SAP Solman Installation

I need to install SAP Solman 7 + EHP1; AS ABAP +DB on one server and java on other server, based on Windows 2K3 Ent Server 64bit and Oracle 10.2. This is because of the limited hardware resources on a single server.
Is it mandatory to have ABAP and JAVA on same box with Solman ? I know you can add dialog instances later.
When I try to install using sapinst --> SAP Systems --> --> --> Oracle and Central System; it asks me for Java component. It does not proceed further unless I mention the java export location. Same happens if I select a distributed installation ?
Can someone please help me understand this behavior ?
Thanks,

For Solution Manager it's not possible to separate ABAP + Java due to technical restrictions.
Markus

Similar Messages

Multiple clients on one instance of SAP SolMan

Hello,
I have doubt about the conductibility of SAP Solution Manager to support more than one client, as an example, ones for Development and the other for production. I think that the limitation is due to the Java side which does not allow to perform more than one client.
Up to know, I have browsed SAP Solution documents and have not found any indication about this kind of restriction, more than 1 client per instance of SAP SolMan.
Look forward in hearing from your insight comments.
Regards,
Rodolfo Neuhaus

Installation guide:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000718044&_OBJECT=011000358700000291922009E
page 37:
4.1.7 SAP Solution Manager Client Strategy
SAP delivers a client with a standard configuration for SAP Solution Manager as part of the installation
process. Client 000 is the initial configuration client, and client 001 is provided for productive use.
Additional clients can be created if desired
So I don't see an issue...but i would not recommend it...

Trouble with SAP system installation GUI

Hello all,
I've installed SLES10 SP2 X86_64 without any problem. During the installation I marked "SAP desired" option to get SAPINIT package installed.
After initial settings of environment variables and all the stuff, I ran the SAP installation via ./sapinst command (as root). The system displayed proper notice:
guiengine: No GUI server connected; waiting for a connection on host server, port 21200 to continue with the installation
but instead of displaying of SAPGUIInstallation on my local PC nothing happend. I use Putty with X11 forwarding option and Xming. Normally this works fine, but not now. I tried the XCLOCK - this works ok.
So I ran the ./sapinst in X11 directly on the server in ptty7. The SAPGUIInstallation came up. So I shut it down and kept trying to start the installation remotely. After 2hours I came back to X11 to check the SAPGUIInstalltion is still working .. and guess what - even there the GUI haven't been starting since.
Do you have any idea, what should be wrong or where should I look ?
Thank you in advance for ANY hint.
Rgds
Tomas

Hello Hannes,
here are answers for you points:
- java-1_4_2-ibm-1.4.2_sr11
- sapinst (of SAP SolMan) from SAP Package official delivery (with SAP NetWeaver04S SP3)
There is one more note to be mentioned:
the true is, that when I try to run ./startInstGui.sh (from the same directory as sapinst binary - it comes togethere on Installation Master DVD) .. I get following error:
Java Runtime found in SAPINST_JRE_HOME environment variable
Path: /usr/lib64/jvm/jre/bin/java
Start mode: gui (GUI only)
Connection parameters:
GUIServer host: localhost
GUIServer port: 21212
Starting...
<<< frog.jar: version 5.4.5 10/19/05 sap.theme: null >>>
Warning: Cannot convert string "--lucida-medium-r--------*-iso8859-1" to type FontStruct
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.sdt.util.misc.MethodCall.invoke(MethodCall .java:82)
at com.sap.sdt.util.misc.BootStrapper.start(BootStrap per.java:107)
at SDTGui.main(SDTGui.java:46)
Caused by: java.lang.InternalError: java/langNullPointerException
So if the "startInstGui.sh" is run on the background after the GUIserver initialization (previous post), it also probably dumps. I just can not find the log about that.
I guess I should solve this exception first .. only thing is I dont know how
Any ideas ?
Thank you !
Tomas

SAP SOLMAN - SECURE STORE FILES MISSING

Hi SDN,
while installing SAP SOLMAN 4.0 CI the sapinst asks me for the secure store files that didn't exist in the data directory, i found the same issue in the forums but none solved my problem.
someone knows how can i create this secure store files manually ?
thanks and best regards,
Pedro

Quite the same thing for me with a JAVA MCOD installation. Were you able to find out a solution ?
Best regards.
David.

Error during SolMan Installation

Hello,
during the SolMan Installation (in step Import ABAP) I get the following errors:
(IMP) ERROR: DbSlEndModify failed
rc = 26, table "AVERS"
(DB) INFO: AVERS_EXT created#20070315180621
(DB) INFO: AVERS_EXT~0 created#20070315180621
(IMP) ERROR: DbSlEndModify failed
rc = 26, table "AVERS_EXT"
(DB) INFO: BADI_CHAR_COND created#20070315180621
(DB) INFO: BADI_CHAR_COND~0 created#20070315180621
(IMP) ERROR: DbSlEndModify failed
rc = 26, table "BADI_CHAR_COND"
(DB) INFO: BADI_FILTER created#20070315180621
(DB) INFO: BADI_FILTER~0 created#20070315180621
(IMP) ERROR: DbSlEndModify failed
rc = 26, table "BADI_FILTER"
(DB) INFO: BADI_IMPL created#20070315180621
The database is SAP DB.
Can you assist?
Thanks,
Sven.

Hello,
droping tables and re-creating solve the problem also for me. Thanks.
error:
(IMP) ERROR: DbSlEndModify failed
rc = 26, table "xxx"
Import on unix (linux) to MaxDB.
Regards,
Peter Corba

Problem with SolMan installation on linux

Hi,
I am planning to install SAP Solution Manager in SUSE Linux 11.1 version. I have installed Linux and installed JDK 1.4.2_19 version and have set the JAVA_HOME and PATH environment variables.
Now when i try to execute ./sapinst from IM<OS> folder as root user, i am getting the following error.
guiengine: No GUI server connected;waiting for a connection on host Linux-fgg3, port 21200 to continue with the installation
Kindly help me out...
Thanks,
Madhukar R

Madhukar,
Check the below forums which also discuss about same problem like yours.
Trouble with SAP system installation GUI
error in installation of solution manager
Regards,
Debasis.

Unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

Hi,
For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
BR,
Mangesh

Problem with services of SAP after installation of ABAP on MS SQL server

Hi,
I am trying top install 2004 Netweaver ABAP+ JAVA on my machine
Following is my machine configuration -
Machine type - Windows 2003 Standard Edition SP1
Machine name - pun-idmqa-vm1
SAP Instance name - QSA
DB type - MS SQL 2000 SP4 + hotfixes and instcoll.exe is executed. After nstalling SQL shows server proper as SQL_Latin1_General_CP850_BIN2 collation
Message port - 3600
I could sucessfully install Database from CD and thereby could sucessfully install ABAP. During postinstall I tried to start the server. all the following services got up -
msg_server.exe
disp+work.exe
igswd.exe
But after some time 2nd service goes down. Following is the error message flashed in
trc file: "dev_disp", trc level: 1, release: "640"
Mon Jul 02 16:33:16 2007
kernel runs with dp version 128000(ext=102000) (@(#) DPLIB-INT-VERSION-128000-UC)
length of sys_adm_ext is 524 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 31
intno 20020600
make: multithreaded, Unicode
pid 2492
***LOG Q00=> DpSapEnvInit, DPStart (00 2492) [dpxxdisp.c 1100]
Mon Jul 02 16:33:17 2007
 shared lib "dw_xml.dll" version 31 successfully loaded
 shared lib "dw_xtc.dll" version 31 successfully loaded
 shared lib "dw_stl.dll" version 31 successfully loaded
 shared lib "dw_gui.dll" version 31 successfully loaded
Mon Jul 02 16:33:21 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 10528 (1316)
DpShMCreate: sizeof(tm_adm) 2780232 (13832)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpShMCreate: sizeof(comm_adm) 290000 (580)
DpShMCreate: sizeof(vmc_adm) 0 (372)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: SHM_DP_ADM_KEY (addr: 054B0040, size: 3192688)
DpShMCreate: allocated sys_adm at 054B0040
DpShMCreate: allocated wp_adm at 054B1B58
DpShMCreate: allocated tm_adm_list at 054B4478
DpShMCreate: allocated tm_adm at 054B44A0
DpShMCreate: allocated wp_ca_adm at 0575B0E8
DpShMCreate: allocated appc_ca_adm at 05760EA8
DpShMCreate: allocated comm_adm_list at 05762DE8
DpShMCreate: allocated comm_adm at 05762E00
DpShMCreate: allocated vmc_adm_list at 057A9AD0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 057A9AF8
DpShMCreate: allocated wall_adm at 057A9B00
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
Mon Jul 02 16:33:22 2007
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation std
<EsNT> Memory Reset enabled as NT default
<EsNT> EsIUnamFileMapInit: Initialize the memory 1132 MB
<ES> 1131 blocks reserved for free list.
ES initialized.
Mon Jul 02 16:33:36 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 2.6.1 2.6 4.0) [dpxxdisp.c 1462]
Mon Jul 02 16:33:38 2007
***LOG Q0K=> DpMsAttach, mscon ( pun-idmqa-vm1) [dpxxdisp.c 9719]
Mon Jul 02 16:33:46 2007
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
Mon Jul 02 16:33:47 2007
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 31
Release check o.K.
Mon Jul 02 16:34:20 2007
ERROR => W0 (pid 2740) died [dpxxdisp.c 12170]
ERROR => W1 (pid 3736) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 3876) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3896) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 3852) died [dpxxdisp.c 12170]
ERROR => W5 (pid 2008) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3776) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 4052) died [dpxxdisp.c 12170]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-2740 (SIGUSR2)
ERROR => DpWpKill(2740, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-3736 (SIGUSR2)
ERROR => DpWpKill(3736, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-3876 (SIGUSR2)
ERROR => DpWpKill(3876, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-3896 (SIGUSR2)
ERROR => DpWpKill(3896, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-3852 (SIGUSR2)
ERROR => DpWpKill(3852, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-2008 (SIGUSR2)
ERROR => DpWpKill(2008, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3776 (SIGUSR2)
ERROR => DpWpKill(3776, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-4052 (SIGUSR2)
ERROR => DpWpKill(4052, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:30 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Mon Jul 02 11:04:30 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2740 Ended no 1 0 0
1 DIA 3736 Ended no 1 0 0
2 UPD 3876 Ended no 1 0 0
3 ENQ 3896 Ended no 1 0 0
4 BTC 3852 Ended no 1 0 0
5 BTC 2008 Ended no 1 0 0
6 SPO 3776 Ended no 1 0 0
7 UP2 4052 Ended no 1 0 0
Dispatcher Queue Statistics Mon Jul 02 11:04:30 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 7 ( 77%), shm 2 ( 22%)
since last update total 9, udp 7 ( 77%), shm 2 ( 22%)
Dump of tm_adm structure: Mon Jul 02 11:04:30 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Mon Jul 02 11:04:30 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:35 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (3832) (SOFT_KILL)
Stop icman
killing process (3960) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:3832 HANDLE:1600)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1629
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Jul 02 16:34:36 2007
NiISelect: TIMEOUT occured (1000 ms)
Mon Jul 02 16:34:37 2007
[DpProcDied] Process died (PID:3832 HANDLE:1600)
[DpProcDied] Process died (PID:3960 HANDLE:1588)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'pun-idmqa-vm1'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9945]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 19)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1608
MsIDetach: detach MS-system
Mon Jul 02 16:34:38 2007
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 2492) [dpxxdisp.c 8478]
Good Bye .....
I am new to SAP EP installation. Please help me regarding this issue.
Thanks and Regards,
Smitha

forgot to tell you, after that probably you will need to make the installation again.
good luck.

SAP SOLMAN 7.1 error in ATM for DBACOCKPIT

Hi Experts,
My client's SAP Solution Manager 7.1 has been displaying the error message - "Error in RDI back-end setup occured!", since last one week. I am unable to analyze this to resolution, as there is nothing I couldn't find closely relative in the standard database SAP Sybase 15.7. ASE server configuration guides or in the SCN itself for that matter, which would help me resolve this bugging error.
I have also checked in system logs but have always found different types/varieties of database errors everyday. I am attaching the error screenshots for your kind reference and consideration. Kindly note that I have worked on most databases previously in an efficient manner except for Sybase ASE, which is relatively new to me.
When I click on repair, I am getting the following error, which my SAP Basis PM/lead has told me its a generic error.
Upon clicking on yes, I am getting the unavoidable error shown below -
The error is - "Error in RDI back-end setup occured!", as i have stated above.
I have checked the ATM logs and history and they are fine. I am getting error only in the ATM queue as shown below -
I am also getting the same database errors in event viewer as to those in the system logs for SAP SOLMAN 7.1 server.
I would appreciate it very much if one of the Sybase experts would help me out here. Speaking of technical configuration for any database in conceptual terms, I perceive this error to be a space issue as mentioned in the ATM queue. I believe I have provided sufficient details. The OS here is the Windows server 2008 R2 version.
Kindly mention if you need more details for a speedy and possible error analysis and resolution
This is an emergency task for me as I need to resolve it on ASAP basis. Rest assured, points for all right answers will be awarded generously.
Thanks and regards,
M. Nizam

Hi Nizam,
Please share what is the database patch level for Sybase ASE 15.7
Additionall please review below SAP notes
1619967
SYB: DBA Cockpit Correction Collection SAP Basis 7.31
1558958
SYB: DBA Cockpit Correction Collection SAP Basis 7.02 / 7.30
1920025 DBACOCKPIT - Error 'Repair ATM' when started from different systems
Hope this helps.
Regards,
Deepak Kori

Migration SAP SolMan 7.1 MSSQL 2008 R2 Enterprise Edition to MSSQL Standard Edition

Hello,
I try to migrate a SAP SolMan 7.1 on Windows MSSQL 2008 R2 ENTERPRISE EDITION to
MSSQL 2008 R2 STANDARD EDITION.
In the source system (MSSQL 2008 R2 ENTERPRISE EDITION) there is "table compression" and
"partitioning" active.
the MSSQL STANDARD EDITION doesn`t support these two features.
So a normal DB backup on the source system and restore in the destination system is not possible.
But the tables compression I can deactivte by the SQL script
SELECT DISTINCT ‘ALTER TABLE [' + SCHEMA_NAME(schema_id) + '].[' + NAME + '] REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = NONE);’
FROM sys.partitions p
join sys.objects o
on p.object_id = o.object_id
WHERE o.TYPE = ‘u’
and data_compression_desc != ‘NONE’
UNION
SELECT ‘ALTER INDEX ALL ON [' + SCHEMA_NAME(schema_id) + '].[' + NAME + '] REBUILD PARTITION = ALL WITH (DATA_COMPRESSION = NONE);’
FROM sys.partitions p
join sys.objects o
on p.object_id = o.object_id
WHERE o.TYPE = ‘u’
and data_compression_desc != ‘NONE’
is there a way to undo or deactivate the the SQL table partitioning without any data lost ?
Or is there a other way to migrate a SAP SolMan 7.1 form MSSQL 2008 R2 ENTERPRISE EDITION to MSSQL 2008 R2 STANDARD EDITION ?
Best regards
A. Moore

Hi Moore
Could you refer the SAP Note for MS Sql Version supports
1076022 - Release planning for Microsoft SQL Server 2008 (R2)
and MS SQL table compression & decompression SAP Note
1488135 - Database compression for SQL Server
BR
SS

We looking for sap xi installation in our office, how to approach with SAP

we looking for sap xi installation in our office, how to approach with SAP Services.
What are the uses of SAP Netweaver Platform Integration,can you give me the details of this and , from where i can get this one.
And what are the components i need to buy ,plz any one of you send it to me.
Thanks & Regards,
priya reddy

Hi barry,
Thank you very much for u r reply
Thanks & Regards,
priya reddy

Prerequisites for SAP XI installation?

Hi,
Could any one help me out to know the prerequisite for SAP XI installation?
Thanks & Regards,
Yaseen Mahammad.

HI Yaseen,
The prerequisite for SAP XI installation are
1> You just require to have a WAS (WEB APPLICATION SERVER 6.40 ) installed with a ABAP stack as well as java stack.
2> You need to have a SLD installed.It can be on same or different system.
Its better if you follow the Master installable.
If you are installing XI 2004s it asks you for all the options in a sequence , for which all components you wish to install(eg. XI or MI etc) on your WAS.
Regards,
Yomesh

SAP Solman EWA System ABAP error

Hi,
SAP Solman EWA services trows error .
The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
Syntax error in program "RDSVASAEA_ROOT_____________061".
The following syntax error occurred in program "RDSVASAEA_ROOT_____________061"
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000208" not found."
It throws same error for
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000300" not found."
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000315" not found."
**I tried the function module "BDL_GENERATE_LOGFUNC_INCLUDES" with the value "ALL" in the 'OPTION' field.
As well as 'UPDATE' but it throws error for these includes mentioned above.
Can anyone help for the same without SAP NOTE - 727998
Thanks in advance
Sachin Soni

>
Sachin Soni wrote:
> The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
>
> Syntax error in program "RDSVASAEA_ROOT_____________061".
>
> The following syntax error occurred in program "RDSVASAEA_ROOT_____________061"
Have you reported the correct program name?
According my information, "RDSVASAEA_ROOT_____________061" has not been created (nor shipped to customers).
You stated, that the recommended SAP Note did not help. I would suggest to request help from SAP Support via a customer message on SV-SMG-SDD.
Best regards,
Ruediger

SAP DB installation failed!

Hi ,
i am installing content server & cache server on my machine.
while installing i am getting the following error:
"SAP DB installation failed"
i had uninstalled once, and renamed the SAP DB to run the installtion only to find the above mentioned error.
what could be the problem?
Any inputs would be highly appreciated.
Thanks,
Ravi

hi sunil,
I m also facing the same problem, i m installing SAP content server in a Windows XP machine with 1 GB RAM and Enough HD space.
While installtion it give me SAP DB installation (SID) Failed.
Kindly suggest ASAP

SAP Solman MMC is not opening

Dear all,
i have tried to open SAP Solman MMC, i got the below error .
MMC cannot open the file c: \Documnets and setting\user\Windows\sapmmc.msc.
this may be because the file does not exit, is not an MMC console , or created by a later version of MMC. This may also be because you do not have sufficent access rights to the file .
NOTE : i have logged in SIDADM.
kindly advise
Regards

Dear all ,
now there is no issue to open MMC ,.
I have checked ABAP WP table , it is showing all the work processes and status for work process is waiting .
The same thing i have checked J2EE process table, it is showing there is no items to show in this view nad its not showing any process.
Kindly advise ,
Regards

SAP Solman Installation

Similar Messages

Maybe you are looking for