Sap sd set profit center as mandatory field in va01

Hi guru's
here to set profit center field as mandatory in va01 i know the configuration in SD.
but this profit center field in va01 by default triggering one dummy profit center automatically.
i already set the configuration but not working bcoz of this dummy profit center.
provide the solution as soon as possible.
Best Regards
Prasad.

hi,
U can use Incompletion Log else transaction variant for the same.
Goto Tcode:SHDO -
> Transaction Code=VA01->Transaction Variant=bus2032>click with processing ikon on the top -> search for the field PRCTR (profit center)-> make it requred field
hope this helps u
regards,
Arun prasad C R

Similar Messages

Profit Center as mandatory field for Posting keys 01, 11, 31, etc.

Hello,
Currently I am in a project in which we have implemente New GL; my client is asking me to activate the Profit Center field for posting keys 01, 11, 21 and 31, so they can post in example documents with posting key 31 (vendor) vs posting key 01 (client). I modified the accounts field status in order for the Profit Center to be mandatory. I modified, as well, posting keys 01, 11, 21 and 31 field status' in orden for the profit center to be mandatory as well. Regardless of this, the profit center just doesn't appear when I post a document in example through tx F-02.
Does anyone knows how to make this field appear for the posting keay I mentioned? Is it possible? or is this a system limitation?
Thanks in advance for your help.
Regards,
HP

Hello,
I figured out how to make the Profit Center field modifiable on the Client and Vendor postitions.
Thanks to everyone for their replies.
Regards,
Paul

Maintain Profit Center as mandotary field in Material Master

Dear Experts,
We would like to make Profit Center under Sales: General/Plant view as mandotary field during Material Master creation. Kindly assist me the path that where we can maintain this. Thank you.
rgds,
nantha

Hi,
Go to OMS9, Under Field Selection (Field Selection Group 1) screen tab, double click the material type for which you want Profit center as mandatory field.
Scroll down to Selection Group "48", Select the radio button "Required Entry".
Go to MM01, check under Sales: General/Plant, you will be able to see Profit Center as Mandatory field.
Hope this will help you out.
Regards,
Vijay

ERP Sales Order with Profit Center value mandatory in ECC side!

Hi Experts,
I'm working with a scenario using SAP CRM 7.0 and ECC 6.0 EHP4, using ERP Sales Order and ERP Quotation.
The sales order transaction type in ECC side is set up to use profit center at item level as mandatory and I can't find this attribute at Item Details in CRM Webclient. I can't save my order, because this error and the AB Incompletion Log always shows this error.
Any ideas? Is it possible set profit center value in CRM?
Best Regards
Heber Olivar

Hi Heber!,
I hope you are doing well.
We have the same issue, please could you share us how did you resolve this issue?
We have SAP CRM 7.0 EHP2 and SAP ECC 6.0 and for the creation to ERP Orders correctly in SAP CRM is necessary the profit center value.
Thanks in advance.
Best Regards!

To make profit center as mandatory while creating cost center

Hi,
what is the procedure to make profit center as mandatory while creating cost center.
Thanks and Regards
Boppana

Hi Boppana,
There are two possibilities to have the profit center field as
mandatory in KS01 (cost center creation):
a) You can modify message number KS096 to "Error" via OBA5.
   Thus, the users would no be able to save a cost center without enteri
   a profit center.
   Depending on Your release you can make KS096 modifiable by
   implementing note 486781.
b) You can directly modify the field via SE51 (SE51 -> Element list ->
   Rider Special Attributes) to mandatory entry.
   But in order to do this, You will need an SAP developer and
   object key (available via OSS ).
I would strongly advise method a). It's simpler and you don't
have to modify a SAP object (it would be a modification of the standard)
br, Guido

How to mix default profit center and mandatory profit center ?

Dear all,
I have defined that the profit center is mandatory for all accounts (with the field status group).
For some accounts, I have defined a default profit center in spro.
When I do a posting for those accounts, and I don't key in a value for profit center, I receive the error message "An entry is required in Profit center field for account xxxx". But, the account has a default profit center defined in spro.
Why the default profit center is not taken in consideration before to display the error message ?
Is there any solution ?
Thanks for your help

When the field status group for an account mandates a field, it has to be filled in ENTRY view, i.e. when you are entering the document. System would not let you go further until the field is filled with a valid value. Default profit center configuration gets triggerred subsequently (just before the posting).
Solution: For account for which you have default profit center configuration, change the field status group so profit center is optional.

IW31 how to set functional area as mandatory field?

Hi,
Can anyone guide me, is any way to set "functional area" as mandatory field (t-code iw31 Additional Data -> Functional area)? Thanks in advance.

go to the config:
SPRO: PM & CS -> Maint. & Serv. Processing -> Maint. and Service Orders -> Define Field Selection for Order Header Data (PM)
...Choose "Field Selection for order header data"
...toggle to change mode (use menu "field selection at the top left". Then find your field (functional area CAUFVD-FUNC_AREA) and put the radio button to "required"
This will make it mandatory for all order types. If you want only specific order types, use the influencing fields to pick only certain order types.

MB11 552 Mvt Type Cost Center as Mandatory Field,Want to change to optional

Hi
In MB11 552 Mvt Type Cost Center as Mandatory Field, Requirement here is to change the filed to optional.
Whr are the settings?
Vijay

Hi,
Go to OMJJ...then enter MVT 552....Select line for MVT 552 then click on on left hand side you will see Field selection (from 201)/Batch search procedure...Double click on mvt 552...double clik on Additional account assignments---here make cost center as optional.
Cheers
Utsav

Re:Profit center as mandatory for VA01

Hi Experts,
Good Morning,
my issue is if i didnt give profit center in va01 the document should not be saved, so in OMS9 which field sel.group (eg:name-0001,0002.....) i need to go and maintain as "Reqd Entry"
Thanks in advance & points will be assign for useful answers,
SAP UK.

For information, Profit Center is flowing in sale order based on the value you maintain in material master. So the first option is make the material master field as mandatory.
Make the said field in material master as mandatory. To set this, go to OMS9, input 8 in "Field sel.group" and enter. Double click on Profit Center and choose the option "Reqd Entry" and save.
Now without maintaining Profit Center, you cannot save the material master.
So while creating sale order for that material, the profit center will flow automatically and no need to maintain the same.
Of course, for sale order, you can make this field as mandatory and it is blank, it cannot be said. To achieve this, Go to OVA2, block Sales - Item and double click on Procedures. There select Standard Item and click on Fields. There maintain the following:-
Table::::Fld name::::::Description::::::::Screen:::Status
VBAP::::::PRCTR::::::::Profit Center::::::::PKNT:::::00
Now without Profit Center, you cannot save the sale order.
thanks
G. Lakshmipathi

Profit Center (Dimension1) Mandatory- In JE

Dear All
Can i make Cost Center ( Dimension1 ) Mandatory in manual Journal Entry. If i make it mandatory by using stored procedure what would be the impact on the following scenarios where Automatic Journal entry is being created
1. A/P Invoice
2.A/R Invoice
3.Outgoing Payment
4.Incoming Payment
( Will it block me if i am not selecting any cost centers in the above scenarios)
Regards
Rashid

hi rashid,
Good Question
Apply "SP_Transaction Notification" to manual JE stored procedure
should be coded with TransType = 30 as a condition.
In automatic posting of JE profit centres will be assigned according to defintion of profit centres & distribution rules & U can update other profit centres using DTW JE based on below SQL Queries.
For AR Invoice
Select T0.TransId,T0.TransType,T0.RefDate,T0.Line_ID,T0.Account,T0.ProfitCode
From JDT1 T0 Where T0.TransType = 13 and T0.RefDate BETWEEN '[%0] AND '[%1]'
For AP Invoice
Select T0.TransId,T0.TransType,T0.RefDate,T0.Line_ID,T0.Account,T0.ProfitCode
From JDT1 T0 Where T0.TransType = 18 and T0.RefDate BETWEEN '[%0] AND '[%1]'
For incoming & outgoing payment refer to this link.
https://forums.sdn.sap.com/watches!add.jspa?forumID=264&threadID=1085085
Jeyakanthan

Profit center filed mandatory in T.code F-29 for dwon payment

Dear Gurus,
How to make a field profit center mandatory in T.code F-29 for dwon payment?
Thanks & Regrads,
Dharma raju.

Hi
In field status group OBC4 and in OB41 (posting key)you can make the profit centre field as mandatory field.
The priorities of SDRO would apply. so you need to give profit centre as mandatory in both ( OBC4 and OB41)

Re:Assign Profit center as mandatory in va01

Hi Gurus,
Good Afternoon to you,
I have a doubt in Order type for few order types i need to mention particular profit center(abc123) as mandatory so can anybody tell me where i need to assign the profit center in that particular order types.
The purpose of this is when i select the VA01 in the Ordering party screen when i select the material it automatically must come profit center(abc123) instead of giving manually profit center.
Awaiting for your golden replies& Points will be assign for the useful answers.
Thanks in advance,
KUMAR.B

Hi Guru,
As per your yesterday feedback i have assigned in Material Sales:General/Plant Data later when i go VA01 when i give the material i can see the profit center which i assigned in Material but my client is saying that i dont want in MM02 i want to assign the Profit center in Order type so can you explain me some more detaily above SHD0 and VOV8 where i can assign the profit center.
Because if i assign in Material also problem why because there are nearly 500 above materials i need to change. so if it is order type means i need to change very few only maximum 5.
Awaiting for your replies & points will be assign for useful answers.
Thanks in advance,
KUMAR.B

Map Profit Center as custom field to product

Hi,
We want to map Profit Center(35 characters) to a custom field in product for some analysis. We want to map it to Custom Attribute 2 (XARLPROA2) this is a 40 character long field.
We do not want to see this field in Reports in UI. Please let us know is this the right approach or would you suggest some other field to which wecan map Profit Center.
Regards
Neel

Hi Neel
I am assuming that you are referring to display attribute and not navigation attribute that needs to be added to product. Yes, thats the same as adding an attribute in standard BW way.
And then, in the SPM UI you can display attributes in the contextual menu of a particular product.
But if you do need to do analysis on it then on top of adding the attribute, you need to flag it as navigation and then bring it in the following:
The respective cube(s) 0ASA_C*
Add it into the multiprovider 0ASA_MP01
Add it to the Query
Log into SPM UI and refresh all data sources (make sure that no other users are logged in at that time), log out
Clear browser cache and log back in
Create report with that nav att
Hope that helps!
Regards
Rajesh

Set Shipping Point as mandatory field in STO

Dear Expert,
I am trying to set shipping tab -> shipping point as mandatory field in STO, I went to SPRO->MM->Purchasing ->PO->Define screen layout at Document Level but were unable to find the field selection group that has the field.
Does anyone knows whether the shipping point can be set as mandatory field?
Thank you in advance for any assistance.
Take care,
Andrea

and also
Spro>Logistics Execution>Shipping>Basic Shipping Functions>Shipping Point and Goods Receiving Point Determination>Set Up Storage-Location-Dependent Shipping Point Determination>Define Rule for Determination of Shipping Point
Spro>Logistics Execution>Shipping>Basic Shipping Functions>Shipping Point and Goods Receiving Point Determination>Set Up Storage-Location-Dependent Shipping Point Determination>Assign Shipping Points According to Storage Location
Spro>Logistics Execution>Shipping>Basic Shipping Functions>Shipping Point and Goods Receiving Point Determination>Set Up Storage-Location-Dependent Shipping Point Determination>Assign Shipping Points
So, that the Shipping point will determined Automatically..

WD_BADI_DOMODIFYVIEW - dynamically set screen element as mandatory field

Hi,
I would like to use WD_BADI_DOMODIFYVIEW to dynamically set a standard screen element on my Webdynpro as a mandatory field. Does anyone know which method in which class that I can use to set the status from 'Normal field' to 'required' ?
This is a for standard SRM webdynpro screen. Unfortunately I could not get the configuration to set the standard metadata field as a mandatory field.
Also this standard field does not have an existing binding to a context element to manipulate the status of the field. Hence I need to find a method that can directly change the attribute of this standard screen element to mandatory. I do not want to modify the webdynpro to change the status of the field to 'required'.
<promise removed by moderator>
Thanks
Liam
Edited by: c958209 on Apr 28, 2011 1:32 PM
Edited by: Thomas Zloch on Apr 28, 2011 4:58 PM

Hi Kiran,
I think I understand what you are suggesting now. The trouble is IF_V_SC_DOFC_I_LIMITEM (the view I'm trying to enhance) does not exist in the BAdI.
When I go to the attributes of the View of the Webdynpro component that I'm trying to enhance I do see WD_THIS refto IF_V_SC_DOFC_I_LIMITEM.
It's just that in the BAdI WD_BADI_DOMODIFYVIEW this WD_THIS is not available and trying to define it like below does not work.
    Make Product Category field mandatory
      lo_node = wd_context->get_child_node( co_item_data ).
      lo_value = lo_node->get_element( ).
    Get value of context element SH_CATEGORY_ID
      lo_value->get_attribute( EXPORTING name = co_sh_category_id
                               IMPORTING value = lv_sh_category_id ).
      IF lv_sh_category_id IS INITIAL.
        DATA: lo_message_manager TYPE REF TO if_wd_message_manager.
        DATA lo_api_controller     TYPE REF TO if_wd_controller.
        DATA wd_this TYPE REF TO if_v_sc_dofc_i_limitem.           <================ This gives a syntax error "The type          IF_V_SC_DOFC_I_LIMITEM is unknown
        lo_api_controller ?= wd_this->wd_get_api( ).
        CALL METHOD lo_api_controller->get_message_manager
          RECEIVING
            message_manager = lo_message_manager.
      Report message
        CALL METHOD lo_message_manager->report_attribute_error_message
          EXPORTING
            message_text   = 'Please fill the Document Date'
            element        = lo_value
            attribute_name = 'SH_CATEGORY_ID'.
      ENDIF.

Sap sd set profit center as mandatory field in va01

Similar Messages

Maybe you are looking for