SAP SD LIS AND SIS UPDATION
HI Friends
Please guide me where we have to do the stting for get the Standard Report updations. (LIS AND SIS).Please Give me the configuration guie lines.
Regards,
Udhay
Hi,
pls. see the answer from Naren in the below link. hope that helps you.
/message/4035570#4035570 [original link is broken]
Br, Sats.
Similar Messages
-
Hi All,
How to configure LIS and SIS in sales and distribution?
Is there any need of abaper on this?
There are some transaction codes like MCTC,MCTE....etc are there. I am executing that transaction codes but not getting any result on this.
Please help me out.
Reward ponis for helpful answer.
Regards
AshisSIS is nothing but sales info system.
we are executing VA05 it fectches some data why it is fetching bcos of SIS configuration.
detailed SIS configuration is given below.
Standard SAP SD Reports:=
Statistic Group:
Purpose To capture data for Standard Reports, we require to activate Statistic Group as under:
--> Item category (Configuration)
--> Sales document type (Configuration)
--> Customer (Maintain in Master data)
--> Material (Maintain in Master data)
When you generate statistics in the logistics information system, the system uses the combination of specified statistics groups to determine the appropriate update sequence. The update sequence in turn determines for exactly which fields the statistics are generated.
Configuration:
IMG --> Logistics Information System (LIS) --> Logistics Data Warehouse --> Updating --> Updating Control --> Settings: Sales --> Statistics Groups -->
1. Maintain Statistics Groups for Customers
2. Maintain Statistics Groups for Material
3. Maintain Statistics Groups for Sales Documents
4. Assign Statistics Groups for Each Sales Document Type
5. Assign Statistics Groups for each Sales Document Item Type .....
All Standard Reports which are available are as under:
SAP Easy Access: Information Systems -> Logistics -> Sales and distribution ->
1. Customer -> Incoming orders / Returns / Sales / Credit memos / Sales activities / Customer master / Conditions / Credit Master Sheet
2. Material -> Incoming orders / Returns / Sales / Credit memos / Material master / ...
3. Sales organization -> Sales organization / Sales office / Sales employee
4. Shipping point -> Deliveries / Returns
5. SD documents -> Orders / Deliveries / Billing documents ...
& so on.
Some of the Standard reports in SD are:
Sales summary - VC/2
Display Customer Hierarchy - VDH2
Display Condition record report - V/I6
Pricing Report - V/LD
Create Net Price List - V_NL
List customer material info - VD59
List of sales order - VA05
List of Billing documents - VF05
Inquiries list - VA15
Quotation List - VA25
Incomplete Sales orders - V.02
Backorders - V.15
Outbound Delivery Monitor - VL06o
Incomplete delivery - V_UC
Customer Returns-Analysis - MC+A
Customer Analysis- Sales - MC+E
Customer Analysis- Cr. Memo - MC+I
Deliveries-Due list - VL04
Billing due list - VF04
Incomplete Billing documents - MCV9
Customer Analysis-Basic List - MCTA
Material Analysis(SIS) - MCTC
Sales org analysis - MCTE
Sales org analysis-Invoiced sales - MC+2
Material Analysis-Incoming orders - MC(E
General- List of Outbound deliveries - VL06f
Material Returns-Analysis - MC+M
Material Analysis- Invoiced Sales - MC+Q
Variant configuration Analysis - MC(B
Sales org analysis-Incoming orders - MC(I
Sales org analysis-Returns - MC+Y
Sales office Analysis- Invoiced Sales - MC-E
Sales office Analysis- Returns - MC-A
Shipping point Analysis - MC(U
Shipping point Analysis-Returns - MC-O
Blocked orders - V.14
Order Within time period - SD01
Duplicate Sales orders in period - SDD1
Display Delivery Changes - VL22
regrads,
kishore. -
Dear Experts,
Its been a long time since I touched on BW.
May I know is BW extraction for LIS and SIS different?
Any useful foundation info on these? I need to brush up on BI 7. Please help.
Have a nice day.
regards
JohnDear Experts,
Its been a long time since I touched on BW.
May I know is BW extraction for LIS and SIS different?
Any useful foundation info on these? I need to brush up on BI 7. Please help.
Have a nice day.
regards
John -
Cannot open cmc sap authentication - role and alias update failing
I have two business objects environments. For two of them I am failing to login to a specific part of CMC.
I want to go to Authentication tab, SAP authentication. The page is not opening.
I have on both environments 500.000 + Failed jobs. (settings - view global system metrics).
I have the feeling my CRYSTAL user account's password has expired and the 500k+ failed schedules are due to the scheduled update of roles and aliases which is failing.
Can anybody tell me how to cleanup these 500k events, and hopefully being able to access my sap authentication again (and update the password for crystal user? They cannot be deleted from instance manager.
Any help is appreciated. Thanks!Dear Seb. I tried. No result. Let me share some screenshots to desribe my issue.
what did I also try: redeploying BOE webapplication. Without success.
My question is: how do I remove these failed instances from the system? Because I think that is a start of the solution.
.. the admintoos entry (from upgrade management tool) was still increasing... It runs awfully long. -
Synchronous and Asynchronous updating in LIS
Dear experts
What is the difference between
Synchronous and Asynchronous updating in LIS ?
There are three radio buttons for ASYNCHRONOUS UPDATING [1],[2],[3]
What is the significanse of each of them?
Regards
SiddharthHi siddarth
Difference between synchronous update & asynchronous update
Synchronous update -Immediate start, i.e., when an event takes place that triggers an update
Asynchronous update - Delayed start, i.e., updating is slightly delayed after an event that triggers an update
Regards
Srinath -
SAP List of Supported SQL Server Service Packs and Cumulative Updates
Does SAP provide a list of SQL Server Service Packs and Cumulative Updates that will work with BPC 7.0 and 7.5? I see that CU 12 is out for SP1 and CU 2 is out for SP2. I would like to know if I can move the SP2 CU2 or SP1 CU12. My install docs are outdated specifying SP1 CU6.
Any direction is appreciated.
JoeHi,
Please take a look at the below list of the supported OS: This excerpt is from the installation guide.
SP04 or later: Windows Server 2008 R2 Standard or Enterprise Edition with or without Hyper-V
Windows Server 2008 Standard or Enterprise Edition with or without Hyper-V, or
Windows Server 2008 Data Center with or without Hyper-V
Windows Server 2003 Standard or Enterprise Edition SP2
Windows Server 2003 Standard configured on the SQL database or OLAP server components only
Windows Server 2003 R2 Standard or Enterprise Edition SP2
SAP recommends using Windows Server 2008 64 bit over Windows Server 2003 64 bit. Otherwise, supportability is limited.
I am not sure what did you mean by the front end. Having said that, 32 bit is supported both on the server and the client machines.
Hope this helps. -
ADOBE Forms attachment to SAP object (Order) and updating it
Hi,
I have the following scenario:
I need to attach a PDF document to a PM order. This can be achieved using the standard feature of attaching documents to SAP Objects. The requirement is to open the same attached document and update it by entering some information ( for example checking some check boxes) . After updating the document, it is again attached back to the PM order.
I would like to know if I can use Adobe forms in this scenario to:
- Design the PDF as per customer requirement
- Make changes in the PDF. (Please note that this data is not saved in any SAP application database)
- Attach the updated PDF again to the PM order
Thanks,
Arvind KulkarniHi Arvind,
Please go through the below blog:
Demystifying Attachments in PDF in WD Abap Application Part II
Regards,
Vaibhav -
Hi All,
Could someone please send me some information regarding LIS extraction and Generic extraction.
Thanks in advance,
SekharHi Sekhar,
Please do check the link for step by step for generic xtraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
(navigate with expand left nodes)
also co-pa
http://help.sap.com/saphelp_nw04/helpdata/en/53/c1143c26b8bc00e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fb07ab90-0201-0010-c489-d527d39cc0c6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1910ab90-0201-0010-eea3-c4ac84080806
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ff61152b-0301-0010-849f-839fec3771f3
LO Extraction
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Check these links:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Re: LO-Cockpit V1 and V2 update
Also Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
FI-CO 'Data Extraction -Line Item Level-FI-CO
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a7f2f294-0501-0010-11bb-80e0d67c3e4a
FI-GL
http://help.sap.com/saphelp_nw04/helpdata/en/c9/fe943b2bcbd11ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_470/helpdata/en/e1/8e51341a06084de10000009b38f83b/frameset.htm
http://www.sapgenie.com/sapfunc/fi.htm
FI-SL
http://help.sap.com/saphelp_nw2004s/helpdata/en/28/5ccfbb45b01140a3b59298c267604f/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/41/65be27836d300ae10000000a114b54/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ee/cd143c5db89b00e10000000a114084/frameset.htm
How to do basic LO extraction for SAP-R3-BW
1. Go to transaction code RSA3 and see if any data is available related to your DataSource. If data is there in RSA3 then go to transaction code LBWG (Delete Setup data) and delete the data by entering the application name.
2. Go to transaction SBIW --> Settings for Application Specific Datasource --> Logistics --> Managing extract structures --> Initialization --> Filling the Setup table --> Application specific setup of statistical data --> perform setup (relevant application)
3. In OLI*** (for example OLI7BW for Statistical setup for old documents : Orders) give the name of the run and execute. Now all the available records from R/3 will be loaded to setup tables.
4. Go to transaction RSA3 and check the data.
5. Go to transaction LBWE and make sure the update mode for the corresponding DataSource is serialized V3 update.
6. Go to BW system and create infopackage and under the update tab select the initialize delta process. And schedule the package. Now all the data available in the setup tables are now loaded into the data target.
7.Now for the delta records go to LBWE in R/3 and change the update mode for the corresponding DataSource to Direct/Queue delta. By doing this record will bypass SM13 and directly go to RSA7. Go to transaction code RSA7 there you can see green light # Once the new records are added immediately you can see the record in RSA7.
8.Go to BW system and create a new infopackage for delta loads. Double click on new infopackage. Under update tab you can see the delta update radio button.
9.Now you can go to your data target and see the delta record.
find your scenario and find what data sources do you need on R3 side and ensure they are active as well:
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
find your scenario -> data sources -> go to R3 -> sbiw and activate required data source
replicate data sources in BW:
RSA1 -> source systems -> right click on your source system -> replicate
then activate your BC:
service.sap.com/bi -> BI Business Content -> General Information -> SAP BW Business Content - Activation
and execute infopackage (it should be delivered with BC)
Useful links:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
service.sap.com/bi -> BI InfoIndex
sdn.sap.com -> Business Information Warehouse -> How-To guides (under Quick Links)
Hope This Helps.
****Assign Points If Helpful****
Regards,
Ravikanth -
Can anyone explain briefly What is LIS and LO?
hai sapbw-gurus,
Can anyone explain briefly What is LIS and LO?
what is the different b/w LIS and LO?
how u will create these two in sap bw?hi,
LIS is old technique through which we can load the data. Here we use typical delta and full up-loading techniques to get data from an logistics application, it uses V1 and V2 update, it means that it was a synchronous or asynchronous update from the application documents to LIS structures at the time when the application document was posted.
LO Cockpit is new technique i think from bw 3.0 ( i am not sure) which uses V3 which is an update that you can schedule, so it does not update at the time when you process the application documents, but it will be posted at a later stage.
Another big difference between LO and LIS is that,
You have separate datasources for header level, item level and schedule line level available in LO, you can choose at which level you want to extract your data and switch off others, which results in reduced data.
we do not have this flexibility with LIS structures
with Plug-In 2001.2 S2xx-Structures have been replaced by Logistics Extraction Cockpit. However, R/3 releases 4.x support S2xx-Structures and Logistics Extraction Cockpit in parallel.
With new LBWE extractors there are a lot of benefits:
- Detailed Extraction: extraction can be deactivated (e.g. Schedule Line Data) leads to leaner extractors with less volume.
Document Changes: only BW-relevant data changes will be updated (less upload volume).
- LIS-Tables are not updated reduced data volume due to avoided redundancy.
- Update with Batch-Process (V3) -> no load on daily business (but now there are available different delta methods as the direct delta...)
- No LIS-Know How necessary.
- Functional Enhancements easy to be done.
- Central, uniform maintenance tool for logistics applications (LBWE)
- No Delta-Tables (SnnnBIW1/-2) no double update, no double Data-Storage
- A lot of flows are covered: Purchasing,Inventory Controlling, Shop Floor Control, Quality Management, Shipment, Sales, Shipping, Billing, Plant Maintenance, Customer Service, Retailing....
LOGISTIC COCKPIT DELTA MECHANISM - Episode one: V3 Update, the serializer
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
LOGISTIC COCKPIT DELTA MECHANISM - Episode two: V3 Update, when some problems can occur...
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
LOGISTIC COCKPIT DELTA MECHANISM - Episode three: the new update methods
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
LOGISTIC COCKPIT - WHEN YOU NEED MORE - First option: enhance it !
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
differences between LO and LIS
hope it helps,
regards,
partha -
i have configured lis and created new info structure for deliveries s502 but in that structure data is not getting uploded
Please tell me what all the possible reasons for this
Thanks n regards
SiriHi Siri,
Try using OMO1 for updating control of SIS.
After this, if you are trying to view the old data then u need to populate the old data using few transaction.
To populate old data in the newly created SIS Structure use transactions, OLI7, OLI8 & OLI9.
Hope this resolves your issue.
Regards,
Dnyandeo H. Ainarkar -
hI,
What are the v1 and v2 updates. how do you call
UPDATE FUNCTION MODULE.
regards
ram.V1 and V2 are workprocesses in which corresponding update bundles (by using calls to corresponding update FMs) are executed.
V1 is for primary updates (like txnl tables) while V2 is used for secondary (eg statistical LIS) updates.
You call an update FM in such task with
"call function ' ' in update task ..."
More details at http://help.sap.com/saphelp_nw04/helpdata/en/e5/de86f335cd11d3acb00000e83539c3/frameset.htm
cheers,
Ajay -
hello,
any body can tell me about difference between lis and los with examples pls
and also
about v3 update
direct delta
queud delta
serialised v3
unserialised v3Hi
pls check the link below
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Where is tables "SnnnBIW1 & SnnnBIW2"
THANKS=POINTS IN SDN
SANJEEV KUMAR HAMSALA -
Need to clear concepts in V1,V2 and V3 updates. see the scenarios
please refer to this thread and help.....
want to know whether my concepts about V1,V2 and V3 are correct or notHi John,
When we extract data from SAP using LIS, we can use V1 or V2 update. In LO extraction, we use V3 update. In most of the business scenarios, Only LO extractors are used and no LIS. As you asked,
V1 - Synchronous update
V2 - Assynchronous update
and
V3 - Assynchronous Background
We can schedule a periodic job for V3 update which runs in background without user interaction.
Regards,
Shashi -
SAP ECC6 memory and paging issues
Dear Experts
I have recently upgraded my 4.6C systems to an ECC 6 system (DB2 LUW 9.5 on AIX 5.3 TL9 64 Bit OS)
I have been running the LPAR with 14 GB of memory and we are around 100-200+ users using the system, I was monitoring using nmon and found that Physical Memory was around 99.8% Used (14311.8MB and 22.6MB was free) also the paging space was around 37.2% in result causing the system at times to run slow which can have a very negative effect on the users.
After further investigation I found that after a system restart the Physical Memory would start around 50.9% and increased at a steady pace until it reached 99.8% that is when the system would start using the paging space which would steadily increase, I found that the only solution was a system restart at least once a week to reduce the memory consumption.
At first glance it looked like a database manger memory leak with the process db2sysc, so I searched the net with the search words u201Cdb2 memory leaku201D and found the following APARs and notes.
APAR JR30285 - Pervasive memory leak when compiling SQL statements that use SQL/XML functions
APAR IZ35230 - There is a pervasive unix-specific private memory leak in the security component
Note 1288341 - Memory leak in APPLHEAPSZ -> SQL0954C
Note 1352361 - Memory leak in shared memory area abrfci
Note 1147821 - DB6: Known Errors and available Fixes in DB2 9.5 LUW
After reading the notes and APARs I decided to updated DB2 to the latest fix pack (5SAP), but after the fix pack was implemented it did not solve the memory problem
I started look at different problems with SAP ECC6, db2 and AIX with paging/memory problems and I found the following notes to do with AIX memory and paging but none of them helped as all parameters and settings were set accordingly
789477 - Large extended memory on AIX (64-bit) as of Kernel 6.20
191801 - AIX 64-bit with very large amount of Extended Memory
973227 - AIX Virtual Memory Management: Tuning Recommendations
884393 - AIX saposcol consumes large amount of memory.
856848 u2013 AIX Extended Memory Disclaiming
1048686 u2013 Recommended AIX settings for SAP
1121904 u2013 SAP on AIX: Recommendations for Paging
1086130 u2013 DB6: DB2 Standard Parameter Settings
After even more investigation I found the following evidence suggesting AIX Virtual Memory Manager might have a problemShared memories inside of pool 40
Key: 42 Size: 17792992 ( 17.0 MB) DB TTAB buffer
Key: 43 Size: 53606392 ( 51.1 MB) DB FTAB buffer
Key: 44 Size: 8550392 ( 8.2 MB) DB IREC buffer
Key: 45 Size: 7014392 ( 6.7 MB) DB short nametab buffer
Key: 46 Size: 20480 ( 0.0 MB) DB sync table
Key: 47 Size: 10241024 ( 9.8 MB) DB CUA buffer
Key: 48 Size: 300000 ( 0.3 MB) Number range buffer
Key: 49 Size: 2769392 ( 2.6 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key: 3 Size: 114048000 ( 108.8 MB) Disp. communication areas
Key: 4 Size: 523048 ( 0.5 MB) statistic area
Key: 6 Size: 692224000 ( 660.2 MB) ABAP program buffer
Key: 7 Size: 14838 ( 0.0 MB) Update task administration
Key: 8 Size: 134217828 ( 128.0 MB) Paging buffer
Key: 9 Size: 134217828 ( 128.0 MB) Roll buffer
Key: 18 Size: 1835108 ( 1.7 MB) Paging adminitration
Key: 19 Size: 119850000 ( 114.3 MB) Table-buffer
Key: 41 Size: 25010000 ( 23.9 MB) DB statistics buffer
Key: 63 Size: 409600 ( 0.4 MB) ICMAN shared memory
Key: 64 Size: 4202496 ( 4.0 MB) Online Text Repository Buf.
Key: 65 Size: 4202496 ( 4.0 MB) Export/Import Shared Memory
Key: 1002 Size: 400000 ( 0.4 MB) Performance monitoring V01.0
Key: 58900114 Size: 4096 ( 0.0 MB) SCSA area
Nr of operating system shared memory segments: 16
Shared memory resource requirements estimated
================================================================
Total Nr of shared segments required.....: 16
System-imposed number of shared memories.: 1000
Shared memory segment size required min..: 692224000 ( 660.2 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 1654.8 MB
..in pool 10 328.6 MB, 58% used
..in pool 40 143.3 MB, 30% used
..not in pool: 1174.1 MB
Processes........................: 413.4 MB
Extended Memory .................: 6144.0 MB
Total, minimum requirement.......: 8212.2 MB
Process local heaps, worst case..: 3814.7 MB
Total, worst case requirement....: 21882.9 MB
Errors detected..................: 0
Warnings detected................: 3 -
What is the diffrence between LIS and LO Cockpi
Hello All,
What is the diffrence between LIS and LO **** pit.
Regards,
LisaHi Lisa,
take a look to my weblog to have more info...
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
Hope it helps!
Bye,
Roberto
Maybe you are looking for
-
Need to have the calendars on my iPhone to show up in iCal on my Mac.
Today I was at the area Apple store working with a Genius. I had two Apple IDs, one I had used for some time and a second created when I set up a Mobile Me account a couple of years ago. Because I had two IDs, syncing was all messed up. The genius le
-
Trash cannot delete file in use
I occasionally have troubles deleting files from the Trash because the message says that the files are still in use, even though I haven't got any applications open. One of the main features that convinced me to upgrade to Snow Leopard was that it wo
-
Worries about adding Essentials Roles to 2012 STD
Hello!<o:p></o:p> This is my first real? Here so I would like to just say, with all that I have read, learned from this forum it has been a big help in the past, I’m sure it will continue to be in the future, with that said.<o:p></o:p> When I first s
-
Incoming Payment Check No. field not editable directly
SBO 2007A, PL 42 Banking >> Incoming Payments >> Payment Means When I am entering an incoming check from a customer, on the Payment Means window, I can't click in the Check No. field and enter data, but if I tab over it to it from the amount field, I
-
On time Payment - Customer Discount
Hi All, We are generating the invoice and sending it to the customer. Now we expect the customer to pay for it. We have a policy in our company, like if the customer pays on time or before a cut off date then the customer is eligible for discounts. T