes (character and paragraph formats) of the form.
Use parameter WINDOW to specify into which of the windows defined in the form you want to output the text. You can specify any window used in the form. The parameter FUNCTION determines how to merge the text lines to be output with any existing contents in the window. There are differences between the different window types or areas.
Prabhu Rajesh.

How to create Geniric data source using the SAP FUNCTION MODULE

Hi,
I want to create genric data source using function module
MD_STOCK_REQUIREMENTS_LIST_API (delivered by sap)
for this function module where I can find Extract Structer
or I have to create ?
How can i use this ?
Thanks in Advance

Hi Shilpa,
Check here..........
Using function module as the generic extractor
Generic Delta Update using Function Module
Document regarding R/3 extractors using function module/user exits
Generic extractors using FM

Runtime Error in execution of 'SO_OBJECT_SEND' function module

Hi friends,
We are going for upgradation from 4.6c to ECC6.0. There is one program which is used to send external mails thru 'SO_OBJECT_SEND', but the function module is giving runtime error(line no:515) in ECC6.
what could be the reason?
rewarded,
Steve

Hi,
Plz check if any latest release notes of SAP for the function module 'SO_OBJECT_SEND' are available. If so you may apply those.
If you have valid SAP service username and password you can get the notes from service.sap.com. Else your BASIS people can help you.
Which is the highest patch level you have applied?
Regards,
Renjith Michael.

Function Modules for Data and Time

Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in dd/mm/yyyy or dd.mm.yyyy and time in HH:MM:SS formats.
Thanks in advance

Hi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
If its usefull reward points

Function module / name spaces

Hello all,
I was asked to create a function module with the prefix "ZIST_" in its name. Unfortunately this name is part of the SAP namespace, as the system tells me during FM creation (it would be ok to use "Z_IST_" though). Technically it is possible to ignore the error/warning message and create the "ZIST_" function anyway.
My question now is: can this issue have any bad impact, for example during a release upgrade? If not, if it's ok to use "ZIST_" as prefix, why does the SAP system then popup this warning at all?
Thanks in adavance for your help!
Kind regards, Matthias

Theoretically, SAP could introduce function modules starting with ZIST_ in the future.
I'd say the probability is only slightly larger than zero though, and even smaller for an entire duplicate function name collision by any chance. Your server might rather get struck by lightning. And even if it happens, then you are forced to change your names, should not be the end of the world.
But it remains your risk
Thomas

Help , if there exists a Function Module

Hello everybody,
   I want a help whether SAP has some Function Module which can take an "Internal Table" as an Import Parameter and give us "CSV File" as an export parameter , more-or-less like the "GUI_DOWNLOAD" Function Module , which downloads the file as ".DAT" or ".ASC" .
    Please remember that i would need a CSV file , which i can read later through Opening a Dataset and transferring the contents into a file.
     Your immediate answers is most needed.
Thanks,
Suddha Laik

hi suddha,
try with GUI_DOWNLOAD with filetype as 'ASC' and
give the filename as 'C:\TEST.CSV'.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE                    =
    FILENAME                        = 'C:\TEST.CSV'
   FILETYPE                        = 'ASC'
APPEND                          = ' '
   WRITE_FIELD_SEPARATOR           = 'X'
HEADER                          = '00'
TRUNC_TRAILING_BLANKS           = ' '
WRITE_LF                        = 'X'
COL_SELECT                      = ' '
COL_SELECT_MASK                 = ' '
DAT_MODE                        = ' '
CONFIRM_OVERWRITE               = ' '
NO_AUTH_CHECK                   = ' '
CODEPAGE                        = ' '
IGNORE_CERR                     = ABAP_TRUE
REPLACEMENT                     = '#'
WRITE_BOM                       = ' '
TRUNC_TRAILING_BLANKS_EOL       = 'X'
WK1_N_FORMAT                    = ' '
WK1_N_SIZE                      = ' '
WK1_T_FORMAT                    = ' '
WK1_T_SIZE                      = ' '
IMPORTING
FILELENGTH                      =
TABLES
    DATA_TAB                        = itab
FIELDNAMES                      =
EXCEPTIONS
   FILE_WRITE_ERROR                = 1
   NO_BATCH                        = 2
   GUI_REFUSE_FILETRANSFER         = 3
   INVALID_TYPE                    = 4
   NO_AUTHORITY                    = 5
   UNKNOWN_ERROR                   = 6
   HEADER_NOT_ALLOWED              = 7
   SEPARATOR_NOT_ALLOWED           = 8
   FILESIZE_NOT_ALLOWED            = 9
   HEADER_TOO_LONG                 = 10
   DP_ERROR_CREATE                 = 11
   DP_ERROR_SEND                   = 12
   DP_ERROR_WRITE                  = 13
   UNKNOWN_DP_ERROR                = 14
   ACCESS_DENIED                   = 15
   DP_OUT_OF_MEMORY                = 16
   DISK_FULL                       = 17
   DP_TIMEOUT                      = 18
   FILE_NOT_FOUND                  = 19
   DATAPROVIDER_EXCEPTION          = 20
   CONTROL_FLUSH_ERROR             = 21
   OTHERS                          = 22.
do reward if it helps,
regards,
priya.
Message was edited by: Priya

SAP Script in Function module

Similar Messages

Maybe you are looking for