SAP SFTP- PIB2BSFTP - multiple folders in sender

Hello,
We are in need of using multiple folders option in sender SAP SFTP adapter.Our existing SAP SFTP patch does not have multiple folders.To what patch or version of PIB2BSFTP we need to update to get multiple folders option? I read in SCN that SAP already released patch to get multiple folders option in sender SAP SFTP adapter
Below are few details about out PI 7.30.
Dual stack
SP level 009
We installed B2B add on to get SFTP and PGP adapters for SAP PI 7.30.
our PIB2BSFTP version as seen in NWA is 1000.1.00.2.3 20131126032500.
Please let me know.
thank you,
Sathish

You just need to deploy the latest sca and import the new ESR content. It is still part of the security add on ( No additional licence)
SAP NetWeaver and complementary products ->PI SFTP PGP ADDON ->PI SFTP PGP ADDON 1.0->

Similar Messages

Picking files from multiple folders based on name send to destination folde

Hi,
I want to pick multiple files from multiple folders with one root folder. Based on file name I want to send it to diffirent folders. No need to go for message mapping. Can anyone suggest me.
Thanks & Regards,
Prasad Kotla.

Hi Prasad,
to pick the files from multiple source directory, can use "Advance Selection for Source File" in Sender CC.
If you wand to develop a Scenario without Message mapping, develop a scenario as "Sender as Virtual receiver"
This option is available in Sender agreement, just give the dummy name for Msg Interface and Namespace, Name defined should be same in Rec Agreement.
Develop only: Sende CC, Receiver CC, SA, RA
No need to develop ID and RD as no mapping is involved.
If u want to send the files to different folders of receiver side, just develop the adapter module which changes the directory based on the sender filename.
If the sender and receiver directory is same than check the "adapter specific Msg Attribute" and "directory" checkbox in both the sender and receiver CC. in this case no need to develop Custom module for changing the directory. files will be automatically placed in the path they were picked from sendor directory
appreciate if useful
regards,
chandra shekhar

(RFC vs files), where Sender SAP and receiver multiple system

Publish and Subscribe using BPM or Without BPM (RFC vs files), where Sender SAP and receivers multiple system,.
This is my 1st BPM scenario in sandbox system
For this scenario
I Created 2 Data types
2 MT,
Service interface:
Request interface Mode:Asynchronous
Abstract Req interface,Mode:Asynchronous
Response Interface,Mode:Asynchronous
Abstract Respomse Interface ,Mode:Aysnchronous
Synchronous Interface ,Mode:Synchronous
2 Message mapping for Req and Resp
1 Operation Mapping
BPM design: Plz find the attatchement
Can anyone please help me how many Interface determinations,receiver determinations ,sender agreements,receiver agreements need to create for this.......
It will be good if anyone send the BPM design flow for this.........
can we do this scenario without BPM?
Regards
A.Muni kumar
Edited by: Muni 1234 on Jan 31, 2012 10:24 AM

Hi
Receiver is FTP only.....
SAP side is RFC.........
RFC sender will be initiating the scenario, and there is receiver is File, PI should go to file directory and take the file then send it back to RFC as response.
Sender: RFC
Receiver: File
1. is this scenario with condition based routing.. so that each time outof many receiver systems it will trigger any specific system.
if above is the case then you can achive this without BPM also..
Yes...its condition based routing...
I Used async in this scenario.....sender side configurations also done....
But when when I am triggering BAPI from SE37 I am getting an error
Exception SYSTEM_FAILURE
Message ID: 00 Message number: 341
Message:
Runtime error CALL_FUNCTION_NOT_FOUND has occurred
How to Solve this????
I checked the RFC destination which i created in TCP/IP..a nd i mentioned the same in se37 RFC target system..
Connection is Ok
Or we need to create proxy for MI and report for this?
Edited by: Muni 1234 on Feb 1, 2012 8:38 AM

How would I import multiple Roadrunner emails each with multiple folders and continue to use my Roadrunner email to send and receive?

How would I import multiple Roadrunner emails each with multiple folders into Apple Mail and continue to use my Roadrunner email to send and receive from within Mail?

Try this.. Click the first in the CC field hold Shift, Click the Second Third, Fouth, Fifth and so on... click right Mouse select add to Contacts.

Create multiple folders with one click on documents tab in BP in SAP CRM

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

Hi Experts,
I have a requirement to create multiple folders by clicking on a button in Documents tab in BP transaction in CRM. In standard process by clicking on create folder button we create folders. we want to create multiple folders with one single click ( i guess we can develop another button for that) folder name will be hard coded. Kindly let me know , how this can be achieved.

Receiver SAP SFTP adapter-errorlog on SFTP server

Experts,
I am using receiver SAP SFTP adapter to connect to an SFTP server and send files.Receiver SFTP server is a VMS system.I could able to write the files to home directory of the user that has been given,but apart from writing the files I am seeing warning log file in the the target folder on SFTP server like below description.I am giving dot(.) in the file path to write the files to the default directory that has been assigned to the user given by receiver SFTP server team.
WARNING: ssh_file_server_receive_proc: platform cannot stat() filename /home/dir1/dir2 ./TestFile(TestFile is my file name) .
Just to test,we placed files in the receiver SFTP server using same user and password as the PI recv SFTP channel with command line and winsCP client tool,but we don't see any error logs on the server with WinSCP tool or command line transfer of the files.Log file with above warning is generating only when we place files on the server using SAP SFTP adapter in the recv channel of PI.
Please let me know,if you have any insight or seen similar issue.
Thank you,
Sri

Hi Poonam - Blogs on SFTP : Just search for SFTP and filter by blogs/documents.. you can find many..
>>> http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/305eeb5b-81e7-2f10-d8aa-9216de04ca3e?QuickLink=index&overridelayout=true&57075820413417
http://scn.sap.com/docs/DOC-35572
I read in some of the SDN forum that SFTP adapter doesnt have the capability to read the files from multiple directories. So, if we get any requirement to read the files from multiple directories using sftP, why could be a possible solution for this requirement?
>>> Yes. It is only possible with NFS.
You have to define multiple channels/interfaces...

SAP SFTP Adapter

HI FRIENDS,
I need your help in two points -
1 -- Is there a document on sdn which covers the detailed information on SAP SFTP adapter? I found few links online but they are only covering few features. None of them talks about any limitation on the adapter.
2-- I read in some of the SDN forum that SFTP adapter doesnt have the capability to read the files from multiple directories. So, if we get any requirement to read the files from multiple directories using sftP, why could be a possible solution for this requirement?
Thanks for your time. PS.

Hi Poonam - Blogs on SFTP : Just search for SFTP and filter by blogs/documents.. you can find many..
>>> http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/305eeb5b-81e7-2f10-d8aa-9216de04ca3e?QuickLink=index&overridelayout=true&57075820413417
http://scn.sap.com/docs/DOC-35572
I read in some of the SDN forum that SFTP adapter doesnt have the capability to read the files from multiple directories. So, if we get any requirement to read the files from multiple directories using sftP, why could be a possible solution for this requirement?
>>> Yes. It is only possible with NFS.
You have to define multiple channels/interfaces...

File archiving into multiple folders

Hi,
I have the below scenario:
There are two folder paths that one XI sender channel is polling on. Multiple folders can be polled on using one channel with the help of "Advanced Selection of Source File" option in the Sender communication channel.
But, I need your help in archiving the files to multiple folders.
For example, I have two main folders A and B configured in the Sender communication channel.
If the file has come to the folder A, it has to be archived in the 'A/archive' folder. Similarly, if the file has come to the folder B, it has to be archived in the 'B/archive' folder.
Please note that archiving has to be done before message processing.
1. I tried writing a script but it didnot work. If you have a script that worked, please provide me with the same.
2. I cannot create two sender channels, since the sender agreement cannot be common for two channels for the same business system and message interface.
Please help me if you have any other better optimum solutions.
Regards,
Subbu

Hi Subbu,
contact UNIX team, they will help you, you can do this easily using UNIX script.
Regards,
Raj

Shortcut to close multiple folders in List View

In the Finder, in list view, I have multiple folders open (using the triangle by the Folder name). I'd like to be able to close all the open folders at once. I know that holding Option while clicking the red Close button on a window will close multiple windows and I want to do something similar with the folders.
I'm sure I knew how to do this once but can't remember now.
Thanks,
Steve

Command-click or otherwise select all of them, and then push the left arrow key.
(104961)

How can "multiple folders/files" be deleted in ONE PSEXEC COMMAND LINE

I can delete remote folders/files via bat command with psexec (below) but;
It takes a little time because of the 9 different folders. Maybe, looping of txt file can be used for different folders.
So how we can delete multiple folders in ONE PSEXEC COMMAND LINE?
Here my working code but it does its job in 9 steps :(
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\1*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\2*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\3*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\4*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\5*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\6*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\7*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\8*.*") do rd /s /q "%%a""
psexec \\%PC% cmd /c "for /d %%a in ("c:\Users\9*.*") do rd /s /q "%%a""
\_(ツ)_/ twitter.com/serdaruzun

I think it is:psexec \\%PC% cmd /c "for /l %%n in (1;1;9) do for /d %%a in ("c:\Users\%%n*.*") do rd /s /q "%%a""
\_(ツ)_/ twitter.com/serdaruzun

How can I add multiple folders to iTunes with Windows 8?

I have windows 8 and the latest version of iTunes on Windows 8. How can I put multiple folders of music onto iTunes

Enable the menu bar with Ctrl+B. Then use File > Add Folder to Library.
tt2

How do I move multiple folders to a new location

I'm tring to reorganize after a computer crash. How do I move multiple folders to a new location?

In the Organizer you can switch to Folder Location View by clicking the Display button (near top right)
You can then expand he folder tree in the left hand pane and drag and drop.

Multiple folders on a single MP3 cd

when I put a MP3 cd in my car stereo, it asks me which folder do you want to play? This leads me to believe that I can put multiple folders on one cd, and I was wondering the logistics of this. Can I simply burn one folder on the cd, pick another play list in itunes and click burn while leaving the same CD in my drive?

We don't support this yet but we are starting to look at what it would take to add this to the product.
You can vote on this feature request here: http://forums.adobe.com/ideas/1046
We use this to help prioritize our work.
Thanks,
Randy

Can I export multiple folders at the same time, keeping the album structure

I'm exporting all of my photos from 2010 so far. Is there a way to export multiple folders at the same time, while keeping the existing album structure? It seems that when I try it, iPhoto exports them all to the same folder.
I really don't want to do this one album at a time, and here's why -
I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.

Check out [iPhotoToDisk|http://www.iphototodisk.com/index.html]
I'd like to select all of the albums, then export, using the plugin, to WalMart so that I can order prints.
Why not upload to Walmart from iPhoto? Check out the first option here:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 and later*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and later* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
For users of 10.6 and later:
You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu. Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and later:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD

Is there any problem to use multiple threads to send email with JavaMail

Dear all,
I am using JavaMail 1.3.2 to send emails with SMTP, it works very well for a long time.
But one day, I found that the email service hanged and I could never send email again until I restart the tomcat. I found that the reason was a deadlock had been created, the required resource for sending email had not been released.
I guess the error is due to multiple threads are sending email at the same time. I made a test to create seperate thread for sending each email. After few days, I found this deadlock happened again. So, my question is: Can I use JavaMail with multiple threads? If not, I may need to sychronized all the thread that using JavaMail. I would like to make sure this is the reason for causing the deadlock problem.
Here is part of my code for using JavaMail:
transport = session.getTransport("smtp");
transport.connect(email_host, smtp_user, smtp_pass);
message.saveChanges();
transport.sendMessage(message,message.getAllRecipients());
which is very standard call, and it worked well for a long time.
Here is part for my thread dump on tomcat:
(Thread-339)
- waiting to lock <0x5447c180> (a sun.nio.cs.StandardCharsets)
(Thread-342)
- locked <0x5447c180> (a sun.nio.cs.StandardCharsets)
It seems that these happened after call the method transport.sendMessage() or message.updateChanges()
, and the underlying implementation may require the JRE StandardCharsets object. But the object had been locked and never be released. So, the sendMessage() or updateChanges() can't be completed.
Please give me some helps if you have any idea about it.
Thanks very much!
Sirius

Note that the Nightly build gets updated daily (and sometimes more than once in case of a respin) and it is always possible that something goes wrong and it doesn't work properly, so be prepared for issues if you decide to stay with the Nightly build and make sure to have the current release with its own profile installed as well in case of problems.
See also:
* http://kb.mozillazine.org/Testing_pre-release_versions
*http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
*http://kb.mozillazine.org/Shortcut_to_a_specific_profile
*http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

SAP SFTP- PIB2BSFTP - multiple folders in sender

Similar Messages

Maybe you are looking for