SAP SMTP requires Outlook to be configured?
Hi Everyone,
i have configured SMTP Mail in our Production Server.for that i have installed my Pop3 id in the local system's Outlook Express. the same Id has been assigned to SAP User id also,in SU01. Outbound Mail is working fine.
If i delete my Local Outlook pop3 configuration, my SAP mails are not going out.
My question is that, is it necessary to configure Pop3 id in Outlook to send SAP mails using SAP connect?
Because, we have plenty of SAP Users in our company. it is not possible to give POP3 id for all of them. even without assigning Domain Pop3 id i want all the users to send mails from SAP to Yahoo, hotmail , etc... is that possible? if so, how?
Plz clarify my doubts.Also Provide me SAP's Recommendations
Thanks&Regards,
Siva
Hi
To send mail out to all the possible ids, in SCOT
In the Mail Host and Mail Port fields, specify the mail server to which the outbound mails are to be sent (Which would be you company's mail host)
Enter the address area of the recipient addresses that are to be reached using this node. In general, * is used if all e-mails are to be sent using SMTP.
If you have done these setting, in SU01, along with the mail ids you enter for users, you should provide communication type Internet Mail.
This should solve your problem, and mails will be transmitted to all the required domains.
Regards
Rahul
Similar Messages
-
Dear All,
We are using Microsoft Exchange Online (Microsoft Hosted Solution for Exchange – Office 365) for sending and receiving emails. Now we want to setup SAP SMTP so that emails / notifications can be sending through SAP via Microsoft Exchange Online. It is quite easy to configure for setting SMTP Services for locally hosted Exchange Server. But this is the first time I am trying to setup for Microsoft Exchange Online.
Current Instance Profile settings are as follows;
is/SMTP/virt_host_1 *:25000
is/SMTP/virt_host_0 *:*
icm/server_port_2 PROT=HTTPS,PORT=44300,PROCTIMEOUT=300,TIMEOUT=600
icm/server_port_1 PROT=SMTP, PORT=1080, TIMEOUT=180
icm/server_port_0 PROT=HTTP,PORT=8000,PROCTIMEOUT=300,TIMEOUT=600
ms/server_port_0 PROT=HTTP,PORT=81$$
SCOT Settings are
Mail Host smtp.office365.com
Mail Port 587
Following are the settings for configuring Outlook for Exchange Online – Office 365;
Server name
Port
Encryption method
POP3
outlook.office365.com
995
SSL
IMAP4
outlook.office365.com
993
SSL
SMTP
smtp.office365.com
587
TLS
Please assist if any one configure office365 with SAP.Hello Majid,
Were you able to setup SCOT for Office365 online, I have to setup same.
Can you help with some guidelines on how you setup.?
Regards,
Ashish -
Error in sending mail from SAP to microsoft outlook
Hi all.
Greetings.
I have a requirement to send mail from SAP to Outlook.
SMTP is configured here....i have checked the steps.
I am using FM "SO_NEW_DOCUMENT_SEND_API1" to send the mail text.
when i check the SOST Tcode i got message "Wait for communications service".
after evry 10 minutes the sap connect all process runs..as it is configured in SCOT transaction, but even after 30 minutes the mail is not sent.
I don't know how should i check the error message?
tell me the checking stepls plz?...how should i step through in checking this?
what are the prerequsites for sending mails from SAP to Microsoft outlook?
regards
Prashant Tiwari
Edited by: prashant tiwari on Feb 6, 2009 10:26 AMHi prashant,
Pls refer to the link below:
Re: Inbound Email- SAP Connect
or
check your userid .
If not correct no mail will go from u r id.
Try it with another user id.
or try using the following function module
'SO_NEW_DOCUMENT_ATT_SEND_API1'
I Hope this helps you with the issue.
Thanks
Ravi Aswani -
Hi,
I received message like below from one of my colleague : Is there any work around for configuring the SMTP for Office 365 in ERP6 EHP6.
it is looking good now. After I checked the current situation, I
noticed, that you use office365 as a mailserver.
Sadly this is requiring an authentication method (AUTH LOGIN) which is
not supported by SAP SMTP.
We are also looking for a solution for it, but currently this
authentication is not possible.
Kind regards
Hope you will help me to configure if you are already done....
Thanks in advance...
Regards,
Mathew Vaidyan
29th April 2014So can you kindly let me know for us EHP4 (SAP_BASIS 7.01) what would be the step?
Also in few other forums i have seen with Office 360 with EHP4 configuration is not possible and in few it is possible with intermediate SMTP relay has to be installed.
I have configured and when i try to send an email(External Other domain)am getting the below error in trace log.
27.05.2014
01:37:44
SX_PERFORM_SMTPSEND
G
SMTP Plugin raises error:
27.05.2014
01:37:44
SX_PERFORM_SMTPSEND
G
Could not connect to smtp.office365.com: 25
27.05.2014
01:37:44
SO_SYNCHRON_STATUS_UPDATE
G
Message cannot be transferred to node SMTP due to connection error (final)
I have also tried with the port 587. -
Send Workitem from Sap inbox to outlook
Hi all,
Any one please explain how to send workitems in sap inbox to outlook.
What all configurations are needed?
Thanks in advanceFirst you need to be able to send an e-mail from SAP Business Workplace to your e-mail address. If that's not in place you need to configure the e-mail connector or whatever it is called. Basis people should be able to help you with that. It not only involves setting up SCOT to transmit messages with address type INT, you also need to have jobs running on your application server to pass on the SMTP messages.
Once that is working you can start thinking about e-mail notifications for workflow. If you have transaction code SWNCONFIG in your system, you should use the extended notifcations that you configure there - that is SAP's recommendation. In order to use it it seems you must have SAP Web AS running.
The other alternative (unless you are on a release < R/3 4.6C) is the report RSWUWFML2.
For assistance setting up any of these three, please post your specific questions.
In both cases you need to have a sender address defined for the user that executes the report, any user sending e-mail must have an e-mail address in the user record. -
SAP components required for implemeting SAP SRM MDM
Hi all,
Plz let me know , the SAP components required for implemeting SAP SRM MDM , for the following points:
· Internal catalogs hosted and maintained by buyer?
· Internal catalogs that are maintained by vendor (vendor will be using buyer's firewall)?
· External catalogs hosted and maintained by vendor?
Thanks and regards
HarishHi Harish,
The SAP components you would be needed are
SAP MDM5.5 or 7.1
- MDM server
- MDIS server
- MDSS server
SAP SRM5.5 or 7.0
SAP SRM-MDM business content
WAS engine typically used for deploying sca files given by SAP for configuring MDM as catalog. Mostly was engine of SRM is used in such case.
If you need an integration with backend system SAP PI will be used.
refer note
1057316 - SRM-MDM Catalog 2.0 - Installation & configuration.
refer article for understanding mdm catalog configuration steps
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10d1bde2-699f-2910-8e86-f46bfe045fdc
Regards,
Abhijeet
Edited by: abhijeet more on Apr 20, 2009 1:19 PM -
Sendmail & SAP SMTP have port conflict !
Hi SAP Gurus,
I am in process of configuring inbound & outbound Email in my ERP system. Now the problem is we have sendmail running on Port 25 on the host where SAP installed.
Because of this i can not start my SAP SMTP service on port 25. If i start on 25000 outgoing working fine but incoming not working at all.
Can we configure sendmail to listen on port 25 and forward all those mails to SAP's port 25000 ?
I dont have much knowledge of sendmail so very confused.
Any idea !!! How to resolve this ?
ThnxFolks,
I had the same problem, and the issue was that the following file in the kernel was not having the proper permissions, so you need to update permissions of icmbnd file in kernel to 4750 and owner as root.
Then you need to disable sendmail on the server on which port 25 needs to be used by SAP.
Use the command "./sendmail stop" to disable sendmail (cd /etc/rc.d)
Finally try to activate SMTP through smicm tcode.
It worked for me.
thanks! -
Exchange 2010 route email to SAP smtp server
Hi,
we have a Exchange2010 infrastructure, i need to route email received to a specific address: [email protected], to a SAP smtp server: serverip:25000
How can i obtain this?
Thanks in advanceHi,
Please review note 455140.
Settings on the mail server (SAP-external configuration)
To be able to receive mails in the SAP system, you need to set your mail server so that certain mail addresses are forwarded to one or several SAP systems or clients. For this purpose, you need to define routing rules that assign a mail host and/or port to address areas (generic address parts, usually the domain), for example:
*@crm-prod.company.com --> SAPWASHost:25000
*@crm-test.company.com --> SAPWASHost:25001
For more information about the exact setting procedure, see the mail server documentation.
Thank you.
Best regards,
Ciarán -
Sending mail from sap Inbox to outlook
Hi All,
Iam new to SAP workflow. Here I need to send the mail from SAP Inbox to Outlook for high priority keeping red flag as icon.
can anyone tell me how to set up this and go ahead to start.
Thanks
KumarIF I understand you correctly, you want to send a mail to Outlook (external email address) as a step in Workflow.
If you are on Release 6.20 or above the following solution will work. I do not remember what is available in earlier releases.
1) Define a multiline element based on SOXNA-FULLNAME to hold the email addresses. How you populate this element with the addresses depends on your requirements.
2) Insert a Send Mail step in the workflow.
3) In the Mail Tab, Select 'U' as Recipient Type.
Assign the Multi Line element defined in Step 1 to E-Mail Address.
4) Define the Subject and the body as needed.
Please note that you should have External mail sending from SAP enabled and a batch job that runs periodically to push the mail.
Cheers,
Ramki Maley. -
Send mail to sap office and outlook at same time
Hi guru,
Is it possible to send a mail from workflow to sap office and outlook at the same time?
Thanks in advance
RegardsNo you can do with one.
You have to do this configuration.
Go to SO16-> Mail Sy Grp->Select Send to home addresses of users
Use
The messages that are sent to users in this SAP System are forwarded to the users' home addresses. The home address of a user can be the Internet address of their mailbox in an external mail system (for example, Microsoft Outlook or Lotus Notes).
Dependencies
The home address of each user is specified in the address management for every communication method used. In the case of a mail system group, only the home address that is specified for the standard communication method of a user is of importance. The messages are forwarded to this address.
You have to reset the address buffer on the tab page Adressing in order for address changes to become effective directly.
Thanks
Arghadip -
How to Create a SAP R/3 system in system configuration
Hi,
i am new to EP Any body tell me how to Create a SAP R/3 system in system configuration.Thanks in advance.
Thanks
kiran.BHi Kiran,
To create SAP R3 System follows this steps :
in system landscape
(1)create new system
(2)select SAP system using dedicated application server
(3)give system name and id
(4)finish
(5)open system and set following properties
Connector
- App. Host : r3 server name
- Gateway Host :
- SAP client :
- SAP System Name:
- SAP System No. :
- Server Port : 3200 (Default)
- System Type
- give system Alias
User Management
- Logon Method
UIDPW -
The administrator has made changes that requires Outlook to be restarted.
We are running on premise Exchange 2013 (Upgraded from Exchange 2010). Our Outlook anywhere clients (Me being one of them) are constantly getting this pop up, some more then others.
"The administrator has made changes that requires Outlook to be restarted."
I have looked around and there are a lot of references to corrupt OST files and recently mailbox moves. My mailbox has been moved for several months now, and I am not using cached mode, however I do have a 16MB OST file on this particular computer
(I get this message on the 3 computers I use regularly, all of them do not have cache mode)
We only seem to get this message on Outlook 2013, I have downgraded a computer to 2010 and I do not get the message. I believe that we started getting this message shortly after we removed the Exchange 2010 server from our organization, however I cannot
be certain
any thoughts?? I get the message at least every 30-60 minutes :)Hello,
Normally, if you move a mailbox, the profile has to get updated somehow, and outlook is updated automatically, but it does require a restart.
I recommend you follow the NetoMeter's suggestion to check the result.
If you have any feedback on our support, please click here
Cara Chen
TechNet Community Support -
when I click on my iCloud panel, Calendars, I get an error message that says, Setup can't continue because Outlook isn't configured t have a default profile. Check you Outlook settings and try again." How do I set up these settings in Outlook 2007
Here are two threads you may want to review. I'm sure there are others. Good luck!
https://discussions.apple.com/thread/3427840?start=0&tstart=0
http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-calendar/ -
Is SAP net weaver environment necessary to configure/customize IC Webclient
Hello Expert,
Is SAP net weaver environment necessary to configure/customize IC Web client and Internet sales?
Please guide me.
Thanks & Regards
SatishSingle Sign On is optional.
What would happen is that the user that's using the Web Application Designer will have to have access to Portals, and the portal Sign On screen will appear once that user executes a Web Template.
It also depends on the Portal Strategy and the Security Strategy of your client. For example, the portal may only grant access to those used IDs in the Active Directory, so if your BEx WAD user is not defined in Active Directory that user will not have access to portals, and will not be able to execute the Web Template.
Cheers. -
i am trying to sync outlook 2013 with icloud and am receiving this error - Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again - can anyone help me out
Here are two threads you may want to review. I'm sure there are others. Good luck!
https://discussions.apple.com/thread/3427840?start=0&tstart=0
http://www.slipstick.com/outlook/icloud-outlook-problems-syncing-calendar/
Maybe you are looking for
-
Wacom Tablet Mapping Bug Only in Photoshop
I am using a Graphire Wireless Wacom Tablet on a Windows 7 PC at work. I installed the most recent drivers, and it works flawlessly in a duel monitor setup, and I have no trouble mapping it however I would like. This is all great until I launch Adobe
-
HP Officejet 4500 driver not installing HP Solution Center fully-so can't scan
New laptop w/ Windows 8....Have installed the right driver...but the driver isn't downloading the HP Solution Center suite, so I can't instruct the HP Officejet 4500 to scan. Printer is communicating w/ laptop. I don't use the online fax options,
-
Lines appear around transparent objects!
Hello, I think my previous post on this topic was lost somewhere in the adobe forums machine, so please excuse my repost. I've noticed that exporting layouts from InDesign CS3 that contain transparent graphics causes the resulting PDF to show DARK LI
-
Search IViews in the detailed navigation and display history data too
hi all we have a req. that we will put an input box and a search button in the detailed navigation pane of the portal. the user need to put the transaction code and the corrosponding iview opens up in the content area. we first needed the way to be a
-
Flash crashed and now operates without layouts????
I was working on a project, copying and pasting a large amount of frames and objects when Flash CS4 would not let me save, the message was something like "cannot save due to an unknown error" so I closed it and opened again, and the following error p