SAP SOLUTION MANAGER 7.0 EHP 1 - need to update the stack?
I'm trying to understand the enhancement pack concept and what I need to do to update our solution manager.
currently we are on:
SAP SOLUTION MANAGER 7.0 EHP 1 - Stack 21
ST-ICO 150_700: patch 0022
CPRXRPM 400: patch 0015
CRMUIF 500: patch 0003
PI_BASIS Support Package 04 for 7.01
BI_CONT 704: Support Package 04
ABA Support Package 04 for 7.01
Basis Support Package 04 for 7.01
ST 400: Patch 0021, CRT for SAPKU50015
ST-SER 701_2008_2: patch 0005
ST-PI 2008_1_700: SP 0001
SAP_AP 700: Support Package 0016
Support Package 15 for SAP CRM 5.0
BW Support Package 04 for 7.01
I understand the current stack is 24. Is this also EHP 1 ?
I believe I need to update to stack 24 in order to stay current. Is that correct?
In addition, EarlyWatch indicates that the ST-A/PI is missing. Actually it exists but is not the current package. I believe by updating the stack, the ST-A/PI will also be updated. Is this correct?
Should I update the stack to 24? or just update the ST-A/PI?
Thanks
Laurie McGinley
Hi,
>
> I understand the current stack is 24. Is this also EHP 1 ?
>
Yes, check SAP note 1244225.
> I believe I need to update to stack 24 in order to stay current. Is that correct?
>
Yes
> In addition, EarlyWatch indicates that the ST-A/PI is missing. Actually it exists but is not the current package. I believe by >updating the stack, the ST-A/PI will also be updated. Is this correct?
>
Yes. Current support package for ST-A/PI is ST-A/PI 01M_CRM570.
> Should I update the stack to 24? or just update the ST-A/PI?
SAP always suggest to be on current support package. But I always prefer to upgrade to n-1 strategy.
Thanks
Sunny
Similar Messages
-
SAP SOLUTION MANAGER 7.0 EHP
Hi
We have a test server in which solman is installed with SP level 12 now we want to upgrade it to SAP SOLUTION MANAGER 7.0 EHP 1 Support Package Stack 18 (11/2008) .
My questions
1:Is it possible to directly upgrade from SP12 to EHP 1 Support Package Stack 18
Iam aware of that we need to update the kernel to 7.01 and SPAM to at least 35 patch level apart from these what are the other prerequisties i need to follow
Regards
UdayHi
I was checking at Note 1169247 - Enhancements to Solution Manager 7.0 EHP1 upgrade (SPS18,19) in contents
5:Download by stack download (optional)
Log on to SWCenter on SAP Service Marketplace:
Support Packages and Patches -> Entry by Application Group -> SAP Technology Components -> SAP Solution Manager -> SAP Solution Manager 7.0 -> Support Package Stacks.
Target stack : SAP Solution Manager 7.0 EHP1-19 (03/2009)
Source stack : <your SAP Solution Manager 7.0 system stack>
-> SAP Solution Manager 7.0 EHP1 -> Support Package Stacks
Target stack : 19 (03/2009)
Source stack : 18 (11/2008)
Iam at stacklevel 17 and could not find stack level 17 in Source stack
should i select Source stack : 18 (11/2008) and Target stack : 19 (03/2009) ?
but my system is at stacklevel 17 only
when i leave source stack blank and select target as 19 i could see lot of file which i have applied are in the list
Please help me out
Note: Iam not using MOP
Regards
Uday -
Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"
I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
Edited by: amirsd on Aug 3, 2011 5:53 PMHi,
Please check the below
1) ip/host entries should be in /etc/hosts
2) patch the latest kernel for 2008 R2
and re run installation
Regards,
Ram -
Installation of SAP Solution Manager 4.0
Hello!
I have one question regarding the installation of SAP Solution Manager 4.0
Do I need to consider the Unicode-installation of SAP Solution Manager 4.0?
We use SAP Solution Manager just for the following scenarios:
<b>Maintenance Optimizer</b> (to patch the existing SAP-systems from SAP Solution Manager)
and <b>monitoring-functionality (CCMS)</b>
Thank you!
AxelHi,
Thank you very much to Dolores Correa and Markus Döhr for replying for my querry.FYI-My system users only use English and I do not have any problem of chineese.My problem is that I am not able to install Non-unicode kernel.The Solution manager installation program(sapinst) only takes Unicode kernel CD whereas my satellite systems are non-unicode.Now if unicode solution manager can work with non-unicode satellites,then the problem is solved.
Warm Regards,
Syamkrishnan -
Kernel Update from 7.00 to 7.01 - SAP Solution Manager EHP1
Can anyone give me some information about update sap kernel?
How must I proceed?
Thanks!Login to service market place www.service.sap.com>downloads>supporpackages and patches>My company applicationsselect sap solution manager>SAP SOLUTION MANAGER 7.0 EHP 1>Entry by component>solution mangaer ABAP stack>select sap kernel 7.01 64 bit unicode-->select widows
server on X64bit>select database indendent>just scroll download you can see list of pathces select SAPEXE_23 which is the lates one and selet the check bot to add to download manager now select database dependant patch based on your database you have installed(Ex oracle or MS SQL)
select the same patch SAPEXEDB_23 and download the 2 patches through download manager
uncar the 2 patches throught sapcar command
sapcar -xvf <and give the patchnameSAPEXE......SAR>
sapcar -xvf <and give the patchnameSAPEXEDB......SAR>
Now take the backup of existing kernel
Drive:/usr/sap/SID/SYS/exe/uc
once the backup of kernel is finshed stops SAP and releated services
start>cmd>services.msc-->stop the service sap<SID_instance number> and saposcol service
now copy all the uncar newfiles to original run directory and replace all.If you face
problem like some service is still running then stop all the oracle services also and
try again.
Once all the files are copied then start the services and SAP
Let me know if needed more information
Regards
Uday -
What are installations material for Solution Manager 7.0 EHP 1
hi friends,
we plan to do installing Solution Manager 7.0 ehp1,
can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
thanks..https://service.sap.com/swdc
-> SAP Installations and Upgrades
-> Installations and Upgrades - Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 7.0 EHP 1
-> Installation and Upgrade
Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
Installation.
Nelis -
Install SAP Solution Manager with DEV instance in the same server (MCOD)
Hello, i would like to install SAP Solutions Manager together with DEV ECC 6.0 in the same host, DEV is currently installed and working fine.
I followed note 551915 to convert MS-SQL 2005 to MCOD (change of schema from dbo to dev) and worked fine. But when i am installing the SolMan through the sapinst i don´t see the option MCOD
The only option i am confussed is
MS SQL Server
Database reuse o - New Database (DBSID = SAPSID)
o - Use Existing Database
Database ID (DBSID)
Witch option should i choose to perform a MCOD installation? new db or use existing db (DEV)?
Kind RegardsHi Merchan, if you want to use MCOD you need to select the option: o - Use Existing Database
Database ID (DBSID) .
Regards,
Darwin C. -
New features in SAP Solution Manager 4.0
Hello Experts,
Can anybody give me a good list of new additional features in SAP Solution Manager 4.0 with description and wt r the business benefits of implementing those features.Plz dont give marketplace pdf links as i hv checked it.any good Word which is self prepared wll be helpful. Useful answers shall be rewarded points. Requested to revert at earliest as i hv to present tat to my seniors here and is urgent. My Email Id is [email protected] .
Regards,
SaumyaHi,
Solution manager is a SAP component.It's a free software provided by SAP.After 640 release on wards if you want to install any software solman key is mandatery field.
Using solution manager we need to do the fallowing things.
1.solution manager CEN and Alerting configuration guide for dummies.
2.system monitoring configration guide for dummies.
3.service desk configuration guide for dummies.
4.ccms monitoring configuration guide for dummies.
From april onwards we need to down load the support packs through solution manager.In order to do this one we need to configure maintanace optimizer.
i hope it will help you.
kiran kumar.v -
Configuration for Central Monitoring System in SAP Solution Manager.
Hi Folks,
I am trying to setup Central System Monitoring in SAP Solution Manager, I am following the document which mention the step by step instructions.
There are couple of items on which I am really confused.
In the documentation it says to activate Background Dispatching & Central System dispatching in 000 client of Solution Manager,
it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
Can you guys please help me to configure properly?
One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
Also, is there any document which clearly explains the setup of Central System Monitoring in SAP Solution manager using both approaches and also to test the monitoring?
I have SAP Solution Manager 7.0 EHP1.
Thanks.
JenniferHi,
>
> it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
>
You should created this user in working client.
> Can you guys please help me to configure properly?
>
> One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
>
You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
Thanks
Sunny -
JSM : Job Management in SAP Solution Manager - Questions ?
01. I want to use the job request process in SAP Solution Manager. Which
technical prerequisites need to be fulfilled to use this functionality ?
02. I am using a service desk other than the SAP Solution Manager service
desk. How can the job request information be forwarded to this service desk?
03. I want to create a job request via a link in your companyu2019s intranet. What
authorizations does my user need to create the job request?.
04. What is the consequence if i assign the job in your job documentation to a
logical component instead of a business process?
05 How can i configure the monitoring for a job scheduled with job
documentation?
RgdsHello,
you should have a look into SAP note 1054005 - "FAQ: Job Scheduling Management with SAP Solution Manager" for technical requirements. If the job doc is not assigned to a business process then BPMon cannot be used for the respective job.
All other questions should have been answered at [http://wiki.sdn.sap.com/wiki/display/SM/FAQJobSchedulingManagement|http://wiki.sdn.sap.com/wiki/display/SM/FAQJobSchedulingManagement]
Best Regards
Volker -
Release Notes SAP Solution Manager 7.0 EhP1 - SP21 - SP23 available
Now available:
[Release Notes SAP Solution Manager 7.0 EHP 1 - SP 21-23|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&_OBJECT=011000358700000528082010E]
The document is published in the following folder with "Technical Information":
[http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&]
SP23 includes several new functions in the area "Application Incident Management", which have been requested by VARs.
Regards, RuedigerPlease see also this detailed presentation:
[SAP Solution Manager SP23 - New Functions for VAR Partners|http://service.sap.com/~sapidb/011000358700000580432010E] -
Configuration Guide in SAP Solution Manager
Hi all,
I'm reading documentation on a CRM scenario (Investigative Case Management : ICM). It says that the ICM configuration guide is assigned to the scenario 'Criminal Investigation Processing' (Public Security) in the SAP Solution Manager.
I don't have access to the SAP Solution Manager but wanted to know if I could find this ICM configuration guide somewhere on the SAP Market Place.
Alternatively, if I could access a SAP solution Manager system, how could I access this ICM configuration guide?
Thanks a lot in advance
Best regards
StephanieHi
this will solve ur prob
https://websmp210.sap-ag.de/~sapdownload/011000358700000478762009E/HowToCreateConfGuide.pdf
Regards
Prakhar -
How to Transfer Customizing Data from SAP ECC6 to SAP Solution Manager
Hi all,
I want to Transfer Customizing Data (such as organization structure) from SAP ECC6 to SAP Solution Manager.Please tell me how. Thanks.Hi,
The system cannot capture the customizing data from your ECC6. This is another myth with SAP Solution Manager. Solution Manager can only smoothen the process of your Project Management.
Hope this solves your problem.
Feel free to revert back.
--Ragu -
Successor of SAP Solution Manager SPS 20
Hi!
Has some one of you information about the successor of SAP Solution Manager after SPS 20?
If yes, when the next SPS will be delivered and what will be the new function?
Thank you!>
Holger Thomasson wrote:
> Has some one of you information about the successor of SAP Solution Manager after SPS 20?
>
> If yes, when the next SPS will be delivered and what will be the new function?
Hi Holger,
The successor is SPS21, which is expected to be released for customers in calendar week 44/2009 (end of October 2009).
[SAP Support Package Stack Schedule|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000722640&_SCENARIO=01100035870000000202&]
There does not yet exist any (public) information what improvements are contained in SPS21.
In general, you should expect mainly bug fixes.
Best regards,
Ruediger -
Upgrade to SAP Solution Manager 3.2 to 7.0 EHP
Dear Experts
At present I am using SAP Solution manager 3.2. Now I am planing to update SAP Solution Manager 7.0.
I am some confutation in SAP Solution Manager 7.0 and SAP Solution Manager 7.0 EHP1,
what i do please help me.
Regards
Sanjay C.EHP1 is basically a product enhancement of 700 - i.e offers new functionality
Usually to get to Enhancement packages you need to be operating NW2004S stack based product - in this case 4.0 (now called Solution Manager 7.0)
I think this proposal will require first an upgrade from 3.2 to 4.0
then after applying Enhancement Package EHP1 and following pre-reqs for both steps
Also bearing in mind that Solution Manager is RFC dependant any change in SID, Hostname or client will require
all RFC connections will need to be adapted
There may also be special considerations depending on source configuration or the active Solution Manager scenarios and content
I would take a look at following PDF for reference - it may help in the initial 3.2-->4.0 upgrade
http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&_OBJECT=011000358700000208052007E
Best wishes
Stuart
Maybe you are looking for
-
Developer Security with HTMLDB (Application Express)
Hi folks. I would appreciate any help I could get with this problem - it's a fairly serious one and I'm hoping for some feedback. We are using HTMLDB 2.0 and are using Oracle Applications. We have a rogue developer who has a bit of a control problem
-
Adobe bridge preview magnification ratios
Hi, As you know, Adobe Bridge to view the image in full screen space (space) d-pad key is pressed. Then, the image with the mouse scroll ball is 100% - 200% - 400% and 800% as the be grown.This growth rate of 50% is not 100% to start with, for exampl
-
How to Display key/text in default selection screen?
HI Gururs, I want to display key/text in variable default selection screen in BI Analyzer in Quality. please give me any suggestions to resolve this. Thanks vadlamudi
-
Printer Settings for Epson not working in LR and PE 12, crashes programs when I click.
In LR 4.4 and PE 12, after I have set all my color management info in the program's print panel to the Epson printer and to the correct paper, I go to Page Setup, select the paper size and printer, then Printer Settings, select Printer, then attempt
-
Continually get pop up box "The song "song title" could not be used because the original file could not be found. Would you like to locate it?"