SAP server shuts down after 1 minute

I installed SAP R/3 4.6c on an external hard drive (160 GB), w2K, RAM 512, Oracle 8.1.7. As soon as I start the sap server using the MMC, after 1 minute the server shutsdown. I checked the oracle services, they are running as well as the SAP ones.
Could anyone help on this matter?
Thanks in advance for your time.

Do you mean that Server is booting when you executing MMC
TIPS HERE
===========
Don't go to SAP-MMC and wait for some minute. if booting then you should apply SP4 on W2k server.

Similar Messages

  • Mac shuts down after 5 minutes  Help!!!!

    My computer: imac G3, DV Special Edition, 500Mhz, 384 mb ram, 80 gig hard drive
    This is an odd one...like many others before me the computer just died one day. it would not start up, no sounds, just dead. A few minutes later I tried to turn it on and it came on, but 5 minutes later, it died.
    This is the strange part. I took the plug from the socket and waited a few minutes, then pluged the computer back up. It came on. But only for a few mintes and again shut off.
    This time I left the plug in the socket, waited a few minutes and tried again. Nothing.
    I then took the plug out waited about 30 minutes and it came back on for about 5 minutes and shut down. It only seems to come on if I let the computer sit idle with the plug out.
    I have noticed that the computer does not keep time properly.
    What I have done.
    1. I have pressed the Cuda Button, and yes it did start up, but only for about 5 minutes.
    2. I have tried to reinstall the system hardware, but the computer dies before completion.
    Should I replace the battery? What else can be done?
    Help!

    I have the same problem. I don't have good news, though. I have replaced the battery, pressed the reset button, even replaced the power supply board (not the video board -- which is the only thing I have decided I'm not willing to do). My computer usually shuts down after 5 minutes, but will sometimes stay working fine for a couple of hours. I managed to update the firmware and OS to the very latest, but still it dies. Mine will also occasionally flicker and freeze, which can be restarted by holding down the power button.
    I would replace the video board, except the people trying that don't have quite the same problem (theirs don't start up at all), and there is no source I've found that would have new boards, so you would get a bad board, or the same problem eventually. Some people point to a transformer on the video board, but again the symtoms are not quite the same (they smell burt electronics or hear a hissing/crackling sound before it dies.
    I have just packed mine away and I'm working on a new G5, but I sure hope the old iMac can be fixed so my kids can use it. I just didn't want you to have to go down the same road just to find nothing helped. Good luck, and if you have any new ideas, I would be glad to hear them.

  • Macbook Air 11" shuts down after few minutes running

    My Macbook Air 11" from mid 2012 shuts down after few minutes running, it is a laptop with very light use. The first time this happen was trying to upgrade to OS X Mavericks, after this I read it was maybe an overheating and definitely the case was hot, after this I placed the computer right in front the AC to finish the upgrade, finally I successfully upgrade the OS but the problem continue. I bring my Mac to service and now they said it is a Video Card problem, it doesn't make to much sense for me. Can somebody let me know if this could be a Video Card problem?

    At what point is the shutdown occuring? As soon as you launch the install app?
    If so, I would trash the install app file, and re-download it.
    First, you might try running a Repair Permissions & a Verify Disk from the Recovery Partition. It is always a good idea to do this before any major software update/upgrade.

  • Apple TV radio shuts down after 10 minutes

    Apple TV radio shuts down after 10 minutes.  Can not find out why.  Could version 7.0 be the problem?

    Welcome to the Apple Community.
    Seems to be an issue for a large number of users, probably need to wait for a fix.

  • HP 15-f009wm shuts down after one minute

    HP 15-f009wm, shuts down after one minute at idle. If you are doing something on it, like moving the mouse, it will stay on. I tried to go in, and change the power plans, and the options pertaining to this, but no help at all. I even tried to take the password off, so my wife wouldn't have a hard time trying to put it in, everytime it shuts down.  I seen the option, marked it, and it still needs the password to open it.

    If you have a virus and malware infestation, they you will have to certainly address that. This might be a good starting point to attempt to clean your system: Resolving and Preventing Viruses on Your Computer (Windows 8)
    This is one way you can prevent or at least reduce potential infection in the future:
    Using Windows 8 Defender to Prevent Virus and Spyware Problems
    Some virus and malware are very tough to remove. This may be the quickest way to clean your system and start over. If you do this, you may want to take the time to clean any external drives you may have (ie. USB Sticks) as to not potentially infect your system again: Performing an HP System Recovery (Windows 8)
    I hope this helps.
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My nano shuts down after one minute of use, why?  Brandnew

    My nano shuts down after one minute of use and it doesn't matter if I'm using the radio or playlist.  This is brand new so I've only ever listened to 1 minute of a song. Help

    Kevin,
    This usually happens when your headphones/earbuds aren't plugged all the way in. Double check the connection of the headphones and make sure the jack is free of debris.
    B-rock

  • Why is my iphone coming on only connected to a PC and then shutting down after 1 minute???????

    Seriously need help. My phone is going crazy right after ios is installed. It turns on only with a PC and then shuts down after 1 minute?  Never thought Id have problems with Apple.

    I have had the same problem with my daughter's IPOD nano. Spoke with several technicians to try to fix the problem to be told it was a battery problem and to send it in it was covered under warranty. Was told that it was a problem with many of the nanos. I sent it in to have it returned with 1 week stating that it had "liquid spill or submersion damage indicated by the pink/red color of liquid submersion indicator located inside headphone jack." It has not had liquid or submersion damage and I can't prove otherwise. It works only if it is attached to computer. Will not turn on unless attached to computer. Maybe I am wrong but it it has damaged by water would it still work plugged into computer. Now I am out $200.00. This frustrates my because my ipod shuffle quit working 2 months after I got it. Thats why I bought the nano thinking it was better quality.

  • App shuts down after a minute or so for no reason

    Hi
    I'm using Jbuilder7 and mobileset3, when I start my app it shuts down after about a minute for no reason or warning, even when i run it in debug. It was working fine before, and I can't figure out why.
    Thanx
    Gerard

    I found what was causing this problem, it was my firewall for some unknown reason. when I disabled it the app worked fine.
    Any one know why it does this
    Gerard

  • My macbook shuts down after 5 minutes

    My macbook shuts down after 5 - 10 minutes, and I have to restart it each time. Can anyone help me with this? I've tried resetting the PRAM, re-instatlling the OS, switching HDD's. I asked a friend of mine what it could be and he said it may possibly be the power switch button. Any answers out there?

    Have you tried resetting the System Management Controller? That is a good first step for power related issues such as this.
    If that doesn't do it, you are looking at a hardware repair.
    Best of luck.

  • MacBook OSX 10.5.5 shuts down after 30 minutes of inactivity

    If I leave my MacBook unattended, it shuts down after exactly 30 minutes. It asks me if I'm sure I want to Logout. This also happens when I've got iTunes running and listening to music but away from my computer for the 30 minutes. I've tried changing the Sleep options in Energy Saver (System Preferences) but to no avail. Not sure if this was an issue before I downloaded 10.5.5 onto this computer because I've only just begun listening to iTunes through this computer and new speakers and thus been leaving the computer unattended for this length of time. The MacBook is almost 1 year old. I've got it plugged in to power.
    I'd appreciate any suggestions on how to prevent this.

    Figured it out myself. MacBook wasn't actually shutting down, but rather logging out. Went to System Prefs,; Security; and unchecked logout after _ minutes of inactivity.

  • MBP shuts down after 30 minutes of inactivity

    Hello - I've posed this question before and thought it was solved but it has come back.  My MBP (circa 2008) with OS 10.6.8 continues to attempt a shut down after about 30 minutes of inactivity.  If there is an open app it prevents the shut down but it sure is annoying. 
    Does anyone have ideas on how to prevent this?  (Please note I am talking about a complete shut down - not going to sleep.)
    Thanks!

    Thanks Carolyn,
    I worked my way through the options and then eventually tried the reset.  Bummer, no luck.  My MBP still tries to shut off after a half hour passes.  It's odd that the timing is so consistent, yet there are no settings I can find that would cause this shut down.

  • G570 shuts down after 20 minutes

    First of all I need to tell how disappointed I am with my first ever Lenovo purchase.  I was told Lenovo machines are very solid machines but it has staretd giving me problems after 1 day use.
    My new laptop shuts down after 20-25 minutes when on battery.  The last time, the screen went completely distorted with colorful lines before shutting down.  Can someone tell me why this could be happening?
    I am getting it replaced with an Acer the first thing in the morning.

    hi usmanz.
    sorry to hear that but could be hardware/software issue.
    to make sure it's hardware, can you perform clean windows installation by pressing one key recover button first?

  • MacBook is starting to shut down after 5 minutes.

    My MacBook has just started to shut down after 5-10 minutes. The computer still holds a charge, and the battery Percentage says that it's full, so I dont know what's going on.

    If it's under AppleCare take it in immediately.
    It is possible that a fan might not be working, and causing it to overheat & shutdown as a safety measure.
    The other reason could be RAM.
    But that's just my guess.

  • While using Facebook, my iPad shuts down after 5 minutes,so annoying,didn't do this before the upgrade!!

    Why does my iPad shut Dow after 5 minutes?? So annoying, did not do this before ios7.

    Have you reset the device? Hold down the home button along with the power button until you see the Apple, then let go. You can also try Settings > General > Reset > Reset all settings

  • Macbook 2006 fully charge shuts down after 5 minutes

    my macbook (see below) shuts down after about 5 minutes of fully charged use when the power supply is disconnected. I've upgraded.
    Model Name: MacBook
    Model Identifier: MacBook2,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 3 GB
    Bus Speed: 667 MHz
    Boot ROM Version: MB21.00A5.B07
    SMC Version (system): 1.13f3
    Serial Number (system): W87060KSWGM
    Hardware UUID: 00000000-0000-1000-8000-0017F2D1949B
    Sudden Motion Sensor:
    State: Enabled

    Hello to all Macs
    I've got a similar problem with my Mac. Some days now I am experiencing this:
    I work on a fully charged battery and suddenly the computer "sleeps". Only one led light on the battery cover flashes. The computer "awakes" only if I connect the power adapter. Then the battery indicator on the right upper corner of the screen shows that the battery has to be charged, and it charges fully in a mater of minutes. This hasn't happen before and I am thinking that the battery may be drained and needs replacement. Any suggestions? I've already done the SMC reset as suggested in the previous message by Lyssa.
    *System Power Settings:*
    AC Power:
    System Sleep Timer (Minutes): 10
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 5
    Automatic Restart On Power Loss: No
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Wake On LAN: Yes
    Display Sleep Uses Dim: Yes
    Battery Power:
    System Sleep Timer (Minutes): 5
    Disk Sleep Timer (Minutes): 10
    Display Sleep Timer (Minutes): 1
    Wake On AC Change: No
    Wake On Clamshell Open: Yes
    Display Sleep Uses Dim: Yes
    Reduce Brightness: Yes
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 2886
    Remaining Capacity (mAh): 1789
    Amperage (mA): -1200
    Voltage (mV): 11305
    Cycle Count: 190

Maybe you are looking for

  • Calling RFC in BPM

    Hi ,       My requirement is to create a background Job in XI using a set of function modules BAPI_XMI_LOGON BAPI_XBP_JOB_OPEN BAPI_XBP_JOB_ADD_ABAP_STEP BAPI_XBP_JOB_CLOSE BAPI_XBP_JOB_START_IMMEDIATELY BAPI_XMI_LOGOFF I am calling these function mo

  • AVCHD to DVD:  Really ugly results

    Basically what I'm trying to do is take AVCHD (off of a canon HG10 camera) and burn the movie onto a DVD to be played in 'normal' dvd players.  When I do this, the video is downright blurry.  When I render to a test file that is in 720 or 1080 its fi

  • Upgrade to ML seems to have knocked out Key Repeat?

    I've been on ML for a couple of weeks now and have just noticed that I cannot get the Key Repeat to work when holding down letter or number keys. It works fine for punctuation marks and symbols. Is it possible to produce a line like this mmmmmmmmmmmm

  • Hardening Solaris 10

    Hello, I am in the process of locking down a new Solaris 10 box. I have run JASS (using some pretty generic scripts) but running nmap over the box shows the following ports are open: 22/tcp open ssh 111/tcp open rpcbind 4045/tcp open lockd 32771/tcp

  • Query Structure

    Hi I want to create a 2 structure in a column with 2 keyfigures and one(1)  Characteristics  But i don't know how to proceed when i created the structure and trying to  add Characteristics it is not accepting please some one suggest me my query outpu