SAP Shipment Error

Dear All,
While creating shipment cost when I am tick the Transfer checkbox the PO no. is showing as $001.When I click on the Save button the following error message is displayed. "NO SERVICE ITEMS SELECTED".The account assignment is complete and is displayed correctly.What is the reason behind this error and how to resolve this?????
Q2.When a Service PO is created from Shipment cost the text reads "Automatic generation-freight service charges".
Can someone please tell me from where and how is this text derived???.
Someone plzz help.
Regards

can someone plzzzz help me resolve this teething problem which I am facing.
The T-Event key is VBR and the G/l assignment has been done for VBR/9401/417300 in GBB and VBR/152000 in WRX.
Cost Centers have been assigned and so is the business area.The screen for VI01 opens with an error log-Enter Cost Center even though the Cost Center has been derived.Sthg which i see in Account determination.
I have checked ME2L-there is no po generated even thought the system generates the message "PO Number XXXX has been saved.".
In item category the PO generation option is C.
Where can the problem be???????
Plleeeease help.
Regards.

Similar Messages

Sap Payroll error log report

Hi All,
We are developing Report on SAP Payroll log with the error message . Is any table exist in SAP where we can get the standard error message repositery and then convert it in the User freindly error message ?
Thanks
H

Hello hg,
Before developing report on SAP Payroll error log I suggest taking a look at below blog. There is a new functionality from SAP to improve payroll data validation and they are calling it "Control Center Add-On".
This is going to be a free add on for anyone who is on EHP7 and NetWeaver on 7.4 release. The general availability is June 2nd 2014.
Improve payroll data validation with SAP Payroll control center add-on
Hope this helps.
Thanks,
Hemanth Jamithi.

How to catch SAP application errors in BPM.

Hi,
I have a IDOC to Soap Sync Scenario where I send the message to a Webservice. I have used a BPM since we need to catch the resposne of this message and map it to a RFC. For ex if I get a success resposne I need to map success if not than I need to catch the error and map it to the RFC. Now here in some cases like if the target system (webservice) is down than XI raises a sap application error:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Connection refused (errno:239)</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Normally XI stops the process in these cases and does not proceed to the next step but I need to catch this message and map the content in the AdditionalText to the target RFC. Can anyone let me know how to catch this SAP Application Error in BPM and map it to the RFC.
Thanks,
Bhargav

Hi Gaurav,
As I have mentioned I need to catch the application error in the BPM. If you see the discussion that is mentioned after the blog you have mentioned it is stated that the fault messages or the application error cannot be caught in BPM.
In the blog that you stated we can catch the fault message and map it to a message structure but only to that extent after that it would stop the BPM process at that step but would not proceed further as shown in the screenshot given in the blog it would fail as "application error restart not possible".
I need to proceed further and capture this error to an RFC Structure and call a proxy.
Here after the error it does not proceed to the next step.
Thanks,
Bhargav

Error while printing (SAP spool error)

Hi,
I have configured a printer of type 'C : Direct Operating System Call'. On printing a page, an error occurs with the following log entries
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 1775: "A null context handle was passed from the client to the host during a remote procedure call."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
Please. can someone help me out here.
Thanks!
Regards,
Angad

Ok I am upgrading from R/3 46C to ECC 6.0, on the 46c system the printers are configured as follow:
Device type          HPLJ4    : HP Laserjet 4 series
Spool server          sapprod1_PRD_00       sapprod1
Device class          Standard printer
Host spool access method C: Direct operating system call
Host printer
srtroot03.startek.com\srt-dc-c4-sharp
Host name          sapprod1
On the ECC 6.0 system the printers are configured as follows:
Device Type          HPLJ4    : HP Laserjet 4 series
Spool Server          srtsapeccdev1_DEV_00
Server Description
Host               srtsapeccdev1
Device Class          Standard printer
Host Spool Access Method C: Direct operating system call
Host printer
srtroot03.startek.co\srt-dc-c4-sharp
HostName          srtsapeccdev1
The 46c system prints just fine, on the ECC 6.0 systems; I can not get the printers to work. I have made sure that the hosts file on the ECC server has the printer host address, and I get the following error back:
SAP spool error log
=====================
Print request processing log
The host spool is reporting errors
Windows/NT error 5 [
srtroot03.startek.com\srt-dc-c4-sharp]: "Access is denied."
Errors occurred processing this print request
Error during print request output. l_rc = 1
There may be no printout
The access to the Printer Host is wide open, what do I need to do to resolve this issue.

Sap-plugin error when deploying a par file

Hi,
We are getting sap-plugin error when ever we are trying to deploy the application to the portal.Even after restarting the server the problem is not getting solved.
The application we are trying to deploy is perfectly alright as we tested the same earlier.
Can any one provide some inputs to solve this issue.
To add some more points
In brief ,we are not able to deploy our Portal applications . It is giving us error like this
NFO: Detected Portal Archive File: com.abc.par
INFO: Deployment failed - exception caught: Application upload failed: com.abc.par - more detail at: /usr/sap/POD/JC30/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcd/com.abc.par.log
We got this error many times , but after some time , when we restart the portal it works,
this time it is not working even after I restarted the server many times

hi all, i have same problem with upload of .par file, it doesn't work both from the portal and from the NWDS,
here i post first part of log file:
this is   sap-plugin.log :
[16.05.07 / 13:05] #ERROR LEVEL# com.sap.portal.developmentTools.ideSpecific.eclipse.wizards.sapmakepar.SAPMPWizard$1 > Upload Response: <?xml version="1.0" encoding="utf-8"?>
<query-result><info><type>1</type><message>Detected Portal Archive File: test.par</message></info><info><type>1</type><message>Deployment failed - exception caught: Application upload failed: test.par - more detail at: C:\usr\sap\SWB\DVEBMGS02\j2ee\cluster\server0\apps\sap.com\irj\servlet_jsp\irj\root\WEB-INF\deployment\pcd\test.par.log</message></info></query-result>
this is test.par.log :
2007-05-16_12-03-10
Application upload failed: test.par
com.sapportals.portal.prt.runtime.PortalException: [ApplicationRepositoryService.putArchive] archive: test.par
     at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.putArchive(ApplicationRepositoryService.java:328)
     at com.sapportals.portal.prt.deployment.DeploymentManager._uploadArchive(DeploymentManager.java:813)
     at com.sapportals.portal.prt.deployment.DeploymentManager.uploadArchive(DeploymentManager.java:474)
     at com.sapportals.portal.prt.deployment.DeploymentManager.uploadApplication(DeploymentManager.java:319)
     at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doUpload(ArchiveUploader.java:116)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleRequestEvent(AbstractPortalComponent.java:700)
     at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:412)
     at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
     at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
     at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:707)
     at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
     at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.pcd.pl.PlRuntimeException: unexpected SQLException
Cannot assign a zero-length byte array to host variable 18.
     at com.sapportals.portal.pcd.pl.PlFactory.handleUnexpectedSQLError(PlFactory.java:2490)
     at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:652)
     at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1360)
     at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1118)
     at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1076)
     at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:846)
     at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:185)
     at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:188)
     at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:244)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:133)
     at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:500)
     at com.sapportals.portal.pcd.gl.PcdGlContext.bind(PcdGlContext.java:425)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.bind(PcdProxyContext.java:426)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.rebindInt(PcdProxyContext.java:446)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:460)
     at com.sapportals.portal.pcd.gl.PcdGlContext.rebind(PcdGlContext.java:1317)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:501)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:663)
     at com.sapportals.portal.pcd.gl.PcdProxyContext.rebind(PcdProxyContext.java:668)
     at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.updateObject(ApplicationRepositoryService.java:717)
     at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.storeApplication(ApplicationRepositoryService.java:389)
     at com.sapportals.portal.application.applicationrepository.ApplicationRepositoryService.putArchive(ApplicationRepositoryService.java:306)
     ... 34 more
Caused by: com.sap.sql.log.OpenSQLException: Cannot assign a zero-length byte array to host variable 18.
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:85)
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:124)
     at com.sap.sql.jdbc.common.dispatch.BlobHostVariable.setBinaryStream(BlobHostVariable.java:143)
     at com.sap.sql.jdbc.common.CommonPreparedStatement.setBinaryStream(CommonPreparedStatement.java:776)
     at com.sap.engine.services.dbpool.wrappers.PreparedStatementWrapper.setBinaryStream(PreparedStatementWrapper.java:401)
     at com.sapportals.portal.pcd.pl.AttributeHeadersTable.storeAttribute(AttributeHeadersTable.java:431)
     at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:248)
     at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:541)
     at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:616)
     at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:640)
     ... 54 more

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)

SAP query error - 1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Conversion failed when converting date and/or time from character string. 'Received Alerts' (OAIB)
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM         ODPO AS T0 LEFT OUTER JOIN
                      VPM2 AS T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry LEFT OUTER JOIN
     OVPM AS T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                      VPM1 AS T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate>='[%0]' and T0.DocDate<='[%1]'

Hi,
Try this:
SELECT
CASE WHEN T0.DocStatus = 'O' THEN 'OPEN'
WHEN T0.DocStatus = 'C' THEN 'CLOSED' END AS 'Document Status',
T0.DocDate AS 'Posting Date',
T0.DocNum AS 'Doc.No',
T0.NumAtCard,
T0.TransId AS 'Trans. No.',
T0.Comments AS 'Remarks',
T0.CardCode AS 'Offset Acct',
T0.CardName AS 'Offset Acct Name',
sum(T0.DocTotal) + (T0.WTSum) as 'DocTotal',
T3.DueDate AS 'Cheque Date',
T3.CheckSum AS 'Amount'
FROM         ODPO T0 LEFT OUTER JOIN
                      VPM2 T1 ON T0.ObjType = T1.InvType AND T0.DocEntry = T1.DocEntry
LEFT OUTER JOIN
     OVPM T2 ON T2.DocEntry = T1.DocNum LEFT OUTER JOIN
                      VPM1 T3 ON T2.DocEntry = T3.DocNum
where T0.DocDate >= '[%0]' and T0.DocDate <='[%1]'
group by T0.DocStatus,T0.DocDate ,
T0.DocNum ,
T0.NumAtCard,
T0.TransId ,
T0.Comments ,
T0.CardCode,
T0.CardName ,
T0.WTSum ,
T3.DueDate ,
T3.CheckSum
Thanks & Regards,
Nagarajan

SAP XI error: 401 Unauthorized (When calling from Enterprise Portal)

Hello Friends
I am trying to access an SAP table from IVIEW of portal via XI. Using the latest and greatest version of all SAP Components. (We just installed couple of weeks back).
I keep getting the following error message when I try to access data from IVIEW of portal.
"SAP XI error: 401 Unauthorized"
What may be the reason? If some one can help me, I would really appreciate it.
Thanks
Ram

Thanks Srinivas for your help.
I tried accessing the URL directly and got the error message
"User Credentials not passed via Enterprise Portal. Please contact your Administrator"
Any more suggestions?
Thanks again
Ram

How to set external number for SAP shipment ?

How to manually assign external number in alphanumeric like AB07089999 for SAP shipment (via VT01N) ?
Edited by: MicMic on Sep 19, 2011 6:13 AM

Hi,
As i know there is no possibility if alphanumeric number range in sap.You check with any exit before updating the no in database.check this and post .
Regards,
Madhu.

SAP Shipment Pricing Error

Dear All,
I have created a condition type ZF20 which has been copied from FB20.This has been defined as a Header condition .
When I am creating Shipment Cost the condition type ZF20 is displayed twice at the item level.
There is a red light in front of ZF20 in the first line , on doubleclikcing it is displaying Incorrect ...formulae.
How to ensure that ZF20 is entered at the Header level and the price entered eg 20000 is split into 10000 and 10000 across two shipment items and that also once for each shipment item.
Regards

Hi
Try to change the value of calculat.type in the defition of the condition (for instance, with A instead of B).
I hope this helps you
Regards
Eduardo

ERP shipment request "Create/Update ERP shipment - error

Hi
We are implementing TM 9.0 for freight tendering scenario and using ERP EHP7 and SAP PI. While creating shipment request Create /Update ERP - we are experiencing Skipped as error and data is not flowing from TM to ERP to update the shipment details.
There is no log created in TM for this error nor there is error in PI.
I have attached screen shots of the error we are experiencing.
Request to help me here.
Thx KP

Hi Ali,
Is Create ERP Shipment the only line greyed out or are more of them inaccessible?
It looks like you are viewing the individual Freight Order if you see the Follow Up button. Have you tried it from the Overview screen of Freight Management (highlight the line with your FOR and the Create ERP Shipment should be visible)?
Regards,
Mike

SAP ECC error:'Migration Monitor' exits with error code 103.

Hi All,
I am doing SAP ECC installation for windows 32 bit with MAXDB as backend.
I am stuck at the import ABAP.Getting error
ERROR 2008-08-08 16:10:53
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
1) imort_monitor.java.log-->contains
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 0, completed 18, failed 0, total 19.
Loading of 'SAPVIEW' import package: ERROR
Import Monitor jobs: running 0, waiting 0, completed 18, failed 1, total 19.
2)import_monitor.log
ERROR: 2008-08-08 16:10:36 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -nolog -c 0' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-08-08 16:10:52
All import packages are processed.
WARNING: 2008-08-08 16:10:52
1 error(s) during processing of packages.
INFO: 2008-08-08 16:10:52
Import Monitor is stopped.
3)SAPVIEW.log
error message returned by DbSl:
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "Z_T_CO_BW" ( "KOKRS" , "KOSTL" , "VERSN" , "KSTAR" , "WOG001" , "MEG001" ) AS SELECT T0002."KOKRS", T0002."KOSTL", T0001."VERSN", T0001."KSTAR", T0001."WOG001", T0001."MEG001" FROM "COSS" T0001, "CSKS" T0002 WHERE T0002."MANDT" = T0001."MANDT")
DbSlExecute: rc = 103
(SQL error -942)
error message returned by DbSl:
(DB) INFO: disconnected from DB
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: job finished with 3108 error(s)
D:\usr\sap\EC6\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080808174211
Only SAPDB: SAPSID srvice of SAP DB is only up.
No other services of database are up.And i am not able to up the other services also.
Is it required to up the other services?
If not?
Why this error is occuring?
Any help will be appreciated.
Thanks&Regards
Manisha das

Hello Manisha,
The one of the possible reasons for this is due to lack of H/W.
Increase your RAM size to atleast 2GB and utilise the same while you are installing ECC in database parameters step..
If the issue is with H/W, then this should fix the issue.
Hope it helps,
Regards,
Satish.

SAP HANA: Error while activating Graphical Calculation Views

Hello,
I am receiving the below error while activating a Graphical Calculation View.
I am getting this error lately. Not sure what is causing this because the calculation views worked just fine before.
It is failing at the Repository Activation step with the Activation ID 2146.
It says - Repository: Revalidation failed for at least one object.
MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="sflight/GC_AGENCY_REVENUE" schema="_SYS_BIC"><dataSources><tableDataSource name="SBOOK" schema="SFLIGHT" table="SBOOK"><attributes><allAttribute /></attributes></tableDataSource><tableDataSource name="STRAVELAG" schema="SFLIGHT" table="STRAVELAG"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><join name="Join_1" type="inner"><viewAttributes><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="MANDT" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="AGENCYNUM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="FORCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="LOCCURAM" /><viewAttribute ignoreFromInputsFlag="false" isVisible="true" name="NAME" /></viewAttributes><inputs><input name="SBOOK"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="FORCURAM" target="FORCURAM"/><mapping source="LOCCURAM" target="LOCCURAM"/></input><input name="STRAVELAG"><mapping source="MANDT" target="MANDT"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="NAME" target="NAME"/></input></inputs><joinAttributes><joinAttribute excludeFlag="false" name="MANDT" /><joinAttribute excludeFlag="false" name="AGENCYNUM" /></joinAttributes></join><aggregation name="finalAggregation" defaultViewFlag="true"><inputs><input name="Join_1"><mapping source="NAME" target="NAME"/><mapping source="AGENCYNUM" target="AGENCYNUM"/><mapping source="MANDT" target="MANDT"/><mapping source="LOCCURAM" target="LOCCURAM"/><mapping source="FORCURAM" target="FORCURAM"/></input></inputs><viewAttributes><viewAttribute name="NAME"/><viewAttribute name="AGENCYNUM"/><viewAttribute name="MANDT"/></viewAttributes><keyfigures><keyfigure name="LOCCURAM" aggregationType="sum"/><keyfigure name="FORCURAM" aggregationType="sum"/><keyfigure name="row.count" datatype="int" isVisible="false" aggregationType="count"/></keyfigures><calculationNodeHints countStarAttribute="row.count"/></aggregation></calculationViews></calculationScenario></cubeSchema>nVersion: 33n
I am using the SFLIGHT schema which is provided by SAP.
Any pointer is appreciated.

Hi Murali
I met the exactly same issue when I try to activate a graphical calculation views.
I created a new user in HANA db, then create a simple graphical calculation view(just from one table from this user). It doesn't work. All attribute views work fine. There's no related column view under _sys_bic.
HANA database version is 1.00.31 runs on HP DL580 512GB. And here's the error message -
"MDXRuntime: Internal deployment of object failed: Internal Error:Create Scenario: failed aCalcEngine.createScenario(): The following errors occured: Could not create repository entry for scenario (34053)nnprinting XML <?xml version="1.0" encoding="UTF-8" standalone="no"?><cubeSchema defaultLanguage="EN" defaultSchema="_SYS_BIC" operation="createCalculationScenario" version="3"><calculationScenario name="co-pc-river/CALC_TEST1" schema="_SYS_BIC"><dataSources><tableDataSource name="JEST" schema="GLR" table="JEST"><attributes><allAttribute /></attributes></tableDataSource></dataSources><calculationViews><projection name="finalProjection" defaultViewFlag="true"><inputs><input name="JEST"><mapping source="MANDT" target="MANDT"/><mapping source="OBJNR" target="OBJNR"/><mapping source="STAT" target="STAT"/><mapping source="INACT" target="INACT"/></input></inputs><viewAttributes><viewAttribute name="MANDT"/><viewAttribute name="OBJNR"/><viewAttribute name="STAT"/><viewAttribute name="INACT"/></viewAttributes></projection></calculationViews></calculationScenario></cubeSchema>nVersion: 64n"
Best Regards
Mao Mingqi

SAP router error on windows server 2008 64bit

Hi All,
I am installing sap router on windows 2008 server 64 bit.
While trying to generate certificate request it showing below error.
E:\usr\sap\saprouter\nt-x86_64>sapgenpse get_pse -v -r certreq -p local.pse "CN=
solman, OU=000XXXXXXX, OU=SAProuter, O=SAP, C=DE"
Got absolute PSE path "C:\Users\soladm\sec\local.pse".
Please enter PIN:
Please reenter PIN:
Supplied distinguished name: "CN=solman, OU=000XXXXXXX, OU=SAProuter, O=SAP, C=
DE"
Creating PSE with format v2 (default)
get_pse: Can't create PSE.
ERROR in af_create: (4352/0x1100) could not flush : "SW-PSE"
ERROR in create_PSE: (4352/0x1100) could not flush : "SW-PSE"
ERROR in modified_PSEFile: (4352/0x1100) could not flush : "SW-PSE"
ERROR in flush_PSEFile: (1283/0x0503) Can't write file : "C:\Users\soladm\sec\lo
cal.pse"
ERROR in aux_OctetString2file: (1283/0x0503) Can't write file : "C:\Users\soladm
\sec\local.pse"
I couldn't find the cryptography software specifically for windows 2008 server 64 bit ? So I downloaded the software for windows server 64 bit platform.
Do any one have idea on this...
Please reply..
Regards
Vinay

Hi,
Yes, there is no specific cryptography software for windows server 2008 and whatever u have chosen is correct.
Fom the following error message I could see where the issue arises.
Can't write file : "C:\Users\soladm\sec\local.pse"
I think you have not set the following ENV variable for the SAPRouter admin user (in your case soladm) and hence the sapgenpse tries to import the certificate in the SOLADM user's document folder.
Set the following variables for the user SOLADM and then try to import the certificate as mentioned in the [link|http://service.sap.com/saprouter-sncdoc].
SECUDIR = E:\usr\sap\saprouter
SNC_LIB = E:\usr\sap\saprouter\nt-x86_64\sapcrypto.dll
Hope this resolves ur issue.
Regards,
Varadharajan M

SAP GRC10 - Error while submitting Access Request

Hello All,
<<Removed>>
While submitting the request ...getting below mentioned error on the page
Error while processing your query
What has happened?
The URL call http://<<removed>>/sap/bc/webdynpro/SAP/GRAC_GAF_ACC_REQ_WITH_REQ_REF was terminated because of an error.
Note
The following error text was processed in system GD1 : Conversion of type h to type N not supported.
The error occurred on the application server blrkec220748d_GD1_00 and in the work process 1 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_DUE_DATE of program CL_GRAC_ACCESS_REQUEST_UTIL===CP
Method: GET_DUE_DATE of program CL_GRAC_MODEL_ACCESS_REQUEST==CP
Method: IF_GRFN_API_MODEL~SAVE of program CL_GRAC_MODEL_ACCESS_REQUEST==CP
Method: SAVE of program CL_GRFN_API_SESSION===========CP
Method: CREATE of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: IF_COMPONENTCONTROLLER~CREATE of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: PROCESS_EVENT of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: IWCI_IF_FPM_UI_BUILDING_BLOCK~PROCESS_EVENT of program /1BCWDY/Z3TZZFT9CG8486P2AANU==CP
Method: CALL_UIBB_PROCESS_EVENT of program CL_FPM========================CP
Method: PROCESS_EVENT of program CL_FPM========================CP
What can I do?
If the termination type is RABAX_STATE, you will find more information on the cause of termination in system GD1 in transaction ST22.
If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server blrkec220748d_GD1_00 in transaction SM21.
If the termination type is ERROR_MESSAGE_STATE, you cansearch for further information in the trace file for the work process 1 in transaction ST11 on the application server. <<Removed>>
. You may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system adminmistrator.
Error Code: ICF-IE-http -c: 400 -u: 163554 -l: E -s: GD1 -i: blrkec220748d_GD1_00 -w: 1 -d: 20111005 -t: 195025 -v: RABAX_STATE -e: OBJECTS_MOVE_NOT_SUPPORTED -X: 1078D28404571EE0BBEBA3BBD9492C36_1078D28404571EE0BBEBA40E1A426C36_1 -x: 1D5DEFE0CADEF14FAC361078D2840457
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
============================================================
Please find below error Log from SLG1
Config Error,Function Module is not maintained for Plug-in
Thanks,
Jagat
Edited by: Matt on Jan 25, 2012 3:24 PM

Hello Aman,
Please find Below Dump Details downloaded from ST22
Category               ABAP Programming Error
Runtime Errors         OBJECTS_MOVE_NOT_SUPPORTED
ABAP Program           CL_GRAC_ACCESS_REQUEST_UTIL===CP
Application Component GRC-AC
Date and Time          07.10.2011 10:47:56
     Short text
          Conversion of type "h" to type "N" not supported.
     What happened?
          Error in the ABAP Application Program
          The current ABAP program "CL_GRAC_ACCESS_REQUEST_UTIL===CP" had to be
           terminated because it has
          come across a statement that unfortunately cannot be executed.
     Error analysis
          You attempted to move one data object to another.
          This is not possible here because the conversion of a data object
          of type "h" to type "N" is not supported.
     Trigger Location of Runtime Error
         Program     CL_GRAC_ACCESS_REQUEST_UTIL===CP
         Include     CL_GRAC_ACCESS_REQUEST_UTIL===CM018
         Row     59
         Module type     (METHOD)
         Module Name     GET_DUE_DATE
     Source Code Extract
     Line     SourceCde
        29
        30     *-get function id from application & process id
        31         CALL METHOD cl_grac_access_request_util=>get_appl_mapping_data
        32           EXPORTING
        33             iv_application_id   = lv_application_id
        34             iv_process_type     = iv_process_id
        35           IMPORTING
        36             et_application_data = lt_application_data.
        37
        38     *only 1 record would exist in appl data table for appl id & process id
        39         READ TABLE lt_application_data INTO ls_application_data
        40                                        INDEX 1.
        41         lv_fdt_uuid = ls_application_data-functionid.
        42     *--
        43       IF it_brftab   IS NOT INITIAL
        44       AND lv_fdt_uuid IS NOT INITIAL.
        45
        46     *-execute brf+ rule
        47         TRY.
        48             CALL METHOD cl_grfn_ac_brfp=>execute_brf_rule
        49               EXPORTING
        50                 iv_func_uuid = lv_fdt_uuid
        51                 it_data      = it_brftab
        52               IMPORTING
        53                 et_data      = lr_result.
        54           CATCH cx_grfn_exception .
        55         ENDTRY.
        56
        57         IF lr_result IS BOUND.
        58           ASSIGN lr_result->* TO <lr_result>.
     >>>>>           lv_sla_id = <lr_result>.
        60         ENDIF.
        61
        62         READ TABLE lt_sla INTO ls_sla
        63                           WITH KEY sla_id = lv_sla_id.
        64         IF sy-subrc EQ 0.
        65           ev_sla_id   = ls_sla-sla_id. "sla id
        66
        67     *calculate due date
        68           CALL FUNCTION 'END_TIME_DETERMINE'
        69             EXPORTING
        70               duration                   = ls_sla-sla_days
        71               unit                       = '10'
        72             IMPORTING
        73               end_date                   = ev_due_date " due date
        74             CHANGING
        75               start_date                 = sy-datum
        76               start_time                 = sy-uzeit
        77             EXCEPTIONS
        78               factory_calendar_not_found = 1
     Active Calls/Events
     No.   Ty.          Program                             Include                             Line
           Name
        26 METHOD       CL_GRAC_ACCESS_REQUEST_UTIL===CP    CL_GRAC_ACCESS_REQUEST_UTIL===CM018    59
           CL_GRAC_ACCESS_REQUEST_UTIL=>GET_DUE_DATE
        25 METHOD       CL_GRAC_MODEL_ACCESS_REQUEST==CP    CL_GRAC_MODEL_ACCESS_REQUEST==CM00Y    47
           CL_GRAC_MODEL_ACCESS_REQUEST=>GET_DUE_DATE
        24 METHOD       CL_GRAC_MODEL_ACCESS_REQUEST==CP    CL_GRAC_MODEL_ACCESS_REQUEST==CM004   420
           CL_GRAC_MODEL_ACCESS_REQUEST=>IF_GRFN_API_MODEL~SAVE
        23 METHOD       CL_GRFN_API_SESSION===========CP    CL_GRFN_API_SESSION===========CM004    11
           CL_GRFN_API_SESSION=>SAVE
        22 METHOD       /1BCWDY/Z3TZZFT9CG8486P2AANU==CP    /1BCWDY/B_Z3TZZFT9CG8486P2AAU5       3404
           CL_COMPONENTCONTROLLER_CTR=>CREATE
           Web Dynpro Component          GRAC_UIBB_ACCESS_REQUEST
           Controller                    COMPONENTCONTROLa
        21 METHOD       /1BCWDY/Z3TZZFT9CG8486P2AANU==CP    /1BCWDY/B_Z3TZZFT9CG8486P2AAU5        159
           CLF_COMPONENTCONTROLLER_CTR=>IF_COMPONENTCONTROLLER~CREATE
           Web Dynpro Component          GRAC_UIBB_ACCESS_REQUEST
           Controller                    COMPONENTCONTROLLER
        20 METHOD       /1BCWDY/Z3TZZFT9CG8486P2AANU==CP    /1BCWDY/B_Z3TZZFT9CG8486P2AAU5       7374
           CL_COMPONENTCONTROLLER_CTR=>PROCESS_EVENT
           Web Dynpro Component          GRAC_UIBB_ACCESS_REQUEST
           Controller                    COMPONENTCONTROLLER
        19 METHOD       /1BCWDY/Z3TZZFT9CG8486P2AANU==CP    /1BCWDY/B_Z3TZZFT9CG8486P2AAU5        534
           CLF_COMPONENTCONTROLLER_CTR=>IWCI_IF_FPM_UI_BUILDING_BLOCK~PROCESS_EVENT
           Web Dynpro Component          GRAC_UIBB_ACCESS_REQUEST
           Controller                    COMPONENTCONTROLLER
        18 METHOD       CL_FPM========================CP    CL_FPM========================CM00G    46
           CL_FPM=>CALL_UIBB_PROCESS_EVENT
        17 METHOD       CL_FPM========================CP    CL_FPM========================CM005    46
           CL_FPM=>PROCESS_EVENT
        16 METHOD       CL_FPM========================CP    CL_FPM========================CM00C    34
           CL_FPM=>RUN_EVENT_LOOP
        15 METHOD       CL_FPM========================CP    CL_FPM========================CM00O     8
           CL_FPM=>RAISE_EVENTS
        14 METHOD       /1BCWDY/Z3TZZFT9CG847SKLEJYU==CP    /1BCWDY/B_Z3TZZFT9CG847SKLEK56       2997
           CL_CNR_VIEW_CTR=>ONACTIONBUTTON_PRESSED
           Web Dynpro Component          FPM_GAF_COMPONENT
           Controller                    CNR_VIEW
        13 METHOD       /1BCWDY/Z3TZZFT9CG847SKLEJYU==CP    /1BCWDY/B_Z3TZZFT9CG847SKLEK56        382
           CLF_CNR_VIEW_CTR=>IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER
           Web Dynpro Component          FPM_GAF_COMPONENT
           Controller                    CNR_VIEW
        12 METHOD       CL_WDR_DELEGATING_VIEW========CP    CL_WDR_DELEGATING_VIEW========CM006     6
           CL_WDR_DELEGATING_VIEW=>INVOKE_EVENTHANDLER
        11 METHOD       CL_WDR_ACTION=================CP    CL_WDR_ACTION=================CM00A    38
           CL_WDR_ACTION=>IF_WDR_ACTION~FIRE
        10 METHOD       CL_WDR_WINDOW_PHASE_MODEL=====CP    CL_WDR_WINDOW_PHASE_MODEL=====CM00U    95
           CL_WDR_WINDOW_PHASE_MODEL=>DO_HANDLE_ACTION_EVENTS
         9 METHOD       CL_WDR_WINDOW_PHASE_MODEL=====CP    CL_WDR_WINDOW_PHASE_MODEL=====CM002    82
           CL_WDR_WINDOW_PHASE_MODEL=>PROCESS_REQUEST
         8 METHOD       CL_WDR_WINDOW=================CP    CL_WDR_WINDOW=================CM00V    12
           CL_WDR_WINDOW=>PROCESS_REQUEST
         7 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00I    76
           CL_WDR_MAIN_TASK=>EXECUTE
         6 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00U     6
           CL_WDR_MAIN_TASK=>IF_WDR_RUNTIME~EXECUTE
         5 METHOD       CL_WDR_CLIENT_ABSTRACT_HTTP===CP    CL_WDR_CLIENT_ABSTRACT_HTTP===CM01C   100
           CL_WDR_CLIENT_ABSTRACT_HTTP=>HANDLE_REQUEST
         4 METHOD       CL_WDR_MAIN_TASK==============CP    CL_WDR_MAIN_TASK==============CM00J    95
           CL_WDR_MAIN_TASK=>IF_HTTP_EXTENSION~HANDLE_REQUEST
         3 METHOD       CL_HTTP_SERVER================CP    CL_HTTP_SERVER================CM01B   388
           CL_HTTP_SERVER=>EXECUTE_REQUEST_FROM_MEMORY
         2 FUNCTION     SAPLHTTP_RUNTIME                    LHTTP_RUNTIMEU02                     1155
           HTTP_DISPATCH_REQUEST
         1 MODULE (PBO) SAPMHTTP                            SAPMHTTP                               13
           %_HTTP_START
Thanks,
Jagat

OpenPS MS project file- SAP PS - error while uploading

Hello guys,
I can't move the project (any project) data from MS Project to SAP PS. Why is that ? Is there any restriction for data to be changed in MS Project ? I modified only description of one WBS element.
I feel like I have to program additionally something somewhere..
here please check the action log:
Action Log for Open PS for MSP -2008.12.22, 09:57:11
- importing WBS elements from R/3 PS of project TESTAS-2008-12-22
The WBS.Getinfo BAPI was called.
- duration in sec.:0,4101563
- return code:
The project has following objects:
- WBS TESTAS-2008-12-221
- WBS TESTAS-2008-12-2211
   - Network 000004000100 - Activity 0010
   - Network 000004000100 - Activity 0020
- WBS TESTAS-2008-12-22111
- WBS TESTAS-2008-12-221111
- WBS TESTAS-2008-12-2211111
The Network.Getinfo BAPI was called.
- duration in sec.:4,296875E-02
- return code:
Deleting the unreferenced activities.
PS project data imported - end of BAPI call.
- creating R/3 PS project from current MSP project - TESTAS-2008-12-22
- clearing parameters ...
Parameters for import into PS cleared
Creating project definition...
- WBS element: TESTAS-2008-12-2211      - network: 000004000100
Creating PS hierarchy from MSP hierarchy
- create WBS element: TESTAS-2008-12-221
Creating relationships...
- create WBS element: TESTAS-2008-12-2211
Creating relationships...
- creating activity: 000004000100 0010
0 -- DAY
0 -- H
Creating relationships...
- creating activity: 000004000100 0020
0 -- DAY
0 -- H
Creating relationships...
- create WBS element: TESTAS-2008-12-22111
Creating relationships...
- create WBS element: TESTAS-2008-12-221111
Creating relationships...
- create WBS element: TESTAS-2008-12-2211111
Creating relationships...
PS import parameters created
- BAPI input parameter created succesfully
Projects are being compared...
- comparing project definitions
- Update project definition.TESTAS-2008-
- comparing WBS elements
   - update WBS element: TESTAS-2008-12-221
   - update WBS element: TESTAS-2008-12-2211
   - update WBS element: TESTAS-2008-12-22111
   - update WBS element: TESTAS-2008-12-221111
   - update WBS element: TESTAS-2008-12-2211111
- comparing WBS hierarchy
- comparing networks
   - update network: 000004000100
- comparing activities
   - update activity: 000004000100 0010
   - update activity: 000004000100 0020
- comparing relationships
- comparing activity elements
- comparing WBS milestones
- comparing activity milestones
IMethodProject:
- 000001 Update ProjectDefinition TESTAS-2008-
- 000001 Update WBS-Element TESTAS-2008-12-221
- 000002 Update WBS-Element TESTAS-2008-12-2211
- 000003 Update WBS-Element TESTAS-2008-12-22111
- 000004 Update WBS-Element TESTAS-2008-12-221111
- 000005 Update WBS-Element TESTAS-2008-12-2211111
- 000001 Update Network 000004000100
- 000001 Update NetworkActivity 000004000100 0010
- 000002 Update NetworkActivity 000004000100 0020
The WBS.Maintain BAPI was called.
- duration in sec.:5,859375E-02
- return code: E
- A B1547
     No currency key found for ISO code 0 in field BAPI_NETWORK_ACTIVITY-USER
- A B1547
     FIELDCUKY1_ISO
ERROR test import into PS system failed
ERROR updating PS project
Edited by: Laimonas Bindokaitis on Dec 22, 2008 10:07 AM

Please go though this doucument made by PS expert Srinivas sir,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5037d0e8-8bc2-2a10-6fb3-c4833289bb66
It will help you.
Regards
Nitin

SAP Shipment Error

Similar Messages

Maybe you are looking for