SAP Scripting Languages on the SDN Day - Amsterdam

I would like to give a short summary of what happened on the SDN Day in Amsterdam, the 17-th Oct. 2006.
After the breakfast Craig Cmehil gave us a welcome to the event and presented the schedule. We started with a power networking session: Four 20-minute Sessions with Six SDNers per Table. As I was sitting at the Scripting Languages table, I would like to share some impressions of the atmosphere there. We talked much about the emmerging SAP Scripting Tool and how much value it will bring to all scripting projects that plan to utilize SAP backend systems. We discussed Gregor Wolf's contest and he was so kind to inform us that his test system is also available inside the SAP corporate network, so all SAP employees now can participate too. Gregor works for Siteco Beleuchtungstechnik GmbH and the award they offer for the contest is a Siteco Vistosa task light. More information about the contest can be found at https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/4588. [original link is broken] [original link is broken] Another key discussion was held with Björn Schotte, the chief editor of PHP Magazine, Germany, presenting also his company Mayflower Gmbh. He shared some visions on business applications of PHP and stated that PHP is definitely enterprise ready.
Then after a very short pause we started the SDN breakout sessions (3-5 in parallel). I visited the sessions of Gregor Wolf, André Labahn, Björn Schotte and after this I cooperated for the breakout session of Frank Mittag.
Session 1:
Connecting Typo3 to R/3 Enterprise via Web Services with Gregor Wolf from Siteco Beleuchtungstechnik GmbH
Siteco Beleuchtungstechnik GmbH currently implements a customer service centre into it's Typo3 based website. Typo3 is an Open Source Web Content Management system based on the Scripting Language PHP. The application will allow Siteco's customers to directly check price & availability of products from the backend R/3 Enterprise system, quotations, orders and delivery status. The backend connectivity uses Web Services utilise the PEAR SOAP Package.
Session 2:
SAP supports Scripting Languages with Andre Labahn from SAP.
This session will provide you with more insights on how SAP is supporting scripting languages.
Session 3:
Scripting Languages PHP and Enterprise Software with Björn Schotte (Chief Editor from PHP Magazine).
This session showed us a brief history of PHP and PHP in Germany. Some enterprise applications of PHP were discussed. Björn Schotte was the opinion that PHP is definitely enterprise ready and he proved it with an example of a system that his company has created for Siemens.
Session 4:
Scripting Languages Tool with Frank Mittag and Vasil Bachvarov (me) from SAP
SAP will provide a open source tool to the scripting development community that is supporting the access to SAP Backend Systems via RFC/BAPIs and Webservices. See the concept and demo of the tool and discuss this with SAP Development.
There was a pretty interesting discussion about the tool. Since the time for the last session shrinked with some minutes we had to be very quick, but Frank Mittag did a great job and succeeded to explain the basic concept of the SAP Scripting Tool and show it in action for the tough time constraint.
There were a lot of questions from the audience but it was already 18:30 and we stopped at this point. There would be a second chance for questions on thursday when Frank had the opportunity to make a more complete and comprehensive walk-through of the project.
Then we gathered in the meeting hall and Shai Agassi held a speech and made a summary of the event.
The evening finished in the BoomChicago theater where everybody received a delicious meal, drinks and a great amount of fun with the ChicagoBoom comic crew.
I would like to thank all people that made this event come true! See you soon in Bangalore.
Best Regards,
Vasil Bachvarov
SAP AG

I'm be there in Amsterdam as well. In fact I am leaving the US on Sunday and arriving early Monday morning in Amsterdam.
I was planning to do a little site seeing on Monday Afternoon. If anyone else is arriving a bit early as well, they are welcome to join me. It is always more fun to site see in groups. My email address is public in my SDN business card (also not too difficult to figure out ) if anyone is interested in meeting up.

Similar Messages

Find the SAP Script name for the Output type RD00 and Appli V3

Hi Gurus,
My requirement was to copy the Std SAP Script for the output type RD00 and application name V3 and to do some modification.
Please any one suggest me how to find the Std SAP script based on the above Output type and Appl ?
Regards
paul

Hi,
The script Name is LB_BIL_INVOICE
You can find byNACE>V3>Output Types>RD00-->Processing Routines
In thje output type Press Change button and select New entries.
Regards
Sandipan
Edited by: Sandipan Ghosh on Mar 31, 2008 12:06 PM

SAP Script : to display the material description in two lines

Hi All,
I'm working on scripts.
the material description field is been passed from my driver program ..into the script..
Ex: &gs_final-maktx& ..
There r a number of other fields to be displayed ...after this field ....
Is there any option to split the 'Material description into two lines'?
Ex: at present it is :
This is material description
Requirement is:
This is material
description
I mean that there a number of field berfore and after this field......in the same line
I need to jst split the materia description ...& make it to appear in two lines.....!!
Expecting your suggestions....
Edited by: vidya vidya on Nov 11, 2008 3:17 PM
Edited by: vidya vidya on Nov 11, 2008 3:20 PM

FM TEXT_SPLIT ?
..but i handled this by code.
DATA:      zzboldsx(18) TYPE c,
      zzboldsx2(18) TYPE c,
      zzboldsx3(18) TYPE c,
      zzboldsx4(18) TYPE c.
DATA: i_lines TYPE STANDARD TABLE OF tline WITH HEADER LINE ,
        r_lines TYPE tline,
        v_cnt LIKE sy-tabix.
CALL FUNCTION 'READ_TEXT'
    EXPORTING
      client                  = sy-mandt
      id                      = stxh-tdid
      language                = stxh-tdspras
      name                    = name
      object                  = stxh-tdobject
    TABLES
      lines                   = i_lines[]
    EXCEPTIONS
      id                      = 1
      language                = 2
      name                    = 3
      not_found               = 4
      object                  = 5
      reference_check         = 6
      wrong_access_to_archive = 7
      OTHERS                  = 8.
IF sy-subrc = 0.
* Only 4 lines of Header text supported. Can add if needed
    LOOP AT i_lines INTO r_lines.
      CONDENSE r_lines-tdline NO-GAPS.
      v_cnt = v_cnt + 1.
      CASE v_cnt.
        WHEN 1.
          zzboldsx = r_lines-tdline.
        WHEN 2.
          zzboldsx2 = r_lines-tdline.
        WHEN 3.
          zzboldsx3 = r_lines-tdline.
        WHEN 4.
          zzboldsx4 = r_lines-tdline.
        WHEN OTHERS.
          EXIT.
      ENDCASE.
*   zzbolDSX = i_lines-tdline .
    ENDLOOP.

SAP SCRIPT and the report

Hi Peers,
I am working on the report which calling the Form from SAP Script and displaying the form.
I wanted a selection screen in which if the user enters some value it should automatically preview in the form.
I am really new to the ABAP Pls some help on this .
Any code is appreciated.
Every answers will be rewarded.
Pls peers help on this.
Seema.

Hi,
where is a simple example:
PARAMETERS: KUNNR(10).
PARAMETERS: PREVI AS CHECKBOX DEFAULT 'X'.
START-OF-SELECTION.
PERFORM OPEN_FORM.
PERFORM START_FORM.
PERFORM PRINT_DATA.
PERFORM END_FORM.
PERFORM CLOSE_FORM.
*&      Form OPEN_FORM
FORM OPEN_FORM.
CLEAR ITCPO.
ITCPO-TDCOPIES = 1.
ITCPO-TDDEST = PRINTER.
IF PREVI = 'X'.
    ITCPO-TDPREVIEW = 'X'.
ENDIF.
ITCPO-TDNEWID = 'X'.
ITCPO-TDDATASET = 'test'.
ITCPO-TDSUFFIX1 = PRINTER.
ITCPO-TDSUFFIX2 = 'test'.
ITCPO-TDDELETE = ' '.                " Não eliminar imediatamente
CALL FUNCTION 'OPEN_FORM'
       EXPORTING
            DEVICE   = 'PRINTER'
            DIALOG   = ' '
            FORM     = 'YOUR_FORM_NAME'
            LANGUAGE = SY-LANGU
            OPTIONS = ITCPO
       EXCEPTIONS
            CANCELED = 1
            DEVICE   = 2
            FORM     = 3
            OPTIONS = 4
            UNCLOSED = 5
            OTHERS   = 6.
ENDFORM.                    " OPEN_FORM
*&      Form START_FORM
FORM START_FORM.
CALL FUNCTION 'START_FORM'
       EXPORTING
            LANGUAGE = SY-LANGU.
ENDFORM.                    " START_FORM
*&      Form PRINT_DATA
FORM PRINT_DATA.
SELECT * FROM KNA1 WHERE KUNNR EQ KUNNR.
    CALL FUNCTION 'WRITE_FORM'
         EXPORTING
              ELEMENT = 'TEST'
              WINDOW = 'MAIN'.
ENDFORM.                    " PRINT_DATA
*&      Form END_FORM
FORM END_FORM.
CALL FUNCTION 'END_FORM'.
ENDFORM.                    " END_FORM
*&      Form CLOSE_FORM
FORM CLOSE_FORM.
CALL FUNCTION 'CLOSE_FORM'
       EXCEPTIONS
            UNOPENED = 1
            OTHERS   = 2.
ENDFORM.                    " CLOSE_FORM
Then, you must create your SapScript in order to print some information.
Regards,

Problem in sending Fax from the Output type - SAP Script

Hi Team,
I am facng a problem with SAP Script while sending the Fax from the output type. I am able to see the entire output in my outbox. But in the fax machine it is only printing the Main window. I checked with some other outputs which are using the Fax option, they are printing fine. Driver program is the Z program. Can anyone give me some Idea?
Regards,
Sasidhar

Hi Sasidhar,
Have you tried with different fax machine.
Regards,
Atish

Scripting Language Options for the Script Task Options SSIS 2012

Can python or perl be used as a script language in the drag and drop script task? I believe only VB.Net and C# are, but I see under SSDT Tools -> Options there are some choices for Python Debugging? I'd like to use python as my SSIS scripting language
in some cases. If it can not be used as the script task language, what are the Python options under Tools -> Options for?
Any experts out there who can illuminate?
Thanks all

Hello,
In SSDT in a SSIS Script task you can only use Visual Basic.NET and C#, no other programming / scripting languages.
SSDST is a plugin for Visual Studio and in VS you will find several options which are irrelevant for SSIS projects, like this Phyton debugging option.
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to create a hypertext in SAP script

Hi All,
I want to create a hypertext in SAP script.I read 'Creating hypertext in SAP script' posted on www.sdn.sap.com, but I am not able to get desired output.Kindly suggest the soloution.
Regards,
Pranjali Silimkar

Hi,
I read the document 'Creating hypertext in SAP script' posted on the link 'http://wiki.sdn.sap.com/wiki/display/ABAP/CreatingHypertextinSAPScripts', but I am not able to get the desired output.It is displaying the same text again on the same page which is not the desired output.Kindly suggest me some solution.
Regards,
Pranjali Silimkar

How to end text element in sap script

how to end an text element in sap script
this is the format.
/E text element name
&tablename-fieldname&
text-text-text-text
now if i do not end that text element it is not displayiny my below text , so what to do in this case

Go through the links mentioned below.
http://www.****************/Tutorials/Smartforms/SFMain.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
http://www.sapmaterial.com/smartform_example.html
Re: Hands on SAP Smart Forms
smartforms
Reward points if useful.

Prob in Trigerring Correct Sap-Script

Hi,
I have copied a Z_Sap script from a standard available Sap script. The form settings are done in the QC02 transaction and The form is triggerred for Pint priview from QC22 transaction. Now in the recipient field if we give language an 'EN'- its trigerring mine Z_Sap script.. and its printing all correctly..
Now the issue is if we change the recipient language from 'EN' to 'FR' or 'DE' or any other language its printing the Standard Sap Script form in the language given. I have checked in the print program that in the OPEN_FORM FM the form name is mine Z_Sap script and spras is also 'F'.
If its showing mine Z_Sap script in OPEN_FORM FM, then it shud also print the same one.. any clues on why is this happening?
Thanks in Adv

Hi,
iam not sure whether iam correct or not, but i can say if you include the text as Standard text(Tcode: so10) , and then include the standard text in script editor,
and moreover you need to transalate the language (Tcode SE63), then only you can view the script in the desired language.
Languag etranslation is important to view the text in desired language.
Revert Back if any issues,
Reward with points if helpful.
Regards
Naveen

Urgent:How to modify a script without changing the print programme

Hi all,
Can any body pls tell me <b>How to modify a script without changing the print programme</b>
Give m esome real time examples.
Good points willbe rewarded
Thanks

Hi
You can write a external Subroutine to fetch the extra data into the script program
see the following sample code
How to call a subroutine form SAPscripts
The Form :
/:PERFORM CDE_CENT IN PROGRAM ZKRPMM_PERFORM_Z1MEDRUCK
/:USING &EKKO-EBELN&
/:CHANGING &CDECENT&
/:ENDPERFORM
The report :
REPORT zkrpmm_perform_z1medruck .
DATA : BEGIN OF it_input_table OCCURS 10.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_input_table.
déclaration de la table output_table contenant les
variables exportées
DATA : BEGIN OF it_output_table OCCURS 0.
INCLUDE STRUCTURE itcsy.
DATA : END OF it_output_table.
DATA : w_ebeln LIKE ekko-ebeln,
w_vbeln LIKE vbak-vbeln,
w_zcdffa LIKE vbak-zcdffa.
FORM CDE_CENT
FORM cde_cent TABLES input output.
it_input_table[] = input[].
it_output_table[] = output[].
READ TABLE it_input_table INDEX 1.
MOVE it_input_table-value TO w_ebeln.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = w_ebeln
IMPORTING
output = w_ebeln.
SELECT SINGLE zcdffa FROM ekko
INTO w_zcdffa
WHERE ebeln = w_ebeln.
it_output_table-name = 'CDECENT'.
MOVE w_zcdffa TO it_output_table-value.
MODIFY it_output_table INDEX 1.
output[] = it_output_table[].
ENDFORM.
COPING SCRIPT
There are some Standard Sap Scripts in SAP. We cant directly execute them in scripts we have to use some T-codes and by giving some input to the required fields we can see the output printform.
I will show one example. There are some Standard Sap Scripts such as MEDRUCK which is a standard Sap Script for Purchase Order and RVINVOICE01 for billing and so on...
To see oupt of MEDRUCK go to T-code ME9F give purchase order number and execute select one number and click on dislplay messages button on application tool bar you can find the print form of MEDRUCK.
You cannot change the Standard Sap Scripts but you can use Standard Sap Scripts and Copy them to userdefined Script and can make changes to them and replace standard Sap Script with usedefind script.
Ex: Go to SE71,
on menu bar u find Utilities->copy from Client. click on it u ll find new screen showing
Form name:
Source Clinet:
Target Form:
give Form name as usedefined form name EX: ZFORM1
Source client as 000 and
Target form as MEDRUCK.
execute.
Now, the standard from MEDRUCK is copyied to your form ZFORM1.
NOW, go to SE71 and give form name as ZFORM1 and do some changes to the form such as adding logo any thing. save and Activate.
Now, you have done changes to the Form ZFORM1 and u have to replace your form with standard SAP Script.
Go to NACE Transaction.
on Applications select EF for purchase order and click Output types button on application tool bar.
now select NEU as output types dobule click on Processing Routines.
now click on Change option on application tool bar and on right side u find MEDRUCK in form place replace MEDRUCK with ZFORM1 and SAVE.
go back twice and now go to T-code ME9F give the purchase order number and execute and select one option and click on display messges button .
you will find the changes that you have done in ZFORM1. so we cant chage the standard Sap Scripts by copying the Standard Sap Scripts we can chage and replace with our forms
Refer
https://forums.sdn.sap.com/click.jspa?searchID=4089895&messageID=3239299
Regards
Message was edited by:
Kiran Sure(skk)

[SAP Script] Recorder doesn't record "import from file - btn[23]" step

Hi,
I'm a total newbie in SAP script language.
Iu2019m looking for some solution to import txt file with btn[23]. Whole procedure should look like this:
006 click IMPORT FROM FILE u2013 btn[23]
007 paste into textbox filepath "C:\Program lojalnosciowy\klienci.txt" and click OPEN
008 click CONFIRM & LOAD - btn[8]
Recorder doesnu2019t record step 007. Do you know how to fix it? Iu2019ve tried to add this line but I assume that ctxtDY_FILENAME is the wrong textbox name:
     007     MySession.findById("wnd[2]/usr/ctxtDY_FILENAME").text = "C:\Program lojalnosciowy\klienci.txt"
SAP SCRIPT CODE:
IsInput     ID     ScriptCode
START     001
     002     MySession.findById("wnd[0]/tbar[0]/okcd").text = "ZFOVERDUE"
     003     MySession.findById("wnd[0]").sendVKey 0
     004     MySession.findById("wnd[0]/usr/btn%_DD_KUNNR_%_APP_%-VALU_PUSH").press
     005     MySession.findById("wnd[1]/usr/tabsTAB_STRIP/tabpSIVA").select
     006     MySession.findById("wnd[1]/tbar[0]/btn[23]").press
     008     MySession.findById("wnd[1]/tbar[0]/btn[8]").press

Hi shyha777,
maybe it helps you if you look at the following link:
Re: Pasting filename in a panel using script
Regards,
ScriptMan

SAP SCRIPT ALIGNMENT

All,
I am developing a form with SAP Script. In the header window (it is a single window using the almost entire width of page format DINA4)i am using three character formats for printing heder lines ofr ex: helve 8, helve 10 Bold and Helve 14 bold. When i see the print preview the alignment is perfect. But when i print the page alignment of header window is distorted. Why is it so? There is some other form using different character formats developed in smart forms. Here print out is coming properly. is this the problem with SAP script. If so what is the work around for this?
Rakesh

Hi
Certain FONTS were not supported by certain printers, hence you may be getting such problem
see the following OSS notes
OSSNote:960341
Symptom
In some device types (e.g HPLJ4, HPLJ5) you experience non-uniform character spacing in the PDF document after the PDF conversion of SAPscript or Smart Forms documents, using HELVE or TIMES fonts. You want to know the reason.
Other terms
CONVERT_OTF, SAPscript, Smart Forms
Reason and Prerequisites
The problem is not due to an error in the PDF converter but due to the fact, that the printer font, underlying the device type (e.g. Univers or CG Times in PCL-5 device types), is not available for the PDF converter and is either not available in Adobe Reader. The PDF converter has to try to simulate the layout of the printer font by means of a font which is predefined in Adobe Reader. This is done by assigning the letter widths of the printer font to the font used in Adobe Reader.
The PDF file contains a table with letter widths, used by Adobe Reader in the output of text, for each used printer font (except PostScript fonts).
Example:
%Charwidth values from HP4300 HELVE 060 normal
/Widths
[ 278 333 500 633 633 1000 758 333 333 333 633...
Adobe reader converts this width table, by modifying the space between each character, so that the specified letter width (= space between the current and the next letter) is kept.
This 'Simulation' of printer fonts results in the sometimes visible irregular spaces in PDF.
The PDF converter always uses the Helvetica Adobe PostScript font for the display of HELVE and the Times Roman Adobe PostScript font for the display of TIMES. However, for these Adobe PostScript fonts, Adobe Reader often uses a Windows TrueType font, which differs slightly from the original PostScript font.
Solution
Workaround: Use the POST2 PostScript device type or the PDF1 PDF device type for the PDF conversion of documents in the Latin-1 character set. They both use the Adobe PostScript fonts Helvetica or Times Roman for the HELVE/TIMES printer fonts.
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 12:44:06
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
OSS Note: 776507
Symptom
Documents printed via SAPscript or SmartForms do not print with correct special characters, e.g. ### prints instead of Japanese or Russian characters. What to do?
Other terms
SAPscript, SmartForms, printing, device types, OTF
Reason and Prerequisites
Help required to choose proper fonts in a SAPscript or SmartForm
Solution
When using SAPscript or SmartForms to print (or email or fax) a form from a business application, many factors influence the outcome of the actual text within the form. All these factors must be checked in order to ensure a correct printout:
1) The language version of the form used to produce the printout.
Example: If you want to print a French invoice, you need to have a FR version of your SAPscript or SmartForms invoice form RVINVOICE01. And the application program must specify the corresponding language key (FR) when calling the SAPscript or SmartForms API.
2) The font selections specified in the form (possibly also in a SAPscript style or SmartStyle used in a form).
Example: In a SAPscript form or a SmartStyle you need to specify HELVE if you want to print German text in Helvetica (or similar) font. If you want to print Japanese text, HELVE is not a valid choice but you need to specify a Japanese font like JPMINCHO in your Japanese form.
3) The output character set of the device type
Every printer in transaction SPAD has a "device type" assigned. Device types used by the spooler for printing support only one single specific output character set. All text from the form has to be converted (using SAP's built-in character conversion mechanism) to this output character set.
A character set can typically support either a single language (e.g. Shift-JIS which supports only Japanese) or a set of languages (e.g. ISO 8859-1, which supports Western-European languages). It is possible that a given language (such as German) can be supported by several output character sets, e.g. you may use either ISO 8895-1 (Latin-1) or ISO 8859-2 (Latin-2) to represent German text. This is so because both character sets contain the special characters used in German.
Example: HPLJ4000 is a HP LaserJet device type supporting the ISO 8859-1 (Latin-1) character set. ISO 8859-1 can be used to represent e.g. Dutch, English, French, German, Spanish, Swedish but NOT Russian or Japanese.
As a consequence, it is ok to use HPLJ4000 to print English, German French etc. but not for Japanese or Russian.
4) The set of available printer fonts for a given device type
When formatting a document, SAPscript and SmartForms perform an automatic mapping of the font definitions in the form (e.g. "HELVE 14 point bold") and the available printer fonts of the device type. A replacement printer font is chosen, should the specified font selection not be available in the device type. Now this replacement can be problematic if a language-specific font, such as Chinese CNSONG, is specified in a form and it gets replaced by a font which does not support this language, e.g. COURIER.
To solve this problem, font families in SE73 have language attribute assigned, e.g. some fonts are characterized as being suitable only for certain languages. And when a replacement has to be chosen because the original font from the form is not available in the device type, a replacement font is chosen which has the same language attributes.
If no fonts for the language in question exist in the device type, the resulting font will not be able to print the special characters and you will see "wrong" output characters in the printout.
Note on SAPscript/SmartForms Print Preview:
The OTF Print Preview available in Windows GUI (e.g. from transaction SP01) will sometimes not show the "wrong" characters which appear on the final printout. Here is the reason: since the Print Preview runs in Windows environment, it will use Windows fonts to represent the actual printer fonts. A Windows font typically has more available characters (i.e. covers more character sets) than are actually available in a printer's resident font.
A typical example where the Print Preview will differ from the printout is here: if you have a Chinese PCL5 printer such as CNHPLJ4 and use the Western Latin font COURIER in your document, the print preview will show you Chinese characters if you (by accident) tried to format Chinese characters in COURIER font. This is because Windows will automatically choose a font that can output Chinese characters (which is actually not Courier). But when you print the job on an actual PCL5 printer with resident Western and Chinese fonts, the Courier font will not print any Chinese characters but Western special characters instead, because the printer's resident Courier font does not include Chinese characters.
Rule of thumb: all Asian device types (e.g. CNHPLJ4, JPHPLJ4, JPPOST, KPHPLJ4) support not only Asian fonts but also COURIER, HELVE and TIMES fonts. But these Latin fonts can only be used to print English text, not Chinese/Japanese/Korean characters.
Which fonts are suitable for a given language?
Language(s):            Font family to use in a form:
Latin-1 (Western Europe/Americas) *******
DE,EN,FR,ES,NL,SV       COURIER, HELVE, TIMES
                        (LETGOTH, LNPRINT)
Latin-2 (Central Europe) ****************
PL, CZ                  COURIER, HELVE, TIMES
ISO 8859-4 (Baltic) *********************
ET, LT, LV              COURIER, HELVE, TIMES
ISO 8859-5 (Cyrillic) *******************
BG, RU, SR, UK          COURCYR, HELVCYR, TIMECYR
ISO 8859-7 (Greek) **********************
EL                      COUR_I7, HELV_I7, TIME_I7
ISO 8859-8 (Hebrew) *********************
HE                      COURIER, HELVE, TIMES
ISO 8859-9 (Turkish) ********************
TR                      COURIER, HELVE, TIMES
Simplified Chinese **********************
ZH                      CNHEI, CNKAI, CNSONG
Japanese ********************************
JA                      JPMINCHO, DBMINCHO, DBGOTHIC
Korean **********************************
KP                      KPBATANG, KPDODUM, KPGULIM
                        KPGUNGSE, KPSAMMUL
Traditional Chinese *********************
ZF                      TWDPHEI, TWMING, TWSONG
Thai ************************************
TH                      THANGSAN, THDRAFT, THVIJIT
Arabic (Unicode systems only) ***********
AR                      ANDALE_J
Verify your output by examining the OTF data
When analysing printing problems of this type, be sure to check the OTF data which gets produced by SAPscript or SmartForms. OTF or "Output Text Format" is the intermediate page-description format generated from SAPscript or SmartForms. OTF will contain the final printer font names and character set/language identifiers which help to solve the problem. OTF will even name the form and the language of the form used to create the output.
The easiest way to do this is to create a spool request from your application, run transaction SP01, use menu
Goto->Display Requests->Settings
and choose
Display Mode: Raw
Now display your spool request. If this is a SAPscript or SmartForms spool request, you will see OTF data. Each line represents one OTF command, every command starts with a 2-character cmd identifier and possibly some cmd parameters follow.
Here is an excerpt from a sample OTF file where we highlight the most interesting commands:
//XHPLJ8000    0700 00000000001
IN04EALEXTEST_ZEBRA
IN05%PAGE1
OPDINA4 P 144 240 1683811906000010000100001
IN06%WINDOW2
MT0024401289
CP11000000E
FCHELVE 120 00109XSF100SF101110000067E X
UL +0000000000000
SW00067
CT00000000
ST0453037Dieses SF hat Stil ALEXTEST_ZEBRA mit
The 1st line with the // (Control) command reveals the device type usedto print: HPLJ8000
//XHPLJ8000    0700 00000000001
The 2nd line (IN = Info command) shows the name and (internal 1-char)language key of the form:
IN04EALEXTEST_ZEBRA
In this case it is the English (E = EN) SmartForm ALEXTEST_ZEBRA
The OP-line (OP = Open Page) gives the page format used in the form, it is DINA4 Portrait orientation:
OPDINA4 P 144 240 1683811906000010000100001
The CP (CodePage) cmd shows the SAP system codepage used to code the text and the active language. In our case it is codepage 1100 and language E = EN = English.
CP11000000E
Finally, the FC-cmd (Font Call) lists a printer font selected within SmartForms. Please note that every SmartForm has a designated default SmartStyle under "Form Attributes->Output Options". In addition, every text node can have a SmartStyle attached (which will override the definitions from the default style for the text). In our case the resulting printer font that was selected is HELVE 12.0 pt bold-off, italic-off.
FCHELVE   120 00109XSF100SF101110000067E X
Header Data
Release Status: Released for Customer
Released on: 22.08.2005 09:57:20
Priority: Recommendations/additional info
Category: Customizing
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
BC-SRV-SSF Smart Forms
<b>Reward points for useful Answers</b>
Regards
Anji

Can send me recent real time sap script interivew question?

Hi any one plz send me the real time sap script interivew questions... or mail me on [email protected]

Hi,
Please check the links,
http://www.sap-img.com/sapscripts/faq-for-sap-scripts.htm
FAQ on Scripts
If this data isn't enough, then you can search for SAP script interview questions in SDN, you get more results.
Regards,
Hema.
Reward points if it is useful.

Sap Script Tabular layout creation

Hi all,
Can anybody tell me how to create tabular layout for the below text in the SAP STANDARD TEXT.
1. Asbestos                                    7. Hot working, grinding, hot cutting and welding
2. Confined spaces (as defined in
the Combined Spaces Regs 1997)     8. Work on/near overhead or underground services
3. Working at heights (above 2 metres)      9. Grounds maintenance
4. Work near fragile surfaces             10. Pest control
5. Interceptor and drainage cleaning          11. Work on live electrical services
6. Loading/ unloading/ large vehicles     12. Work under lifts and lifting equipment
thanks
GR

create a paragraph in your sap-script with the right tabular.
use ,, as tabs in your standard text
use the default paragraph (***)in your standard text
call with an include the standard text
/: INCLUDE name [OBJECT o] [ID i] [LANGUAGE l] [PARAGRAPH p] [NEW-PARAGRAPH np]
use the paragraph parameter to use the paragraph you created in the sap-script
meaning of the paragraph-parameters
     PARAGRAPH
The text to be included is formatted with its style allocation. With this parameter, the standard paragraph of this style can be redefined for the current call. All * paragraphs of the inserted text are formatted with the paragraph specified here.
     NEW-PARAGRAPH
The first line of the included text has this format flag, provided it is not a command or comment line. If the optional entry PARAGRAPH (see above) is empty, all * paragraphs of the included text are formatted with the paragraph np specified with NEW-PARAGRAPH.
this will do i think
Gr., Frank

Facing problem while migrating sap scripts

Hi all,
My scenario is to migrate the script from one server to another server using the program RSTXSCRP.
Iam able to import the txt file,iam getting message that "Object imported and activated".
But when i try to open the same form in se71,its giving me error message that "Form XXXXXX language JA is inconsistent in the text file".
Iam getting this message only if the original language of the script is Japanese(JA),for all forms in EN i am able to migrate to other system.
Please advice.
Regards,
Sravanthi Chilal

first create the sap script , means copy the standard script form DE to JA language then you can use same name and migrate the script.

SAP Scripting Languages on the SDN Day - Amsterdam

Similar Messages

Maybe you are looking for