Sap Solution Manager 3.2 installation

hi,
i get the follow message
ERROR 2006-08-18 14:11:55 [iaxxbrunas.cpp:269]
CIaRunAsUser::run_impl()
MOS-01012 PROBLEM: '/oracle/sapmnt/SM1/exe/startsap all DVEBMGS00' returned with '8' which is not a defined as a success code.
can anybody help me ?
thanks

Hi Shatti,
why do you still install SAP Solution Manager 3.2?
The current version is SAP Solution Manager 4.0 with enhanced functionality, mainstream maintenance until 31.03.2011, SAP Netweaver 2004s Basis, ....
See also:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000226502&_SCENARIO=01100035870000000202&
Best regards
Ruediger Stoecker

Similar Messages

SAP Solution Manager 4.0 Installation

hi,
I install Solution Manager 4.0 and in the step Install database server software,i am requested to log on
as orasid and change to the directory
/oracle/stage/102_64/database/Disk1/SAP and run ./RUNINSTALLER.
Because the subdirectories /database/Disk1/SAP not exists and i can't run ./runsinstaller to install the database!
Can someone help me
Message was edited by: Necati D.

Hi,
it is normally esay to install Oracle .
Normally , the sapinst should have extract Database
software in /oracle/stage/102_64/ ..
But off ocurse, at the beginning of the installation
sapinst ask u to locate RDBMS dvd.
so first :
check where the RDBMS have been extracted.
the standard path (for Oracle 10G for example) is
/oracle/stage/102_64/
then follow the INSt Guide,
connect orasid,
then
go to
/oracle/stage/102_64/database/Disk1/SAP
here, u will find RUNINSTALLER script.
dont forget to execute rootpre.sh befreo as mentioned in the guide.
REgards.
Stef.

Urgently required Good Installation Document for SAP Solution Manager 4.0

Hello Experts,
Iam implementing /installing SAP Solution Manager 4.0 in our scenario in a day/two. My query is tat do we need to install it APAP + JAVA based only or can we install it ABAP based only?
Secondly i needed good self prepared document for SAP Solution Manager 4.0 installation which gives me step wise step procedure in detail.Plz dont give service marketplace link as i hv already seen and checked installion guide over it ,act. i wanted self prepared doc which is of more use. The useful answers shall be surely awarded points. Requested to revert at earliest as i need this guide in a day itself.
My Email Id is [email protected] .
Regards,
Saumya

Hey Somya,
Can u plz send me the configuration guide of change request management that Rakesh had sent to you..
My Email-id is [email protected]
Plz its urgent, let me know if u want me to open a new thread so that i can reward you with points..
Tnx in advance.

Solution Manager 4.0 Installation error on vmware

Hi guys,
I try to install the solution Manager 4.0 SR4 in a vmware server Win2003 64bit
and get the following error message in phase 17 (import ABAP)
Execution of the command "C:\j2sdk1.4.2_17-x64\bin\java.exe -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 2. Output:
java version "1.4.2_17"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_17-b06)
Java HotSpot(TM) 64-Bit Server VM (build 1.4.2_17-b06, mixed mode)
Required system resources are missing or not available:
Import directory '
hyperv01\c$\SAPINSTALL\SAP SOLUTION MANAGER 7.0 Installation Export 1\EXP1' does not exist;
Import directory '
hyperv01\c$\SAPINSTALL\SAP SOLUTION MANAGER 7.0 Installation Export 1\EXP2' does not exist;
Import directory '
hyperv01\c$\SAPINSTALL\SAP SOLUTION MANAGER 7.0 Installation Export 2\EXP3' does not exist;
Import directory '
hyperv01\c$\SAPINSTALL\SAP SOLUTION MANAGER 7.0 Installation Export 2\EXP4' does not exist.
of course the path exists and the further dvd locations where also found?
is ther something wrong with the naming of the install dir?
must I have a character for the "harddrive"
Plse help
thank you and br
Wolfgang

Hello shareef,
there is no extra recommendation from SAP regarding SolMan on vmware.
SAP supports installations on vmware wheanwhile also for productive systems (plse check PAM).
The experience I have for my installation:
I works fine til now, no probs.
cu Wolfgang

How to download sap solution manager

Hi all,
I'm studying SAP solution manager when I try to download solution manager components at site:
https://websmp202.sap-ag.de/instguides
with path:
Download --> Installations and Upgrate --> My Company's Application Components" SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 7.0 --> Installation --> Windows Server --> Microsoft SQL_Server --> Downloads
but not successful.
please help me to download this software at this site or let me know the site I can download.
thanks all very much!

Do you have
- download permission?
- a valid installation number for Solution Manager?
Markus

Error in installation of Sap Solution Manager - AIX / Oracle

Hello,
We are installing SAP Solution Manager in Operating System is AIX 5.3 and Database System is Oracle 10.2
After the Oracle Installation, in the phase of Abap Import (16 of 44), we are
receiving the follow error message:
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
ERROR 2007-04-12 15:27:41
CJS-30022 Program 'Migration Monitor' exits with error code 2. For
details see log file(s) import_monitor.java.log, import_monitor.log.

The installation export DVD was copied to local machine (the directory
list is attached in zip file). We get this DVD from
service.sap.com/swdc.
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142ifx-20061222 (ifix 113727: SR7 + 112603) (JIT enabled: jitc))
IMPORT_MONITOR.JAVA shows this message:
java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 2.3)
IBM J9 VM (build 2.3, J2RE 1.4.2 IBM J9 2.3 AIX ppc64-64 j9ap64142ifx-20061222 (JIT enabled)
J9VM - 20061220_10521_BHdSMr
JIT - 20061026_1805_r8
GC - 200612_20)
Required system resources are missing or not available:
Import directory '/oracle/install/51032524/EXP1' does not exist;
Import directory '/oracle/install/51032524/EXP2' does not exist;
Import directory '/oracle/install/51032524/EXP3' does not exist;
Import directory '/oracle/install/51032524/EXP4' does not exist.
And the directory is OK
/oracle/install/51032524
ls -l
total 160
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.ASC
-rwxrwxrwx 1 root system 79 Apr 12 09:54 CDLABEL.EBC
-rwxrwxrwx 1 root system 9093 Apr 12 09:54 COPY_TM.HTM
-rwxrwxrwx 1 root system 5787 Apr 12 09:54 COPY_TM.TXT
-rwxrwxrwx 1 root system 8559 Apr 12 09:54 CRCFILE.DAT
drwxrwxrwx 4 root system 256 Apr 12 10:03 EXP1
drwxrwxrwx 4 root system 256 Apr 12 10:11 EXP2
drwxrwxrwx 4 root system 256 Apr 12 10:14 EXP3
drwxrwxrwx 4 root system 256 Apr 12 10:16 EXP4
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.ASC
-rwxrwxrwx 1 root system 88 Apr 12 09:54 LABEL.EBC
-rwxrwxrwx 1 root system 20 Apr 12 09:54 LABELIDX.ASC
-rwxrwxrwx 1 root system 22361 Apr 12 09:54 SHAFILE.DAT
-rwxrwxrwx 1 root system 22 Apr 12 09:54 VERSION.ASC
Please, anybody have any idea?
Thanks for help,
Carlos Nogueira

Hi Carlos, can you resolve this ? because i have the same problem, but with sql and win 2003.
java version "1.4.2_15"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_15-b02)
Java HotSpot(TM) Client VM (build 1.4.2_15-b02, mixed mode)
Required system resources are missing or not available:
Import directory sapinst\saptrans\D51032007\EXP1' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP2' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP3' does not exist;
Import directory 'sapinst\saptrans\D51032007\EXP4' does not exist.
thanks in avance.

Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"

I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
Edited by: amirsd on Aug 3, 2011 5:53 PM

Hi,
Please check the below
1) ip/host entries should be in /etc/hosts
2) patch the latest kernel for 2008 R2
and re run installation
Regards,
Ram

Please suggest on: SAP Solution Manager Installation

Hi Experts,
We are going to install SAP Solution Manager in our landscape. Our present SAP version is: ECC 6.0 and Database is: Oracle 10.2.0.2 and OS is: AIX 5.3
1. Please suggest us which is the suitable Solution manager version for our environment?
2. What are the pre-requisites and needful steps to take before starting the installation?
3. Where can I get complete step by step documents for this activity?
4. Which OS & DB is suitable for our environment?
Thanks in advance!
Veera

Can I also ask for some confirmation about a couple of things. I have looked at the SAP documents but I can't find a definite answer to these questions:
1. David Kroone - you say that Solution manager should be set up on a new server but I understand that it is possible to run it on one of our existing R/3 servers. Is this correct? Does anyone have any comments about this?
2. David - you also say that we can pick any OS & DB for the Solution Manager server. We are running R/3 on Oracle/Solaris but would prefer to run Solution Manager on a Windows server running SQLServer. Is this definitely OK? (it would be cheaper though you advise that using the same platform could make it simpler - is this because Solution Manager works better on the same platform or is it just because we would then have a more homogeneous environment?)
3. We are currently on 4.7 but plan to move to ECC6 this summer. We want (need?) to install Solution Manager before we upgrade to ECC6. Should this affect our decision in anyway?
Sorry to re-ask the same questions but it's difficult to find a precise answer in the SAP documents.

Installation of SAP Solution Manager 4.0

Hello!
I have one question regarding the installation of SAP Solution Manager 4.0
Do I need to consider the Unicode-installation of SAP Solution Manager 4.0?
We use SAP Solution Manager just for the following scenarios:
Maintenance Optimizer (to patch the existing SAP-systems from SAP Solution Manager)
and monitoring-functionality (CCMS)
Thank you!
Axel

Hi,
Thank you very much to Dolores Correa and Markus Döhr for replying for my querry.FYI-My system users only use English and I do not have any problem of chineese.My problem is that I am not able to install Non-unicode kernel.The Solution manager installation program(sapinst) only takes Unicode kernel CD whereas my satellite systems are non-unicode.Now if unicode solution manager can work with non-unicode satellites,then the problem is solved.
Warm Regards,
Syamkrishnan

Installation Sap Solution Manager

Hello,
I have installed a Sap Solution Manager 4.0 SR (Central System Installation), it was my first installation. The OS is a Windows 2003 Server and the Database is 10.2.0.2. After the installation I see in the MMC 2 instances (as shown on the picture) , but I would have expected only one.
Besides I cant Logon with Standard user Sap* .
[http://img185.imageshack.us/my.php?image=ssmpg3.jpg]
Thanks
Carsten

Hi carsten ,
from solman 3.2 onwards they separated enque and message server and put them in central instance.
you need both CI and database instance.
in the logon pad in the user defined tab enter application server as ssm and SID as S12 , system number as 00. hope it will help you to login. use ddic user to login or change the profile parameter to login using sap*.
thanks,
sandeep.

SAP KW Installation in SAP SOlution Manager 4.0

Dear Friends,
We are planning to install SAP Knowledge Warehouse 7 in our landscape. We have solution Manager 4.0 and planning install SAP KW in SOlution Manager system.
Is it possible to install and SAP KW in solution Manger 4.0 ?
If yes, Do we need to have separate Database and SAP SID for SAP KW ?
Or is SAP KW is just a configuration in SAP SOlution Manager and no separate DB requiered ?
Regards
Graham

I doubt you can install KM in solman.
KM part is associate with EP usage type, which doesnt exist in solman.
All i have hear is you can monitor the KM via solman.

Solution manager 7.1 installation in ECC 6.0 landscape

Dear All,
I am planning to install solman 7.1 SP04 in my landscape where the managed systems are running on ECC 6.0. SP 07(PRD, DEV,...).
Is it fine to start installation with current landscape or i need to upgrade the ECC version.
Any documents available regarding the technical system patch level requirements for Solution manager 7.1 installation.
Please suggest.

Hi Jithu,
Pls refer below links,
Solution Manager installation 7.1
SAP Solution Manager 7.1 – SAP Help Portal Page
Dia Agent Connect To system in solman 7.1 sp10
Regards
K.N

Install SAP Solution Manager with DEV instance in the same server (MCOD)

Hello, i would like to install SAP Solutions Manager together with DEV ECC 6.0 in the same host, DEV is currently installed and working fine.
I followed note 551915 to convert MS-SQL 2005 to MCOD (change of schema from dbo to dev) and worked fine. But when i am installing the SolMan through the sapinst i don´t see the option MCOD
The only option i am confussed is
MS SQL Server
Database reuse o - New Database (DBSID = SAPSID)
o - Use Existing Database
Database ID (DBSID)
Witch option should i choose to perform a MCOD installation? new db or use existing db (DEV)?
Kind Regards

Hi Merchan, if you want to use MCOD you need to select the option: o - Use Existing Database
Database ID (DBSID) .
Regards,
Darwin C.

SAP Solution Manager 4.0 Install on iSeries V5R4M0 fails on STEP 40 of 40

During Step 40 of 40 of Solution Manager 4.0 install on iSeries running i5/OS V5R3M0 failed with the following error:
ERROR 2006-08-18 10:00:57 [iaxxgenimp.cpp:728]
showDialog()
FCO-00011 The step fixTemplate400 with step key
|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Call_Offline_CTC|ind|ind|ind|ind|7|0|fixTemplate400
was executed with status ERROR .
TRACE [iaxxgenimp.cpp:657]
showDialog()
<html><head></head><body>An error occurred while processing service
SAP Solution Manager 4.0 > SAP Systems > IBM DB2 UDB for i
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
***********End of Data*******************
Searching OSS Notes, there is no reference to the FCO-00011 error code

Hello Loli,
I think it was me, who misunderstood.
Now I followed your recommendations, increased virtual memory on the sapinst machine, restarted the pc and the installation and it completed successfully. Thank you very much.
Sorry that I can't give you points for the helpfull answer, because this is not my thread.
Kind regards,
Jürgen Scheckelhoff.

Issue on Solution Manager 4.0 installation SR3

Dear all,
During the Oracle Client installation phase of a SAP Solution Manager 4.0
system installation with sapinst, I get the following error
ERROR 2008-01-21 16:04:06.776 [iaxxejsbas.cpp:178]
EJS_ErrorReporter
FJS-00003 TypeError: linkTarget has no properties (in script
NW_Onehost|ind|ind|ind|ind, line 3431: ???)
ERROR 2008-01-21 16:04:07.399 [iaxxgenimp.cpp:731]
showDialog()
FCO-00011 The step createOcl10Links with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_C
reateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_OraDBCheck|ind|ind|ind|ind|0|0|NW_OraDBMain|ind|ind|in
d|ind|0|0|NW_OraDBStd|ind|ind|ind|ind|3|0|NW_OraClient|ind|ind|ind|ind|3|0|createOcl10Links was executed with status ERROR .
TRACE 2008-01-21 16:04:07.443 [iaxxgenimp.cpp:719]
showDialog()
Any ideas?
Many thanks
Andreas

On Solaris 10 platform...
We found that we could correct the problem by extracting the SAR file OCL10264.SAR from the client DVD into the client directory /oracle/client/10x_64 (which we had to create) and execute "ln -s instantclient_10202 instantclient" to create the symbolic link for the instantclient directory. Then the installation continued successfully.
Credit to Rama Ekambaram for figuring this out...
Tim Pittman

Sap Solution Manager 3.2 installation

Similar Messages

Maybe you are looking for