SAP SD--Difference of upgrade between SAP4.7 and ECC6.0

Hi friends,
Somebody can pls tell --Difference of upgrade between SAP4.7 and ECC6.0 in terms of sap SD module or any links for this.
Rahul

Hi Rahul,
Your question is a little general...Maybe you could go to sap help portal to search for the documentation for upgrading to 600.
As I know, we have some new functionality in release 600. For example, shipping point determination with storage location, automaticly outbound delivery creation after saving stock transfer order...
Also the screen is different for most list transactions like VA05.
Regards,
Smile

Similar Messages

Difference in value Between BW and R/3

Hi,
We are in the process of validating reports .We have observed difference in value for credit and debit amount fields in BW and for the same data is coming from standard data source 0EN_JVA_2 (Joint venture: Actual line item using delta extraction) we have done full data load. In the data source the data coming from a single field and that is spited based on debit/credit indicator in R/3.
I need your valuable input on where the problem is for the difference of value between BW and R/3.
Regards
Deva

Hi,
Is there any filterations in the IP?
Any data packet deletion activity in the start rountine?
Any update rule for the key figure is having routine with modifiying the value?
Kindly check.
In case if you are seeing number of records, always aggregation happens.
If the difference is in terms of quantity of the key figure values, kindly check the above three.
Kindly come to us so that we can suggest
Hope this helps
Janardhan Kumar

Amount difference (0.01) between GL and profit center reporting

Hi,
After we run 1KEK for ARAP transfer to profit center there is amount difference (0.01) between GL and profit center reporting for customere reconciliation account. We checked F.5D and rerun 1KEK this issue still exit.
Any idea for it? Thanks.

hi Kyle,
thanks for the effort, but it wasn't the thing i asked for ...
what i would like to find out is:
if CO area settings are set w/o profit centers, why the system still demands profit center assignment with cost center master data (ie.)
well, i can always turn off the message, but this isn't the solution i want to use ...
i will rather open one PC (along with dummy, of course) even though those are not used for the customer ... although, this will not solve statistical posting to cc with cost element category 11 ...
d.

Is there any difference in quality between mp4 and m4v?

Is there any difference in quality between mp4 and m4v? I am figuring out how best to save old VCR files. Is the 264 category the best?

So, what would that software be? Anything that I mentioned, e.g., iMovie? Any Video Converter?
I'm a Mac user so I want files that play "natively" in QT X, QT 7, QL, iPod Touch, iPhone, iPad, and/or TV players. This means I want the H.264/AAC compressed data in MOV, MP4, or M4V file containers. I can use QT 7 Pro, MPEG Streamclip, and /or QT X to move MPEG-4/AAC compressed data to MOV file containers, MPEG Streamclip to movie M4V and MOV MPEG-4/AAC data to MP4 file containers, and Subler to move MP4 or MOV MPEG-4 AVC/AAC/AC3/Chapter data to M4V file containers. This is strictly a simple "copy" operation and no recompression of data is involved. (I.e., the quality is not changed.)
iMovie is a video editor and it forces an export conversion of your project once completed which can degrade quality. Have never used the Any Video Converter so I don't know if it has an audio and/or video "passthrough" feature for data already in a compatible compression formats. If it doesn't then any conversion it makes has the potential to degrade video content.
As to AVI, this is a legacy file container abandoned by Microsoft a dozen years ago in favor of their modernized WMV compression format/file type products. Compared to MKV, AVI is an outmoded/out-of-date container which I don't recommend you use unless you are a glutton for punishment. However, if you must use it, then you might try the AvidMux app. It can "copy" compatible content to a number of file container types—including AVI and MKV. Just don't blame me if its use creates more problems than it solves on current Mac systems.

Difference between ECC5 and ECC6

Hi ,
Can any one let me know the difrence between ECC5 and ECC6, and is there any extra configuration in post-installation steps.
regards!!
Syed

Hello,
There is a post installation document available for both the releases.
you can find ecc5 post installation document at following link http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000591511&_SCENARIO=01100035870000000202&_OBJECT=011000358700000093422005E
cheers,
-Sunil

Any defference display icon between ecc and ecc6

Hi,
any defference between ecc and ecc6 to display ICON
my problem is i was run the one program in ecc then output shows with icons.
same program run in ecc6 output is same but ther is no icons like ecc
Regards
naresh

Hi
Good
Yes you could find some new icons in between ECC and ECC 6.0 but I dont think there is lots of difference between these two, though you have not mentioned the program name it is hard to give you the correct reply on that, but yes in some standard program cases you may find this kind of problems.
Thanks
mrutyun^

What is difference 4.7 business area and ECC6 business areas

hi
plz tell me what is difference 4.7 business area and ECC6 business areas
thank u
shusma

Different is there for 4.7 & ECC
Ex: you select Business area Zero Chebox in ECC .
1 - Debit Balance and Credit Balance should be the same with Business Area
Expences Dr MUM 500
Cash CR MUM 500
Business Area MUM it should be the Zero
2 - In 4.7 System not control Business Area wise Zero Values
Expences Dr MUM 500
Cash CR HYD 500
System not control BA wise Balances
Regards,
Viswa

Difference in speed between i5 and Core 2 Duo (same GHz)?

My two-year old MacBook Pro has a 2.4GHz Core 2 Duo processor and 4GB RAM.
The cheapest MacBook Pro introduced today has a 2.4GHz i5 processor with 4GB RAM.
Anyone have any idea what the speed difference might be between these two? Approximately?
And does software have to be re-written to take advantage of the i5? In other words: What do I stand to gain if upgrading today?

Read this page and it should answer your questions.
http://www.apple.com/macbookpro/performance.html
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Any SAP Note for RFC Error between BI and ECC 5.0

Hi..
the RFC Destination between BI and ECC 5.0 is giving errors.
Plz let me know if there is any Support pack or any solution to fix this error.
thanks..

Hi,
pls find the RFC connection details
1 Prerequisites
1.1 User Roles
Use
With the Building Block Connectivity a configuration role for each component is provided to access all transactions relevant for the installation. The following roles are available:
Technical name Description File name for upload
B02_01C B02 - Connectivity Configuration Role (SAP R/3) B02_01C.SAP
B02_03C B02 - Connectivity Configuration Role (SAP BW) B02_03C.SAP
C71_04C B02 - Connectivity Configuration Role (SAP CRM) C71_04C.SAP
B02_04C_SRM B02 - Connectivity Configuration Role (SAP SRM) B02_04C_SRM.SAP
Procedure
Please upload the necessary roles and add them to your user, using transactions PFCG (Role Maintenance).
2 Local Settings
This chapter describes all local settings that are necessary for each component like SAP R/3, SAP SCM, SAP BW, SAP CRM or SAP SRM.
2.1 SAP R/3
2.1.1 Define Client Administration (SAP R/3)
Use
This activity allows you to change Customizing settings.
Prerequisites
You have logged on to the system in English in order to start with the installation of the Best Practices Scenario.
Procedure
Run the following activity:
SAP R/3 Role Menu Define Client Administration (SAP R/3)
Transaction Code SCC4
SAP R/3 Menu Tools  Administration  Administration  Client Administration  Client Maintenance
Then carry out the following steps:
1. Choose Display  Change.
2. Confirm the warning message Caution: The table is cross client.
3. Select your SAP R/3 client and choose Details.
4. In the Change View Clients: Details screen, activate the following settings:
u2022 Automatic recording of changes
u2022 Changes to Repository and cross-client Customizing allowed
u2022 eCATT and CATT allowed.
5. Save.
6. Go back to the SAP Easy Access menu.
2.1.2 Defining a Logical System for SAP R/3 (SAP R/3)
Use
The purpose of this activity is to create a logical system for your SAP R/3 System. To enable communication between systems within your system landscape, you must
1. Define the systems as logical systems.
2. Assign the logical system for the SAP R/3 System to a client.
This enables the systems to recognize the target system as an RFC destination. If the logical system has already been created, skip this activity.
Logical systems are defined cross-client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Defining a Logical System for SAP R/3 (SAP R/3)
Transaction Code SPRO
SAP R/3
IMG Menu Basis Components (for R/3 Enterprisse: SAP Web Application Server)  Application Link Enabling (ALE)  Sending and Receiving Systems  Logical systems  Define Logical System
2. Choose New entries.
3. In the column Log System, enter a name for the logical system that you want to create.
4. In the column Name, enter a description of the logical system.
Log. System Name
where XXX is the system name
and NNN is the client.
5. Save your entries.
A transport request for Workbench appears.
6. Select an existing request or create a new request, if necessary.
A transport request for Customizing appears.
7. Select an existing request or create a new request, if necessary.
2.1.3 Assigning Logical System to Client
Use
The purpose of this activity is to make an assignment for the logical system. Skip this activity if a logical system is already assigned to your client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Assign Logical System to Client
Transaction Code SCC4
SAP R/3 Menu Tools  Administration  Administration  Client Administration  Client Maintenance
2. Choose Display ® Change.
3. Confirm the warning message The table is cross client.
4. Select your R/3 client and choose Details.
5. Enter the name of the logical system of your SAP R/3 client.
6. Save and confirm the warning message Be careful when changing the logical system.
7. Choose Back twice.
2.1.4 Creating an RFC User (SAP R/3)
Use
To enable communication between the SAP R/3 back-end system and the SAP SCM System, you have to create an RFC user in the SAP R/3 System.
The RFC user in the application client enables multiple RFC connections. Skip this activity if an RFC User has already been created.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Creating an RFC User (SAP R/3)
Transaction Code SU01
SAP R/3 Menu Tools  Administration  User Maintenance  Users
2. In the User field, enter RFCUSER.
3. Choose Create.
4. On the Maintain User screen, enter the following data on the Tab entry screens:
Address
Last Name
Function
Logon data
User type System
Password LOGIN
Profile
Profiles SAP_ALL
SAP_NEW
S_BI-WX_RFC
Defaults
Logon Language EN
5. Save your entries.
2.3 SAP BW
2.3.1 Define Client Administration
Use
This activity defines changes and transports of the client-dependent and client-independent objects.
Procedure
1. To perform this activity, choose one of the following navigation options:
SAP BW Role Menu Local Settings ® Define Client Administration
Transaction Code SCC4
SAP BW Menu Tools  Administration  Administration  Client Administration  Client Maintenance
2. Switch to change mode.
3. Select your client.
4. Choose details.
5. In field Currency enter the ISO-code of the local currency, e.g. USD or EUR.
6. In field Client Role enter Customizing
7. Check the settings for changes and transport of client-specific objects and client-independent object changes
If you want to use the settings made by BC-Sets or manually in other systems (other than BW), u201CAutomatic recording of changesu201D and u201CChanges to Repository object and cross-client Customizing allowedu201D is required.
Result
Client administration has been defined to support the installation using Best Practices.
2.3.2 Defining a Logical System for SAP BW (SAP BW)
Use
In this step, you define the logical systems in your distributed system.
Prerequisites
Logical systems are defined cross-client. Therefore cross-client customizing must be allowed in your client (this can be checked in transaction SCC4).
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW Role Menu Defining a Logical System for SAP BW (SAP BW)
Transaction Code SPRO
IMG Menu SAP Reference IMG  SAP Customizing Implementation Guide  SAP NetWeaver  Business Information Warehouse  Links to other Systems  General Connection Settings  Define Logical System
1. A dialog box informs you that the table is cross-client. Choose Continue.
2. On the Change View u201CLogical Systemsu201D: Overview screen, choose New entries.
3. On the New Entries: Overview of Added Entries screen enter the following data:
Field name Description R/O/C User action and values Note
Log. System Technical Name of the Logical System Enter a name for the logical BW system that you want to create
Name Textual Description of the Logical System Enter a clear description for the logical BW system
4. Choose Save.
If a transport request for workbench and customizing is displayed choose existing requests or create new requests.
If you want to continue with the next activity, do not leave the transaction.
Result
You have created a Logical System Name for your SAP BW client.
2.3.3 Assigning Logical System to Client (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW
Role Menu Assigning Logical System to Client (SAP BW)
Transaction Code SCC4
SAP BW Menu Tools  Administration  Administration  Client Administration  Client Maintenance
1. In the view Display View "Clients": Overview, choose Display.  Change
2. Confirm the message.
3. Select your BW client.
4. Choose Details.
5. In the view Change View "Clients": Details, insert your BW system in the Logical system field, for example, BS7CLNT100.
6. Save the entries and go back.
2.3.4 Opening Administrator Workbench
Procedure
To carry out the activity, choose one of the following navigation options
SAP BW Modeling  Administrator Workbench: Modeling
Transaction Code RSA1
1. In the Replicate Metadata dialog box, choose Only Activate.
2. If a message appears that you are only authorized to work in client ... (Brain 009) refer to SAP Note 316923 (do not import the support package, but use the description under section Workaround).
2.3.5 Creating an RFC-User (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW Role Menu Creating RFC User
Transaction Code SU01
SAP BW Menu Tools  Administration  User Maintenance  Users
Then carry out the following steps:
1. On the User Maintenance: Initial Screen screen:
a. Enter the following data:
Field Entry
User RFCUSER
b. Choose Create.
2. On the Maintain User screen:
a. Choose the Address tab.
b. Enter the following data:
Field Entry
Last Name RFCUSER
Function Default-User for RFC connection
c. Choose the Logon data tab.
d. Enter the following data:
Field Entry
Password LOGIN
User type System
e. Choose the Profiles tab.
f. Enter the following data:
Field Entry
Profiles SAP_ALL , SAP_NEW and S_BI-WHM_RFC
g. Choose Save.
Do not change the password of this user as it is used in RFC connections.
2.3.6 Define RFC-USER as default (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options
SAP BW Role Menu Define RFC-USER as default (SAP BW)
Transaction Code RSA1
SAP BW Menu Modeling  Administrator Workbench: Modeling
1. On the Administrator Workbench: Modeling screen choose Settings  Global Settings.
2. In the Global Settings/Customizing dialog box choose Glob. Settings.
3. On the Display View u201CRSADMINA Maintenance Viewu201D: Details screen:
a. Choose Display  Change.
b. Enter RFCUSER in the BW User ALE field.
c. Choose Save.
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy

Differences xml-db between R10g2 and R11_2 ?

HI,
there are differences in xml-db between R10g2 and R11_2 ?
where I can find about it
regards
Edited by: astramare on Feb 17, 2011 3:04 PM

ok:
we have changed our DB from R10.2 to R11_2
by using DataPump
we do create a lot of different schema-based xml-Data
by using DBMS_XMLGEN
from a sql/xml-function based View
like
xmldoc := DBMS_XMLGEN.getXML(ctx);
xmldoc_xmlType:=(xmltype(xmldoc)) ;
xmldoc_xmlType.isSchemaValid
dbms_xslprocessor.clob2file
all other xml_schema do work fine after migration
with this one following exception
while validate the output inside a package
we get an error
LSX-00285: Referenzierter Schlüssel "405986.0" ist nicht definiert
to look at differences
I have identical created
one XML-output in the ( old ) 10gR2 -DB
and
one XML-output in the ( new ) 11R2 - DB
both I can ok validate against the same schema inside XML-Spy ( Vers 2006 )
but
the R10_2 XMLType does ok validate in DB 10gR2
the R11_2 XMLType does not validate in R11 !
by view the xml-data-files in XMLSpy or another editor
there obvious a difference:
In the SQL/XML-select I work with .extract
the xml-output from R10 is correct in a xml-like structure
the xml-output from R11 is not
both data-file have the identical ascii-words
but different size in kByte
the call to register the schema in R10_2 and R11_2 is identical:
dbms_xmlschema.registerSchema(
schemaurl => vschemaurl,
schemadoc => xsd_file,
local => FALSE,
gentypes => TRUE,
genbean => FALSE,
gentables => TRUE,
force => FALSE,
owner => dbuser
,CSID => nls_charset_id('AL32UTF8')
the xml-schemas looks :
R10
<xs:schema targetNamespace="http://www.abcde.de/nsdir"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
xdb:flags="311"
xdb:schemaURL="http://www.abcde.de/nsdis/SCHEMABEZ.XSD"
xdb:schemaOwner="USER"
xdb:numProps="36">
R11:
<xs:schema targetNamespace="http://www.abcde.de/nsdir"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
-- new ?!
xdb:storeVarrayAsTable="true"
-- flag ?!
xdb:flags="8503"
xdb:schemaURL="http://www.abcde.de/nsdis/SCHEMABEZ.XSD"
xdb:schemaOwner="USER"
xdb:numProps="36">
may be its a problem inside the data in the Views ?
or a difference between R10 and r11 ?
regards

Trasfering upgrade between iPad and phone

Is it possible to transfer an device upgrade between an iPad and cellular phone? I want to upgrade my phone but my contract isn't up until February, but my iPad is eligible now. Let me know!

I just did this with no problem. Used available upgrade on my iPad account, Received phone by FedEx. I used the "Activate or Swtich Device" option on the web page in my account. I just activated the device on my phone line. iPad still works, and the new iPhone works. I never needed to activate it on the iPad line. I did not even transfer upgrade.
The iPad account now shows eligible for upgrade in 20 months, and the phone still has the original date for upgrade (in about 1 month).
Hope that helps.

Does anyone know what triggers the switch between text and iMessage in the middle of a conversation? Are there any differences in billing between text and iMessage?

In the middle of a text conversation between another iOS 5.0 iPhone user and myself, the conversation elements switched back and forth several times between Text and iMessage. The phone actually tracked it and put little lines indicating the switch, and my comments changed from green to blue and back again. I can't think of anything I changed in the middle of the conversation. I was outside WiFi range, using the Cell network at the time. Now I tried it again, while i'm on WiFI and the messages are Text (green) again.

1. Windows 8.1 Enterprise w Update is the best. It allows you for sideloading in corporate environment without additional tools and licenses.
http://technet.microsoft.com/en-us/windows/jj874388.aspx
2. N series is for EU (without IE).
3. Profesional is fine, but you will need some tools to achieve the same functionality that you have in "pack" Enterprise.
4. VL is volume license, a type of license for multiple computers (to say it simply)
5. MSDN forum is better alternative for problems like this.
6. Attached to MSDN are licenses or at least references to web resources. Read license agreements carefully and let your installation and use follow the license.
Rgds
Milos

Difference in Balance between FAGLBO3 and FAGLL03?

Hello Experts,
I have perticular one GL Account (ASSET UNDER CONSTRUCTION) where the fagll03 and Faglb03 balance are not matching.
What may be the reason and how i ll sort it.It is high praority.
Regards,
Sumeya offrin

Hi,
First execute t.code FAGLF03 to find out the which are document not posted in the relevant period.
Then kindly execute program RGURECGLFLEX ( T.code : GLGCU1) and input the company code, fiscal year,posting period.
Select the test run & Load doc into all ledger.
If the system will show document which are not posted correctly.
Remove test run and execute in production run. All the relevant document will be posted and the difference will be removed.
Check the SAP Note : 1156974 for more info.
Note : RGURECGLFLEX will consume more time, so it will be better if you execute this program when there is not much load in the system.
Do revert fro any clarification.
Regards,

What are the main differences in features between FCP and FCE?

I'm buying filmmaking equipment for my teenage son, who has shown himself to be serious about getting started making shorts. One big decision (regarding costs and $$$ allocation for other system elements such as the computer and camcorder)is whether to get Final Cut Pro (studio version) or Final Cut Express. He has used Final Cut in several camps and film school programs. Feedback will be most appreciated!

FCP can't be bought by itself, however Final Cut Studio includes Color, Motion, and DVD Studio Pro.... FCE will not edit any format except DV and HDV. FCP will edit most every format. FCP is keyframeable, where FCE really isn't. There really is a ton of difference between the two apps. FCE has no media management, has fewer effects, etc... One's an enthusiasts' program and the other (Final Cut Studio) is a full professional suite of software... it's certainly worth the difference, but might be more than you want to spend. FCE is a subset of code taken from FCP, so learning it will help with learning FCP... the interface is nearly identical.
Jerry

Is there a difference in Photomerge between CC and Elements?

Hello! I have a quick product question - I have been using Lightroom for some time now and am very comfortable with the workflow I have going. I shoot quite a bit of film, and recently have been "scanning" my 6x6 negatives with my DSLR and a macro lens. I downloaded a trial of Elements 13 to see how the Photomerge option works. Long story short, it works great. Now I am curious if there are any differences between the Photomerge option in Photoshop CC vs Photoshop Elements 13. The only difference I can come up with is that the CC Photomerge has an option directly from Lightroom and Elements does not (merge to Panorama still greyed out with Elements installed). Thank you for your great products, and I truly appreciate your insight.

Most people either use one app or the other, and have very limited knowledge of the one they don't use. But from what I can find from a quick look round the web, they seem to be the same.
Review: Photoshop Elements 13 gets Photomerge and content-aware fill | Macworld

SAP SD--Difference of upgrade between SAP4.7 and ECC6.0

Similar Messages

Maybe you are looking for