SAP Server Manager Error after BPC installation on domain controller

Hi, I have installed BPC on a domain controller with windows 2003 server (english version). When I launch diagnostic in the "SAP Server Manager" I have the following error message " Current user Name does not have permission for Adminitrators group" . I think that the application it's taking the local user (the diagnistic show that de current user is "server name\user name" instead of "domain name\user name" but I login with the domain Administrator ( this server is a domain controller don't have local users).
Thanks

Hi
I have the same issue that you had.
"I have installed BPC on a domain controller with windows 2003 server (english version). When I launch diagnostic in the "SAP Server Manager" I have the following error message " Current user Name does not have permission for Adminitrators group" . The application it's taking the local user (the diagnistic show that de current user is "server name\user name" instead of "domain name\user name" but I login with the domain Administrator ( this server is a domain controller don't have local users)."
Can you please let me know how you solved this ?
thanks & regards
Lokesh

Similar Messages

Can not refresh server manager Error:0x8007045b

OS: Windows 2012 R2 Core
Services: Hyper V
I was trying to remote reboot and the session hung. No worries I decided I could just reboot the next morning. So I rebooted the next day but when I go into server manager I get
an errror can not refresh server manager Error:0x8007045b. Did some research found suggestions to fix it using a DISM.exe /Online /Cleanup-image /Restorehealth.
But then I get an error 1115 A system Shutdown is in progress. I attempt to fix this issue using pskill winlogon but the issue pursistest. I have restarted the server several times now. Not sure how to fix this.
Thanks in advance,
Jake

Hi,
In addition to the above information,
Checkout the below thread for similar discussion,
http://social.technet.microsoft.com/forums/windowsserver/en-US/a700e9f6-4491-4c70-8bd0-d9d3111e2f70/windows-reboot-error
Regards,
Gopi
JiJi
Technologies

WIndows Server 2012 - Server Manager Error CLR20r3

WIndows Server 2012 - Server Manager Error CLR20r3
I have just experienced this error of ( CLR20r3) when trying to add or remove server roles.
Server Manager crashes when trying to go into the Add/ Or Remove server roles
What I have tried.
.NET Diag
.NET Fix
Lots of research, and didn't find any resolution.
Apparently this is not strictly tied to Windows Server 2012, as I see that Windows Server 2008 R2 , and even Windows desktop users have experienced this issue. With no direct resolution.
Here is a screen shot for reference.......
If anyone should obtain the MS Fix or hear of it, please post so that others who are experiencing this issue can find peace in their day.
I have given up, ended up performing a reinstall. ( sadly)
RF

Hi RF,
Based on your description, would you please refer to following operations and troubleshoot this issue?
Please use
Sytem File Checker tool to scan all protected system files.
Please
perform a clean boot to check if some third-party services affected.
Please backup the registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Ole. Then delete following two registry key (if exist): LeagcyImepersonationLevel and LegacyauthenticationLevel
Then log off and logon and monitor the result.
In addition, please navigate to %windir%\logs and check ServerManager and CBS log file if you can find some
relevant errors.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

DirectAccess Server 2012 Configuration cannot be retrieved from domain controller

Hi everyone,
We are using DirectAccess over Server 2012. There is just one server, no load balancing.
Everything works fine, all clients can connect successfully and operations status page shows all in green. Nevertheless on the dashboard page in the configuration status section it say “Configuration for server [servername] cannot be retrieved
from the domain controller.”
I found a few hints what could cause this problem:
In my case, the RAConfigTask, a scheduled task, was not enabled on the affected WS2012 server (DA entry point in a multisite deployment). After just enabling it, the errors has gone."
http://blog.gocloud-security.ch/2013/01/11/ws2012-directaccess-and-the-configuration-for-server-server-name-retrieved-from-the-domain-controller-cannot-be-applied-error/
Group Policy was filtering out my DA server from the GPO object for some reason. To fix, I opened up Group Policy Management on the domain controller and made sure that my DA server was a part of the group."http://www.joedissmeyer.com/2012/12/more-issues-and-solutions-for.html
Server has no connectivity to the domain in order to update the policies. Run “gpupdate /force” on the server to force policy update. GPO replication might be required in order to retrieve the updated configuration.
This could be because there is no writable domain controller in the Active Directory site of the Remote Access server. http://social.technet.microsoft.com/Forums/en-US/winserverNIS/thread/56fedb17-1274-4e1a-b2d0-fea809f0bc45
I checked everything. Task is enabled and completed successfully, GPO is not filtered out, run gpupdate without any errors, could connect to domain controller, no errors on domain controller, domain controller is writable.
So, I have no idea what could cause this error. Any ideas or hints?
Thanks
Regards
Sebastian

i have the exact same problem i figured out that there was a problem with the logon as a service
secpol.msc --> Local Policies --> User Rights Assignement, Logon as a service i have NT Service\All Services
i can acces the group policy via the cpnsole just fine i have not connectivity issues what so ever.
i decided to open a call with microsoft, their suggestion .... we dont know reinstall so i did and here we are same problem and no solution. it is getting frustrating...

BPC error after the installation

Hi Experts,
I have completed BPC 7.0 SP2 installation and connected BI 7.0 instance (EHP1 installation completed sucessfully, added BPC add-on). i installed BPC Admin client and connected to APSHELL but when i am trying to create new app set by coping existing one or try to modify any task profiles, i am getting errors like GetTaskProfileData() with object refreence not assigned. log file showing below error.
==============[BPC Exception Logging]==============
[Message Type] : ERROR
[Job Name]     : ReleaseAllLockOfUser
[DateTime]     : 2/26/2010 2:25:35 AM
[UserId]       : SYNOPSYS\venkatrd
[Exception]
    DetailMsg : {Method OSoft.Services.Webservice.FileAccessService.FileAccessService.ReleaseAllLockOfUser not found.}
==============[BPC Exception Logging End ]==============
please suggest on this bcoz i stuck up in the middle of this task.
thanks
Venkata

Hi All,
thank you all for your valuable time for me.
i am able to trace out the issue, this was cuased with "Message Queue" format, i followed as per the installation document like queue name is Private$\bpcmessagequeue , it went fine last installation and worked fine.
but this time, i have given same format but system configuration file has taken into wrong format and unable to read task status from queue cuased the issue. i have correct using below format.
<HOSTNAME>\$Private\bpcmessagequeue, this format for remote queue, but even requesting same format for local queue also.
anyway thank you all once again for your efforts.
thanks
Venkata

I fail to start the sap server with error:Operating system call recv failed

I fail to start the sap server in SAP R3 Management Console and the message in the syslog was :
R/3 Basis System: Operating system call           recv failed (error no. 10053)
Is there any one could tell me how to resolve the problem or give me some advice?I will appreciate him/her very much.Thank you.

trc file: "dev_disp", trc level: 1, release: "620"
Sun May 07 13:14:30 2000
kernel runs with dp version 3(ext=1) (@(#) DPLIB-INT-VERSION-3)
length of sys_adm_ext is 304 bytes
systemid   560 (PC with Windows NT)
relno      6200
patchlevel 0
patchno    674
intno      20020600
pid        3628
***LOG Q00=> DpSapEnvInit, DPStart (00 3628) [dpxxdisp.c   978]
     shared lib "dw_xml.dll" version 674 successfully loaded
     shared lib "dw_xtc.dll" version 674 successfully loaded
     shared lib "dw_stl.dll" version 674 successfully loaded
Sun May 07 13:14:32 2000
WARNING => DpNetCheck: NiAddrToHostCanon() took 2 seconds
Sun May 07 13:14:37 2000
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3212]
MtxInit: -2 0 0
DpShMCreate: sizeof(wp_adm)          12784     (752)
DpShMCreate: sizeof(tm_adm)          1690816     (8412)
DpShMCreate: sizeof(wp_ca_adm)     18000     (60)
DpShMCreate: sizeof(appc_ca_adm)     6000     (60)
DpShMCreate: sizeof(comm_adm)     192000     (384)
DpShMCreate: sizeof(wall_adm)     (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY          (addr: 001E0040, size: 1977824)
DpShMCreate: allocated sys_adm at 001E0040
DpShMCreate: allocated wp_adm at 001E0560
DpShMCreate: allocated tm_adm_list at 001E3750
DpShMCreate: allocated tm_adm at 001E3778
DpShMCreate: allocated wp_ca_adm at 00380438
DpShMCreate: allocated appc_ca_adm at 00384A88
DpShMCreate: allocated comm_adm_list at 003861F8
DpShMCreate: allocated comm_adm at 00386210
DpShMCreate: allocated ca_info at 003B5010
DpShMCreate: allocated wall_adm at 003B5018
MBUF state OFF
Sun May 07 13:14:38 2000
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 2458 MB
<ES> 2457 blocks reserved for free list.
ES initialized.
***LOG Q0K=> DpMsAttach, mscon ( db01) [dpxxdisp.c   9115]
CCMS: Initalizing shared memory of size 20000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6200, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   941]
DpMsgAdmin: Set patchno for this platform to 674
Release check o.K.
Sun May 07 13:15:18 2000
ERROR => W2 (pid 4776) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W2
Sun May 07 13:15:38 2000
ERROR => W5 (pid 4548) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W5
ERROR => W8 (pid 4592) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W8
ERROR => W9 (pid 4584) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W9
ERROR => W12 (pid 4676) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W12
ERROR => W13 (pid 4272) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W13
my types changed after wp death/restart 0xbf --> 0xb7
Sun May 07 13:15:58 2000
ERROR => W4 (pid 4888) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W4
ERROR => W6 (pid 4788) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W6
ERROR => W15 (pid 4596) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W15
Sun May 07 13:16:18 2000
ERROR => W1 (pid 4892) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W1
ERROR => W3 (pid 4904) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W3
ERROR => W7 (pid 4000) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W7
ERROR => W10 (pid 4864) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W10
my types changed after wp death/restart 0xb7 --> 0xb5
Sun May 07 13:16:38 2000
ERROR => W0 (pid 4900) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W0
ERROR => W11 (pid 4500) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W11
ERROR => W14 (pid 4636) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W14
ERROR => W16 (pid 3532) died [dpxxdisp.c   11523]
force unlock of wp_adm mutex W16
my types changed after wp death/restart 0xb5 --> 0x80
DP_FATAL_ERROR => DpEnvCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
DpModState: change server state from STARTING to SHUTDOWN
Sun May 07 13:16:42 2000
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c   9341]
MBUF state OFF
MBUF component DOWN
***LOG Q05=> DpHalt, DPStop ( 3628) [dpxxdisp.c   7883]

Server Manager error 0x80070422 - Roles and features are not accesible

Hi
I cannot view Roles and Features in Server Manager on my Server 2008 R2 box. The error is:
Unexpected error refreshing Server Manager: The service cannot be started, either because it is disbaled or because it has no enabled devices assicaited with it (Exception from HResult: 0x80070422)
I have looked at my services - but don't know what service to look for, everything seems to be in order.
After some investigation on the net, I understood that I need to setup the win readiness tool, I did and the output in CheckSur file is as follows
=================================
Checking System Update Readiness.
Binary Version 6.1.7601.21645
Package Version 12.0
2011-05-31 19:02
Checking Windows Servicing Packages
Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x00000000 servicing\Packages\Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.mum does not match the actual
file name
(fix) CBS MUM Corrupt CBS File Replaced Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.mum from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-apr29.cab.
(fix) CBS Paired File CBS File also Replaced Package_for_KB2296199_RTM~31bf3856ad364e35~amd64~~6.1.1.1.cat from Cabinet: C:\Windows\CheckSur\v1.0\windows6.1-servicing-x64-apr29.cab.
Checking Package Watchlist
Checking Component Watchlist
Checking Packages
Checking Component Store
Summary:
Seconds executed: 4058
Found 1 errors
Fixed 1 errors
CBS MUM Corrupt Total count: 1
Fixed: CBS MUM Corrupt. Total count: 1
Fixed: CBS Paired File. Total count: 1
Here again, it seems that everything is fine.
Thanks in advance for your help

Hi,
Please try to install Windows Server 2008 R2 Service Pack 1 directly and check the result. Service Pack 1 for Windows Server 2008 R2 includes all the
previous released Windows Updates and hotfixes.
If it does not work, you will need to copy these files from another working Windows Server 2008 R2 system to replace the corrupt ones.
Otherwise, you will need to perform an In-Place upgrade to repair the system.
Regards,
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

SAP Client to the SAP Server: internal Error (-1102)[Message 131-183]

Hi,
We are using Windows 2008 Server R2, SQL 2008 Standard, SAP B1 8.81 PL08.
When we trying to connect SAP Client to the SAP Server. There has internal Error (-1102) occurred. We can view the database on client, but we always get the same error message after enter the User ID and Password. We have checked the native client and it is installed and also opened the following ports: 1433, 30000, 30001. We have tried to open all of firewall, but itu2019s no use.
When I set a computer in to the engine room and set the network connection, this one can connect SAP Client to the SAP Server.
But when client connect to server by VPN, the IP address will not in the same section. Then We tried to set the IP address has the same network section with the server, but it's still disable.
I set a computer for SAP Server without firewall, complex network, virtual IP and no router in my office. And use a SAP Client which is in different network domain to connect to SAP Server by internet, not VPN, but the SAP Client still canu2019t connect to SAP Server. I get the same internal Error (-1102).
It can not only ping to SAP Server IP, but telnet to the port 1433, 30000, 30001, 445.
When I use a pc with server tools, it can connect to the SAP Server by the localhost license. But if I use a computer only install client and assign the server license. The latter one always got the error.
How could we solve this problem? Is there has another setting I am missing which might be blocking the connection?
Thanks in advance.

Hi,
We are using VPN and using Terminal Licensing or Remote Desktop Conneciton.
The idea here is VPN will connect you to the network and when you are connected to the network
dont use the direct LAN IP connection use the Terminal Licensing to connect.
Again both are needed VPN and Terminal Licensing. VPN for the connection and if successfully connected
use or connect from Terminal Licensing or Remote Desktop connections.
Thanks.
Clint

Initial Settings in SAP PI 7.3 after System Installation

Hi,
We are installing SAP PI 7.3 here. After media installation by BASIS team, what all other things an SAP PI consultant should maintain/configure(initially before start working on scenarios) ?
Since I have worked on SAP PI scenarios where the SAP PI server was completely ready(set up). This is the 1st time I'm working on completely new SAP PI system.
So please guide me at the earliest.
Thanks,
Amit Patil

Hi All,
This document explains more of "How to set up demo examples?"
But I want to do initial settings in fresh SAP PI 7.31 system post-installation. Since I have not done this before at all, I need the help step by step.
I am aware of what all things to be done in fresh SAP PI system like
RFC connections between ECC-PI and CRM-PI,
SLD connections between ECC-PI and CRM-PI,
Maintain Integration and Application Systems in SLD,
Checking Adapter & Integration Engine Status in PI,
Etc.
Please I need help desperately. -
Thanks,
Amit Patil
Message was edited by: Moderator

Installing SAP solution manager error

Hi all,
I install SAP solution manager on a distributed system with Oracle database. I am installing "database instance" step. I found a error in second step "install common file"of installation. And the log file is
INFO 2009-07-21 18:46:46.454
Removed environment variable SAPDATA_HOME from current process environment.
INFO[E] 2009-07-21 18:46:46.460
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-07-21 18:46:46.530
FCO-00011 The step createDefaultProfile with step key |NW_Doublestack_DB|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createDefaultProfile was executed with status ERROR .
Please help me..
Thanks
Duypm

Hi all,
This is my new logfile
INFO 2009-07-24 14:11:07.403
Removed environment variable DIR_LIBRARY from current process environment.
INFO 2009-07-24 14:11:07.403
Removed environment variable THREAD from current process environment.
INFO 2009-07-24 14:11:07.403
Removed environment variable dbms_type from current process environment.
INFO 2009-07-24 14:11:07.404
Removed environment variable dbs_ora_tnsname from current process environment.
INFO 2009-07-24 14:11:07.404
Removed environment variable dbs_ora_schema from current process environment.
INFO 2009-07-24 14:11:07.404
Removed environment variable ORACLE_SID from current process environment.
INFO 2009-07-24 14:11:07.405
Removed environment variable DB_SID from current process environment.
INFO 2009-07-24 14:11:07.405
Removed environment variable ORACLE_BASE from current process environment.
INFO 2009-07-24 14:11:07.405
Removed environment variable TNS_ADMIN from current process environment.
INFO 2009-07-24 14:11:07.406
Removed environment variable NLS_LANG from current process environment.
INFO 2009-07-24 14:11:07.406
Removed environment variable SAPDATA_HOME from current process environment.
ERROR 2009-07-24 14:11:07.413
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
ERROR 2009-07-24 14:11:07.475
FCO-00011 The step createDefaultProfile with step key |NW_Doublestack_DB|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|6|0|createDefaultProfile was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
Please help me....
Thanks
Duypm

Hyper-V Server Manager -Error occurred during enumeration of Data Deduplication volumes

Hi Experts,
I having this problem in my Hyper-V Server Manager. Can somebody tell me why this happening? Inside my Hyper-V, I has been installed Microsoft DPM 2012 and both Hyper-V is cluster. Please advice.

Hi Tyler,
I had the same problem until I unlocked (BitLocker) the HDD causing the error message.

Server Manager Error, Windows Server 2012 Standed

Windows
Server 2012 on my desktop
and I've been in it then
open Server Manager "ServerManager.exe - This application could not be started"
error this time. In it,
the option is YES and
NO. YES is open
to the side of .net.
Please help me as soon as possible.

Hi,
Please check the event viewer to get more detailed error information about this issue.
You can also remotely access it from another server by adding this server in the server manager of the remote server, and try to access the roles and features from the remote server, and tackle the problem from there.
I hope this helps.

SAP server shuts down after 1 minute

I installed SAP R/3 4.6c on an external hard drive (160 GB), w2K, RAM 512, Oracle 8.1.7. As soon as I start the sap server using the MMC, after 1 minute the server shutsdown. I checked the oracle services, they are running as well as the SAP ones.
Could anyone help on this matter?
Thanks in advance for your time.

Do you mean that Server is booting when you executing MMC
TIPS HERE
===========
Don't go to SAP-MMC and wait for some minute. if booting then you should apply SP4 on W2k server.

Disks Not Displayed in Server Manager 2012 After Upgrade

I have two identical IBM x3650 M3 servers with the M5014 RAID controller installed. The internal SAS drives are configured with three RAID 5 logical drives, basically a C:, D:, and E:. They also have an external eSATA drive with a Silicon Image eSATA
card installed that is used for backup. Both servers were upgraded from Server 2008R2 to 2012R2. Both of the server's firmware was updated prior to the upgrade and are using the same versions.
On the first server, all of the RAID controller's logical drives are displayed under Server Manger > File and Storage Services > Volumes > Disks. All of the volumes on these drives and the eSATA drive are displayed correctly under Server
Manger > File and Storage Services > Volumes.
On the second server, all of the volumes correctly displayed under Server Manger > File and Storage Services > Volumes. However, only the first logical drive is displayed under Server Manger > File and Storage Services > Volumes
> Disks. The other two logical drives are not displayed. The drives show up correctly under Disk Management and Device Manager. All of the data and shares are accessable and the server functions like it did before the upgrade. While it doesn't seem
critical at the moment, I would like to find out why the logical drives are not being displayed.

Hi,
Did you have a failover cluster with a highly available storage solution that uses LSI MegaRAID controllers and use Server Manager to manage the storage using the LSI SMI-S storage provider? If so, the associated physical disks may not appear correctly in Server
Manager when you create storage pools or virtual disks from the storage pools.
To work around this issue, run the following Windows PowerShell cmdlet on all nodes, and then refresh the Server Manager UI:
Update-StorageProviderCache –DiscoveryLevel Full
For more detailed information, please refer to the article below:
Known Issues: File and Storage Services in Windows Server 2012
http://social.technet.microsoft.com/wiki/contents/articles/13392.known-issues-file-and-storage-services-in-windows-server-2012.aspx
Best Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

DPM 2010 agent installation on Domain Controller

Hello all, recently I tried to install the agent from my DPM 2010 server onto a Win2K8 Domain controller which failed (used a Domain Admin's credientials for the install, and on trusted domain). I remember in DPM 2007 you needed to install the agent through
command line. Can someone post up the correct steps to get a DPM 2010 agent installed to a DC?

Same issue here.
Pushing a DPM 2010 agent to a Windows 2008 DC fails with the error:
============
You cannot install the protection agent on SV-MGMT-03.xxxxxx.nl because access to the computer has been denied.
============
The DPM 2010 agent software is installed but DPM doesn't add the server. With an attach i can add the server but DPM 2010 cannot communicate with it.
===============
Protection agent version: 3.0.7696.0
Error: Data Protection Manager Error ID: 270
The agent operation failed on sv-mgmt-03.xxxxx.nl because DPM could not communicate with the DPM protection agent. The computer may be protected by another DPM server, or the protection agent may have been uninstalled on the protected computer.
If sv-mgmt-03.xxxxxxx.nl is a workgroup server, the password for the DPM user account could have been changed or may have expired.
Recommended action: Check the following to troubleshoot this issue:
1) If the agent is not installed on sv-mgmt-03.xxxxxxxxx.nl, run DpmAgentInstaller.exe with this DPM computer as a parameter. For details, see the DPM Deployment Guide.
2) To attach the computer correctly to this DPM server, run the SetDpmServer tool on the protected computer.
3) If the computer is protected by another DPM server, or if the protection agent has been uninstalled, remove the protected data sources on this computer from active protection. Then, remove the entry of this computer from the Agents tab in the Management
task area.
4) If sv-mgmt-03.xxxxxxxxx.nl is a workgroup server, run SetDpmServer with the -UpdatePassword flag on the protected computer and Update-NonDomainServerInfo.ps1 on the DPM server to update the password.
5) If the DPM server and the protected computer are not in the same domain, ensure that there is a two-way trust setup between the two domains.
If the computer is protected by another DPM server, or if the protection agent has been uninstalled, you can remove the record of the computer from this DPM server.
==============
Anyone a solution for this?

SAP Server Manager Error after BPC installation on domain controller

Similar Messages

Maybe you are looking for