SAP SD Microsoft MPP

Hi,
Could you please any one give me some stuff regarding SAP SD interface with Microsoft Project Plan. We used to create Project structures in MPP and the same in SAP SD also. Is there any interface given by SAP?
Wishes,
Abhishek

Hi
Check this third party tool.
http://www.theprojectgroup.com/downloads/SAP_Microsoft_Congress_2003_e.ppt

Similar Messages

SAP PS - Microsoft MPP

Hi all of you,
Could you please any one give me some stuff regarding SAP PS interface with Microsoft Project Plan. We used to create Project structures in MPP and the same in SAP PS also. Is there any interface given by SAP?
Please give me your inputs regarding
Regards
Ramki

Yes, there is a std tool available with SAP..it is called OPENPS...

Error in sending mail from SAP to microsoft outlook

Hi all.
Greetings.
I have a requirement to send mail from SAP to Outlook.
SMTP is configured here....i have checked the steps.
I am using FM "SO_NEW_DOCUMENT_SEND_API1" to send the mail text.
when i check the SOST Tcode i got message "Wait for communications service".
after evry 10 minutes the sap connect all process runs..as it is configured in SCOT transaction, but even after 30 minutes the mail is not sent.
I don't know how should i check the error message?
tell me the checking stepls plz?...how should i step through in checking this?
what are the prerequsites for sending mails from SAP to Microsoft outlook?
regards
Prashant Tiwari
Edited by: prashant tiwari on Feb 6, 2009 10:26 AM

Hi prashant,
Pls refer to the link below:
Re: Inbound Email- SAP Connect
or
check your userid .
If not correct no mail will go from u r id.
Try it with another user id.
or try using the following function module
'SO_NEW_DOCUMENT_ATT_SEND_API1'
I Hope this helps you with the issue.
Thanks
Ravi Aswani

Running SAP on Microsoft Virtual Servers

Is anyone running SAP on Microsoft Virtual Servers? If so, what has been your experience with this? We are installing NetWeaver 2004s on three virtual servers (running on the same Physical Windows server). We are using the Microsoft Virtual Server software (not VM Ware).
Thanks in advance for any information.

Check Note 674851 - Virtualization on Windows:
VMware, GSX Server, VMware workstation, Microsoft Virtual Server
Due to their restriction to 32-bit, single CPU and host/guest operation, these virtualization products are not suitable for productive SAP applications.
It may be advisable to use one of these products to operate non-production systems (demo systems, test systems, development systems and so on).
I would not use Microsoft Virtual Server for productive installations, additionally, depending on the database used, it may or may not supported by the database vendor and thus also may or may not supported by SAP.
In worst case you will need to reinstall the application on a non-virtualized environment and reproduce a problem there before SAP support will accept the problem.
Markus

Integration of SAP with Microsoft ADS

how to integrate SAP with Microsoft ADS? also can anybody specify the API's need to be used to accomplish this???
can we use IUserMappingService or IUserFactory??can anyboby explain in detail?? so urgent

Hi James
Thanks for your reply.
This is my email id: [email protected]
As I wrote in my previous response, i would like to know whether we can use the standard UME API's to access MS ADS.
If you can send some sample code using the api's that would be of great help.
Thanks in advance.
Regards
YogaLakshmi

Sap to microsoft project

hi to all
is it so possible in standard SAP that what ever we plan in planning board can be exported to micro project?
if so, can u suggest me the steps...
if not, any interface software's are required???????? what is open PS, is it available in SAP or we have to procure it?
regards
surya

Hi Surya,
Yes it is possible the exchange data between the Project System (PS) and Microsoft Project. You can transfer data from Microsoft Project to the Project System, and from the Project System to Microsoft Project.
You need not to buy Open PS for Microsoft Project (OpenPS4MSP), it is to get downloaded from www.service.sap.com
For this refer below sdn link.
https://forums.sdn.sap.com/click.jspa?searchID=26500224&messageID=6229863
Also refer sap help link on Open PS for Microsoft Project (OpenPS4MSP)
https://help.sap.com/saphelp_ops40/helpdata/en/a6/a60d3876a6b610e10000009b38f8cf/frameset.htm
Regards,
Sandeep

Regardig SAP and Microsoft VB connection.

dear all
can anybody tell me how to integrate microsoft VB from SAP R/3.
i dont want vice versa.. i want to integrate VB application through SAP only..
regards,
jigar t

<b>Hi
If u want to integrate VB with SAP,Then its easy task for u if u know RFC and BAPI in SAP.
In VB u hv one component called BAPIActiveX controls which will help u to login to SAP thru SAP user ID and Password.
After that u have to create object type SAP business objects which is nothing but SAP BOR with BAPI.Then u have to Call BAPI thru that Object from VB which will invoke in SAP.
Take one example hw to create one Sales Order in SAP from VB
For creating Sales order one Business object is defined in SAP-BUS2032,U can see it in SWO1 Tcode in SAP.Then
U have create one object type in VB .
Then thru that Object u have to CALL one BAPI-BAPI_SALESORDER_CRETEFROMDAT1 by filling the parameters from VB and then invoke
So it will be triggered in SAP and will create one Sales Order in SAP with the parameters given by VB and will return the salesorder number to VB.
So these are the process followed for integrating VB with SAP.
Hope now u got.
Mark points if helpful.
Regs
Manas Ranjan Panda</b>

Advantage and disadvantages of SAP IDM & Microsoft Identity management Tool

Hi Folks,
I am looking some points on SAP IDM and Microsoft tool for Identity Management. I am looking below mention points.
1. Difference in the feature and prize.
2. Limitation
3. Solution architecture for both
Relevant answers will be rewarded.
Regards,
Akshay Shail

Hi,
I can add some points about SAP NW IdM. Regarding your question about the prize: If you only connect SAP systems (it can handle all types of SAP ABAP and SAP Java Systems) they don't charge you extra, because it's already in the NetWeaver license. Furthermore, if you use the SAP Central User Administration: It isn't further developed and will be replaced by SAP NW IdM.
The systems you mentioned can be connected, I think these are basics for everey IdM solution. HR interation is possible with SAP IdM, don't know about the other solution in this point.
There are some whitepapers and presentations about SAP NW IdM: https://www.sdn.sap.com/irj/sdn/nw-identitymanagement?rid=/webcontent/uuid/f0b68fb1-d8af-2a10-2a8e-cc431c15bb39&anchor=section2.
Nevertheless, your question about limitations and solution architecture probably needs a PoC if you want to answer them in deep.
Best regards,
Nils

Data Upload into SAP from Microsoft Excel

Hi Guys: I created a function module from a BDC program and made it RFC enabled. When I execute this in SAP, it works fine and creates a customer. But when I try to trigger it from Excel, it gives me the error Object Variable or With Block Variable not set. Please HELP!...
Here is my VB code
Option Explicit
' Declaration for the necessary objects
Dim objBAPICortrol, objConnection, objCreateCustomer, objAcctGr, objCoCode, objReturn As Object
Dim objSalesOrg, objDistCh, objDiv, objName, objStreet, objPostalCode, objCity, objRegion, objCountry As Object
Dim objCountycode, objCityCode, objReconAcnt, objPaymentHist, objCustPrPro, objCustStGrp, objIncoTerms, objSDPayTerms, objAcntAssGrp, objTaxClass As Object
Dim vLastRow, vRows As Integer
Private Sub CommandButton2_Click()
' Create an Email in Outlook
Application.Dialogs(xlDialogSendMail).Show
End Sub
Private Sub CommandButton3_Click()
' Getting the last filled Row in Column A
vLastRow = Cells(Rows.Count, "A").End(xlUp).Row
' Setting the necessary variables for R/3 connection
Set objBAPICortrol = CreateObject("SAP.Functions")
Set objConnection = objBAPICortrol.connection
' Establish a connection
If objConnection.Logon(0, False) Then
MsgBox "Connection Established"
End If
On Error Resume Next
' Assign the Parameters
Set objCreateCustomer = objBAPICortrol.Add("Z_RFC_CUSTOMER_CREATE_XLS")
Set objAcctGr = objCreateCustomer.Exports("KTOKD_005")
Set objCoCode = objCreateCustomer.Exports("BUKRS_001")
Set objSalesOrg = objCreateCustomer.Exports("VKORG_002")
Set objDistCh = objCreateCustomer.Exports("VTWEG_003")
Set objDiv = objCreateCustomer.Exports("SPART_004")
Set objName = objCreateCustomer.Exports("NAME1_006")
Set objStreet = objCreateCustomer.Exports("STRAS_007")
'Set objHouseNumber = objCreateCustomer.Exports("House Number")
Set objPostalCode = objCreateCustomer.Exports("PSTLZ_009")
Set objCity = objCreateCustomer.Exports("ORT01_008")
Set objRegion = objCreateCustomer.Exports("REGIO_011")
Set objCountry = objCreateCustomer.Exports("LAND1_010")
Set objCountycode = objCreateCustomer.Exports("COUNC_013")
'Set objPhone = objCreateCustomer.Exports("Phone")
'Set objContact = objCreateCustomer.Exports("Contact")
'Set objFax = objCreateCustomer.Exports("Fax")
'Set objEmail = objCreateCustomer.Exports("Email")
'Set objDirections = objCreateCustomer.Exports("Directions")
Set objCityCode = objCreateCustomer.Exports("CITYC_014")
Set objReconAcnt = objCreateCustomer.Exports("AKONT_015")
Set objPaymentHist = objCreateCustomer.Exports("XZVER_017")
Set objCustPrPro = objCreateCustomer.Exports("KALKS_019")
Set objCustStGrp = objCreateCustomer.Exports("VERSG_020")
Set objIncoTerms = objCreateCustomer.Exports("INCO1_021")
Set objSDPayTerms = objCreateCustomer.Exports("ZTERM_023")
Set objAcntAssGrp = objCreateCustomer.Exports("KTGRD_024")
Set objTaxClass = objCreateCustomer.Exports("TAXKD_01_025")
' Now looping through all values create customer
' The data begin row is set to 2
For vRows = 2 To vLastRow
' Set the Parameter Values
objAcctGr.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 1).Value
objCoCode.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 2).Value
objSalesOrg.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 3).Value
objDistCh.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 4).Value
objDiv.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 5).Value
objName.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 6).Value
objStreet.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 7).Value
'objHouseNumber.value = ThisWorkbook.ActiveSheet.Cells(vRows, 8).Value
objPostalCode.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 9).Value
objCity.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 10).Value
objRegion.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 11).Value
objCountry.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 12).Value
objCountycode.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 13).Value
'objPhone.value = ThisWorkbook.ActiveSheet.Cells(vRows, 14).Value
'objContact.value = ThisWorkbook.ActiveSheet.Cells(vRows, 15).Value
'objFax.value = ThisWorkbook.ActiveSheet.Cells(vRows, 16).Value
'objEmail.value = ThisWorkbook.ActiveSheet.Cells(vRows, 17).Value
'objDirections.value = ThisWorkbook.ActiveSheet.Cells(vRows, 18).Value
objCityCode.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 19).Value
objReconAcnt.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 20).Value
objPaymentHist.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 21).Value
objCustPrPro.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 22).Value
objCustStGrp.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 23).Value
objIncoTerms.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 24).Value
objSDPayTerms.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 25).Value
objAcntAssGrp.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 26).Value
objTaxClass.Value = ThisWorkbook.ActiveSheet.Cells(vRows, 27).Value
' Function call
objCreateCustomer.call
' Get return parameters & display in excel
Set objReturn = objCreateCustomer.Imports("RETURN")
ActiveSheet.Cells((vLastRow + vRows), 1) = objReturn.Value("MESSAGE")
' Error handling
If Err Then
MsgBox Err.Description
End If
Next vRows
End Sub

Hello,
Whatz impossible ??
Yes you can export the data from excel to SAP using VBA, but you need to create fome RFC in SAP as well that will handle the data you will send.
1. Create a RFC function in R/3 that will read a file from specific location and perform the respective transaction.
2. Create your excel file with respective file format and call the RFC function in SAP passing the parameters as file name and other required details.
3. SAP coding for RFC will be a single time activity and then onwads you can just create excel file for upload and use VBA code to initiate the RFC call.
Hope this make some sence. Tell me if you have more queries.
Regards,
Vishal
Reward points.. if helpful

BizTalk 2009 WCF-SAP Adapter Could not load file or assembly 'Microsoft.Adapters.SAP.SAPGInvoker...' one of its dependencies error

Hello,
I have a BizTalk Server 2009 running on Windows Server 2003 x64. I am installing WCF-SAP adapter and have done the following for the same. However, I am getting an error as mentioned below when I click on the Configure button of WCF-SAP adapter in send
port. I would appreciate if anyone could let me know how to fix this error and make the WCF-SAP adapter working.
TITLE: BizTalk Server 2009 Administration Console
Exception has been thrown by the target of an invocation. (mscorlib)
ADDITIONAL INFORMATION:
Exception has been thrown by the target of an invocation. (mscorlib)
Could not load file or assembly 'Microsoft.Adapters.SAP.SAPGInvoker, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' or one of its dependencies. This application has failed to start because the application configuration is incorrect. Reinstalling
the application may fix this problem. (Exception from HRESULT: 0x800736B1) (Microsoft.Adapters.SAP)
This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. (Exception from HRESULT: 0x800736B1)
I have copied the following 32 bit & 64 bit unicode DLLs in SysWOW64 and System32 folders respectively.
icudt30.dll
icuin30.dll
icuuc30.dll
librfc32u.dll
libsapu16vc71.dll
libsapucum.dll
Following r3dllinst DLLs are there in System32 folder.
mfc42.dll
mfc42u.dll
mfc71.dll
mfc71u.dll
msvcp60.dll
msvcp71.dll
msvcp80.dll
msvcr71.dll
msvcr80.dll
Following r3dllinst DLLs are there in SysWOW64 folder.
mfc40.dll
mfc40u.dll
mfc42.dll
mfc42u.dll
mfc71.dll
mfc71u.dll
mfc80.dll
mfc80u.dll
msvcp50.dll
msvcp60.dll
msvcp71.dll
msvcp80.dll
msvcr71.dll
msvcr80.dll
I have the following softwares installed on the server.
Microsoft Visual C++ 2008 Redistributable x64
Microsoft Visual C++ 2008 Redistributable x86
WCF LOB Adapter SDK (64-bit)
BizTalk Adapter Pack 2.0 (64-bit)
BizTalk Adapter Pack 2.0 (32-bit)
The following bindings are also present in the machine.config under Framework\v2.0.50727\CONFIG and Framework64\v2.0.50727\CONFIG
<system.serviceModel>
<extensions>
<bindingElementExtensions>
<add name="sapAdapter" type="Microsoft.Adapters.SAP.SAPAdapterExtensionElement, Microsoft.Adapters.SAP, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" />
</bindingElementExtensions>
</extensions>
<client>
<endpoint binding="sapBinding" contract="IMetadataExchange" name="sap" />
</client>
</system.serviceModel>
Thanks,
Tarun

Have you tried this?
http://geekswithblogs.net/MoonWalker/archive/2013/07/17/could-not-load-file-or-assembly-microsoft.adapters.sap.sapginvoker.dll.aspx
Morten la Cour

Difference between SAP NetWeaver Gateway 2.0 and SAP NetWeaver Gateway productivity accelerator for Microsoft

Hi Experts ,
Can anyone tell me the difference between SAP NetWeaver Gateway 2.0 and SAP NetWeaver Gateway productivity accelerator for Microsoft ?
Best Regards,
SK

SAP Netweaver Gateway 2.0 is a product for Exposing ERP data as OData for external consumption which is independent of any Microsoft product. Using this you can model OData services and Expose them for light weight consumption. You can use this in use cases where you just want to consume the OData in some client or so, and you do not want any kind of accelerators to help you in development or in your integration.
GWPAM is an interoperability framework from SAP that leverages SAP NetWeaver Gateway and Microsoft technologies enabling customers and partners to easily and quickly compose solutions that consume and extend SAP throughout Microsoft technologies for on premise and on demand deployment. With GWPAM you get components like
GWPAM Visual Studio Add-On,GWPAM Template,GWPAM Project,GWPAM Outlook Add-In which are very much Microsoft specific.

Microsoft Excel slowing down and other problems when SAP BPC EPM Add-in is installed

Hello,
Our client is having some problems with Microsoft Excel (MS Office 2013) since the SAP BPC EPM Add-in was installed in their computers.
They are suffering from Microsoft Excel slowing down, even when not connected to SAP BPC (10.0 NW version).
For example, when opening two or more excel archives, not connected to SAP BPC, Microsoft Excel crashes and is restarted with errors.
Have you experienced something similar in other installations?
Thank you very much, and kind regards,

In relation to the previous post , we have to emphasize that we have installed in ours PC's:
MS Office 2010 14.0.7116.5000 32 bit,
EPM add-on version 10.0 SP20 (10.0.0.8993).
and our customer have installed in theirs PC's:
MS Office 2013 15.0.4675.1001 32-bit.
EPM add-on version 10.0 SP19 patch 1 .NET 3.5 compilation 936.
Thank you very much

SAP GRC 5.2 Microsoft Project Plan

Ladies and Gentlemen:
In the past, somewhere I found the SAP GRC Microsoft Project Plan. Can someone please tell me where I can find this now or can someone send it to me?
Regards,
Greg

Hi guys,
please stop this.
The plan is available as part of the GRC Best Practice site:
http://help.sap.com/bp_grcv152/GRC_US/HTML/index.htm
Please get it from there.
Frank.

SAP SMTP Configuration for Microsoft Exchange Online (Microsoft Hosted Solution for Exchange - Office365)

Dear All,
We are using Microsoft Exchange Online (Microsoft Hosted Solution for Exchange – Office 365) for sending and receiving emails. Now we want to setup SAP SMTP so that emails / notifications can be sending through SAP via Microsoft Exchange Online. It is quite easy to configure for setting SMTP Services for locally hosted Exchange Server. But this is the first time I am trying to setup for Microsoft Exchange Online.
Current Instance Profile settings are as follows;
is/SMTP/virt_host_1                         *:25000
is/SMTP/virt_host_0                         *:*
icm/server_port_2 PROT=HTTPS,PORT=44300,PROCTIMEOUT=300,TIMEOUT=600
icm/server_port_1                           PROT=SMTP, PORT=1080, TIMEOUT=180
icm/server_port_0 PROT=HTTP,PORT=8000,PROCTIMEOUT=300,TIMEOUT=600
ms/server_port_0                            PROT=HTTP,PORT=81$$
SCOT Settings are
Mail Host             smtp.office365.com
Mail Port              587
Following are the settings for configuring Outlook for Exchange Online – Office 365;
Server name
Port
Encryption method
POP3
outlook.office365.com
995
SSL
IMAP4
outlook.office365.com
993
SSL
SMTP
smtp.office365.com
587
TLS
Please assist if any one configure office365 with SAP.

Hello Majid,
Were you able to setup SCOT for Office365 online, I have to setup same.
Can you help with some guidelines on how you setup.?
Regards,
Ashish

SAP Integration with Microsoft

Hi,
what are the different ways of integration from SAP to Microsoft and Reversal ?
For Example: SAP-> MS SharePoint , SAP -> MS ChangePoint (PSA Software)

Hi Nawaz,
Check these, about Sharepoint integration with SAP PI:
Sharepoint integration with SAP PI
Interoperability between Microsoft .Net 3.5 and EHP 1 for SAP NetWeaver PI 7.1 (Article)
I havent work with Changepoint, but if i was you i would read about the kind of interfaces that support to take the more appropriated in SAP PI.
Regards,

SAP SD Microsoft MPP

Similar Messages

Maybe you are looking for