SAP SD/FI -- Help required to Identify "statistical condition type filter"

Hi All,
    I have a problem while I'm executing the tcode vf03 to print a smartform, It goes through the standard program SAPLV61A. There some where it is checking for KSTAT = 'X' and then it is removing the records from the internal table where KSTAT = 'X'. I want to catch the values for both KSTAT = 'X' & KSTAT = ' '.
Thanks,
  Santosh

Hi,
Find in  T683S  table.
Get the pricing procedure in VBRK table and pass to T685S table. you get all the consition records.
Check what are all have the filed KSTAT as X.
Regards.
Sai

Similar Messages

  • Statistical condition type is not showing same value

    Dear All,
    I have one issue related with pricing condition that i want to use one statistical condition type ZEM1 suppose 100 INR which is entered manually at the contract level for suppose 10 qty but when i am creating the First sales order for 5 qty with reference to contract ,the ZEM1 condition is copied 100 INR and in second sales order for remaining 5 qty it is distributed with quantity and showing value 50 INR.But my requirement is such that i want the condition value of ZEM1 should appeare as 100 INR from contract to billing level for every sales cycle.Is it any way to make the condition type such that it will have the same value suppose 100 INR from contract to billing doc for every sales orders.
    I maintained the copying control pricing type as "D" for S.Doc to S.Doc.
    please suggest.
    thanks in advance
    ravi k

    Hello
    Check the condition type configuration. in the calculation type give the indicator as B- Fixed amount
    the copy control seems to be correct.
    you can try above and revert
    hope this helps
    Thanks
    akasha

  • Requirements not fullfilled for Condition type - Pricing Procedure

    When I am doing the pricing procedure, the error thrown is "Requirements not fullfilled for Condition type". Can any one suggest how to fix this problem ?

    Hi Sunil,
         Please first of all check the condition type in Pricing Procedure. In condition type column check the requirement. Here conditon is,  once requirement is fulfilled which you have mentioned in the condition type then only it will be executed. Take a help of  ABAP'er regarding this requirement if it is customized requirement.
    We should know the purpose of requirement in condition type.
    Venkat.

  • How to stop non statistical condition type value from updating total amount

    Gurus,
    Can any body explain me how to do following setting,
    How to Stop non statistical condition type value from updating Total Amount
    Regards,
    Sai

    Dear Sai,
    You need to make that condition type as Statistical one
    Go to SPRO - Sales and Distr. - Basic Functions - Pricing - Define and Assign Pricing Proc - Maintain Pricing Proc - Control Date
    Select the proc. - select the condition type and activate the  check box Statistical
    This will show the amount of the condition but will not consider for the net value calculation
    Hope this will help you
    regards,
    Sagar

  • Statistic Condition Type inactive when duplicated

    Hi gurus,
    I wonder if there's any way to make a statistic condition type become inactive when the user inserts another equal one.
    Example:
    Here is my procedure: ZP0001 with this condition type ZC01 set statistic.
    If I create a new sales order and I insert this condition in the procedure twice, the system does NOT deactivate any of them. It just let them occur at the same time.
    If I go like this with a non statistic condition type, then the system deactivate all duplicated types and only remains the last one inserted.
    Do you know if this behaviour is possible for statistic condition types in any way?
    Thanks in advance,
    John

    Hi,
    a statistical condition type can not be inactive because it is not taken into account in the calculation per definition as statistical.
    One more sentence to clarify to the sentence before. It will be inactive but still displayed - as this is the nature of a statistical condition.
    So far so good. But I know exactly what your problem is, when your statistical condition type is present twice you would like to surpress the earlier record.
    We had a similar requirment once. We had two different statistical condition types which were displayed at the same time. 
    The requirement was to only display one of the two condition types. When A was present B should not be shown. I tried with condition exclusion but it did not work for statsitical conditions (as they can not be set inactive...). But it worked very good with a pricing requirement we created ourselves.
    Good Luck.

  • How to set required for group of condition type in the same condition class

    Hello,
              we have a group of condition type with the same condition class B, the last one have been set, and all of others will be inactive.
    but we don't set any required for all the condition types in pricing control, so if user don't set any of them, the sales order or billing is still saved. that is a risk.How can i fix it? Thanks.
    Sophie

    Hello,
      incompletion log is not available in invoices.
    You have different options:
    - activate a validation in FI when the Billing document is released into accounting,  so that te release into accounting is not allowed if the invoice amount is zero;
    - define a subtotal in the pricing procedure as sum of the pricing conditions of your group, then develop a custom routine to be assigned in the formula "CalType" (field T683S-KOFRM) where an error should be raised if the amount of the subtotal is zero (use as an example formula 48);
    Best regards,
    Andrea

  • Identify TAX condition type from pricing procedure

    Hello,
    I need to identify Tax condition type for various countries used in Old sales orders.We are moving to an external Tax engine and I need to identify what condition are being used to calculate tax in various countries. I know the pricing procedure but we have a lot of sales order and there is no documentation available.Is there any table where I can filter based on the sales org from existing sales order and find the Corresponding Tax condition type.
    Regards,
    Amanda

    One option is
    you have to execute SE16, input table KONV where you maintain the tax condition type and execute.
    System will populate all SD documents that are having that tax condition type.  There you have to copy the field "Doc. condition" and paste it in VBAK table in SE16 so that you will get all sale orders.
    The other option is
    you need to identify what access sequence is maintained for that tax condition type which you can see in V/06.  Next go to V/07, select this access sequence and execute.  There check what tables are maintained.  For example, in your case, it could be table 110.  So you have to develop a query by table joining A110 and VBAK in SQVI where you can take sale orders based on sales organisation.
    thanks
    G. Lakshmipathi

  • To write&activate new Requirement for customr discount condition type k007

    Hi Guru's,
    how to write and activate new Requirement for customer discount condition type K007 in VOFM.
    could please guide me step by step process or if you have any programming language related to this please provide me that would be helpfull to me...
    please let me know if my question is not clear..
    Thanks in advance and will give full points...
    Srinivas.

    Hi S,
    u can use options condition value, condition based values for this requirement.
    1.all Z requirements starts from 9xx onwards ,
    2.u need to use Internal tables KOMP in that requirements based on the given conditions.
    3. Dont active all , select only new requirement->Edit->Active.
    ref any standard requirement for sample codes.
    regards
    Prabhu

  • Statistical condition types not getting displayed in invoice

    We  have configured the tax collected at source (TCS) condition types and make them as statistical in the pricing procedure. Now, the issue is when we are using them the values for these condition types are getting calculated correctly as the total value is correct but in the invoice their individual values are not getting displayed.
    In the analysis also we can see that the condition records are found but being statistical condition they should get displayed in the invoice as only the correct total value will not serve the purpose, please help
    Thanks & regards
    Puneet Agrawal

    Hi
    Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
    If the condition type for taxes is coming then you can print the taxes.
    First check the related condition type for Taxes in T685 table and see here in the code.
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Sales Pricing Procedure : Statistical Condition type and Reqt.

    Hi,
    I wish to know what else is the use of marking the condition type statistical except the ones i know. (a) now included in the final price. but will be seen in the condtions (b) Can be used to send that value to a particular account.
    What is the use of the following routines in the Reqt. field and what do they do
    a. (2) - Item with Pricing. Now in this routine it check "prsfd". which is field called carry out pricing in the table.
    Can someone explain me how this works. Also if you can explain how these subroutines genrally work. It would be great.

    Hi Dheeraj,
    What you told is correct that Statistical Condition means that the condition item is ignored. In other words, no flow records are generated in the cash flow.
    While regarding Requirement, it is pre-requisite to take that particular Cond type (to which it is assigned) into consideration while carry out pricing.
    Like in your case Requirement "2" (item with pricing), the condition type(s) to which it is assigned would be taken into pricing only when item has pricing attched to it.
    Regards
    SD

  • Statistical Condition type in COPA

    Hi All,
    I have a sitaution in which I have to capture the value of a condition type, which is statistical, in to COPA. Can any one help me how to setup this and how can I map it to a value field.
    I would appreciate your comments.
    Thanks
    MKR

    Hi!
    For the same you need to go to t.code KE4I.  You need to assign all condition types to COPA value fields.
        All condition types that you want to transfer to COPA must be active in SD pricing procedure. Inactive conditions in a billing item are not transfered to COPA.
        Conditions do not need to be active , however to be transfered with sales order items, since the transfer of incoming sales order items are always statistical.
    Hope this will help much.
    Pls get back to me for further query.
    Thanks & Regards,
    Taral Patel

  • Two calculations are required for a single condition type

    Hello Experts,
    I have a requirement to calculate the VAT conditon type in a pricing procedure...like in one case  ( If TAX Indicator  set to "0,1,2" at sales order header level) tax should be calculate on PR00 & 3 other condition types....in second case (  If TAX Indicator set to " 3 " at sales order header level) tax should be calculate on 3 other condition types except PR00.    But make sure that TAX Indicator  "3" always set by user manually during the creation of sales order.
    Another hurdle is if user set the indicator as 3 manually during the creation of Sales order then price will not be redetermine automatically, So I need this to be happend automatically.
    Let me know how should I proceed further to fix the requirement.
    Appriciate quick response.
    Regards,
    Chandu

    Hi Sudir,
    Somehow my edit did not get saved:
    This is suppoed to read
    Set up your pricing as follows:
    10 PR00
    20 Z001
    30 Z002
    40 Z003
    100 Subtotal #1 = Sum of 10 through 40
    110 ZSUB = Discount condition with condition record for 100% for Tax indicator = '3' (otherwise 0)  with base = line 10 (PR00)
    200 Tax base = 100 through 110
    In other words:
    For tax indicators = 0,1 or 2
    Tax base (Line 200) = PR00 + Z001 + Z002 + Z003
    For tax indcator = 3
    Tax base = PR00 + Z001 + Z002 + Z003 - (100% x PR00)  =  Z001 + Z002 + Z003
    Yiou will probably aneed to put some code in one of the sales order user exits to trigger repiricing if you change this manually.

  • Is it possibale statistical condition type value at FI GL account.

    Dear Expert,
    Hi I have a requirment like:  Add new manual condition types at pricing porcedure level.
    When I am creating SO these condition types value wont calculate in net value but that value needs to flow in to respective G/L account.
    How we can map this requirement at Pricing Procedure level.
    Can you please suggest.

    Hi Ranganayakulu,
    Yes, it is possible. Did you try to search in the forum. The answer is already provided in one of blog of SCN (" DOC-29788" in google).
    Please search and let us know.

  • Statistical condition type mapping

    In COPA (Profitability Analysis), we map transfer of billing document to flow into COPA. The value fields of COPA are mapped with Condition type of SD (Transaction Code KE4I).
    The situation is few condition types are assigned to Accounting key as well as are statistical in the Pricing Procedure. So whichever Condition type is assigned to Accounting key will flow to FI and same condition type in other Pricing Procedure is statistical will not flow to FI.
    However in COPA, the condition type is mapped to COPA value field. So all the values in the billing document against that condition type will flow to PA. This would lead to differences in FI & COPA reporting to the extent of same conditions with statistical tick.
    How to deal with the situation so that FI & COPA reporting are sync ?
    Eg.
    In COPA mapping Condition type "EXD" mapped to COPA Value field "ERLOS"
    Pricing Procedure Condition Type AccKey Statistical
    PP101 EXD ERL
    PP102 EXD (no A/c Key) Statistical
    How do i map EXD so that COPA & FI reporting are in harmony ?

    Hi
    i would say thats a wrong design...
    In your current case of Dr Memo, either you should not be using the same cond type as statistical OR If you are using it, you shud have reset it to Zero using the following IMG Menu for the Billing type pertaining to Dr/Cr Memo
    IMG>COPA>Flows of actual values > Billing> Reset condition types
    With this, revenue cond type will be updated to COPA with zero value during Dr/Cr Memo
    Regards
    Ajay M

  • Want to move to SAP BW. Help required

    Presently I am working in India in the Data Warehousing area as Business Analyst. I have considerable functional experience and very good exposure to Supply Chain. Apart from that I have some exposure to BAAN ERP package.  I would like to move to SAP BW. I have access to SAP BW and want to move to SAP BW. Can any want suggest what kind of role I can fit into?

    bb,
    Could you tell me if you have access to a BW system for development or as an end user.
    Also I suggest you have a look at BW Projects happening in your company. That would give you an idea.
    Also one more thing to do would be to go thru Fu and Fu first ( BW Setp by Step ). SDN please forgive me for recommending this book, it is on an older version but it is the only one in this category. ( Someone has to write a better book ...)
    Then get yourself familiar with how DW and BW work , one area where you could fit in would be in Data Modelling and depending on your expertise with Data Modeling you could sell your skills as a BW Data Modeler.
    But , the caveat is that getting in head forst as a data modeler is tough , most probably you might have to:
    1. Get into a support project and work your way upwards or..
    2. Get certified and then go into hardcore BW.
    Arun
    P.S I am also a Business Analyst of the DW Practice at my company and now full time into BW.

Maybe you are looking for