SAP smartforms (logo)

Hi Experts,
I have two page in the form, and i created graphics logo in every page with codition.
( condition g_logo = 'X'.)  and this g_logo is delared in form interface.
The logic is working fine for the page one, but for the page 2 is not working( means logo wasnt appeared )
Please suggest, how to resolve this prob.
Thanks.

Hi,
I think you have copied the first place so its in 'initialize' mode not an 'incerease counter'.
you can set it up in "pages & windows" , click on the second page......
regards ...
Santosh

Similar Messages

  • How to make use of label printing in sap smartforms

    Hi Dear,
    How to make use of label printing in sap smartforms.. I need to print four records from internal table into sap smart forms. It will
    come as four labels.All page should follow the same procedure... How to do...please help me..
    Regards,
    Nikhil

    Hi,
    Please go through below link, would be helpfull for you.
    [http://help.sap.com/saphelp_nw04/helpdata/EN/6b/54b4b8cbfb11d2998c0000e83dd9fc/frameset.htm]

  • Regarding sap smartforms line items

    hi,
    this is regarding line items in sap smartforms
    when i am executing single line item i am getting out put
    when i am executing with 2 line items  i am getting error  like bellow
    You tried to switch to the next table column, but no other column exists. The current column is 9. The line type IT_GEN contains only 9 columns.
    plz explain clearly

    Hi,
    if you are using template and the line type is for 1 to 2 lines in the template... make sure that column position you mention is equal to the number of cells in the line type... if the data is displayed in the second row the row position should start from 2 and and column position should lie between 1 and 9.
    Just a suggestion ... its better to go with table node instead of going with template...
    regards
    padma

  • Need to print SCC-14  and UCC-128 barcodes through SAP Smartforms

    Hi all,
    I have Two labels to be printed using smart forms.
    But in one label the barcode should be of SCC-14 type
    and in other the barcode should be of UCC-128 type.
    <b>How to print SCC-14  and UCC-128 barcodes through SAP Smartforms?</b>
    As standard barcodes do not meet my requirement i have created custom barcodes in transaction se73 of required height and width .
    This is as:Se73>System Barcodes>change>Create>New-->:
    I have given bar code and short text.
    Narrow Module Width &Linear Height&Code128 Mode given default values.
    But in this process where can i set the barcode should be of SCC-14.
    > I have known that if we give Code128 Mode =
    > 'U'-->It is like UCC-128.Is it correct ?
    >
    > But how can i know for SCC-14 barcode.
    >And How many inches is euqal to 1 unit of Narrow Module Width &
    How many inches is euqal 1 unit of Linear Height?
    Please help me in this regard.It is urgent.
    All solutions from you will be fully rewarded.
    Thank you in advance.

    Hi  Rama,
    We are working to print Bar codes using Smart forms.
    Barcode is printing in label (4*6 Inch’s) using printer (Zebra Z4 M PLUS (300 DPI)) (TLP-3842) which supports ZPL Language and Device type is ZLZEB3 (300 DPI).
    We are printing bar codes successfully.
    But After testing bar code using bar code tester (BC TESTER 4.4) software tool.
    The results are failed.
    We are expecting results: Like bellow.
    Value formatted type is: EAN
    Value is “[C142007470 “
    Total Description:   420. “Ship To-Deliver to “Postal Code a Single Postal Authority 07470
    Current Situation:
    Here we are Created Bar code (Ship to Post) in SE73 with
    Bar code type is: Code 128
    Width is: 08
    Height: 300
    Mode is: A    (Even I tried with ‘N’ and ‘U’)
    UCC check: Empty.
    I added this to character format in my Smart forms.
    Text in smart form is: ,,,,<C2>&W_POSTAL_CODE&</>    for  P1 Paragraph.
    Using this functionality  we are able to print a Bar code in Label.
    But while testing using BC Tester
    Values are showing:
    Value formatted type is: EAN
    Value is “42007470 “
    Total Description Values:  Empty
    The Type is ‘EAN’ is when we select the Manually EAN Radio button (but this not capturing automatically this is problem we are facing).
    Even I tried with some changes like bellow:
    But Forcefully writing some code in Program lines  Smartform: 
                   concatenate '420' fs_zediu017-pstlz into w_postal_code
    After this forcefully adding this Value [C1  in Before W_postal_code Element text :
    Text in smart form is:        ,,,,<C2>[C1&W_POSTAL_CODE&</>    for  P1 Paragraph.
    After this we are tested using BC tester
    Every thing is displaying correct Vales which mention above when we manually select the Value formatted type radio button ‘EAN’ but this Wrong.
    Client need when testing bar code using BC TESTER 4.4 it should be display to take EAN radio button and showing all the Values.
    Please let me know if you get any idea on this ?
    Thanks,
    Bathini.

  • Printing QR-Code barcodes in SAP smartforms

    Hi,
    Is it possible to print QR-Code barcodes in SAP smartforms using system barcode font? Can anybody please let me know the font settings for QR-Code in SE73 font maintenance?
    A sample QR-Code lablel can be found [here|http://images.orkut.com/orkut/albums2/ATUAAADhaahG5MxsqQ66lcSO9oHRWD3X8zh7yv1kEakKwMtVHchChN1WfZlM__2D0_o8H7AS4_UaTTCymQQtvXHb9-q3AJtU9VCWnzkZ4gC1sVnCekVuQ90qmhzeMw.jpg].
    Regards,
    Milan

    Hi Milan,
    I'll blog in SDN about my research that I presented at TechEd during session CD119 (blog) but I'll begin sharing with you some ideas.
    Basically, without relay on any printer specific driver I would propose to follow the following steps:
    1.Generate the QR Code image file (.PNG) with one of the methods presented in the following pages
    2.Upload the image into the SAP system
    2.1 Convert the generated file (file.png) to TIFF using SAP IGS class CL_IGS_IMAGE_CONVERTER (see GRAPHICS_IGS_IMGCONV_DEMO)
    2.2.Upload. Use report RSTXLDMC to upload the image into SE78
    3.Include the image into the Form:
    3.1.SAPScript/:INCLUDE ZHEX-MARCO-name OBJECT TEXT ID ST
    If everything is clear, the missing point should now be the first one. To generate the PNG from ABAP I found some options if you like, the better I think is presented in my open source project called abap2qrcode published here http://code.google.com/p/abap2qrcode/.
    I know it's not trivial and I'm curious to know what do you think about it.
    Sergio

  • SAP Certified Logo

    Does any one know if the SAP Certification team in Germany have released a "SAP Certified Professional" Logo yet?... I've been told that they are working on one to release as a result of requests coming through from certified consultants.
    The certificate and card are fine but as an independent consultant it would be nice to have a SAP certification logo as well to include in ones documents when for example invoicing clients.  Being Oracle Certified too, Oracle have provided me with an "Oracle Certified" logo... so just waiting fro SAP to do the same.
    If anyone has any information on this please reply to this message.
    Thanks in advance.

    Quesion cancelled.

  • How i can delete purchase requistion  item from sap smartforms

    how i can delete purchase requistion  item from sap smartforms.

    Hello,
    Smartforms are printable documents,u cannot delete from smratforms.
    U have to handle this in the print program.
    Regards

  • SAP Certified Logo / S-userid ???

    Hello friends,
    Last week i have cleared C_TADM51_70 : SAP Certified Technology Associate - System Administration (Oracle DB) with SAP NetWeaver 7.0 test.
    I have seen few threads regarding discussion on :
    SAP Certified Logo/Technical Consultant Logo
    S-userid  
    I want to know does everyone get these from SAP ? I have appeared for direct certification without attending any training and did certification directly with SAP INDIA.
    As of now i dont have any proof that i am certified and protector told you will get hard copy in 4 week..
    thanks
    ashish

    Ashish
    Yes you will get your hard copy of certificate in 4-6 weeks time.
    Once you get that, you can send to SAP Education or Kenneth from this forum - Your certification Number and other relevant details shared on many threads here.
    Your S-userid is one of its kind and is given to every certified consultant.
    For the logo again, you will need your s-userid.
    Please mail it to Kenneth and he will mail you back the relevant logo.
    All the best!
    Rgds,
    Zub
    reference - Clarification regarding certificates and logos from SAP certification exams

  • How SAP smartforms are different from Adobe forms

    Hi,
    Can  anyone explain me how SAP smartforms are different from Adobe forms
    Tthanks&Regarda
    Rama Devi

    Hi,
    Both are same but adobeforma are advance version of smartforms
    for more details check with the following links
    Smartforms:
    tcode:smartforms
    [Smartforms|http://help.sap.com/saphelp_nw04/helpdata/EN/a5/de6838abce021ae10000009b38f842/content.htm]
    Adobeforms:
    tcode: sfp
    [Basics of Adobe|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4]
    [Adobeforms|http://help.sap.com/saphelp_nw70/helpdata/EN/c8/4adf7ba13c4ac1b4600d4df15f8b84/content.htm]
    Hope this helps you.
    Regards,
    Rajani

  • Procedure to replace the SAP CRM logo

    Procedure to replace the sap crm logo with client logo?

    Hello,
    You shoud check the following document in the service market place(#). In page 25 of this document, you'll find how to change logo.
    http://service.sap.com/rkt-crm
    -> SAP CRM 2007
    -> Technology
    -> Step 2: Prepare for your project
    -> How-to Guide Copy and Adjust Skins
    Hope this helps.
    Edited by: Yasushi Kohsaka on Aug 26, 2008 12:54 PM

  • Smartforms: logo to PDF

    We need to include our company logo in a PDF. The PDF is generated by FM CONVERT_OTF from Smartforms OTF output.
    Problem: The printed PDF has a nasty gray background in the white portions of the logo. Output directly from SAP looks fine both on screen and on paper. The PDF looks fine on screen as well.
    I suspect this has to do with a difference in resolution between the original logo and whatever ends up in the PDF. I've tried 300 and 600dpi bitmaps and TIFFs, using a web-optimized palette, all with similar effects. The images were created with a graphics editor, starting from EPS files, so quality shouldn't be the issue here.
    Any ideas?

    Hi Joe,
    no, I didn't solved my problem. I used a monochrome logo-picture (black and white) as for a workaround but don't know how to import a colored picture which also looks well?!
    Regards
    Steffen

  • Smartforms logo upside down

    Hi,
    I have this problem when I'm printing smartforms on a HP Laser Printer 2420 logo is upside down and back to front (on minolta it's good). I read SAP note my admin installed newest drivers from hp.com and it didn't help. I'm using printer I2SWIN in SAP to get polish fonts. If I change a printer to I2HP4 the the logo is printed in good orientation but the picture is awful, not acceptable.
    Any help?

    Hello Quintus
    Did a search and found this:
    Re: logo printing reverse
    This is a printer issue and theres a resolution for it
    Thanks,
    Anand

  • Smartforms: logo

    Hi,
    how to insert a company logo on an exixting purchase order using smartforms.

    hi ,
    SE78
    import the logo in sap which is in bmp format.
    give some zname while uploading
    then save it.
    now use in smartform as follows:
    make a window or template.
    in that create a graphic
    and mention the name which is mentioned while uploading.
    and the language.
    then save and activate.
    then excute ME22N to  see the logo.
    please reward me if it is useful.
    thanks
    AM

  • Transfer Smartform Logo/Digital Signature To Unix

    Hi Experts,
    I need to transfer Smartform's Logo/ Digital Signature to unix server along with other text of smartform.
    Current Status:
    Text on the SF has been converted and tranferred to Unix using Dataset operations (Character by Character Approach in Binary Mode)
    Problem:
    Target file in Unix is not displaying the Logo and digital signature that is there in SF.
    I am using 'Convert_OTF' and then 'QCE1_Convert' FM to gget PDF data and then transfer each character to dataset using Binary mode.
    Please guide how to get Graphics also.
    Thanks
    Depesh

    Hi,
    Yes, I have tested the smartform using Print Preview as well as I have downloaded it to desktop in PDF format before sending it to UNIX. Downloaded as well as print preview file is showing the Graphics but when sent to Archive for UNIX directory, Graphics are not diplayed.
    I am working on ECC 6.0.
    Do you have any idea if the images in Binary format when sent to UNIX are readable directly or we need some other patch/storage maintenance for extracting images in UNIX.
    Thanks
    Depesh

  • SAP Smartforms Font support

    Hi,
    I would like to know what fonts are supported by standard SAP in Smartforms in 4.6C and where do I look for what is supported and can we use outside Fonts and how do we use them?
    Thanks
    Ram

    Hi,
    You can create your own styles in transaction SMARTSTYLES. Then, in your smartform, you have to add the style you have created in the "output options" tab screen of the text elements.
    Regards,
    Roberto.

Maybe you are looking for