SAP-SD for fresher
Hi,
I am a fresher from coll. I am into SAP-SD. I would like to know the features of SAP-SDWhich is better Functional or technical ?
Hi,
It is a very good decision to be trained in SAP-SD.
SAP is a very unique ERP software application. To make career in SAP with any module, the prerequisites are given below :
1, Min 3 yrs domain experience (SAP experience also works)
2, MBA, BE or equivalent techical degree
3, Good Technical knowledge
As you are fresher into industry, i suggest you to get min 1 to 2 yrs domain experience.if you have domain experience than this will help u more to understand Domain process with SAP ERP process.
When u finish your SAP training, every organization will ask about domain and SAP expeience . If not than entry level is difiicult.
If you have BE or any technical degree, the technical module will be good. But if you have 3 years domain experience in Sales, the functional module will be good. Again it is only depends on your interest that what you like the most? business process or technical process?
The Sales and Distribution (SAP SD) consists of all master data, system configuration, and transactions to complete the Order to Cash process. It includes the following information and processes:
Customer Master and Material Master data
Sales Orders
Deliveries
Pricing
Billing
Credit Management
SAP SD (Sales and Distribution) is known as one of the largest and oldest functional Modules of SAP. SAP SD is used to perform day to day business transactions & can handle all the processes from an Order to delivery. The main operations of this module are RFP (request for proposal), Customer Sales Orders Processing, Pricing, Picking (and other ware house processes), Packing, Billing, Risk management and Shipping.
All the Best!!
Similar Messages
-
B.E. Comp.+SAP Basis Admin Fresher with 6+ IT exp
I have completed my SAP Basis 4.7 from a premier instt. of Mumbai.
I am B.E. Comp.SAP Basis Admin Fresher with 6 IT exp.
Looking a SAP Basis Job in any location
I would appriciate very much to them who assist me for same..
Regards
Nilanchal
[email protected]Hi Nilanchal,
As per my knowledge there are numerous openings in BASIS area. Post your CV on various job portal and search for job over there. You can also contact different placment consultancy located in Mumbai for you help. Also visit career section of SAP if there is any opening. There are many companies in Mumbai/Pune which are in SAP domain and there must be openings for BASIS guys. I doubt that anyone here can provide you name of the company where openings are.
The best way is job portal to look for openings.
All the best.
Regards,
Subhasha Ranjan -
SAP GRC for Enterprise Architecture - Synergies and Gaps
Hi to all the Experts out there , I am a Freshie, Just Certified in TERP10 (Business Process Integration(, am doing Masters at Brunel University and the Dissertation topic I am working on is "SAP GRC for Enterprise Architecture - Synergies and Gaps ", and it involves unbiased exploration of SAP Solution for Governance Risk and Compliance for Enterprise Architecture, I request you all to contribute any related Information and or documentation for "SAP GRC" which can help me establish synergies for an Enterprise Architects perspective and gaps if any found.
Hi
You can find the basic documentation and whitepapers on GRC @
http://www.sap.com/solutions/sapbusinessobjects/large/governance-risk-compliance/index.epx
Which may help you in your study.
Regards
Swarna -
ANN: SAP GUI for Java 7.00 available for download
Hi all,
SAP GUI for Java 7.00 is now available at
ftp://ftp.sap.com/pub/sapgui/java/700/ and
http://service.sap.com/sapgui-java
This version includes support for J2SE 5.0.
Also it is the first version which can run on Intel-based Macs (for now for test and evaluation purposeds only, see included "Test and Evaluation Agreement")
For enhancements, new features and bug fixes, please refer to the release notes that can be found in the installers and the separate manual.
Please refer to SAP note 954572 for supported platforms.
(http://www.service.sap.com/%7Eform/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=954572&_NLANG=E)
Best regards
Rolf-MartinDear Rolf-Martin,
I have problem w/ sapgui java that puzzled me all along ...
I've downloaded SAPGUI Java 700r2.1 .. then successfully installed in my PPC ibook G4 ... up and running well ...
one day my colleague with a new MacBook (Intel Core Duo 2GHz) want to have SAPGUI ...
i installed it, run the apps, it works well to the point of SAPLOGON window ...
But it cannot connect to any server defined ...
When I create a new connection, it correctly connected to server and group list can be chosen, but still when I click it to connect nothing happened as if the program not running.
Java -version is 1.5.0_07 .. software update checked, no issue with Java or else ...
I've also try to change the JDK to 1.4.2 to no avail.
I'm stuck. system already re-installed. install sapgui from fresh but problem still persist.
No clue from Googling ... no clue from sapnotes ...
Would you please point me to something so I can dig in ?
Regards,
+++Isa sends -
Issue in SAP CPS for Job Interception
Issue in SAP CPS for Job Interception
Scenario:
After triggering a Process Chain in BW and maintaining the Job Interception settings in SAPCPS(Redwood)
(so that any job which triggers in BW by that Particular User is intercepted and not let it proceed further until the job is released in SAP CPS.)
Issue:
The Jobs are getting into Waiting status in SAP CPS(Redwood) even though there is no progress in loads in BW side. Also the Jobs are in Intercepted state even after releasing the Parent Job in SAP CPS(Redwood).
Please let us know how to go about it.Hi Ramesh,
What you plan to do is called monitoring of process chains (ie. process chains not started from CPS) and this should be available in the latest version of CPS.
This requires the interception of only the BI_PROCESS_TRIGGER process, just as you have configured now, and other than that the following prerequisites:
SAP Note 1080558 describes the SP levels for the BW/BI releases
XBP 2.0 or higher
Redwood transport files must be loaded
ProcessServerService.SAP.XBPVariant license key
Maybe this helps,
Anton. -
Unable to Print Purchase order automatically using SAP GUI for JAVA
Hi SAP gurus,
Some of the PC's in our company use windows and some LINUX. Therefore we use two types of SAP GUI. One for windows and the other one JAVA. PO approval was set to print automatically. In a windows setting, there are no problems with this setup. But in SAP GUI for JAVA, no print outs are produced and no error messages are displayed. I am using SAP GUI for JAVA version 7.10 ver 6. and I use Front end printing for linux access method G.
please help,
gungertzhi gungertz,
You can use U type access method for printing SAP document using linux desktop.
Please refer to my blog posting here (http://sapbasis.wordpress.com/2007/08/23/print-sap-documents-using-linux/)
ardhian
http://ardhian.kioslinux.com
http://sapbasis.wordpress.com -
Sap notes for 103 movement type and 105 movement types in sap
Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit -
SAP Tables for Open Customer Orders and Sales History
Dear Experts.
I am looking to get SAP SD related tables for the following,
1) SAP tables for Open Customer Orders
From SAP, I need to get all tables that Contain all open customer orders for products.
2) Sales History
From SAP, I need to get all tables that contain the previous month's sales history (shipped customer orders).
Please Help!!hi
check the following link
http://www.erpgenie.com/abap/tables_sd.htm
hope it will help you
regards,
sreelatha gullapalli -
Shift+F2 not working in SAP GUI for ITS
Hi,
In my transactional iview (SAP GUI for ITS) , in one of the screens, shift+F2 is not working(Which in turn opens graph for the report) The same is working fine in SAP GUI for html.
How can i make this work?
Also, can i have a document with the comparision of SAP GUI for html & SAP GUI for ITS, specifying its advantages and dis-advantages as well?..
Pls treat this query as urgent and respond ASAP.
Thanks in advance,
KavithaITS THE PROBLEM IN DEV NOT IN PROD ECC SYS
-
What is the new sap note for Ptax slabs of FY 2011-12.
Dear Experts,
we are currently using ECC 6.0, release 604, patch level 0035 and support package SAPKE60435. professional tax slabs not updated in table V_T7INP4.
what is the new sap note for Ptax slabs of FY 2011-12.Hi,
The Profession Tax tables T7INP3 & T7INP4 are customizing tables in which the entries are to be modified. SAP provides the initial entries and, if there is any change in slab rates, then you would need to update these slabs manually.
Please delimit the slab code in table T7INP3 and then create a new slab code entry from the date of delimition for the new rates in table T7INP4.
Regards,
Nishtha -
Error during DatabaseCopy using SAP tools for SQL Server (v7.12)
I'm trying to perform a system copy from PRD to QAS. The database has been mounted to QAS via detach and attach method. I did a DBCC on the database and everything looks OK. I'm running SAPINST (SAP Tools for MSSQL) and selecting the Database Copy option. The source database has a schema of DBO. Both PRD and QAS are running SAP 4.7/Basis 620. The target schema is QAS. SAPINST fails in step 2 (Define Params) with:
"This service cannot be used for a system with SAP ABAP release 620"
Is this message misleading? Has anyone receive this message before.
UPDATE:
I donwloaded the latest version of SAP Tools for MSSQL and now it failes during the execution phase on step, "Convert DB objects to new schema".
Here is the log:
Process environment
===================
Environment Variables
=====================
=::=::\
=C:=C:\Program Files\sapinst_instdir\MSS\CPY
ALLUSERSPROFILE=C:\Documents and Settings\All Users
APPDATA=C:\Documents and Settings\r3tadm.STAG\Application Data
CLIENTNAME=TRAIMONOTEBOOK
ClusterLog=C:\WINDOWS\Cluster\cluster.log
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=STAG
ComSpec=C:\WINDOWS\system32\cmd.exe
DBMS_TYPE=MSS
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\r3tadm.STAG
LOGONSERVER=
STAG
MSSQL_DBNAME=R3T
MSSQL_SERVER=stag
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Dell\SysMgt\RAC5;C:\Program Files\Dell\SysMgt\oma\bin;C:\Program Files\Dell\SysMgt\oma\oldiags\bin;C:\Program Files\Microsoft SQL Server\80\Tools\BINN;C:\usr\sap\R3T\SYS\exe\run
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 6, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=0f06
ProgramFiles=C:\Program Files
SAPINST_EXEDIR_CD=C:/STM/I386
SAPINST_JRE_HOME=C:/WINDOWS/TEMP/3/sapinst_exe.3012.1234409473/jre
SAPLOCALHOST=stag
SESSIONNAME=RDP-Tcp#25
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\WINDOWS\TEMP\3
TMP=C:\WINDOWS\TEMP\3
USERDOMAIN=STAG
USERNAME=r3tadm
USERPROFILE=C:\Documents and Settings\r3tadm.STAG
windir=C:\WINDOWS
User: STAG\r3tadm, Id: S-1-5-21-2727398557-1322528747-1943968026-1019
Working directory: C:/Program Files/sapinst_instdir/MSS/CPY
Current access token
====================
Could not get thread token. Last error: 1008. I assume that no thread token exists.
Got process token.
Privileges:
Privilege SeBackupPrivilege, display name: Back up files and directories, not enabled.
Privilege SeRestorePrivilege, display name: Restore files and directories, not enabled.
Privilege SeShutdownPrivilege, display name: Shut down the system, not enabled.
Privilege SeDebugPrivilege, display name: Debug programs, not enabled.
Privilege SeAssignPrimaryTokenPrivilege, display name: Replace a process level token, not enabled.
Privilege SeSystemEnvironmentPrivilege, display name: Modify firmware environment values, not enabled.
Privilege SeIncreaseQuotaPrivilege, display name: Adjust memory quotas for a process, not enabled.
Privilege SeChangeNotifyPrivilege, display name: Bypass traverse checking, enabled.
Privilege SeRemoteShutdownPrivilege, display name: Force shutdown from a remote system, not enabled.
Privilege SeTcbPrivilege, display name: Act as part of the operating system, not enabled.
Privilege SeUndockPrivilege, display name: Remove computer from docking station, not enabled.
Privilege SeSecurityPrivilege, display name: Manage auditing and security log, not enabled.
Privilege SeTakeOwnershipPrivilege, display name: Take ownership of files or other objects, not enabled.
Privilege SeLoadDriverPrivilege, display name: Load and unload device drivers, not enabled.
Privilege SeManageVolumePrivilege, display name: Perform volume maintenance tasks, not enabled.
Privilege SeSystemProfilePrivilege, display name: Profile system performance, not enabled.
Privilege SeImpersonatePrivilege, display name: Impersonate a client after authentication, enabled.
Privilege SeSystemtimePrivilege, display name: Change the system time, not enabled.
Privilege SeCreateGlobalPrivilege, display name: Create global objects, enabled.
Privilege SeProfileSingleProcessPrivilege, display name: Profile single process, not enabled.
Privilege SeIncreaseBasePriorityPrivilege, display name: Increase scheduling priority, not enabled.
Privilege SeCreatePagefilePrivilege, display name: Create a pagefile, not enabled.
Groups:
Group count: 14
\LOCAL S-1-2-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Administrators S-1-5-32-544 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_OWNER
\Everyone S-1-1-0 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
BUILTIN\Users S-1-5-32-545 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1021 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_LocalAdmin S-1-5-21-2727398557-1322528747-1943968026-1023 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\None S-1-5-21-2727398557-1322528747-1943968026-513 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\INTERACTIVE S-1-5-4 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\NTLM Authentication S-1-5-64-10 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\Authenticated Users S-1-5-11 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
\ S-1-5-5-0-36828865 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED SE_GROUP_LOGON_ID
NT AUTHORITY\REMOTE INTERACTIVE LOGON S-1-5-14 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
NT AUTHORITY\This Organization S-1-5-15 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
STAG\SAP_R3T_GlobalAdmin S-1-5-21-2727398557-1322528747-1943968026-1018 Attributes: SE_GROUP_MANDATORY SE_GROUP_ENABLED_BY_DEFAULT SE_GROUP_ENABLED
ERROR 2009-02-11 19:31:46.529 [sixxcstepexecute.cpp:984]
FCO-00011 The step MoveSchema with step key |SAPMSSTOOLS|ind|ind|ind|ind|0|0|MssSysCopy|ind|ind|ind|ind|4|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
TRACE 2009-02-11 19:31:46.544
Call block:CallBackInCaseOfAnErrorDuringStepExecution
function:CallTheLogInquirer
is validator: true
WARNING 2009-02-11 19:31:46.544 [iaxxejshlp.cpp:150]
Could not get property IDs of the JavaScript object.
ERROR 2009-02-11 19:31:46.544 [iaxxejsctl.cpp:492]
FJS-00010 Could not get value for property .
TRACE 2009-02-11 19:31:46.544
A problem occurs during execution the inquirer callback. SAPinst will switch back to the standard behaiviour.
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:707]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP Toools for MS SQL Server > Database Copy. You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/MSS/CPY. </p> </body></html>
TRACE 2009-02-11 19:31:46.544 [iaxxgenimp.cpp:1245]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
Edited by: Tony Raimo on Feb 12, 2009 4:37 AMThis is looks like permission issue on source folder
Copy source in to your local drive and try again.
I had same issue and able to resolve after copy EXP1 EXP2 and EXP3 folder in to local drive C: with Everyone full access
Yogesh -
SAP Exit for Current Posting Period
H All,
I am executing a query and it should always take the Current Fiscal Year & Current period into consideration. I don't see any Standard SAP exit which is provided for this. There is an SAP exit for Fiscal year/Period but I need both of them seperately. Can anyone please provide a sample code for "Current posting period".
Points will be assigned!
Thanks a lot!Hi Sia
Here is some cmod code that might help:
These should be run in i-step = 1
DATA: l_period TYPE t009b-poper,
l_txt4(4) TYPE c.
*Variable ZCCCFYEAR that defauts to current Fiscal Year
WHEN 'ZCCCFYEAR'.
l_txt4 = syst-datum(4).
l_period = syst-datum+4(2).
*Handles FiscVarnt, period 6 is end of year so period 7 is new year
IF l_period > '06'.
l_txt4 = l_txt4 + 1.
ENDIF.
l_s_range-low = l_txt4 .
l_s_range-high = ''.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
*Variable ZCCPPER that defauts to current Posting Period
Code adds 6 to current year period to be inline with Fiscal Year Variant (ie.per1 = july(7)),
WHEN 'ZCCPPER'.
l_period = syst-datum+4(2) + 6.
IF l_period > 12.
l_period = l_period - 12.
ENDIF.
l_s_range-low = l_period.
l_s_range-high = ''.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
APPEND l_s_range TO e_t_range.
Hope this helps
Josh -
ANN: SAP GUI for Java 7.10 available for download
Hi all,
SAP GUI for Java 7.10 is now available at <b>http://service.sap.com/sapgui-java</b>.
In case you are not registered on service.sap.com, you can alternatively download it from ftp://ftp.sap.com/pub/sapgui/java/710.
<b>New platforms:</b>
- JSE 6: See System Requirements of platforms for details. Also, usage of JRE 1.4.2 is no longer supported.
- Microsoft Windows Vista (Business and Ultimate editions)
- Mac OS X 10.5 (once the test on the final build of "Leopard" has been successfully completed, see <a href="https://service.sap.com/sap/support/notes/959236">Note 959236</a> for latest news)
- HP-UX 11.31
<b>New features:</b>
- <b>Input History: </b>Text previously entered in an entry field is available in a dropdown listbox when the same entry field is reaccessed.
- The <b>installer</b> now can be launched directly from a write-protected directory and the installation process completes considerably faster.
- The <b>Preference Dialog</b> has been redesigned.
- <b>Dynpro Splitter:</b> The feature to display two subscreens divided by a horizontal or vertical splitter has been implemented.
<a href="https://service.sap.com/sap/support/notes/959236">Note 959236</a> lists the supported platforms and will include latest news on support for Mac OS X 10.5 (Leopard).
Best regards
Rolf-MartinHello Mac users,
ANN: SAP GUI for Java 7.10 rev 1 available for download officially supports Leopard.
Best regards
Rolf-Martin -
In case of problems with SAP GUI for Java ...
Hello all,
in case of having problems (errors, ABAP dumps etc.) with SAP GUI for Java, please create an OSS message on component BC-FES-JAV with information described in OSS note 326558
http://www.service.sap.com/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700010521522001.
This makes sure our official support channels get aware of your problem.
Thanks and best regards
Rolf-MartinHello Rolf-Martin,
i don't have access to this website to view the note.
The version of the Suse libc is:
GNU C Library stable release version 2.3.2, by Roland McGrath et al.
Copyright (C) 2003 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
Compiled by GNU CC version 3.3 20030226 (prerelease) (SuSE Linux).
Compiled on a Linux 2.4.20 system on 2003-03-13.
Best Regards,
Piotr Brostovski -
Config issue in SAP AMI for triggering XML
Hi,
We have configured the AMI. Also setup the AMI enabled devices.
We have created Meter Reading Orders for the periodic meter reading as bulk .
But the creation of MROs does not trigger creation of XML messages.
We found the Enterprise Service responsible for meter reading order Request Smart Meter Meter Reading Document Creation as Bulk SmartMeterMeterReadingDocumentERPBulkCreateRequest_Out
But the XML messages are not getting generated on MRO creation. Also no XML message generated on AMI enabled device creation.
I could go into SXMB_MONI with date and time stamp to view the XML message, not able to view the XML.
Is there any thing specific needs to be configured to have the XML message in SXMB_MONI
The process we are following is we are creating periodic meter reads and using the transaction ELMU/EL35 Customized to our needs to trigger the SmartMeterMeterReadingDocumentERPBulkCreateRequest_Out . Are we following the right approach.
Is it the right transcation code to trigger the Enterprise service and what are the parameters to be passed.
Thanks,
Vijay.
Edited by: vijay gunti on May 28, 2010 8:50 AMhello,
The meter reading process in SAP AMI for bulk order is different then single meter reading order. First step is create meter reading order by Transaction code EL09. It will not create enterprise service. The status of meter reading order will be suppressed when you view status by transaction EL31. After meter reading order creation, run transaction EL35 to download meter reading order. After running this transaction, it will create enterprise service and update meter reading order status to Meter reading request sent. At this stage, meter reading order will move to MDUS system.
Give me shout if you have any questions.
Thanks
Shailesh
Maybe you are looking for
-
We have a tne of flash apps that all need the same preloader added. Problem is that the preloader look will change often. Can you have each app call on an external file as its preloader? That way, we only have to change the 1 external file. If so, wh
-
I took an existing jsp with a <frame> and <frameset>'s and put it in a portlet. Nothing showed up. Is this supposed to work or do the <frameset> url's get confused because they are in a porlet? Is there a working or special tag? thanks, gr
-
How can I buy more iCloud space when my ipad won't sync and has jammed
How can I buy more icloud space when my ipad won't sync and has jammed. I cannot press settings or close and cannot even turn off?
-
Hi, I have completed my 11g OCP in 2014, and I'm currently busy preparing for the 11g Performance Tuning Exam (1Z0-054). Seeing that Oracle 12c Certification is available, I would like to know the best route to get to 12c OCM. Do I need to first comp
-
Making movies play automatically on a slide in Keynote
I have a presentation that has still photographs on some slides and movies on some. I set the vids to start automatically but they only play a few seconds and then the next slide appears.