SAP Solid Works Set-Up Guide
Could someone kindly pass me the SET-UP guide for SAP-Solid Works Integration.
Thx,
Sachin
Windows 7 is not supported as operating system, you need to use a server version.
Markus
Similar Messages
-
Got new ATV and all set up. It keeps loosing connection with iTunes on laptop and have tried everything suggested in set up guide. It works fine for a while then the iTunes account vanishes from 'computer' menu TV screen. Full Wifi signal on both devices so can't think what could be causing it to happen. Any suggestions please?
Sorry, I updated another thread I was a part of but didn't update my own thread.....ughhh!
I updated all of my ATV 2's and 3's to the latest firmware when it was released and have been problem free since. I do believe the major issue of not being able to connect after a period of inactivity has been corrected with the latest ATV firmware.
I can look at my network connection table using "netstat -an" in a CMD window and I do not see the massive number of connections I saw before the update.
Here is a link to the other thread I was referring to above:
https://discussions.apple.com/message/19952545#19952545
Have you applied the latest firmware updates to your ATV 3's? -
How to Integrate SAP with Solid works?
Hello Experts,
My customer is asking to do some research on integrating SAP with Solid works. I don't have any Prior experience on this. Can any one give me some inputs on below questions
1) How to Design the interface between SAP and Solid works?.
2) Is it better to Design our own Interface or better to Buy some third party tools?.
3) Please give me some best Third Party tools for this purpose?.
Thanks a lot in advance...
Regards,
Mohan.Hi,
...or Option 4, use the SAP - SolidWorks Integration. At the service marketplace at http://service.sap.com/plm or directly at http://service.sap.com/~sapidb/011000358700003638082001E/GEDAS_SOLIDWORKS.htm you can find more information about this SAP product.
Best regards,
Martin -
Worked on the SAP-Script layout sets in MM modules.
sir,
Like to know How would Worked on the SAP-Script layout sets in MM modules.Hi,
First of all what are we trying to achieve?
I understand that changes where made to standard SAP SAPscript RVINVOICE01 and you where asked to make further changes.
In SAP configuration you need to see what is the driver program for your SAPscript and what is the SAPscript name (transaction VOK2->Output->Processing Programs->Billing Documents) or via table TNAPR.
This will allow you to see what is the driver program for your SAPscripr (this is the program that prepares data to be formatted by your SAPscript layour set).
Once data is derived by an ABAP program, a sapscript is called from driver ABAP to print this data.
You may need to make changes to driver ABAP (in case changes to data are required) or to SAPscript if changes to layout and window positioning are requested.
Try not to modify standard SAP programs (copy to Z versions)...
Hope it is of some help...
Michael -
Work on the SAP-Script layout sets in SD modules
Hi,
How to Work on the SAP-Script layout sets in SD modules. The documents modified were RVINVOICE01 as per the clients requirements.Hi,
First of all what are we trying to achieve?
I understand that changes where made to standard SAP SAPscript RVINVOICE01 and you where asked to make further changes.
In SAP configuration you need to see what is the driver program for your SAPscript and what is the SAPscript name (transaction VOK2->Output->Processing Programs->Billing Documents) or via table TNAPR.
This will allow you to see what is the driver program for your SAPscripr (this is the program that prepares data to be formatted by your SAPscript layour set).
Once data is derived by an ABAP program, a sapscript is called from driver ABAP to print this data.
You may need to make changes to driver ABAP (in case changes to data are required) or to SAPscript if changes to layout and window positioning are requested.
Try not to modify standard SAP programs (copy to Z versions)...
Hope it is of some help...
Michael -
Do you trust the SAP standard rule set ?
Hello all,
I have the impression that, too often, the SAP standard ruleset has been taken for granted : upload, generate and use. Here is a post as to why not to do so. Hopefuly, this will generate a interesting discussion.
As I have previously stated in other threads, you should be very careful accepting the SAP standard rule set without reviewing it first. Before accepting it, you should ensure that your specific SAP environment has been reflected in the functions. The 2 following questions deal with this topic :
1. what is your SAP release ? ---> 46C is different than ECC 6.0 in terms of permissions to be included in the function permission tab. With every SAP release, new authorization objects are linked to SAP standard tcodes. Subsequently some AUTHORITY-CHECK statements have been adapted in the ABAP behind the transaction code. So, other authorizations need to provided from an implementation point of view (PFCG). And thus, from an audit perspective (GRC-CC), other settings are due when filtering users' access rights in search for who can do what in SAP.
2. what are your customizing settings and master data settings ? --> depending on these answers you will have to (de)activate certain permissions in your functions. Eg. are authorization groups for posting periods, business areas, material types, ... being used ? If this is not required in the SAP system and if activated in SAP GRC function, then you filter down your results too hard, thereby leaving certain users out of the audit report while in reality they can actually execute the corresponding SAP functionality --> risk for false negatives !
Do not forget that the SAP standard ruleset is only an import of SU24 settings of - probably - a Walldorf system. That's the reason SAP states that the delivered rule set is a starting point.
So, the best practice is :
a. collect SAP specific settings per connector in a separate 'questionnaire' document, preferably structured in a database
b. reflect these answers per function per connector per action per permission by correctly (de)activating the corresponding permissions for all affected functions
You can imagine that this is a time-consuming process due to the amount of work and the slow interaction with the Java web-based GRC GUI. Therefore, it is a quite cumbersome and at times error-prone activity ...... That is, in case you would decide to implement your questionnaire answers manually. There are of course software providers on the market that can develop and maintain your functions in an off-line application and generate your rule set so that you can upload it directly in SAP GRC. In this example such software providers are particularly interesting, because your questionnaire answers are structurally stored and reflected in the functions. Any change now or in the future can be mass-reflected in all (hundreds / thousands of) corresponding permissions in the functions. Time-saving and consistent !
Is this questionnaire really necessary ? Can't I just activate all permissions in every function ? Certainly not, because that would - and here is the main problem - filter too much users out of your audit results because the filter is too stringent. This practice would lead too false negatives, something that auditors do not like.
Can't I just update all my functions based on my particular SU24 settings ? (by the way, if you don't know what SU24 settings are, than ask your role administrator. He/she should know. ) Yes, if you think they are on target, yes you can by deleting all VIRSA_CC_FUNCPRM entries from the Rules.txt export of the SAP standard rule set, re-upload, go for every function into change mode so that the new permissions are imported based on your SU24 settings. Also, very cumbersome and with the absolute condition that you SU24 are maintained excellent.
Why is that so important ? Imagine F_BKPF_GSB the auth object to check on auth groups on business areas within accounting documents. Most role administrator will leave this object on Check/Maintain in the SU24 settings. This means that the object will be imported in the role when - for example - FB01 has been added in the menu. But the role administrator inactivates the object in the role. Still no problem, because user doesn't need it, since auth groups on business areas are not being used. However, having this SU24 will result in an activated F_BKPF_GSB permission in your GRC function. So, SAP GRC will filter down on those users who have F_BKPF_GSB, which will lead to false negatives.
Haven't you noticed that SAP has deactivated quite a lot of permissions, including F_BKPF_GSB ? Now, you see why. But they go too far at times and even incorrect. Example : go ahead and look deeper into function AP02. There, you will see for FB01 that two permissions have been activated. F_BKPF_BEK and F_BKPF_KOA. The very basic authorizations needed to be able to post FI document are F_BKPF_BUK and F_BKPF_KOA. That's F_BKPF_BUK .... not F_BKPF_BEK. They have made a mistake here. F_BKPF_BEK is an optional auth object (as with F_BKPF_GSB) to check on vendor account auth groups.
Again, the message is : be very critical when looking at the SAP standard rule set. So, test thoroughly. And if your not sure, leave the job to a specialized firm.
Success !
SamSam and everyone,
Sam brings up some good points on the delivered ruleset. Please keep in mind; however, that SAP has always stated that the delivered ruleset is a starting point. This is brought up in sap note 986996 Best Practice for SAP CC Rules and Risks. I completely agree with him that no company should just use the supplied rules without doing a full evaluation of their risk and control environment.
I'll try to address each area that Sam brings up:
1. Regarding the issue with differences of auth objects between versions, the SAP delivered rulset is not meant to be version specific. We therefore provide rules with the lowest common denominator when it comes to auth object settings.
The rules were created on a 4.6c system, with the exception of transactions that only exist in higher versions.
The underlying assumption is that we want to ensure the rules do not have any false negatives. This means that we purposely activate the fewest auth objects required in order to execute the transaction.
If new or different auth object settings come into play in the higher releases and you feel this results in false positives (conflicts that show that don't really exist), then you can adjust the rules to add these auth objects to the rules.
Again, our assumption is that the delivered ruleset should err on the side of showing too many conflicts which can be further filtered by the customer, versus excluding users that should be reported.
2. For the customizing settings, as per above, we strive to deliver rules that are base level rules that are applicable for everyone. This is why we deliver only the core auth objects in our rules and not all. A example is ME21N.
If you look at SU24 in an ECC6 system, ME21N has 4 auth objects set as check/maintain. However, in the rules we only enable one of the object, M_BEST_BSA. This is to prevent false negatives.
3. Sam is absolutely right that the delivered auth object settings for FB01 have a mistake. The correct auth object should be F_BKPF_BUK and not F_BKPF_BEK. This was a manual error on my part. I've added this to a listing to correct in future versions of the rules.
4. Since late 2006, 4 updates have been made to the rules to correct known issues as well as expand the ruleset as needed. See the sap notes below as well as posting Compliance Calibrator - Q2 2008 Rule Update from July 22.
1083611 Compliance Calibrator Rule Update Q3 2007
1061380 Compliance Calibrator Rule Update Q2 2006
1035070 Compliance Calibrator Rule Update Q1 2007
1173980 Risk Analysis and Remediation Rule Update Q2 2008
5. SAP is constantly working to improve our rulesets as we know there are areas where the rules can be improved. See my earlier post called Request for participants for an Access Control Rule mini-council from January 28, 2008. A rule mini-council is in place and I welcome anyone who is interested in joining to contact me at the information provided in that post.
6. Finally, the document on the BPX location below has a good overview of how companies should review the rules and customize them to their control and risk environment:
https://www.sdn.sap.com/irj/sdn/bpx-grc
Under Key Topics - Access Control; choose document below:
o GRC Access Control - Access Risk Management Guide (PDF 268 KB)
The access risk management guide helps you set up and implement risk
identification and remediation with GRC Access Control. -
How to set a Guide at the start of a shape?
hello: Level: Newbie-intermediate OS: Win 7 Ps. Cs6
i have been searching for the answer to this question but i think that maybe i don't know how to ask it properly in the FAQ's or manual search box and so i've come here for help.
hopefully i can do better at asking it here.
when using View > New Guide ... can i get the Guide to place itself up against a Shape in the center of the Canvas (or where ever the shape is located), without knowing the Position to set the Guide at?
i thought that maybe Selecting the Shape would work but as you probably already know ... it didn't
am i way off and just hoping for something that doesn't exist?
thanx so much for your time!!Hi JJ,
sorry, but i guess i'm a bit slow on the reuptake lately.
also, i'm asking my question in the wrong way. my not understanding is totally my doing.
i don't really understand what ticking the options under 'Snap to' does. it seems rather they are ticked or not that i still must enter the Position for the Guide.
i think this is what i've been trying to get at ... is there a way to "tell" the Guide tool that i want a Guide ... say, 10px in from the start/edge of the shape?
and rather then Position 0 being at the edge of the canvas can it be set so that it'll "think" Position 0 is at the start of a Shape instead?
so, rather than knowing that the Shape is ... say, 80px in from the left and so having to then set the 1st Guide to 80px and then the next to 90px.
i think if there is a way that it could cut down on my having to measure so much to properly place guides.
i hope this helps you to help me. and hey, most of all thank you so much for hanging in there with me & for trying to help. i really appreciate it. -
While starting the SAP, Disp+Work.exe is getting stopped
Hi All,
SAP Discovery System has been installed. While starting the SAP, Disp+Work.exe is getting stopped. But I checked MaxDB and it is working fine.
Kindly look into the below log dev_disp and advice me the solution.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 10
sid ERP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 119
intno 20050900
make: multithreaded, Unicode, optimized
pid 2420
Mon Sep 15 20:16:06 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (10 2420) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 119 successfully loaded
shared lib "dw_xtc.dll" version 119 successfully loaded
shared lib "dw_stl.dll" version 119 successfully loaded
shared lib "dw_gui.dll" version 119 successfully loaded
shared lib "dw_mdm.dll" version 119 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3910
Mon Sep 15 20:16:11 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >ORX-SAPDEMO_ERP_10 <
DpShMCreate: sizeof(wp_adm) 17232 (1436)
DpShMCreate: sizeof(tm_adm) 4270848 (21248)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1544)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06E70040, size: 4929464)
DpShMCreate: allocated sys_adm at 06E70040
DpShMCreate: allocated wp_adm at 06E72090
DpShMCreate: allocated tm_adm_list at 06E763E0
DpShMCreate: allocated tm_adm at 06E76410
DpShMCreate: allocated wp_ca_adm at 07288F10
DpShMCreate: allocated appc_ca_adm at 0728ECD0
DpShMCreate: allocated comm_adm at 07290C10
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07311AD0
DpShMCreate: allocated gw_adm at 07311B10
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 07311B40
DpShMCreate: allocated wall_adm at 07311B48
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 2672
argv[0] = D:\usr\sap\ERP\DVEBMGS10\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ERP\DVEBMGS10\exe\jcontrol.EXE
argv[2] = pf=
iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=3500
argv[5] = -DSAPSYSTEM=10
argv[6] = -DSAPSYSTEMNAME=ERP
argv[7] = -DSAPMYNAME=ORX-SAPDEMO_ERP_10
argv[8] = -DSAPPROFILE=
iwdfvm2160\sapmnt\ERP\SYS\profile\ERP_DVEBMGS10_iwdfvm2160
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1629]
***LOG Q0K=> DpMsAttach, mscon ( iwdfvm2160) [dpxxdisp.c 11799]
DpStartStopMsg: send start message (myname is >ORX-SAPDEMO_ERP_10 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
Mon Sep 15 20:16:12 2008
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 119
Release check o.K.
DpJ2eeLogin: j2ee state = CONNECTED
Mon Sep 15 20:16:15 2008
***LOG Q0I=> NiIRead: recv (10054: WSAECONNRESET: Connection reset by peer) [nixxi.cpp 4248]
ERROR => NiIRead: SiRecv failed for hdl 4 / sock 1428
(SI_ECONN_BROKEN/10054; I4; ST; 127.0.0.1:3504) [nixxi.cpp 4248]
DpJ2eeMsgProcess: j2ee state = CONNECTED (NIECONN_BROKEN)
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2672)
ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
Mon Sep 15 20:16:51 2008
ERROR => DpHdlDeadWp: W0 (pid 4952) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W1 (pid 4852) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W2 (pid 5976) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W3 (pid 5000) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W4 (pid 4984) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => DpHdlDeadWp: W5 (pid 1272) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => DpHdlDeadWp: W6 (pid 528) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W7 (pid 5720) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => DpHdlDeadWp: W8 (pid 2648) died [dpxxdisp.c 14507]
ERROR => DpHdlDeadWp: W9 (pid 5444) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => DpHdlDeadWp: W10 (pid 5032) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => DpHdlDeadWp: W11 (pid 5620) died [dpxxdisp.c 14507]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:01 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Sep 16 03:17:01 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4952 Ended no 1 0 0
1 DIA 4852 Ended no 1 0 0
2 DIA 5976 Ended no 1 0 0
3 DIA 5000 Ended no 1 0 0
4 DIA 4984 Ended no 1 0 0
5 UPD 1272 Ended no 1 0 0
6 ENQ 528 Ended no 1 0 0
7 ENQ 5720 Ended no 1 0 0
8 BTC 2648 Ended no 1 0 0
9 BTC 5444 Ended no 1 0 0
10 SPO 5032 Ended no 1 0 0
11 UP2 5620 Ended no 1 0 0
Dispatcher Queue Statistics Tue Sep 16 03:17:01 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
2
2000
6
6
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 7 ( 87%), shm 1 ( 12%)
since last update total 8, udp 7 ( 87%), shm 1 ( 12%)
Dump of tm_adm structure: Tue Sep 16 03:17:01 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Sep 16 03:17:01 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:06 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >ORX-SAPDEMO_ERP_10 < (normal)
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (1516) (SOFT_KILL)
Stop icman
killing process (1256) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:1516 HANDLE:1520)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:07 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1516 HANDLE:1520)
wait for end of icman
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:08 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:09 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:10 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:11 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:12 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:13 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:14 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:15 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:16 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:17 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:1256 HANDLE:1528)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1549
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Sep 15 20:17:18 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:1256 HANDLE:1528)
[DpProcDied] Process died (PID:2672 HANDLE:1504)
DpStartStopMsg: send stop message (myname is >ORX-SAPDEMO_ERP_10 <)
NiIMyHostName: hostname = 'ORX-SAPDEMO'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Mon Sep 15 20:17:19 2008
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 12145]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1508 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1508 (pos=3)
SiSelNRemove: removed sock 1508
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/12
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1508
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2420) [dpxxdisp.c 10417]
Good Bye .....
Thanks in advance.
Regards,
SuneethaHi,
Just check out your filesystem/ directory have sufficient space.
Do paste us dev_rd as the error above " NiIRead: SiRecv failed for "
pasted looks like system uanble to access SAP gateway.
Rgds
Radhakrishna D S -
Sap disp+work .exe stopped in mmc
Hello Experts ,
sap disp+work .exe stopped .... please help me how to solve this issue....
sap netweaver 7.0 /oracle 10g/win 2003 32 bit
i will provide dev_disp log
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid SAG
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 3312
Thu Apr 03 10:28:49 2014
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
*** SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 3312) [dpxxdisp.c 1237]
Thu Apr 03 10:28:50 2014
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Apr 03 10:28:55 2014
*** WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >jagadesh_SAG_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 08160040, size: 4653368)
DpShMCreate: allocated sys_adm at 08160040
DpShMCreate: allocated wp_adm at 08161E40
DpShMCreate: allocated tm_adm_list at 081665C0
DpShMCreate: allocated tm_adm at 081665F0
DpShMCreate: allocated wp_ca_adm at 08535890
DpShMCreate: allocated appc_ca_adm at 0853B650
DpShMCreate: allocated comm_adm at 0853D590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 085BE450
DpShMCreate: allocated gw_adm at 085BE490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 085BE4C0
DpShMCreate: allocated wall_adm at 085BE4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Thu Apr 03 10:28:56 2014
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 4484
argv[0] = D:\usr\sap\SAG\DVEBMGS00\exe\jcontrol.EXE
argv[1] = D:\usr\sap\SAG\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\SAG\SYS\profile\SAG_DVEBMGS00_jagadesh
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1433
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=SAG
argv[7] = -DSAPMYNAME=jagadesh_SAG_00
argv[8] = -DSAPPROFILE=D:\usr\sap\SAG\SYS\profile\SAG_DVEBMGS00_jagadesh
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
Thu Apr 03 10:28:57 2014
***LOG Q0K=> DpMsAttach, mscon ( jagadesh) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >jagadesh_SAG_00 <)
DpStartStopMsg: start msg sent
Thu Apr 03 10:29:00 2014
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Thu Apr 03 10:29:03 2014
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Thu Apr 03 10:29:39 2014
*** ERROR => W0 (pid 4500) died [dpxxdisp.c 14241]
*** ERROR => W1 (pid 4508) died [dpxxdisp.c 14241]
*** ERROR => W2 (pid 4516) died [dpxxdisp.c 14241]
*** ERROR => W3 (pid 4524) died [dpxxdisp.c 14241]
*** ERROR => W4 (pid 4532) died [dpxxdisp.c 14241]
*** ERROR => W5 (pid 4540) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
*** ERROR => W6 (pid 4548) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
*** ERROR => W7 (pid 4560) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
*** ERROR => W8 (pid 4568) died [dpxxdisp.c 14241]
*** ERROR => W9 (pid 4588) died [dpxxdisp.c 14241]
*** ERROR => W10 (pid 4596) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
*** ERROR => W11 (pid 4604) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
*** ERROR => W12 (pid 4620) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
*** DP_FATAL_ERROR => DpWPCheck: no more work processes
*** DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:49 2014
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Apr 03 04:59:49 2014
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4500 Ended no 1 0 0
1 DIA 4508 Ended no 1 0 0
2 DIA 4516 Ended no 1 0 0
3 DIA 4524 Ended no 1 0 0
4 DIA 4532 Ended no 1 0 0
5 DIA 4540 Ended no 1 0 0
6 UPD 4548 Ended no 1 0 0
7 ENQ 4560 Ended no 1 0 0
8 BTC 4568 Ended no 1 0 0
9 BTC 4588 Ended no 1 0 0
10 BTC 4596 Ended no 1 0 0
11 SPO 4604 Ended no 1 0 0
12 UP2 4620 Ended no 1 0 0
Dispatcher Queue Statistics Thu Apr 03 04:59:49 2014
===========================
+------+--------+--------+--------+--------+--------+
| Typ | now | high | max | writes | reads |
+------+--------+--------+--------+--------+--------+
| NOWP | 0 | 2 | 2000 | 5 | 5 |
+------+--------+--------+--------+--------+--------+
| DIA | 5 | 5 | 2000 | 5 | 0 |
+------+--------+--------+--------+--------+--------+
| UPD | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| ENQ | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| BTC | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| SPO | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
| UP2 | 0 | 0 | 2000 | 0 | 0 |
+------+--------+--------+--------+--------+--------+
max_rq_id 12
wake_evt_udp_now 0
wake events total 8, udp 5 ( 62%), shm 3 ( 37%)
since last update total 8, udp 5 ( 62%), shm 3 ( 37%)
Dump of tm_adm structure: Thu Apr 03 04:59:49 2014
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Thu Apr 03 04:59:49 2014
=============================
Slots: 300, Used: 1, Max: 0
+------+--------------+----------+-------------+
| id | owner | pid | eyecatcher |
+------+--------------+----------+-------------+
| 0 | DISPATCHER | -1 | *WPCAAD000* |
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:54 2014
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >jagadesh_SAG_00 < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=4484)
killing process (4484) (SOFT_KILL)
*** ERROR => DpProcKill: kill failed [dpntdisp.c 371]
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1432 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1432 (pos=2)
SiSelNRemove: removed sock 1432
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 1432
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (4468) (SOFT_KILL)
Stop icman
killing process (4476) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:4468 HANDLE:1528)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:55 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4468 HANDLE:1528)
wait for end of icman
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:56 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:57 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:58 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:29:59 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:00 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:01 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:02 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:03 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:04 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:05 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process lives (PID:4476 HANDLE:1532)
waiting for termination of icman ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1557
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Apr 03 10:30:06 2014
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:4476 HANDLE:1532)
[DpProcDied] Process died (PID:4484 HANDLE:1512)
DpStartStopMsg: send stop message (myname is >jagadesh_SAG_00 <)
NiIMyHostName: hostname = 'jagadesh'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 189 bytes
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=562,pac=1,MESG_IO)
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
DpStartStopMsg: stop msg sent
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
DpHalt: received 4 bytes from message server
NiIRead: hdl 3 received data (rcd=274,pac=1,MESG_IO)
NiBufIIn: NIBUF len=274
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 274 bytes
MSG received, len 110+164, flag 1, from MSG_SERVER , typ 0, key -
DpHalt: received 164 bytes from message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIRead: read for hdl 3 timed out (0ms)
DpHalt: no more messages from the message server
DpHalt: send keepalive to synchronize with the message server
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=114,pac=1,MESG_IO)
MsINiWrite: sent 114 bytes
send msg (len 110+4) to name MSG_SERVER, type 0, key -
MsSndName: MS_NOOP ok
Send 4 bytes to MSG_SERVER
NiIRead: hdl 3 recv would block (errno=EAGAIN)
NiIPeek: peek successful for hdl 3 (r)
NiIRead: hdl 3 received data (rcd=114,pac=1,MESG_IO)
NiBufIIn: NIBUF len=114
NiBufIIn: packet complete for hdl 3
NiBufReceive starting
MsINiRead: received 114 bytes
MSG received, len 110+4, flag 3, from MSG_SERVER , typ 0, key -
Received 4 bytes from MSG_SERVER
Received opcode MS_NOOP from msg_server, reply MSOP_OK
MsOpReceive: ok
MsSendKeepalive : keepalive sent to message server
NiIRead: hdl 3 recv would block (errno=EAGAIN)
Thu Apr 03 10:30:07 2014
NiIPeek: peek for hdl 3 timed out (r; 1000ms)
NiIRead: read for hdl 3 timed out (1000ms)
DpHalt: no more messages from the message server
DpHalt: sync with message server o.k.
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 11899]
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1456 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1456 (pos=3)
SiSelNRemove: removed sock 1456
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 15)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1456
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 3312) [dpxxdisp.c 10259]
Good Bye .....
Regards
jagadesh varmaHi
Gaurav rana,
Thank u for quick reply rana,,,
i will provide host file
opyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
192.168.1.1 jagadesh
regards
sagi -
3D Picture Control Using Solid Works VRML File and Moving Individual Components
Hi, i am new to these forums and am looking for help concerning 3d picture control, i am a undergraduate student doing a second year project to control a 4DoF UAV.
I'm trying to sort out the 3d simulation of it, i have made the solid works drawings and assembly then exported that to a single WRL file (in the correct format ie. ver. 97) however when trying to import that to Labview i am having difficulty setting the relationships so different parts rotate etc. in the assembly.
i'll attach the corresponding example vi from labview and my solid work files.
Any help is very much appreciated
Thanks
Tom
Attachments:
CDEx Draw Helicopter 3D Model.vi 21 KB
WRL and solid work files.zip 4235 KBhi again,
i've tried your suggestion with the naming however, i am using seperate VRML files for the different components and using the main vrml file to control the prent-child relationship etc. however when trying to access that file through labview it can't open it. this is the code within the vrml file
#VRML V2.0 utf8
DEF assembly Transform {
Children [
Inline {
url [" Bottom Base.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Revolve Transform {
Children [
Inline {
url [" Top Base.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Elevation Transform {
Children [
Inline {
url [" Arm Pivot.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Connector Transform {
Children [
Inline {
url [" Rod-Base Connector.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Rod Transform {
Children [
Inline {
url [" Rod.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Roll Transform {
Children [
Inline {
url [" Mount Connector.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Pitch Transform {
Children [
Inline {
url [" Mount Pivot.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Mount Transform {
Inline {
url [" Arm Mount.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Chassis Transform {
Inline {
url [" Chassis.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Gearhead1 Transform {
Inline {
url [" i_gearhead.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Gearhead2 Transform {
Inline {
url [" i_gearhead-1.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Gearhead3 Transform {
Inline {
url [" i_gearhead-2.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Gearhead4 Transform {
Inline {
url [" i_gearhead-3.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Shaft1 Transform {
Inline {
url [" i_shaft.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Shaft2 Transform {
Inline {
url [" i_shaft-1.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Shaft2 Transform {
Inline {
url [" i_shaft-2.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Shaft3 Transform {
Inline {
url [" i_shaft-3.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Prop1 Transform {
Inline {
url [" Propeller.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Prop2 Transform {
Inline {
url [" Propeller-1.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Prop3 Transform {
Inline {
url [" Propeller-2.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Prop4 Transform {
Inline {
url [" Propeller-3.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Shell Transform {
Inline {
url [" Shell.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000
DEF Dome Transform {
Inline {
url [" Dome.wrl "]
bboxSize -1.000000 -1.000000 -1.000000
bboxCenter 0.000000 0.000000 0.000000 -
File system /usr/sap/hostctrl/work getting full rapidly
Dears,
Recently We have installed PI 7.1 on AIX 6.1 and database is Oracle 10g.
Everything is working fine but we are facing one strange issue with it.
Our file system /usr/sap/hostctrl/work is getting full again and again,I checked that there is a file dev_saphostexec that is taking maximum space,At present its of 15 GB.
So please suggest how to solve this problem.
ShivamDear Mark,
I have read OSS Note SAP Note 1031096 - Installing Package SAPHOSTAGENT.
We are starting this week installing "Diagnostics Agent 711" on all SAP Netweaver 7.00 mananged system.
I have read the "Diagnostics Agent 7.11- Setup Guide".
In the "Installation Process", there is a step concerning the "Install the SAP Host Agent - Page 9".
I have read the "Installation_SAPHOSTAGENT.pdf" guide.
In the first page of this guide, it is written :
"You only need to download and install the host agent in the following cases :
- You want to centrally monitor a host that does not have an SAP component"
- You want to perform an upgrade to the SAP NetWeaver 7.1 for an SAP NetWeaver component".
In our productive envronment, we do have 2 clusters :
Cluster 01 is composed of 2 nodes.
Only "Databases" and "Central Services" of 5 SAP Systems are running.
There is no CI or SA
Cluster 02 is composed of 6 nodes.
Only CI and AS of 5 productive systems are running on theses 6 nodes.
My question :
Do we have to install a SAP HOST AGENT in nodes of cluster 01 ?
As written in "Downloading and Installating Package SAPHOSTAGENT" guide,
SAP HOST AGENT only need to be install on "host that does not have an SAP component".
Can we consider that "database" and "Central Service" are SAP Component or not ?
Thanks in advance for your feedback
Best regards
P. Cuennet -
GP Design Time work set is missing in my portal
Hi,
I'm missing GP design time work set in my portal , how should i get it ,any body help me.
santhoshHi,
Assign the 'GP Business Expert' role to the user to see the Design time workset.
The name of the role is 'com.sap.caf.eu.gp.roles.designtime'
Regards,
Sharadha -
Catalog Procurement through SAP PM work orders.
Hi All,
We have activated the catalog link for procuring the external material in work orders.
Now as a part of configuration we have to put the plant- work order combination in it.
Like Plant and Control Key ( PM01, PM02, PM03, PM07, PM09)
Could you pls tell which control key I I should use for procuring external material from vendor through catalog.
Many Thanks in AdvanceSanjay,
We are planning to do catalog procurement through SAP PM work orders. We are currently on ECC 5.0 and wil be upgrading to 6.4 in Dec 2010. Do we need to have SRM for setting up catalog?
Appreciate you reply.
Thanks
Suresh -
Suggestions - Vertical Ruler or the ability to set horizontail guides for various view ports.
The suggestion link seems to be broken so I am posting here in hopes someone will see it. Edge Reflow would benefit greatly from the addition of a vertical ruler. Unless this is a view aready that I am somehow missing. Also it would be cool to be able to set a horizontal guides in the canvas grid (DOM). This would help in allowing the user set a guide for multiple viewing areas.
And the pie in the sky, Santa Claus Christmas list of all request would be the ability to "blend" break points. It would be cool to set a 2000px view and a bookend break-point at 1024px, work both compositions to the desired look and have a "blend tool" that scales all the elements to the desired look form 2000px to 1024px.Hi Bobby, thanks for the suggestions!
-
I
Commit work sets sy-subrc always to zero.
In this case how can we know if commit work fails.
Please provide more details and efficient usage of commit statements in a reportHi,
Usage of commit statements is as follows:
COMMIT WORK.
Addition
u2026 AND WAIT
Effect
Executes a database commit and thus closes a logical processing unit or Logical Unit of Work ( LUW ) (see also Transaction processing ). This means that
all database changes are made irrevocable and cannot be reversed with ROLLBACK WORK and
all database locks are released.
COMMIT WORK also
calls the subroutines specified by PERFORM u2026 ON COMMIT ,
executes asynchronously any update requests (see CALL FUNCTION u2026 IN UPDATE TASK ) specified in these subroutines or started just before,
processes the function modules specified in CALL FUNCTION u2026 IN BACKGROUND TASK ,
cancels all existing locks (see SAP locking concept ) if no update requests exist,
closes all open database cursors (see OPEN CURSOR ) and
resets the time slice counter to 0.
COMMIT WORK belongs to the Open SQL command set.
Return code value
The SY-SUBRC is set to 0.
Notes
All subroutines called with PERFORM u2026 ON COMMIT are processed in the LUW concluded by the COMMIT WORK command. All V1 update requests specified in CALL FUNCTION u2026 IN UPDATE TASK are also executed in one LUW . When all V1 update requests have been successfully concluded, the V2 update requests (u201Dupdate with start delayedu201D) are processed, each in one LUW . Parallel to this, the function modules specified in CALL FUNCTION u2026 IN BACKGROUND TASK are each executed in one LUW per destination.
COMMIT WORK commands processed within CALL DIALOG processing
- execute a database commit (see above),
- close all open database cursors,
- reset the time slice counter and
- call the function modules specified by CALL FUNCTION IN
BACKGROUND TASK in the CALL DIALOG processing.
However, subroutines and function modules called with PERFORM u2026 ON COMMIT or CALL FUNCTION u2026 IN UPDATE TASK in the CALL DIALOG processing are not executed in the calling transaction until a COMMIT WORK occurs.
Since COMMIT WORK closes all open database cursors, any attempt to continue a SELECT loop after a COMMIT WORK results in a runtime error. For the same reason, a FETCH after a COMMIT WORK on the now closed cursors also produces a runtime error. You must therefore ensure that any open cursors are no longer used after the COMMIT WORK .
With batch input and CALL TRANSACTION u2026 USING , COMMIT WORK successfully concludes the processing.
Addition
u2026 AND WAIT
Effect
The addition u2026 AND WAIT makes the program wait until the type V1 updates have been completed.
The return code value is set as follows:
SY-SUBRC = 0 The update was successfully performed.
SY-SUBRC <> 0 The update could not be successfully performed.
Note
Runtime errors
COMMIT_IN_PERFORM_ON_COMMIT : COMMIT WORK is not allowed in a FORM callled with PERFORM u2026 ON COMMIT .
COMMIT_IN_POSTING : COMMIT WORK is not allowed in the update task.
Hope it will help you.
Feel free to ask any doubt.
Regards
Aparna
Maybe you are looking for
-
How can I delete a single unwanted page in a Pages document?
I'm unable to delete a single unwanted page from a document.
-
When ipod connected won't update
The last time I connected my iPod I had added a bunch of songs and went over capacity and iTunes automatically made one giant playlist replacing all the other playlists I had made. I wanted my original playlists back so I deleted a bunch of songs and
-
Livetype "Not enough memory to render a frame"
I'm doing some really easy (fade in, fade out) text for an instructional video in Livetype. My first problem was nesting the .ipr files in final cut and rendering. When I rendered and compressed to DVD one frame of each 7 second clip flashed "unrende
-
Wi-Fi sync not working, proper steps followed
I know there are a lot of discussions on this, but it doesn't seem that my particular issue has been resolves. I have an iPhone 4, MacBook Pro running Lion 10.7.2 and iTunes 10.5 (64 bit). I'm also running a Linksys E2000 router. Both of them are
-
HT4063 How do I turn back on "automatic uploads" to Apple?
Having, at some point in the past, turned off the automatic error reporting to Apple, I now find that it would be a good idea if I did send the data to them. However, the option to turn on the automatic upload appears to be a one way route and so I w