SAP SEM and dialog instances
Hello Forum !
On our previous SAP BW3.5 and SEM installation we were told that due to the locking mechanisms within the SAP SEM modules the SAP system was unable to handle more than one instance (Central Instance), and that we would not be able to add any dialog instances to this configuration.
I have been unable to confirm this with any documentation, but several consultancy firms have claimed the same.
Can anyone on this forum confirm that this is the case, and if so. Does the same limitations apply to a SAP BI 7.0 with SEM installation.
Regards
Kjell Erik Furnes
SAP Basis
Hi,
For SEM it is better to have a FI knowledge because particularly when you deal with SEM-BCS you need to know FI very well.
If it is mere SEM-BPS then youe present knowledge will do.
Hope this helps.
Assign points if useful.
Regards,
Venkat
Similar Messages
-
CI (ABAP+Java) & DB in one AIX box and dialog Instance on a Linux box
We trying to install SAP, CI+DB in one AIX box and dialog Instance on a Linux box. We are facing problem when trying to install Java Dialog Instance. Is it possible and recomended to install in the above manner?
Has anyone done this? please share your exepeirience.
thanks & regards,
Harsha.
ps we have read the Note 1067221 - Central Note for Heterogeneous Installation, which indicates this is possible.If you would have stated, which kind of problem you are facing, we could have seen, if the problem is related to because of heterogeneity or because of something different.
It should be possible to do that - yes
Markus -
J2EE Engine cannot be started. SAP CRM EHP1 Dialog Instance Installation
Hi All,
During Installation of a DI on a Linux host, I encounterd a problem. An error occured during " start dialog instance". The ABAP enginee is started successfully where as the JAVA Enginee cant be started. During investigation I found from the log directory
..j2ee/cluster/server0/log as stated below ..
#1.#0050569F663E001E0000000C0000054F0004803004D18B3F#1266843634469#com.sap.engine.core.service630.container.ServiceRunner##com.sap.engine.core.service630.container.ServiceRunner#######SAPEngine_System_Thread[impl:5]_64##0#0#Error#1#/System/Server#Java###Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
[EXCEPTION]
#1#com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: null
ume.db.connection_pool_type=SAP/BC_UME
ume.db.connection_pool.j2ee.xatransactions_used=false
ume.db.connection_pool.j2ee.is_unicode=false
ume.db.connection_pool.j2ee.oracle_native_driver_used=false: (No text available)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:83)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:109)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: null
ume.db.connection_pool_type=SAP/BC_UME
ume.db.connection_pool.j2ee.xatransactions_used=false
ume.db.connection_pool.j2ee.is_unicode=false
ume.db.connection_pool.j2ee.oracle_native_driver_used=false: (No text available)
at com.sap.security.core.persistence.datasource.imp.DataBasePersistence.init(DataBasePersistence.java:887)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:440)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
... 6 more
#1.#0050569F663E001E0000000E0000054F0004803004D18C49#1266843634469#com.sap.engine.core.Framework##com.sap.engine.core.Framework#######SAPEngine_System_Thread[impl:5]_64##0#0#Fatal#1#/System/Server/Critical#Plain###Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.#
I checked with the env variable and parameter, it all looks good. If anybody finds the same issue please suggest ....
Thanks in Advance.
Regards,
ShashiThere is a troubleshooting topic for this on the Help Portal.
See http://help.sap.com/saphelp_nw70ehp1/helpdata/en/20/361941edd5ef23e10000000a155106/frameset.htm.
-Michael -
EHP4 backup and Dialog instances
Hello All,
We intend to kick off the EHP4 PRD Downtime phase by Friday 10 PM.
Can you please provide me expert thoughts on the following:
1) When should we backup the PRD Database? (a) Anytime After the end of pre-processing phase when production operations are going on (b) after stopping of Application Servers and immediately before commencing the Downtime Phase
2) Is the online database backup fine or do we need a cold backup?
3) What steps specific to Dialog Instances are necassary like any profile parameter changes, explicit kernel upgrade on Dialog Instances before and after the downtime phase?
Thanks,
AntarpreetHi,
> 1) When should we backup the PRD Database? (a) Anytime After the end of pre-processing phase when production >operations are going on (b) after stopping of Application Servers and immediately before commencing the Downtime Phase
>
Once you will finish Pre-processing phase then it will ask you take backup of database, backup of upgrade directory and stop all productive operation. And then start downtime phase. At that phase you should take the backup. And this backup should be taken after stopping of application servers.
> 2) Is the online database backup fine or do we need a cold backup?
>
>
I would suggest you to take offline backup only because if you will take online backup then users will be there in the system which makes the backup inconsistent since productive operations will be on that time. Main idea to take backup is because if something goes wrong in downtime phase then you can restore the system at same stage before starting downtime. And if you will take online backup then users will be working that time so I think it defeats the purpose itself.
> 3) What steps specific to Dialog Instances are necassary like any profile parameter changes, explicit kernel upgrade on >Dialog Instances before and after the downtime phase?
>
For dialog instance, you can check SAP note 1245473 Add. Info. - SAP Enhancement Package Installer 7.00. Extract below from this note:
Updating Dialog Instances
After the enhancement package installation on the central instance, you
need to update the dialog instances accordingly. To do this, you install
the new dialog instances on top of the old dialog instances using the
tool SAPinst.
You can now also install more dialog instances, if necessary.
3. Save your dialog instance profiles, if you want to reuse them.
4. In case of a dual-stack system or a Java system, uninstall the old
dialog instances as described in the installation guide for your
source release.
5. To install a new dialog instance, proceed as described in the
document Installation Guide - <SAP NetWeaver / SAP application>
(<Technology>) on <Operating System>: <Database>.
6. If you use other instance numbers than on the source release and
reuse the old dialog instance profiles, adapt the instance numbers
in the profiles.
Thanks
Sunny -
Can you provide good books for SAP Scripts and Dialog programming?
Names of the books for Scripts and dilaog programming.
Hi,
pls chk this.
http://www.sap-press.de/katalog/buecher/titel/gp/titelID-667?GalileoSession=74564414A2Qf67.aL0Q
Have also a look at
http://www.amazon.com/gp/product/1893570142/102-2992344-7930525?v=glance&n=283155&n=507846&s=books&v=glance
for dialog prgrming.
pls chk these links.
Refer to the documentation @
http://help.sap.com/saphelp_47x200/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
Can also have a look at this link
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
Check this link for sample code.
http://www.sapgenie.com/abap/example_code.htm
http://www.sap-img.com/abap.htm
also,
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
rgds
anver
if hlped pls mark points
Message was edited by: Anversha s -
SMD Agents for Dialog Instances and Distributed Systems
Hi,
We are planning to install SMD agents in our landscape.
Is it sufficient if we install SMD agent on the central instance Host to monitor all the instances ( CI + Dialog Instances)
or
Do we need to install SMD agents individually for all the Instances each for CI and Dialog Instances.
Also , If we have CI and DB on a separate host (Distributed Environment), Do we need to install SMD Agent on DB host also.
Thanks,
TanujHello Tanuj,
Please refer to note 1365123 - Installation of Diagnostics Agents and check the attachments (AgentInstallationStrategy.zip) for this note.
BR,
SAPFan -
Hi,
At the time of SAP installation of Dialog instance at 1st step choose
service
after selecting option second, when we continue with it we are getting
following error.
"An error occurred while processing service
SAP NetWeaver 7.0 Support Release 3 > Software Life-Cycle Options >
Application Server > Oracle > Dialog Instance( Last error reported by
the step :The
subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kzwzinn'
does not exist on the 'localhost' host.)."
error log file has been attached with call for your refernce.
we are installing SAP Netweaver 7.0 support relase 3.
The sapinst log is as below :
INFO 2009-05-07 00:32:00.933
Execute step collect of component |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind|ind|ind|0|0
WARNING 2009-05-07 00:32:01.277
Error 5 (Access is denied.)
) in execution of a 'RegOpenKeyEx' function, line (81), with parameter (SYSTEM\CurrentControlSet\Services\kzwzinn).
WARNING 2009-05-07 00:32:01.277
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kzwzinn' does not exist on the 'localhost' host.
ERROR 2009-05-07 00:32:01.324
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kzwzinn' does not exist on the 'localhost' host.
ERROR 2009-05-07 00:32:01.339
FCO-00011 The step collect with step key |NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind|ind|ind|0|0|collect was executed with status ERROR ( Last error reported by the step :The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kzwzinn' does not exist on the 'localhost' host.).
INFO 2009-05-07 00:35:29.628
An error occured and the user decide to stop.\n Current step "|NW_DI|ind|ind|ind|ind|0|0|NW_GetSidFromProfiles|ind|ind|ind|ind|1|0|NW_readProfileDir|ind|ind|ind|ind|0|0|collect"..
The permissions are properly set for the registery.
Kindly suggest.
Thanks in advance.
Regards,
Rahul.Then you use the Local or Domain installation ? I'm think second ...
First of all do not use <sapsid>adm for the installation,
second, if you use domain installation :
you need read the instguide more clearly :
Required User Authorization for the Installation
Domain Installation
and the
Performing a Domain Installation without being a Domain Administrator
try to read in installation guide.
Regards. -
Java Server Nodes / Dialog Instance
Hi All,
When do we go for increase of Java Server nodes and Dialog instance?
Can i know the pros and cons of the same
my server is very slow in responding. I have tried the option of increasing the heap size but then i have little sucess
Rgds
adityaInstall a server process when the incoming request are many and the you can utilize more RAM memory
for eg if there are 8GB RAM and you have 1 server process the maximum u can give it is 2GB while the max 4GB can be utilized by any of the server processes in all in this system
Do not increase this heap size on the same server process (in windows u cant do it also max is 2GB) since then the garbage collection would take longer and also would run in few intervals
A Dialog instance is used when the system resources is completely exhausted and then we go for another hardware and install a fresh dailog instance there.. Its always recommended to use a Web Dispatcher in between the outside world and the SAP server in cluster mode
Hope i am right since i didnt find this information anywhere its based on my understanding and brainstorming sessions with other admins
RGds
Aditya -
Hi Friends
If more than one dialog instance can be installed in a computer?
I have installed a sap system(abap stack), central instance and dialog instance are in the same server. the dialog instance has started up, but I can't see the dialog instance through SM51. If some configuration is missing?
tons of thanks.
smhtrc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
M sysno 00
M sid S01
M systemid 399 (New architecture with Linux)
M relno 6400
M patchlevel 0
M patchno 56
M intno 20020600
M make: single threaded, Unicode, 64 bit
M pid 13770
M
M
M Sat May 9 00:32:26 2009
M ***LOG Q01=> tskh_init, WPStart (Workproc 0 1 13770) [thxxhead.c 1131]
M calling db_connect ...
C
C DBADASLIB : version 640.00, patch 0.055 (Make PL 0.56)
C SAPDB shared library (dbadaslib) patchlevels (last 10)
C (0.055) Min. release check of non default connection removed (note 807218)
C (0.055) Statistic data in ST05 corrected (note 807216)
C (0.039) Invalid data of STAD corrected (note 779116)
C (0.039) Do not abort session after -810 (note 780238)
C (0.035) Sapdb_free invalid address (note 766340)
C (0.035) EXPLAIN with non character inputvariables (note 770755)
C (0.032) Sapdb_free invalid address (note 766340)
C (0.032) Abap info for performance montior (note 216208)
C (0.032) SAPDB min. release is 7.4.3 (note 326487)
C (0.031) Set isolation level calls optimized (note 762712)
C
C
C INFO : SQLOPT= -I 0 -t 0 -F SAPDB.13770.pct
C Precompiler Runtime : C-PreComp 7.5.0 Build 026-123-094-430
C Precompiler runtime is SAP DB 7.5.0.026
C Try to connect (DEFAULT) on connection 0 ...
C
C Sat May 9 00:32:27 2009
C Attach to SAP DB : Kernel 7.5.0 Build 026-123-094-430
C Database release is SAP DB 7.5.0.026
C INFO : Database 'S01' instance is running on 'saps01'
C INFO : SAP DB Packet_Size = 131072
C INFO : SAP DB Min_Reply_Size = 4096
C INFO : SAP DB Comm_Size = 126976
C INFO : DBSL buffer size = 126976
C INFO : SAP DB MaxLocks = 300000
C INFO : Connect to DB as 'SAPS01'
C 00: DB_000 saps01-S01, conn=1, since=20090509003227
C ABAP= <unknown> (0)
C Now I'm connected to SAP DB
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20090509 003226 saps01
C INFO : SAP RELEASE (DB) = 640
M db_connect o.k.
I
I Sat May 9 00:32:31 2009
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0x2ba866adb000, size: 4400000)
M SHM_ROLL_AREA (addr: 0x2ba9763af000, size: 134217728)
M SHM_PAGING_AREA (addr: 0x2ba97e3af000, size: 67108864)
M SHM_ROLL_ADM (addr: 0x2ba866f0f000, size: 2672386)
M SHM_PAGING_ADM (addr: 0x2ba9823af000, size: 656416)
M ThCreateNoBuffer allocated 556152 bytes for 1000 entries at 0x2ba982452000
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12176 bytes (50 server) at 0x2ba988f20000
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation map
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 8
B dbtbxbuf: Buffer TABL (addr: 0x2ba9896b9100, size: 30000000, end: 0x2ba98b355480)
B dbtbxbuf: Buffer TABLP (addr: 0x2ba98b356100, size: 10240000, end: 0x2ba98bd1a100)
B dbexpbuf: Buffer EIBUF (addr: 0x2ba98bd1a108, size: 4194304, end: 0x2ba98c11a108)
B dbexpbuf: Buffer ESM (addr: 0x2ba98c11b108, size: 4194304, end: 0x2ba98c51b108)
B dbexpbuf: Buffer CUA (addr: 0x2ba98545e108, size: 3072000, end: 0x2ba98574c108)
B dbexpbuf: Buffer OTR (addr: 0x2ba98c51c108, size: 4194304, end: 0x2ba98c91c108)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
S
S Sat May 9 00:32:33 2009
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 0x14dbd1f0
S
S Sat May 9 00:32:34 2009
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S intervals: query=50, rescan=1800, global=300 info=120
S processing queue enabled
S creating spool memory service RSPO-RCLOCKS at 0x2ba98574e070
S doing lock recovery
S setting server cache root
S using server cache size 100 (prof=100)
S creating spool memory service RSPO-SERVERCACHE at 0x2ba98574e388
S using messages for server info
B dbtran INFO (init_connection '<DEFAULT>' [ADABAS D:640.00]):
B max_blocking_factor = 10, max_in_blocking_factor = 127,
B min_blocking_factor = 10, min_in_blocking_factor = 127,
B prefer_union_all = 1, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 0, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->0, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
S size of spec char cache entry: 297032 bytes (timeout 100 sec)
S size of open spool request entry: 2168 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Sat May 9 00:32:35 2009
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 36 MB, reducing # of fragments
A System page size: 4kb, admin_size: 5540kb.
A Attached to PXA (address 0x2ba98cb1e000, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Sat May 9 00:32:36 2009
A ABAP ShmAdm attached (addr=0x2ba9695b7000 leng=20955136 end=0x2ba96a9b3000)
A >> Shm MMADM area (addr=0x2ba969aaed80 leng=242176 end=0x2ba969ae9f80)
A >> Shm MMDAT area (addr=0x2ba969aeb000 leng=15499264 end=0x2ba96a9b3000)
A RFC Destination> destination saps01_S01_00 host saps01 system S01 systnr 0 (saps01_S01_00)
A RFC Options> H=saps01,S=00
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC abap/SIGCHILD_default not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 9
M ThrCreateShObjects allocated 8460 bytes at 0x2ba995de8000
N SsfSapSecin: putenv(SECUDIR=/usr/sap/S01/DVEBMGS00/sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is /usr/sap/S01/SYS/exe/run/libsapsecu.so .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 640, [6400.0.56.20020600]
W ITS Plugin: Int.version, [31]
W ITS Plugin: Feature set: [4]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by server list
M ThISetEnqname: enq name = >saps01_S01_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E Enqueue Info: enque/disable_replication = 2
E Enqueue Info: replication disabled
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 09.05.2009 00:32:36 1241800356 / 13770
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 09.05.2009 00:32:36 1241800356 / 2
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 09.05.2009 00:32:36 1241800356 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L Begin of BtcSysStartRaise
L Raise event SAP_SYSTEM_START with parameter <saps01_S01_00 >
L End of BtcSysStartRaise
M MBUF info for hooks: MS component UP
M ThActivateServer: state = STARTING
S
S Sat May 9 00:32:38 2009
S server @>SSRV:saps01_S01_00@< appears or changes (state 1)
S
S Sat May 9 00:32:39 2009
S server @>SSRV:saps01_S01_00@< appears or changes (state 1)
I MPI<6>3#17 Peak buffer usage: 5 (@ 64 KB)
S
S Sat May 9 00:32:58 2009
S server @>SSRV:saps01_S01_10@< appears or changes (state 5)
S server @>SSRV:saps01_S01_10@< appears or changes (state 5)
S
S Sat May 9 00:33:18 2009
S server @>SSRV:saps01_S01_10@< appears or changes (state 3)
S server @>SSRV:saps01_S01_10@< vanished
N
N Sat May 9 00:34:29 2009
N login/password_change_for_SSO : 1 -> 1
B
B Sat May 9 00:34:35 2009
B dbmyclu : info : my major identification is 171442396, minor one 0.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my uuid is D65E044AA45ECA35E10000000A3800DC.
B dbmyclu : info : current optimistic cluster level: 2
B dbmyclu : info : pessimistic reads set to 2.
S
S Sat May 9 00:40:53 2009
S found spool memory service RSPO-ACTIONS at 0x2ba9857567d0
B
B Sat May 9 12:02:53 2009
B table logging switched off for all clients
M
M Sat May 9 12:02:55 2009
M ***LOG R49=> ThCPICSyncWait, CPIC-Error (026665) [thxxcpic.c 3544]
M ***LOG R64=> ThCPICSyncWait, CPIC-Error ( CMINIT(SAP)) [thxxcpic.c 3557]
M
M *****************************************************************************
M *
M * LOCATION SAP-Gateway on host saps01 / sapgw00
M * ERROR service 'sapgw30' unknown
M *
M * TIME Sat May 9 12:02:55 2009
M * RELEASE 640
M * COMPONENT NI (network interface)
M * VERSION 37
M * RC -3
M * MODULE niuxi.c
M * LINE 521
M * DETAIL NiPGetServByName: service 'sapgw30' not found
M * SYSTEM CALL getservbyname
M * COUNTER 1357
M *
M *****************************************************************************
M
A RFC 1446 CONVID
A * CMRC=26 DATA=0 STATUS=0 SAPRC=665 ThSAPECMINIT
A RFC> ABAP Programm: RSLDAGDS (Transaction: RZ70)
A RFC> User: JXIONG (Client: 000)
A RFC> Destination: SLD_UC (handle: 1, , )
A *** ERROR => RFC ======> CPIC-CALL: 'ThSAPECMINIT'
Service name is not known
[abrfcio.c 7594]
A *** ERROR => RFC Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1462
CPIC-CALL: 'ThSAPECMINIT'
Service name is not known
DEST =SLD_UC
HOST =%%RFCSERVER%%
PROG =SLD_UC
GWHOST =10.56.0.169
GWSERV =sapgw30
[abrfcio.c 7594]
A TH VERBOSE LEVEL FULL
M
M Sat May 9 14:07:53 2009
M WARNING ==> PfFileIndUpd: new starttime < starttime -
Difference between SAP SLD and SAP Management console
Hello,
It seems that both System landscape directory and SAP management console have some overlapping features. The services can be started or stopped in both. Is it true? Does anyone know the difference between these 2 and where does Solution manager fit in?
Thanks
ShailikHi,
SAP SLD is the central information provider in a system landscape.this contains both Component information and Landscape description.COMPONENT Info in sense all the sap products and components along with their versions, And also third party products also.LANDSCAPE desc in sense the description of all the systems in particular landscape.
Example:This can shows exact idea for you.Components like CAF,Webdynpo(WD-java),BPM etc info.And the host names,Message server ports etc.Here we dont have start/stop functionality.
SAP MC provides a common framework for centralized system management. It allows you to monitor and perform basic administration tasks on the SAP system centrally, thus simplifying system administration. Using the SAP MC you can
1.Monitor and control (start, stop, or restart) the SAP system and its instances with a single tool
2.Monitor system alerts
3.Display the list of all access points to an SAP system etc.
We can see difference by looking into http://<host name>:<port>/index.html
Look and feel are also differ.
For more info you can go through these links of sap help.
For SAP SLD:http://help.sap.com/saphelp_nw04/helpdata/en/fe/39ae3d47afd652e10000000a114084/frameset.htm
For SAP MC:http://help.sap.com/saphelp_nwce10/helpdata/en/44/c707c053550f2ce10000000a1553f7/frameset.htm
Thanks,
Murthy. -
Central Instance on Windows, Dialog Instance on HP-UX
Hi,
Is it possible to have Central Instance installed on Windows 2003 and Dialog Instance on HP-UX 11.23?
Thanks
MahendraHi Mahendra,
I guess it depends wether you want to have ABAP only, or j2ee stack as well.
The J2ee stack over multiple OS (read J2EE SDK's) for CI and Dialog instances is not supported.
There is a note about it, but i do not have the number right now.
Björn -
Automatic shutdown of SAP Instance after installation of Dialog Instance
Hi all,
We've upgraded our system from SAP4.6C to ECC6.0 running on Win2003 64 bits Oracle 10g.
After upgrade, we installed Dialog instance (this dialog instance is running outside MS cluster) and it is running on Microsoft cluster. When we try to start up SAP dialog instance, the system is started but it automatically shuts down again.
Below are the trace for DEV_DISP
=============================
trc file: "dev_disp", trc level: 1, release: "700"
sysno 03
sid P02
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, ASCII, 64 bit, optimized
pid 3216
Wed Nov 22 12:32:40 2006
kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (03 3216) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Nov 22 12:32:51 2006
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0091.qqq.nxst) took 11 seconds
Wed Nov 22 12:33:08 2006
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >AP2_P02_03 <
DpShMCreate: sizeof(wp_adm) 5376 (896)
DpShMCreate: sizeof(tm_adm) 4663200 (23200)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
DpShMCreate: sizeof(comm_adm) 552064 (1088)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1496)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 0000000007DA0050, size: 5314128)
DpShMCreate: allocated sys_adm at 0000000007DA0050
DpShMCreate: allocated wp_adm at 0000000007DA1AB0
DpShMCreate: allocated tm_adm_list at 0000000007DA2FB0
DpShMCreate: allocated tm_adm at 0000000007DA3010
DpShMCreate: allocated wp_ca_adm at 00000000082157B0
DpShMCreate: allocated appc_ca_adm at 0000000008219E00
DpShMCreate: allocated comm_adm at 000000000821B570
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 00000000082A21F0
DpShMCreate: allocated gw_adm at 00000000082A2270
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 00000000082A22A0
DpShMCreate: allocated wall_adm at 00000000082A22B0
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Wed Nov 22 12:33:09 2006
***LOG Q0K=> DpMsAttach, mscon ( SAPGRPP02) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >AP2_P02_03 <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
Wed Nov 22 12:33:49 2006
ERROR => W0 (pid 1100) died [dpxxdisp.c 14241]
ERROR => W1 (pid 1112) died [dpxxdisp.c 14241]
ERROR => W2 (pid 1856) died [dpxxdisp.c 14241]
ERROR => W3 (pid 576) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x99 --> 0x98
ERROR => W4 (pid 1368) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => W5 (pid 1108) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0x90 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:33:59 2006
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Wed Nov 22 04:33:59 2006
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1100 Ended no 1 0 0
1 DIA 1112 Ended no 1 0 0
2 DIA 1856 Ended no 1 0 0
3 DIA 576 Ended no 1 0 0
4 BTC 1368 Ended no 1 0 0
5 SPO 1108 Ended no 1 0 0
Dispatcher Queue Statistics Wed Nov 22 04:33:59 2006
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 11
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Wed Nov 22 04:33:59 2006
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Wed Nov 22 04:33:59 2006
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:04 2006
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >AP2_P02_03 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1096) (SOFT_KILL)
Stop icman
killing process (748) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1096 HANDLE:536)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:05 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1096 HANDLE:536)
wait for end of icman
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:06 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:07 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:08 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:09 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:10 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:11 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:12 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:13 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:14 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:15 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:748 HANDLE:544)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=569
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Nov 22 12:34:16 2006
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:748 HANDLE:544)
DpStartStopMsg: send stop message (myname is >AP2_P02_03 <)
NiIMyHostName: hostname = 'AP2'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to MSG_SERVER, type 1
DpStartStopMsg: stop msg sent to message server o.k.
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIRead: read for hdl 2 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 2 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 2 (r)
NiIRead: hdl 2 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 2
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 2 recv would block (errno=EAGAIN)
Wed Nov 22 12:34:17 2006
NiIPeek: peek for hdl 2 timed out (r; 1000ms)
NiIRead: read for hdl 2 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 2 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 2 in set0
SiSelNSet: set events of sock 548 to: ---
NiBufISelRemove: remove hdl 2 from set0
SiSelNRemove: removed sock 548 (pos=2)
SiSelNRemove: removed sock 548
NiSelIRemove: removed hdl 2
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/6
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 14)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 2 / sock 548
NiBufIClose: clear extension for hdl 2
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3216) [dpxxdisp.c 10259]
Good Bye .....
Below is the trace for DEV_W0
==========================
M patchno 75
M intno 20050900
M make: multithreaded, ASCII, 64 bit, optimized
M pid 1100
M
M kernel runs with dp version 217(ext=109) (@(#) DPLIB-INT-VERSION-217)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1100) [dpxxdisp.c 1299]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 5376 (896)
M DpShMCreate: sizeof(tm_adm) 4663200 (23200)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552048/552064
M DpShMCreate: sizeof(comm_adm) 552064 (1088)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1496)
M DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000DDA0050, size: 5314128)
M DpShMCreate: allocated sys_adm at 000000000DDA0050
M DpShMCreate: allocated wp_adm at 000000000DDA1AB0
M DpShMCreate: allocated tm_adm_list at 000000000DDA2FB0
M DpShMCreate: allocated tm_adm at 000000000DDA3010
M DpShMCreate: allocated wp_ca_adm at 000000000E2157B0
M DpShMCreate: allocated appc_ca_adm at 000000000E219E00
M DpShMCreate: allocated comm_adm at 000000000E21B570
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000E2A21F0
M DpShMCreate: allocated gw_adm at 000000000E2A2270
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000E2A22A0
M DpShMCreate: allocated wall_adm at 000000000E2A22B0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host AP2
M
M Wed Nov 22 12:33:10 2006
M calling db_connect ...
C Prepending E:\usr\sap\P02\D03\exe to Path.
M call semaphore clean-up function ...
M ***LOG Q0E=> DpSigGenHandler, Exception (c06d007e) [dpnttool.c 432]
M -
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c06d007e (Unknown exception)
App : disp+work.EXE (pid=1100)
When : 11/22/2006 12:33:14.515
Threads : 2
Computer Name : AP2
User Name : SAPServiceP02
Number of Processors: 4
Processor Type: EM64T Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 440
--> (FAULT) Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000678f720 00000000078488ca 0000000000000003 kernel32!PulseEvent
000000000678f7f0 0000000007847fe6 0000000007926000 dboraslib!__delayLoadHelper2 [delayhlp.cpp (271)]
000000000678f860 00000000078136cd 000000000678f8b0 dboraslib!_tailMerge_OCI_dll
000000000678f8c0 000000000782f3d8 0000003d00000000 dboraslib!get_oci_client_version [dboci.c (2766)]
000000000678fa90 0000000001182107 000000000678fd80 dboraslib!DbSlConnect [dbsloci.c (1835)]
000000000678fce0 000000000118251e 0000000000000000 disp+work!open_con [dbcon.c (3582)]
000000000678fd50 00000000011856de 00000000ffffffff disp+work!supply_con [dbcon.c (3830)]
000000000678fd90 000000000117826c 0000000000000001 disp+work!dbsl_connect [dbslxxx.c (232)]
000000000678fdf0 00000000004ca16a 000000000755476c disp+work!db_connect [dblink.c (422)]
000000000678fe80 00000000004cf609 0000000006d6bdfd disp+work!ThInit [thxxhead.c (1404)]
000000000678feb0 000000000042c9e6 ffffffff00000002 disp+work!ThStart [thxxhead.c (1114)]
000000000678fee0 0000000000401097 ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1119)]
000000000678ff10 00000000018919c1 0000000000000000 disp+work!nlsui_main [thxxanf.c (82)]
000000000678ff70 0000000078d5965c 0000000000000000 disp+work!mainCRTStartup [crtexe.c (501)]
000000000678ffa0 0000000000000000 0000000001891850 kernel32!BaseProcessStart
State Dump for Thread Id c70
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000bd9fe40 0000000078d5f611 0000000006d31460 ntdll!NtFsControlFile
000000000bd9feb0 000000000178a99f 0000000000000000 kernel32!ConnectNamedPipe
000000000bd9ff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (595)]
000000000bd9ff70 0000000078d6b66a 0000000078d6b630 msvcrt!endthreadex
000000000bd9ffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
M -
M
M Wed Nov 22 12:33:15 2006
M call clean-up function ...
M in_ThErrHandle: 1
M ThSigHandler: signal (step 1, th_errno 11, action 4)
M
M Info for wp 0
M
M stat = 4
M reqtype = 1
M act_reqtype = -1
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source = 255
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = V-1
M
M *****************************************************************************
M *
M * LOCATION SAP-Server AP2_P02_03 on host AP2 (wp 0)
M * ERROR ThSigHandler: signal
M *
M * TIME Wed Nov 22 12:33:15 2006
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 11
M * MODULE thxxhead.c
M * LINE 10354
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 720]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 260]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1100) [dpnttool.c 327]
M return from clean-up function ...
Does anybody has a solution for this problem?
Thank you.Hi all again,
I had the same problem and found a solution for it.
I made two steps to start the dialog instance successful. First I modified the NLS_LANG setting in the registry and enviroment (only if necessary). Second, I fetched the last Oracle Instant Client <b>OCL10264.sar</b> from SAP Net and extract the file to <b>E:\usr\sap\PDV\SYS\exe\nuc\NTAMD64</b> (This directory was created through the Installer. The Kernel lies under <b>E:\usr\sap\PDV\D20\exe</b>)
Now I changed the variable <b>DIR_CLIENT_ORAHOME = $(DIR_EXECUTABLE)</b> to
<b>DIR_CLIENT_ORAHOME = E:\usr\sap\PDV\SYS\exe\nuc\NTAMD64</b> in the Instance Profile of the new Dialog Instance. So the Kernel knows that he has to use the Oracle Instance Client and the profilevariable says where he found it.
After these modifications the Dialog Instance starts with success.
With kind regards
Thomas Espenhain -
SAP Dialog Instance Installation.
Hi
Installation of ABAP System ECC6.0
I am trying to install another application server(Dialog Instance) on
different host. My both System Central(main server) and Dialog system in
same domain. I am installing SAP Server as a Local Installation.
I am able to installed Dialog Instance on same Host of Central System. But
when I was trying to installation it on different Host, I got error on
u201CStart Dialog Instanceu201D step that is last step it cant able to start Dialog
Instance.
Can you please tell me the Prerequisite for this type of setup as well as
any other Setting related to u201Chostsu201D and u201Cservicesu201Dfile ? and also central system
side settings.
Following Error is occurred :
u201CCopy Errors detected.................: 0
Sync Errors detected.................: 0
Warnings detected....................: 0
INFO 2008-11-21 13:14:39
Execute step createOsCol of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
WARNING[E] 2008-11-21 13:14:40
FSL-06002 Error 1060 (The specified service does not exist as an installed
service.
) in execution of a 'OpenService' function, line (266), with parameter
(SAPOsCol).
INFO 2008-11-21 13:14:41
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
INFO 2008-11-21 13:14:41
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove SAPOsCol
is written to the logfile ntscmgr.exe.log.
INFO 2008-11-21 13:14:41
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
remove SAPOsCol" finished with return code 0. Output:
failure: OpenService (0x424)
INFO 2008-11-21 13:14:41
The 'SAPOsCol' service on the 'Local' machine was created successfully.
INFO 2008-11-21 13:14:45
The service 'SAPOsCol' started successfully on host 'Local'.
INFO 2008-11-21 13:14:46
Execute step createService of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:14:46
Creating SAP start service of instance PT6/D02...
INFO 2008-11-21 13:14:47
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\sapstartsrv.exe.log.
INFO 2008-11-21 13:14:47
Output of D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm is written to the
logfile sapstartsrv.exe.log.
INFO 2008-11-21 13:14:53
Execution of the command "D:\usr\sap\PT6\D02\exe\sapstartsrv.exe -r -q -p
i3643vm\sapmnt\PT6\SYS\profile\START_D02_I3976vm2 -s PT6 -n 02 -U
I3976vm2\SAPServicePT6 -P XXXXXX -e I3976vm2\pt6adm" finished with return
code 0. Output:
Service succesfully installed.
INFO 2008-11-21 13:14:53
Execute step setServiceSecurity of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO[E] 2008-11-21 13:14:58
FSL-01027 Account user="I3976vm2\SAP_PT6_LocalAdmin" does not exist.
INFO 2008-11-21 13:14:58
Successfully set '(S-1-5-21-134454618-3270849815-193169279-1011, NONE, + |
SERVICE_START | SERVICE_STOP)(S-1-5-18, NONE, +o | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
| SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
| SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-32-544, NONE, + | DELETE | READ_CONTROL |
SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG | SERVICE_ENUMERATE_DEPENDENTS |
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ | STANDARD_RIGHTS_WRITE
| WRITE_DAC | WRITE_OWNER)(S-1-5-4, NONE, + | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-6, NONE, + | READ_CONTROL |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-11, NONE, + | SERVICE_USER_DEFINED_CONTROL)(S-
1-5-32-547, NONE, + | READ_CONTROL | SERVICE_ENUMERATE_DEPENDENTS |
SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE | SERVICE_QUERY_CONFIG |
SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP |
SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE)(S-1-5-21-134454618-3270849815-193169279-1009, NONE, +
| DELETE | READ_CONTROL | SERVICE_ALL_ACCESS | SERVICE_CHANGE_CONFIG |
SERVICE_ENUMERATE_DEPENDENTS | SERVICE_INTERROGATE | SERVICE_PAUSE_CONTINUE
| SERVICE_QUERY_CONFIG | SERVICE_QUERY_STATUS | SERVICE_START | SERVICE_STOP
| SERVICE_USER_DEFINED_CONTROL | STANDARD_RIGHTS_READ |
STANDARD_RIGHTS_WRITE | WRITE_DAC | WRITE_OWNER)' security to service
I3976vm2\SAPPT6_02' on computer 'I3976vm2'.
INFO 2008-11-21 13:14:58
Execute step createCCMSService of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
WARNING[E] 2008-11-21 13:14:58
FSL-06002 Error 1060 (The specified service does not exist as an installed
service.
) in execution of a 'OpenService' function, line (266), with parameter
(sapccmsr.02).
INFO 2008-11-21 13:14:59
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\ntscmgr.exe.log.
INFO 2008-11-21 13:14:59
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe remove
sapccmsr.02 is written to the logfile ntscmgr.exe.log.
INFO 2008-11-21 13:14:59
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\ntscmgr.exe
remove sapccmsr.02" finished with return code 0. Output:
failure: OpenService (0x424)
INFO 2008-11-21 13:14:59
Execute step setCCMSServiceSecurity of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:00
Execute step registerEventsDLL of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:09
Execute step setICMBndPermissions of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|NW_Instance|i
nd|ind|ind|ind|1|0.
INFO 2008-11-21 13:15:09
Execute step copyRFCExecSec of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:10
Copied file '
i3643vm/sapmnt/PT6/SYS/exe/uc/NTI386/rfcexec.sec' to
'D:/usr/sap/PT6/D02/work'.
INFO 2008-11-21 13:15:11
Execute step callSetDB4PWD of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step unpackJ2EEINSTALL of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step runBatchconfig of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:13
Execute step removeTempDirectory of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:14
Execute step start of component
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0.
INFO 2008-11-21 13:15:14
Starting instance PT6/DVEBMGS00...
INFO 2008-11-21 13:15:15
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:15
Starting instance PT6/D02...
INFO 2008-11-21 13:15:22
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:22
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:35
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\stop_PT6_D02.log.
INFO 2008-11-21 13:15:35
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe name=PT6 nr=02
SAPDIAHOST=I3976vm2 is written to the logfile stop_PT6_D02.log.
INFO 2008-11-21 13:15:43
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\stopsap.exe
name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code 0. Output:
STOPSAP executed succesfully
INFO 2008-11-21 13:15:46
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:46
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:15:48
Creating file C:\Program
Files\sapinst_instdir\ERP\SYSTEM\ORA\HA\ABAP\DI\start_PT6_D02.log.
INFO 2008-11-21 13:15:48
Output of
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386\startsap.exe name=PT6 nr=02
SAPDIAHOST=I3976vm2 is written to the logfile start_PT6_D02.log.
INFO 2008-11-21 13:16:21
Execution of the command "
i3643vm\sapmnt\PT6\SYS\exe\uc\NTI386
\startsap.exe name=PT6 nr=02 SAPDIAHOST=I3976vm2" finished with return code
0. Output:
STARTSAP continues...
INFO 2008-11-21 13:16:21
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:21
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:22
State of instance PT6/D02 changed from ABAP: UNKNOWN to ABAP: UNKNOWN.
INFO 2008-11-21 13:16:50
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:16:50
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Connect to message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:23
Disconnect from message server (i3643vm/3900) succeeded.
INFO 2008-11-21 13:17:24
State of instance PT6/D02 changed from ABAP: STARTING to ABAP: STARTING.
ERROR 2008-11-21 13:17:24
CJS-30105 Instance PT6/D02 reached state UNKNOWN after having state
STARTING. Giving up.
ERROR 2008-11-21 13:17:24
FCO-00011 The step start with step key
|NW_DI|ind|ind|ind|ind|0|0|NW_DI_Instance|ind|ind|ind|ind|10|0|start was
executed with status ERROR .
Thanks in advance.
Regards
ManojHi, I'm Josephine and I almost have the same scenario as this problem reported earlier but it's just that we are using SAP Netweaver 04 SR1.
However, I'm installing additional SAP Application server to our existing one.
Our existing main server is in MS cluster. SAPPRD1 (DB Server in node A) and SAPPRD2 (SAP App Server in node B). System ID is PRD and the CI Instance number is 00. The hostname where the USR folder is SAPPRD (hostname in the cluster environment but this is the SAPPRD2 server in node B).
Now I'm installing additional SAP App server into a new host (SAPPRD3 & SAPPRD4) they are all in the same domain.
But I would like to install the 2nd and 3rd SAP App server in a local host.
While installing there was an error "Output: Service not started" the process "Create or reregister services" during the installation stopped.
I used the installer under the folder InstMaster\IM01_NT_I386\SAPINST\NT\I386\sapinst.exe and run the Dialog Instance under the SAP Netweaver\ABAP System\MS SQL Server\Unicode\.
This is the part of the sapinst log where the error starts:
PHASE 2009-01-28 08:39:29
Preparing DBMS-specific profile parameters
INFO 2009-01-28 08:39:30
Adapt operation t_SAPComponent_Profiles_SHARED processed successfully.
PHASE 2009-01-28 08:39:31
Handle services
INFO 2009-01-28 08:39:32
Creating file C:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_MSS_UC\DI\sapstartsrv.exe.log.
INFO 2009-01-28 08:39:32
Output of C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm' is written to the logfile sapstartsrv.exe.log.
WARNING 2009-01-28 08:39:35
Execution of the command "C:\usr\sap\PRD\D02\exe/sapstartsrv.exe '-r' '-q' '-p' '
sapprd\sapmnt\PRD\SYS\profile\START_D02_sapprd4' '-s' 'PRD' '-n' '02' '-U' 'sapprd4\SAPServicePRD' '-P' 'XXXXXX' '-e' 'sapprd4\prdadm'" finished with return code -1. Output: Service not started.
ERROR 2009-01-28 08:39:35
MOS-01011 'C:\usr\sap\PRD\D02\exe/sapstartsrv.exe' returned with '-1'.
Please help me on this I can't successfully install another dialog instance to add to our existing one now.
Thank you and hoping for your reply.
Yours truly,
Josephine Dejolde -
SAP Dialog Instance is not Starting - DISPATCHER EMERGENCY SHUTDOWN
Hi All,
We are running on SAP ECC 6.0, Oracle 10, Windows 2003.
We have One Central Instance an Two Dialog Instances, we shutdown the SAP system ( Jun 10 15:56:18 2008 ) to do an OFFLINE backup, now one of the Dialog Instances is no starting, we try to restart the system on Wed Jun 11 02:05:45 2008
Oracle is Up and Open.
The Central Instance and one of the Dialog Instances are Up, so you can login on the SAP System, and execute SAP transactions.
I will Attach Our DEV_DISP, and DEV_W0 files:
dev_dip
trc file: "dev_disp", trc level: 1, release: "700"
sysno 02
sid MIS
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 133
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 4008
Wed Jun 11 02:05:45 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (02 4008) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 133 successfully loaded
shared lib "dw_xtc.dll" version 133 successfully loaded
shared lib "dw_stl.dll" version 133 successfully loaded
shared lib "dw_gui.dll" version 133 successfully loaded
shared lib "dw_mdm.dll" version 133 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Wed Jun 11 02:05:50 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPPREC2_MIS_02 <
DpShMCreate: sizeof(wp_adm) 37008 (1480)
DpShMCreate: sizeof(tm_adm) 56268128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 80000 (80)
DpShMCreate: sizeof(appc_ca_adm) 160000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=2000/16/2208064/2208080
DpShMCreate: sizeof(comm_adm) 2208080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (416064/346352/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000CCF0050, size: 59524432)
ERROR => DpShMCreate: ShmCreate SHM_DP_CA_KEY(rc=4) [dpxxca.c 181]
ERROR => DpIPCInit2: DpShMCreate [dpxxtool2.c 462]
DP_FATAL_ERROR => DpSapEnvInit: DpIPCInit2
DISPATCHER EMERGENCY SHUTDOWN ***
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Wed Jun 11 02:05:55 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >SAPPREC2_MIS_02 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
call semaphore clean-up function ...
***LOG Q0E=> DpSigGenHandler, Exception (c0000005) [dpnttool.c 432]
C-STACK -
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Application exception occurred:
Exception : c0000005 (Access Violation)
App : disp+work.EXE (pid=4008)
When : 6/11/2008 2:5:55.274
Threads : 2
Computer Name : SAPPREC2
User Name : SAPServiceMIS
Number of Processors: 4
Processor Type: EM64T Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 11ec
--> (FAULT) Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
0000000007d1f2e0 000000000041a395 0000000000000001 disp+work!DpVmcCheckDebugProxy [dpxxvmc.c (1211)]
0000000007d1f3d0 000000000041d007 0000000005561401 disp+work!DpHalt [dpxxdisp.c (10016)]
0000000007d1fc10 0000000000421a1b 0000000002671ab0 disp+work!DpFatalErr [dpxxdisp.c (17789)]
0000000007d1feb0 000000000042d570 0000000000000000 disp+work!DpSapEnvInit [dpxxdisp.c (1388)]
0000000007d1fee0 000000000040108d ffffffff00000002 disp+work!DpMain [dpxxdisp.c (1076)]
0000000007d1ff10 00000000019c7dd1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000007d1ff70 0000000077d5966c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
0000000007d1ffa0 0000000000000000 00000000019c7c60 kernel32!BaseProcessStart
State Dump for Thread Id 1194
--> Stack Back Trace <--
FramePtr ReturnAd Param#1 Function Name
000000000ccefe40 0000000077d5f651 0000000007d7bc60 ntdll!NtFsControlFile
000000000ccefeb0 00000000018ae00f 0000000000000000 kernel32!ConnectNamedPipe
000000000cceff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000cceff70 0000000077d6b69a 0000000077d6b660 msvcrt!endthreadex
000000000cceffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
call clean-up function ...
SigICallExitRoutine: call exithandler (DpHalt)
DpHalt: shutdown server >SAPPREC2_MIS_02 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
DpShmPrfSwitch : State already set (OFF)
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
And our dev_w0
this file was no modifued since we stop SAP System.
M Tue Jun 10 15:56:18 2008
M *** WARNING => ThSndDelUser: delete client/user 020/RMENDOZA (T60) on server SAPPREC1_MIS_01
S
S Tue Jun 10 19:07:40 2008
S server @>SSRV:SAPPREC1_MIS_01@< appears or changes (state 3)
M
M Tue Jun 10 19:07:52 2008
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
M ThCallDbBreak: use db_sqlbreak
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO YES NO 000 255 255 20080610 144648 SAPPRECDB
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=000000000866D128,usrhp=0000000007D91058)
C Detaching from DB Server (con_hdl=0,svchp=000000000866D128,srvhp=0000000018D61918)
C Now I'm disconnected from ORACLE
B Disconnected from connection 0
B statistics db_con_commit (com_total=29203, com_tx=3253)
B statistics db_con_rollback (roll_total=494, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 2632) [dpnttool.c 327]
Please Some Tips!
Best Regards,
Erick ILarrazaHi Deepak,
Thanks a lot for your reply, in this case the problem was with the Dialog Instance (Only SAP apps, not Oracle).
We shutdown the instance with the Microsoft SAP Management Console (right button -> Stop).
In general to shutdown the SAP System we first:
1. Shutdown The Dialog Instance. (SAP Management Console)
2. Shutdown The Central Instance. (SAP Management Console)
3. Shutdown Oracle (BR*Tools).
4. Stop SAP and Oracle Services.
Maybe is more a problem of Windows Memory Management.....
Best Regards,
Erick ILarraza -
Hi All,
FYI, my SAP PRD running on 3 tier SAP server configuration. Yesterday, after stop the instances, i start the services.
So far 2 servers instances (CI & DI) can be started, but 1 DI server could not be started.I had restart the dialog instance server but the the SAP still can't start.
Below is the log file for DEV_DISP:
trc file: "dev_disp", trc level: 1, release: "640"
Fri Mar 26 15:07:41 2010
kernel runs with dp version 130(ext=102) (@(#) DPLIB-INT-VERSION-130)
length of sys_adm_ext is 312 bytes
sysno 03
sid PRD
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 129
intno 20020600
make: multithreaded, ASCII
pid 3524
***LOG Q00=> DpSapEnvInit, DPStart (03 3524) [dpxxdisp.c 1098]
Fri Mar 26 15:07:42 2010
shared lib "dw_xml.dll" version 129 successfully loaded
shared lib "dw_xtc.dll" version 129 successfully loaded
shared lib "dw_stl.dll" version 129 successfully loaded
shared lib "dw_gui.dll" version 129 successfully loaded
shared lib "dw_mdm.dll" version 129 successfully loaded
Fri Mar 26 15:07:46 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3893]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpIPCInit2: start server >bashful_PRD_03 <
DpShMCreate: sizeof(wp_adm) 18216 (828)
DpShMCreate: sizeof(tm_adm) 2379840 (11840)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (364)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 05830040, size: 2677040)
DpShMCreate: allocated sys_adm at 05830040
DpShMCreate: allocated wp_adm at 058317D0
DpShMCreate: allocated tm_adm_list at 05835EF8
DpShMCreate: allocated tm_adm at 05835F20
DpShMCreate: allocated wp_ca_adm at 05A7AF60
DpShMCreate: allocated appc_ca_adm at 05A7F5B0
DpShMCreate: allocated comm_adm_list at 05A80D20
DpShMCreate: allocated comm_adm at 05A80D38
DpShMCreate: allocated vmc_adm_list at 05AAFB38
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 05AAFB60
DpShMCreate: allocated wall_adm at 05AAFB68
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Fri Mar 26 15:07:47 2010
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 12499 blocks reserved for free list.
ES initialized.
Fri Mar 26 15:07:48 2010
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( sneezyapp) [dpxxdisp.c 9915]
DpStartStopMsg: send start message (myname is >bashful_PRD_03 <)
DpStartStopMsg: start msg sent
Fri Mar 26 15:07:49 2010
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
Release check o.K.
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
Fri Mar 26 15:08:28 2010
ERROR => W0 (pid 2592) died [dpxxdisp.c 12414]
ERROR => W1 (pid 2596) died [dpxxdisp.c 12414]
ERROR => W2 (pid 2624) died [dpxxdisp.c 12414]
ERROR => W3 (pid 2632) died [dpxxdisp.c 12414]
ERROR => W4 (pid 2644) died [dpxxdisp.c 12414]
ERROR => W5 (pid 2648) died [dpxxdisp.c 12414]
ERROR => W6 (pid 2672) died [dpxxdisp.c 12414]
ERROR => W7 (pid 2680) died [dpxxdisp.c 12414]
ERROR => W8 (pid 2700) died [dpxxdisp.c 12414]
ERROR => W9 (pid 2708) died [dpxxdisp.c 12414]
ERROR => W10 (pid 2712) died [dpxxdisp.c 12414]
ERROR => W11 (pid 2720) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0x9b --> 0x9a
ERROR => W12 (pid 2736) died [dpxxdisp.c 12414]
ERROR => W13 (pid 2744) died [dpxxdisp.c 12414]
ERROR => W14 (pid 2764) died [dpxxdisp.c 12414]
ERROR => W15 (pid 2788) died [dpxxdisp.c 12414]
ERROR => W16 (pid 2812) died [dpxxdisp.c 12414]
ERROR => W19 (pid 2852) died [dpxxdisp.c 12414]
ERROR => W20 (pid 2864) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0x9a --> 0x92
ERROR => W21 (pid 2892) died [dpxxdisp.c 12414]
my types changed after wp death/restart 0x92 --> 0x82
And below is the file for DEV_W0:
trc file: "dev_w0", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B Fri Mar 26 15:07:50 2010
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\PRD\D03\exe\dbmssslib.dll' ...
B Library 'D:\usr\sap\PRD\D03\exe\dbmssslib.dll' loaded
B Version of 'D:\usr\sap\PRD\D03\exe\dbmssslib.dll' is "640.00", patchlevel (0.126)
B New connection 0 created
M sysno 03
M sid PRD
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 129
M intno 20020600
M make: multithreaded, ASCII
M pid 2592
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 2592) [dpxxdisp.c 1158]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpShMCreate: sizeof(wp_adm) 18216 (828)
M DpShMCreate: sizeof(tm_adm) 2379840 (11840)
M DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
M DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
M DpShMCreate: sizeof(comm_adm) 192000 (384)
M DpShMCreate: sizeof(vmc_adm) 0 (364)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06030040, size: 2677040)
M DpShMCreate: allocated sys_adm at 06030040
M DpShMCreate: allocated wp_adm at 060317D0
M DpShMCreate: allocated tm_adm_list at 06035EF8
M DpShMCreate: allocated tm_adm at 06035F20
M DpShMCreate: allocated wp_ca_adm at 0627AF60
M DpShMCreate: allocated appc_ca_adm at 0627F5B0
M DpShMCreate: allocated comm_adm_list at 06280D20
M DpShMCreate: allocated comm_adm at 06280D38
M DpShMCreate: allocated vmc_adm_list at 062AFB38
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 062AFB60
M DpShMCreate: allocated wall_adm at 062AFB68
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Fri Mar 26 15:07:51 2010
M calling db_connect ...
C Thank You for using the SLOLEDB-interface
C Using dynamic link library 'D:\usr\sap\PRD\D03\exe\dbmssslib.dll'
C dbmssslib.dll patch info
C patchlevel 0
C patchno 126
C patchcomment MSSQL: Unknown table in FOR ALL ENTRIES (945910)
C Network connection used from BASHFUL to kingdomdb using tcp:kingdomdb
C CopyLocalParameters: dbuser is 'prd'
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C OpenOledbConnection: MARS property was not set.
C
C Fri Mar 26 15:07:54 2010
C Provider Release:08.10.1830
C Provider SQLNCLI could not be initialized. See note #734034 for more information.
C Using provider SQLOLEDB instead.
C
C Fri Mar 26 15:07:55 2010
C Cache sizes: header 52 bytes, 20000 names (26720000 bytes), 1000 dynamic statements (5432000 bytes), total 32152052 bytes
C Using shared procedure name cache KINGDOMDB_PRDPRD_PRD_MEM initialized by another process.
C Connected to db server : [kingdomdb] server_used : [tcp:kingdomdb], dbname: PRD, dbuser: prd
C pn_id:KINGDOMDB_PRDPRD_PRD
C Not using MARS (on sql 8.0)
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20100326 150751 KINGDOMDB
C The IRow interface is supported by this OLEDB provider
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Fri Mar 26 15:07:59 2010
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0A730040, size: 20000768)
M SHM_ROLL_AREA (addr: 61AF0040, size: 268435456)
M SHM_PAGING_AREA (addr: 103C0040, size: 134217728)
M SHM_ROLL_ADM (addr: 0BA50040, size: 2678942)
M SHM_PAGING_ADM (addr: 0BCE0040, size: 525344)
M ThCreateNoBuffer allocated 324144 bytes for 1000 entries at 0BD70040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 7424 bytes (50 server) at 0BDC0040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 22, CON_ID = -1
I *** ERROR => [CreateOsShm] CreateFileMapping(19,97656 KB) failed with Err=1450
ERROR_NO_SYSTEM_RESOURCES: Insufficient system resources exist to complete the requested service. [shmnt.c 2130]
I *** ERROR => ShmCreate: Create (19,99999904,1) failed [shmnt.c 469]
May i know why the dialog instance is down. And I dont know what should i do now. Need your advice.
Thank You
regards,
Anang78Hi,
Some memory parameter must have been changed, which results ERROR_NO_SYSTEM_RESOURCES Messages.
Backup the current DI Instance profile and rename old version of DI Profile (which is having .BAK extension).
Check the "TIME STAMP" when DI instance was working fine to select the backup version of the profile.
Then try again to start the DI Instance and post the log again.
Later you can analyse the system load and tune the parameters accordingly...
If requred, increase the Physical Memory.
Regards.
Rajesh Narkhede
Maybe you are looking for
-
Start a BPM process programmatically
Hi Experts, I am trying to start my BPM process using a button event from WD JAVA. I have created a Web service and I have assigned it with my start step of process. But, problem is in WS Navigator I am able to see that service in Local JAVA AS but n
-
QuickTime still stuttering - How can I talk with a real person at Apple?
Does anyone know how I can get a hold of someone at Apple ( like a real person to talk to )? I'm a PC guy and have never had this much trouble figuring out anything before. All I wanted to do was d'load a song - legally. I got ITUNES>made an account>
-
What is the "deal" wit these points?
10% off a service, store or restaurant? What an insult! i can do better with a coupon or Groupon.
-
Good Morning, I've created a report using <b>REUSE_ALV_GRID_DISPLAY</b>. I want to exclude de boxes for row selection in the left of the grid, how can i do that? This should be basic... Best Regards, Pedro Gaspar
-
Cannot see full email message in outlook 2011 inbox
I can only see trancated emails after a one month, how do I display full email messages in the inbox.