Sap sid _00 service is stopped while the production server is started.

while i try to start the sap production server, sapprd_00 service is stopped.
when i try to start the service manually. it gives a message saying,
"the service sapprd_00 started and stopped since it has no work to do"
can any body help me with this issue
Ravi
Yadutech
Basis Consultant

Hi Yadutech,
First start sapprd_00 manually with automatic properties.
then try to your sap production server.
Hopt it helps
Regards,
Arun

Similar Messages

SSO issue in the production server,com.sap.mw.jco.JCO$Exception: (103)

com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: This system rejects all logons using SSO tickets
in the production server.....
while testing the jco maintained for Ess applications.
if i go for uidpw method for modeldata destination i am getting the error. in the Ess pages that administrtor not in this peroid(administrator with which id i maintained jco destination)
if i assign one employee to the admin in pa30......for every employee getting the same details of admin)
I guess this problem with modeldata ......i should maintain the usermanagement method for modeldata jco destination is logon ticket.
while maintainig that ping is successfull but getting the above error.
it is the problem with production server.......of E.P
in dev and quality everything is working fine.
plz help me out.
thankyou
swapna

Hi Swapna,
Please check the logon group properties for SAP system in t-code SMLG. If there is any issue with logon group then it might cause for this issue.
Refer to [Click here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/7.0/portal%20integration/how%20to%20configure%20the%20jco%20destination%20settings.pdf] and [System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true]
Hope it will helps
Regards, Arun Jaiswal

Unable to start Lync 2013 FE service on one of the pooled server, error "The evaluation period for Microsoft Lync Server 2013 has expired"

Team,
Unable to start FE service on one of the FE server, 2 Enterprise lync 2013 pool one FE in each pool, only following error in event vrw,
Log Name: Lync Server
Source: LS Server
Date: 12/30/2013 12:10:55 PM
Event ID: 12290
Task Category: (1000)
Level: Error
Keywords: Classic
User: N/A
Computer: ACS465-BH102.me.ykgw.net
Description:
The evaluation period has expired.
The evaluation period for Microsoft Lync Server 2013 has expired. Please upgrade from the evaluation version to the fully licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Cause: The evaluation period for Microsoft Lync Server 2013 has expired.
Resolution:
Please upgrade from the evaluation version to the licensed version of the product. Look at help for Setup.exe to learn how to upgrade from evaluation version to the licensed version.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Server" />
<EventID Qualifiers="50152">12290</EventID>
<Level>2</Level>
<Task>1000</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:10:55.000000000Z" />
<EventRecordID>73953</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security />
</System>
<EventData>
</EventData>
</Event>
Log Name: System
Source: Schannel
Date: 12/30/2013 12:13:36 PM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T09:13:36.779033200Z" />
<EventRecordID>83985</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="3668" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Server is already on Full version, ran Reset-CsPoolRegistrarState
for fillrest as wel as serviceret
Followed below as well,
http://social.technet.microsoft.com/Forums/lync/en-US/2a7e27ce-2dea-4e37-91ea-1ed42e110198/issue-updating-from-eval-to-volume-licenses?forum=ocsplanningdeployment
Currently done failover to another pool and users can login,
however i cant get the front end service on this server.Any pointers would be appreciated.
Praveen | MCSE Messaging 2003

rit, the command is not doing the trick since its already full version,
PS C:\Users\lyncadmin> Get-CsServerVersion
Microsoft Lync Server 2013 (5.0.8308.0): Volume license key installed.
only one server in one pool, total two pools.
Lync 2013 is on Win 2008 R2, and the event in system im inclining to since i have tried all,
Log Name: System
Source: Schannel
Date: 12/30/2013 9:26:34 AM
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: ACS465-BH102.me.ykgw.net
Description:
The following fatal alert was generated: 10. The internal error state is 1203.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Schannel" Guid="{1F678132-5938-4686-9FDC-C8FF68F15C85}" />
<EventID>36888</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2013-12-30T06:26:34.877077500Z" />
<EventRecordID>64911</EventRecordID>
<Correlation />
<Execution ProcessID="556" ThreadID="620" />
<Channel>System</Channel>
<Computer>ACS465-BH102.me.ykgw.net</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="AlertDesc">10</Data>
<Data Name="ErrorState">1203</Data>
</EventData>
</Event>
Praveen | MCSE Messaging 2003

Stop: C0000135 The program can't start because %hs is missing from your computer

Im helping my aunt work on her computer. When you turn it on it says Stop: C0000135 The program can't start because %hs is missing from your computer on a blue screen. Its a Satallite C655-S5132. Please help. Thanks

If you are able to actually log into your Aunt's computer in SAFE MODE, your need to run from a command window the chkdsk /f press enter
It will prompt you to reboot and it will run chkdsk during reboot.
If it is unable to complete it is the hard drive.
If it does complete, then:
Run chkdsk /r from the command window press enter
It will prompt reboot and run during booting.
If it completes successfully great, if not then again it is a hard drive issue.
If you cannot log into your computer then follow these instructions:
Run check disk from Windows recovery environment. from recovery dvd
1. Access Windows Recovery command Run Check disk to fix any bad sectors on the hard drive.
2. At the command prompt type chkdsk /f and then press enter.
3. Now, type in chkdsk /r and then press enter.
I am also attaching a How-To-Document in Word 2003 for the above mentioned instructions.
I hope this helps.
"Knowledge should be unrestricted and the most important commodity we can offer to help one another."
Attachments:
Repairing Windows 7 through Recovery Dics.doc ‏31 KB

How do I view two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.

Basically I want to combine to clips with correct timings. For that I want to view the two clips overlapping each other, each being semitransparent to see both at the same time, so that I can decide where to stop of the first clip and start of the second clip? Thanks.

see my reply in your other post:
You're familiar with the TRIM-tool?
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632caff
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d8e4
http://help.apple.com/finalcutpro/mac/10.1/?lang=en#ver1632d9ae

How do you test any SAP objects before a transport to the production server

How do you test any SAP objects before a transport to the production server?

Hi Rama Krishna,
The actual process is develop the object in development system and unit test there with the available data.
Then move it to Quality server where the data will be the actual replica of production and where the integration testing and ened to end testing happens and also the user acceptance testing happens there.
and once everything is found fine there then it is moved to production system.
Award points if this is helpful.
Regards,
Ravi G

The J2EE Server not starting.

Hello,
The J2EE Server not starting. (Not able to communicate with message server)
The following is the description I got from SAP.
" Most likely you did configurations on the instance properties, instead
of the global properties, which is the one where the the configurations
should be done. That is why now you did set local properties
which are now false, for example : ume.ldap.access.server_port=[]
This is the cause why the LDAP connection data cannot be retrieved.
This is why the UME service cannot be started.
This is why the J2ee engine is not comming up. "
Pls help.

Hi Karan
1.Go to \usr\sap\SID\JCXX\j2ee\configtool and start the config tool.
2.No go to instance -
>server----->services--->com.sap.security.core.ume.services node.
3.Look for ume.ldap.access.server_port=[]
4.See if you have changed the value for the above parameter.If yes change the value to default and restart the engine.It will work
If at all you want to change any configurations you should do it following the below steps:
1.Go to \usr\sap\SID\JCXX\j2ee\configtool and start the config tool
2.Go to Global Server Configurations-->Services--
>
Please award points:

How to mirror between the production server and the multiple local servers.

I am currently looking for the best way to correspond between our production server and the multiple local servers. Because the production server is the only server that holds the latest updating applications, and our local servers are located for each developer’s local machines where the all modifications and creations are done. So when the developer locally makes changes for assets or files, he creates a patch archive first, then accesses to the production side Administration console screen and imports them from Application Management screen.
We tried to find a way to see the imported date before (so we know which one has been imported as new.), but there is no show in the Administration console Application Management screen. There is Creation date but it’s set as we initially imported the full archive files, but not patch files. Since between applications have some types of the dependencies (like fragments or image files), what is the best way to keep mirroring between the production server and local servers? Or we should simply not use patch file for updating server?
Thanks,

Check out this utility : http://blogs.adobe.com/livecycle/2013/03/adobe-livecycle-configuration-migration-utility.h tml
Thanks,
Wasil

Locale shown in the wrong language in the production server.

I have an application with a few projects which all have two locales - faroese and english. When I run the application on the default application server on my local machine it works fine with faroese locale but when I deploy to our production server and try to run it from there the faroese locale doesn´t work anymore for one of the projects.
For this project the values which are bound to properties files in my viewcontroller are shown in faroese as they should when the application is run from the production server but those values that are bound to the entity objects and view objects properties files do not work as they should anymore. The english values are shown instead of the faroese so the english property files are reached but the server doesnt seem to be able to figure out that the faroese properties files exist or it for some reason prefers the english locale for this project while it can figure out to show the other projects in faroese So I guess the error is somewhere in my Model project since the faroese locale works for my other projects on the production server but I can´t find out where.
So now I hope someone here has experienced something like and can tell me what I need to do to correct this.

Hi,
I think you hit a problem with upper/lower case names of the resource bundle files (*.properties).
Even windows file system is not case sensitive your file names MUST be exact as resource bundle manager is searching.
This works on embedded AS because the resource bundle files are located directly on the file system.
When you deploy the EAR/WAR file to the external AS then the files are located by the jar/zip finder which is case sensitive!
e.g.: bundlefile_EN.properies is not the same as bundlefile_en.properies
Hope this helps.
regards
Peter

FTP folder location is not showing in the production server but exist in the development server.

Hi,
a wired glitch in my SSIS 2005 package in production server where the FTP folder location is not showing but its existing in my laptop version
EX: - t01/app/_res folder
When i open the package from the production server "_res" is not showing within the remote path in the file transfer task.
but "_res" folder is shown in my development environment.
I tried with winscp FTP software in the production sever , and was able to access the "_res" location through the FTP software. What could this be? a BIDS sofitware version issue???
VS 2005 Version in development server
-Is 8.0.50727.42(Premier Partner ENU) .net framework is 4.5.1
VS 2005 Version in production server
-Is 8.0.50728 (Premier Partner ENU) .net framework is 2.0 Service pack 2.0
thanks.

When you open the package on the production server, do you mean opening it with your Windows account from BIDS on that server? Ff the ftp connection in the package has a password it will have been stored in your laptop when you designed the package. when
you deployed the pacakge on the server as a file and open it with BIDS then the password will be gone. You would have to go into the package ftp connection properties, reassign your password and save the connection and the package again.
Jan D'Hondt - SQL server BI development

Charm Impact on changing the production server

Hi All,
we currently using Charm for a three system ECC landscape.
Now currently so many changes are there in various stages.
now , the team is planning to change the production server to high availabitlity server.
there will not be any change in the transport route and all, only instead of existing server, the new server details will be added.
I just wanted to know will there be any major impact in the current chagnes.
kindly advice.
Thanks,
Subhashini.

Hi
its like system migration to the new server? or it is by client export?
can you refer the thread [How to replicate Existing running Production server.|How to replicate Existing running Production server.]
and read the note [Note 1395727 - ChaRM project does not work after product version changed|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1395727]
more further on
[Note 1394820 - SMSY: Converting SAP ECC system to SAP ERP system|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001394820&nlang=E]
check and update
jansi

Synchronizing Disaster Recovery site with the production server

Hi All,
One of the customer is asking the following query:
"How Disaster recovery site can be synchronized with the production server and how do they switch? Will the web logic server do this for them?"
This customer is having two sites one live and one a DR (Disaster Recovery) site on different location.
Can somebody answer my query?
Thanks in advance.,
Regards.,
Naveen

Firstly
Is your Datagaurd Physical( Redo Apply) or Logical( SQL apply)?
Does it have Datagaurd Broker?
When Datagaurd is setup in your environment - on the primary database( live database) the Datagaurd users LGWR or/and ARCH process to collect redo data and ship this data to standby ( DR site) and the FAL process to provide client-server mechanism for shipping archived logs to standby.
On standby database, The Datagaurd users RFS process to receive redo records from primary database, the MRP process applies redo information to standby database.
If the Data Gaurd Broker is enabled, Datagaurd also used DMON process to manage and monitor both primary and standby databases as a unified configuration.
When there is any connectivity issue to the standby and when connection is re-established, the accumulated archive logs are automatically shipped and apploed to stanby, until stanby is resynchronized with the primary. This process does not require any administrative intervention.
If there is a very large Archive Gap between the primary and secondary due to some major issue. Then the unshipped archive logs need to be shipped manually from primary to standby and needs to be applied in standby to sync up with primary. For some reason there will also arise rare issues like problem with not applying of archive logs though log shipping is success. So some work arround will solve it.
Comming to planned /unplanned outages of production site.
Datagaurd has Failover and Switchover( planned ) methods, These are not automatic, but have to be explicitly initiated by the administrator( So there will be downtime but minimal). Once initiated, Datagaurd automates the processes involved.
- S K A
Edited by: user12297346 on Jan 27, 2010 7:13 AM

Audio playback stops while the video is still running!!!

Hi friends...
I use my final cut for online streaming... and usually make a timeline for 11-12 hrs and run it in loop... everything worked fine all these years... but offlate we have been having problems with the audio playback... THE PROBLEM IS... while the timeline is still running and we can see the video on the screen the audio stops... but it stops after a few hours not at the time we start the timeline... as of now all we do is tap the spacebar twice to stop and start play again and it works again... but i would want a more permanent solution if anyone could help me out...
thanks
Anshu

Hi,
Yes, using all the default out of the box Coherence POF support, you would need to restart the cluster to pick up any changes.
Do you really need the Java classes on the server side? Depending on what server side functionality you are using you might not actually need Java representations of the .Net classes. For example, if these are you entities that are being cached and you are never calling code that deserialises them, then there is no need for Java classes.
You could potentially write your own implementation of a POF Serializer (PofContext) that is used on the server side that can dynamically add and change classes.
JK

Cloud Service: Powershell Error while waiting for Role to Start

Hi,
I have the below code when trying the deploy a cloud service with Powershell using New-AzureDeployment.
How can i get over this. This happens every once in say five instance of deployment.
System.Net.Http.HttpRequestException: An error occurred while sending the request. ---> System.Net.WebException: Unable to connect to the remote server ---> System.N
et.Sockets.SocketException: A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected ho
st has failed to respond xx.xxx.xxx.xxx:443
at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult)
at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult,
Exception& exception)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
--- End of inner exception stack trace ---
at Microsoft.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at Microsoft.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccess(Task task)
at Microsoft.WindowsAzure.Management.Storage.StorageAccountOperationsExtensions.Get(IStorageAccountOperations operations, String accountName)
at Microsoft.WindowsAzure.Commands.Common.Storage.StorageUtilities.GenerateCloudStorageAccount(StorageManagementClient storageClient, String accountName)
at Microsoft.WindowsAzure.Commands.Utilities.Common.WindowsAzureSubscriptionExtensions.GetCloudStorageAccount(AzureSubscription subscription)
at Microsoft.WindowsAzure.Commands.Storage.Common.StorageCloudCmdletBase`1.GetStorageAccountFromSubscription()
at Microsoft.WindowsAzure.Commands.Storage.Common.StorageCloudCmdletBase`1.GetCmdletStorageContext()
Thanks,
Pradebban Raja

Hi,
Please have a check on the below blog and check if it helps.
http://blogs.msdn.com/b/narahari/archive/2011/12/21/azure-a-connection-attempt-failed-because-the-connected-party-did-not-properly-respond-after-a-period-of-time-or-established-connection-failed-because-connected-host-has-failed-to-respond-x-x-x-x-x-quot.aspx
Regards,
Mekh.

Work Folders Stopped Working - The sync server needs the user's current user name and password

Our Work Folders deployment has just stopped working.
Once the user has logged in to ADFS they get the following error message "The sync server needs the user's current user name and password (0x80c80300)"
At the same time we see the following error in the file servers SyncShare event log:
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Microsoft-Windows-SyncShare" Guid="{9E6153AD-A829-4B70-B997-8E463A7A111C}" />
<EventID>1013</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2014-12-03T14:48:32.922225100Z" />
<EventRecordID>1178</EventRecordID>
<Correlation />
<Execution ProcessID="1988" ThreadID="2800" />
<Channel>Microsoft-Windows-SyncShare/Operational</Channel>
<Computer>fileserver.domain.com</Computer>
<Security UserID="S-1-5-18" />
</System>
- <EventData>
<Data Name="User">eyJ0eXAiOiJKV1QiLCJhbGciOiJSUzI1NiIsIng1dCI6ImVoZWxJMUFwWm9HT2VZdXU5NGZZb21tamUzayJ9.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.eCefzniju5qjqxIDdC2KCefkiNBNoGV-B1zg8EsnygUyV0LilPpANpv5uH75JJ9ekv9BN0vz7m6QezHEN4dYc5Z-6UJCzm7Wz6s1yNqVz-Sq5_wf_RrrHkxntcLXT2LHyyLN6ZxJy8uOF4vLw_fLsDzrNHkpaKUoevLAvNLI503IAiKDijKmQ0Qa2hZGsDT57yhKLGtjMXdqwx6FpFpP6vxA9qoUlR1E-tlt0ezTSD8j36djV9VbFpTlfeiH26D0n92T4exQCJkPdVzR42G7KbYyo9Acu0GGf7dnameWMQV9lT-Jtb7hH9xNReuVSVzqgtstsSDJR0mCsKJfLrdKVw</Data>
<Data Name="Error">0X80C80021 - ECS_E_SYNC_ADFS_UNAUTHORIZED</Data>
</EventData>
</Event>
I have attempted re creating the setup using several blog posts including:
http://blogs.technet.com/b/filecab/archive/2014/03/03/deploying-work-folders-with-ad-fs-and-web-application-proxy-wap.aspx. Including deleting all WAP rules, deleting and recreating the Relaying Party Trust and obtaining new certificates for the file
server.
ADFS and WAP are working correctly for our Office 365 federations and on-premise SharePoint, Exchange and other web applications
If I turn ADFS authentication off on the Work Folders server I can successfully connect and setup work folders on a domain joined computer, however as soon as ADFS authentication is enabled I get the above error.

Hi,
As you expressed, it should be an authentication issue.
I assume it will work by selecting Windows Authentication instead of ADFS in step shows in following picture.
The article also mentioned that the certificate is needed in following computers.
The self-signed AD FS certificate will need to be exported and installed on the following machines in the test environment:
Work Folders
Web Application Proxy
Domain joined Windows 8.1 client
Non-domain joined Windows 8.1 client
Thus I would like to confirm if certificate is also imported.
If you have any feedback on our support, please send to [email protected]

Sap sid _00 service is stopped while the production server is started.

Similar Messages

Maybe you are looking for