SAP SM 2007; Data variables
Hi,
Im currently doing a internship were im researching the possibilities to introduce SAP SM to a particular industry . One of my sub tasks for my dissertation is to set-up a SAP SM demo. I hope I can consult your memories as im using the nostalgic version 2007. Through delay in the completion of the new training server within my company I was forced to install an older version of SAP SM my selves.
I managed to install SAP SM and set-up the rational database but im facing problems with the multi-dimensional database. (scorecard)
I created dimensions, variables and I loaded data into the variables using a dBase file. However in e.g. the dimension "Channel" I made distinction between Export in Import. Now I can see the values of these inputs separately, but I do not get the result of them both calculated in TOTAL_CHANNEL. I can see the results of the inputs separately both in Pilot administrator and Excel but not in the dashboard(scorecard) but I guess that is because the KPI is based on TOTAL_CHANNEL.
Code channel dimension:
INPUT
EXPORT
,IMPORT
RESULT
TOTAL_CHANNEL 'TOTAL CHANNEL'
LEVEL
CHANNEL
TOTAL_CHANNEL = INPUTS
data DBase file im using as input for the measure
CHANNEL TIME VALUE
Export 1-9-2009 102004
Export 1-10-2009 120440
Export 1-11-2009 120430
Export 1-12-2009 150034
Export 1-1-2010 80004
Import 1-9-2009 40900
Import 1-10-2009 12400
Import 1-11-2009 45003
Import 1-12-2009 34005
Import 1-1-2010 65434
I hope someone can help me out, I know its a long time ago but so few information about the 2007 version is still left.
Regards,
Davy
Davy,
You have to make sure that you have built out all the appropriate areas in the Administrator interface.
First, check to make sure that your Model Connection works. If not, check your LinkID in PAS to make sure it is configured correctly.
If your model connection works, check that you have designated that model to be used for the Context/scorecard in question.
Also check Set KPIs to make sure you have CREATED the KPIs in SSM and associated those with measures from the selected model.
Regards,
Bob
Similar Messages
-
What is master data in SAP CRM 2007 in Web Client
Hi All,
plz could you explain what is the master data in SAP CRM 2007 In Web client intraction center.
regards,
pashaMaster Data are as under:
Business Partner
Product
IBase
Regards,
Rajesh Banka -
SAP BW Hiearchy Key Date Variables - Web Intelligence
Hi,
I have couple of issues / scenarios which are not working as expected. First, as I understand that hiearchy variables are supported by WebI.
Scenario 1
I have created a hiearchy key date variable within the report and made it optional. I run the report an no key date appears. It should appear. If I then make the hiearchy key date to mandatory I get a database error. Looks like there is a problem with hierarchy key date variables?
Scenario 2.
I change the hierarchy key date so it uses the key date of the query (so no longer a variable).
As an example,I have employee "Employee X" assigned to "team A." This team moves from the Desktop team to the IT team on the 01.04.2011.
IT
A - 01.04.2011 -> 31.12.9999
Desktop
A - 01.01.2011 -> 31.03.2011
I have a hiearchy variable so I can select a team as requied (using the object 0ORGUNIT) If I run the report using the key date 01.04.2011 the WebI report displays the current hierarchy nodes i.e.
IT
A
and the data shows correctly,
If I now re-run the report using the key date 01.03.2011 in the selection screen in the WebI report the following is still shown
IT
A
If I select team A - no data is displayed. So it looks like via the use of the "Use query key date" for the hierarchy key date works but not in selection screen which is a problem.
Is this a bug or am I doing something wrong?
ThanksHi,
I have now got scenario 2 working - well I didnt do anything apart from run it InfoView and it is fine. But for some reason does not work in WebI Rich client - I will have a look into this furrher but am happy that it works in infoview. Sceanrio 1 is no working still I have run it in InfoView and get the error "A database error occured. The database error text is: Failed to execute MDX query. Reason: Specify a value for variable Hierarchy Key Date. (WIS 10901)" This hiearchy key date is th variable which I have created and assigend to the hiearchy so that a "hierarchy date" can be selected.
+Scenario 1+
+I have created a hiearchy key date variable within the report and made it optional. I run the report an no key date appears. It should appear. If I then make the hiearchy key date to mandatory I get a database error. Looks like there is a problem with hierarchy key date variables?+
Any help is appreciated.
Thanks.
Edited by: Leo on Apr 25, 2011 4:20 PM -
Sap CRM 2007 Security related issue
Hi All,
I am working on SAP CRM 2007 security.
I have scenario, which we are trying to fix.
There are two users A and B.
A is assigned to role X
B is assigned to role y
Business Partner 123 is created for user A
Business Partner 456 is created for user B
These Business Partners are assigned to Authorization Groups.
See below:
1)Authorization Group (LK01) is assigned to Business Partner --123.
2) Authorization Group (LK02) is assigned to Business Partner --456
3) Authorization groups LK01 is assigin to user A in PFCG role X
4) Authorization groups LK02 is assigin to user B in PFCG role Y
a) User A assigned with PFCG role X>Authorization Group (LK01)>BP 123.
b) User B assigned with PFCG role Y>Authorization Group (LK02)>BP 456.
Note:
1) Authorization Groups are assigned to BPs under the Control tab.
2) These Auth Groups are assigned in Authorization Object in PFCG role.
Now, USER 'A' should not be able to work under the BP 456 as this BP is assigned to authorization group LK02.
The issue is when we open the WEB UI and login with user A role X, He can search for the BP 456 assigned to Auth Group LK02.
User A can open the Interaction History and edit the Service Order created using the BP 456.
He can Edit the following in Service Order details:
1) General Data Status (from created to complete), Contact person, Sale Rep name.
2) Organization Data like Sales Office, Sales Org Unit, Distribution Channel
3) Business Partner.
However, one good thing is he cannot edit the Account details like Account ID, House No, Employee Resposible, the message he get is "No authorization to change partner with authorization group" which is a
good thing.
I have tried to be precise, please let me know if you require more information.
Regards,
Dave.I suggest the following:
Please, check whether the system works if you activate the implementation BUPA_F4_AUGRP.
In addition check the notes 559662, 674869 and 782927. Maybe the notes are already implemented but you can try then the implementation of the BADI (SE19). It should resolve your issue.
I have implemented this Badi solution before, and after activation; the search help ; nor search result list did NOT show any Business partners anymore that had an authorization group I was not allowed to see.
kind regards
Davy Pelssers
SAP CRM/Security consultant -
Bounce Management in SAP CRM 2007
Hi Experts,
we have SAP CRM 2007 and I have a few questions about Bounce Management.
It is a very simple scenario, so it´s fine if only hard bounces for incoming EMails are handled.
1) Do you need ERMS for that simple form of Bounce Mgt?
2) Is the Usage of Inetraction Center required? (We do not want to)
3) Is it possible/recommended to create Activities out of incoming bounces?
4) Can you segment on Bounces, not only within the Campaign Automation?
5) What ist the effort/set up to use Bounce Mgt in that simple scenario about?
Thanks a lot
FlorianYes, I was mentioning SAP Note 897730. The major pre-requisite mentioned there is Event linkage settings through SWETYPV transaction and in your case you just need to do the Rule Modeler settings. If you are using DEFAULT policy you do not need to do anything in Service Manager Profile.
The note pre-requisites mentioned are
The required services and service manager profiles for using the E-Mail Response Management System (ERMS) are defined: All entries necessary for bounce management are delivered in the default Customizing. As I mentioned before Service Manager Profile: Bounce is already defined and you are going to use that profile. The required service in your case would be "Bounce Data Update" or one of the 5 standard service mentioned in this note. These are already defined and taken care of in standard configurations. Therefore, you do not need to do anything over there.
Please do the above two settings and if you have any issues please come back to me. I am sure you won't have any issues with the requirements that you mentioned. I just took one hour to set up hard bounce scenario. Only if you are planning to use services that are not standard it becomes slightly tricky. In our case major issue was that there was an error in the standard workflow. I did not know much about Workflow bindings etc. before, but then I had to dig deep into this and it gave me an opportunity to learn workflows. This was the good thing that came out of all this.
Regards,
Deepak
Please note you will have to do the Event Linkage settings in SWETYPV transaction.
Edited by: Deepak Ahuja on Jun 5, 2008 9:15 AM -
Error while installing SAP NetWeaver 2007
Dear All,
I got an exception while installing SAP NetWeaver 2007
on Windows 2003 Enterprise Edition (service pack 1). This exception occured when installer tried to install MaxDB database. When I saw installation log file, I found following msgs. Pls suggest me appropriate solution so that I could install SAP NetWeaver 2007 on my m/c.
I am giving log details bellow.
Thanks,
Regards,
Rajendra Pote.
Log file details:
(Aug 3, 2006 1:54:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\JP1\log.txt for details.
(Aug 3, 2006 1:54:12 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="Thu Aug 03 13:54:11 GMT+05:30 2006 An Error happened during the Change of the MaxDB Database passwords. Check end of Logfile C:/DOCUME1/ADMINI1.SER/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="Thu Aug 03 13:54:11 GMT+05:30 2006 An Error happened during the Change of the MaxDB Database passwords. Check end of Logfile C:/DOCUME1/ADMINI1.SER/LOCALS~1/Temp/MaxDBSAPNWPREV.log")
at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:260)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
MaxDBSAPNWPREV.log file details
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Checking x_server
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB program: c:/sapdb/programs/bin/x_server.exe
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Found c:/sapdb/programs/bin/x_server.exe
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Calling: "c:/sapdb/programs/bin/x_server.exe" start
MaxDB: 18641 ERROR: XSERVER is already running!
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: rc of x_server call = 32
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: dropping database instance: JP1
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Try to establish connection to JP1
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: command failed: <DBMException -24950 ERR_USRFAIL User authorization failed>
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: rc of Method: 0
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: sdbuninst
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB program: c:/sapdb/programs/bin/sdbuninst.exe
Thu Aug 03 13:54:14 GMT+05:30 2006 MaxDB: Calling: "c:/sapdb/programs/bin/sdbuninst.exe" -all
MaxDB sdbuninst:
MaxDB sdbuninst: uninstall following package(s):
MaxDB sdbuninst:
MaxDB sdbuninst: Database Kernel c:/sapdb/jp1/db 7.6.00.23 32 bit
MaxDB sdbuninst: Server Utilities c:/sapdb/programs 7.6.00.23 32 bit
MaxDB sdbuninst: Webtools c:/sapdb/programs/web 7.6.00.23 32 bit
MaxDB sdbuninst: ODBC c:/sapdb/programs 7.6.00.23 32 bit
MaxDB sdbuninst: JDBC c:/sapdb/programs 7.6.00.24
MaxDB sdbuninst: Messages c:/sapdb/programs MSG 0.3215
MaxDB sdbuninst: Base c:/sapdb/programs 7.6.00.23 32 bit
MaxDB sdbuninst:
MaxDB sdbuninst:
MaxDB sdbuninst: found instance JP1
MaxDB sdbuninst: cannot remove package "Database Kernel": first you have to remove all instances
MaxDB sdbuninst: fatal error at Th, Aug 03, 2006 at 13:54:27
Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB Error during call to sdbuninst, rc= 1
Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: Done with call_sdbuninst
Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: rc of Method: 1
Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: End of CallSdbuninst
Thu Aug 03 13:54:28 GMT+05:30 2006 MaxDB: End of uninstallation
MaxDb_SAPNW.log
Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: Start SoftwareCheck
Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: IndepProgPath:
Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: IndepDataPath:
Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: Software doesn't exist, Variable MAXDB_SOFTW_EXISTS set to NO
Thu Aug 03 13:44:40 GMT+05:30 2006 MaxDB: end of Check Section!Hi,
the following parts of the log should give you some hints about what might be wrong:
"dropping database instance: JP1"
"found instance JP1 "
"cannot remove package "Database Kernel": first you have to remove all instances"
It seems you still have a MaxDB instance named JP1 on your system. This instance could not be dropped, because it was not possible for the uninstaller to connect to the db instance:
"dropping database instance: JP1"
"Try to establish connection to JP1"
"command failed: <DBMException -24950 ERR_USRFAIL User authorization failed>"
So, if enough parts of the software are still available and you know how to connect to the JP1 instance (using either the Database Manager GUI or DBMCLI), you can drop the instance and proceed with the installation.
Regards,
Roland -
Creation of Dynamic Date Variables to be used in WebI reports
What we are trying to achieve is to create 4 optional filters (Current Day, Current Week, Last Week, Last Month) on 4 different dates which will allow the users to use them in WebI reports.
When using an optional SAP Customer Exit variable in BEx and creating a Universe on top, the filter becomes mandatory (i.e. the whole Universe is filtered by the SAP Exit, irrespective of whether the filter is used in the WebI report). Even if the filter is flagged as optional at the Universe level, it still behaves as mandatory.
If each filter becomes mandatory then we'll have to create 16 different Universes (for each optional filter and date combination)! This is not feasible.
I've seen in other posts that MDX Statements are not currently supported for Universes base on BW and SAP Exit should be utilized.
So with the existing BO version, is it possible to create optional dynamic date variables or is that a product limitation?
We are on XI3.1 SP3 FP3.1
ThanksHi Adam,
In BEx, I would create this query very easily using the "Amount" key figure twice in my results and restricting each with a different SAP standard out-of-the-box delivered variable. For your reference, the variables in BEx are: 0FPER and 0FYTLFP.
If I expose these variables in my OLE DB for OLAP query, they are not transfered into the universe, but rather act as filters on the entire universe. I've seen in documentation that only "Ready for Input" variables can be transfered as options into the universe which is not something that I have seen mentioned in this thread.
>> In the BEx Query you have the option to either make the variable "ready for input" or not. The behavior is the same in Bex or in the Universe / Web Intelligence. "Ready for input" means the user can actually provide an input and without the flag the user can not provide an input. Yes those variables are supported in the Universe.
Why this is a problem: I can't create separate universes based on potential variable periods that users might want to see. Additionally, many financial reports require concurrent use of these measures in the same report. Also, in reality it's not 2 variables, but dozens.
>> Which is a decision you make already on the BEx query level. if you decide that the variable is not ready for input then the user can change the timeframe in BEx either.
Also, I don't have a good way to mimic the standard out-of-the-box functionality given with BEx in BO. If I custom create all my variables in the universe, how do I do a lookup from the system date to the fiscal calendar that is stored on the BW server? In other words, how does BO know which date belongs in which period? (the same would be true with factory calendars for a different functional area).
>> Variable are created in the BEx query and the Universe will leverage those.
If you want a dynamic date range then EXIT variable as part of the BEx query - ready for input or not - is the solution.
regards
Ingo Hilgefort
The only work around I can see is to require users to enter the current fiscal period and have the BO reports filter based off that user entered value. This is unfortunate as the entire purpose of SAP Exit variables is to avoid having to require user input at report time. -
SAP CRM 2007 - How to Access a Table from one view to another via ABAP BSP
Hi experts, I need your help.
I am working in SAP CRM 2007 developing code modifiying views using transaction "BSP_WD_CMPWB" and my problem is the following:
After the "Account Identification" process I go to "Create Case" and click in "Complaints" option in the navigation bar.
Here there are several views involved, like "General data" and "Parties involved"
"General data" belongs to the component "BT126H_CALL" and the name of the view is "SCDetails.htm"
"Parties involved" belongs to the component "BTPARTNER" and the name of the view is "Partner.htm"
The "Partner.htm" view has a table that is displayed using a "<chtmlb:configTable . . . table = "//BTPartner/Table" instruction.
I need to acces the table "//BTPartner/Table" that belongs to "Partner.htm" in the view "SCDetails.htm" and add data into it.
How can I do that ?
Add the data in the view "Partner.htm" itself is very simple, I am using the "EH_ONINSERT" method but I have not idea how to do that from "SCDetails.htm".
Thanks in advance for your help.
Best Regards.
Exequiel.Hi,
as I understand from your question you would like to add a partner to the complaint document.
The complaint document is a 1Order document and has the root genil node named BTOrder. Using the genil relationships you have to get the BTPartnerSet and then the right Partner Relationship.
You will find a lot of information in the newsgroup on how to do this by doing a search.
But a quick help would be to use the sapgui transaction genil_model_browser, component set ONEORDER and using the tree structure navigate from the BTOrder root node to the Partner set.
Best regards,
Erika -
Not able to access the Date variable in Bex report after SP upgrade
Hell Experts,
We have upgraded the support pack to 27 and after that we are not able to access date variable in Bex report.
We are not able to restrict the Posting date on variable, we are getting the message "Operation failed! No detailed error information from backend available".
Thanks
ChetanHi,
carry out basic checks like RSRV for the field,query ,Infoprovider on which this query is based..
Check whether there is any in consistent value in the posting date..
check whether objects are active correctly..
else serach for SAP note or raise OSS to SAP..
Thanks and regards
Kiran -
Standard SAP EXIT on Text Variables
Hello Experts,
I am working on Customer Aging Analysis. first of all I want to use standard SAP Queries and want to have a look on standard SAP EXIT created on variables.i have opened the query no 0FIAR_C03_Q0005. here it shows me one text variable 0P_KEYD2. now i want to see that SAP EXIT created on the variable of Posting Date.
I went to SE37. i entered the Function Module EXIT_SAPLRRS0_001. but i didn't get standard SAP EXIT given by SAP.
Can anyone tell me from where i can activate or Get the standard SAP EXIT ?
Regards,
Komik ShahHi Mansi,
Thanks for your reply.
now if i want to add that SAP EXIT in EXIT_SAPLRRS0_001, then can i add it ? or do i have to directly use RSVAREXIT_0P_KEYD2 ??
All standard SAP EXIT will work the same way you mentioned ?? means goto SE37 --> type Variable Name --> get that exit.
Regards,
Komik Shah -
On order Stock and stock in transit with date variable
Hi experts.
İt may be an easy question.
We need to see on order stock (menge,can be seen T code MMBE) and stock in transit(T CODE MB5T) with date variable.
Any T code or table...?
I mean that for exp: on order stock and sttock in transit on 02/02/2012..
Thanks in advance..Hi,
as per my knowledge you have to develop report using following table
how many Po closed for material
how many MIGO happens and how many remain etc
table EKPO
EKKE
EKBE
MSEG
MKPF
[Report|http://wiki.sdn.sap.com/wiki/display/ERPLO/SAPStandardReports]
[tables req to get date wise stock report;
Regards
Kailas Ugale -
Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007
Gentlemen,
I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
My current Support Package Level is:
SAP_ABA 700 0015
SAP_BASIS 700 0015
PI_BASIS 2006_1_700 0006
ST-PI 2005_1_700 0006
CRMUIF 600 0003
SAP_BW 700 0017
SAP_AP 700 0012
BBPCRM 600 0002
First I had the following error:
Syslog: k CQ3 : UMGSETTING& rscpexcc 12
GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
0 d / 0 i / 0 u / 6 = 100% ucf FUPARAREF
6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
0 d / 0 i / 0 u / 1 = 100% ucf TFTIT
1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
successfully set a temporary lock on table REPOSRC
REPOS /SAPCND/LDETERMINATION$14 A replaced.
REPOS /SAPCND/LDETERMINATIONU14 A replaced.
[dev trc ,00000] Wed Nov 26 16:33:14 2008 1315447 8.171484
[dbdsoci. ,00000] *** ERROR => invalid offset 0 for placeholder 16
71 8.171555
unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
dsql_open returned with unexpected error code 2
Please contact the SAP support.
End of Transport (0016).
date&time: 26.11.2008 - 16:33:14
5 warnings occured.
3 errors occured.
Main import
End date and time : 20081126163314
Ended with return code: ===> 16 <===
After I got this error I upgraded the Kernel from patch level 159 to 179,
After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
From Import logs of the queue I can see the following,
Summary:
24 DOCUT imported.
16 DYNPS imported.
30 DYNPT imported.
387 REPOS imported.
43 REPOT imported.
Totally 505 Objects imported.
Totally 3636 tabentries deleted.
Totally 14 objects activated.
Totally 12229 tabentries imported.
62066888 bytes modified in database.
[dev trc ,00000] Wed Nov 26 18:14:19 2008 20996974 40.917838
[dev trc ,00000] Disconnecting from ALL connections: 30 40.917868
[dev trc ,00000] Disconnecting from connection 0 ... 287 40.918155
[dev trc ,00000] Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
5759 40.923914
[dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
921 40.924835
[dev trc ,00000] Now I'm disconnected from ORACLE 8230 40.933065
[dev trc ,00000] Disconnected from connection 0 90 40.933155
[dev trc ,00000] statistics db_con_commit (com_total=527, com_tx=307)
59 40.933214
[dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
52 40.933266
Disconnected from database.
End of Transport (0004).
date&time: 26.11.2008 - 18:14:19
2 warnings occured.
Main import
End date and time : 20081126181419
Ended with return code: ===> 4 <===
Please advice me.
Regards,
AhmedI have similar problem while updating support packages in SAP R/3 4.6C environment.
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
Here is an outline of series of events that happened:-
We are applying in support packages in SAP R/3 4.6C HR Development
(TFI) environment. We planned with installing all the SP stacks
starting from 1 to 9.
-Updated kernel, tp , r3trans and SPAM level to latest level.
We received the following error in Import_Proper step of Support
package upgrade. Though the step has been repeated after making sure
that we have all the required files at OS level, we go this error
repeatedly.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Main import
End date and time : 20081205192603
Ended with return code: ===> 16 <===
When we renamed Co-File & data_file at OS level to see if the files are
created again and reran we got the following error.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.24 46D
Main import
End date and time : 20081205185117
Ended with return code: ===> 12 <===
We tried importing the individual support package SAPKB46C52 from STMS
and the transport cancelled at an earlier step with the same error.
Dictionary import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Dictionary import
End date and time : 20081205195929
Ended with return code: ===> 16 <===
While playing around I have deleted the transport from the tp buffer
and added manually, before doing so I made a backup of tp buffer at OS
level and I got following error though I reverted back to backed-up
copy.
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Wrong sequence of Packages in the tp buffer (e.g.
SAPKB46C52 )
I then tried to disassemble the package separately and reran the
import queue. Now I have RC 8 on that support package.
When I did R3trans -l on the datafile it completed successfully.
D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
R3trans finished (0000).
I verified the size of file "CSR0120031469_0023301.PAT" and it is the
same as mentioned in SSP.
Let us know is there is a workaround. -
How to hide installbase components in SAP CRM 2007 on UI screen
Hi Experts,
How to hide Installbase and its Components on UI Screen of SAP CRM 2007.In which BSP component Installbase and its components are there and how to remove it.Advanced thanks for suggestions.
Regards
KrishHi Krishna,
First I would like to know that your scenarios are B2B or B2C. Based on Scenario...in SPRO Master Data->Define Account Identification Profiles.
Under Object Components remove ICCMP_IBASE.
Hope this will solve your issue.
<<text removed>>
Regards,
Albert
Edited by: Matt on Apr 29, 2009 3:23 PM
Edited by: Matt on Apr 29, 2009 3:24 PM - do not ask for points -
Geographic Information System (GIS) functions in SAP CRM 2007
Dear all,
I am currently working on a SAP CRM 2007 implementation project that consists in replacing an old customer service application.
Currently this application is managing service technicians' territories with embedded GIS functions (it relies on latitude and longitude data to assign the closest technicians to a service order).
I would like to know if SAP CRM 2007 is covering the following:
- GIS functions;
- Ability to assign a technician based on this;
- Ability to visually see the map and draw technician territory changes on it;
- Ability to optimize technician route (mileage).
I cannot find insights about this in the SAP Help.
So, where can I find some details / documentation about this?
A third party tool would be necessary and also its integration to SAP CRM?
Thanks for your help.
Brice.Brice,
So basically I don't see this being out of the box functionality, however you could build something for this.
1. You need to store the geo co-ordinates for the customer on the customer master or be able to "bolt out for this".
2. Create a new "partner determination rule" that would make a call to the external system to propose a technician on the service order.
3. Have a punch out on the service order screen that links into a web like GIS application where you could visualize this and send change data back into the CRM service order.
Now if someone else knows that CRM 2007 can do what you described out of the box, I would love to see the demo. We have a similiar requirement, where we need to keep track of the mapping, but no need to perform the routing logic.
Take care,
Stephen -
Add Date variable to DB backup to file
Hi All
Running AIX 5.3 ECC6, and Maxdb 7.8
I use DBA Calender to schedule my backups
When creating a backup template for backup to file is there a way that i can add a date variable.
So that in the filename that is written to disk the date is included in the filename
Because when i backup this flat file to tape using TSM i want the date of the backup to show.
RegardsHi,
As per the link below there does not seem any option of getting date variable. Also hardcoding each date would not be a good solution.
http://maxdb.sap.com/doc/7_7/c3/64bc3e75b54f0381bf558a42d5d4f5/content.htm
Above link shows standard options available for backup template creations.
Hope this helps.
Regards,
Deepak Kori
Maybe you are looking for
-
Hello, I am having problems saving a PDF sent via email to thr adobe app. When I follow the app instructions on the email it does not give me the option to save it to adobe? Any ideas how I can install it or get round it? Thanks
-
Microsoft web site (safety scanner) problem but works in Safari
When I go to the site "https://www.microsoft.com/security/scanner/en-us/default.aspx" with Either Firefox 18.0.8 ESR Or TOR version of Firefox it gos into a loop where I continually see the rotating icon. It never displays anything on the screen and
-
im working with dv ntsc whats the best way to export out of after effects into fcp so as no render will have to take place thx j
-
Hi Guru, CAN YOU ASSIGN ONE POSTION TO DIFFERENT ORG UNIT? Is it possible or not. Regards, Kadalur
-
I tried installing all sorts of codecs, only to find that totem, and every other video/audio viewer was unable to play my file (it's avi). With totem I get a message saying Divx mp4 decoders are not install. In ffplay, mplayer, and vlc I get "illegal