SAP SOLUTION MANAGER 7.0 EHP
Hi
We have a test server in which solman is installed with SP level 12 now we want to upgrade it to SAP SOLUTION MANAGER 7.0 EHP 1 Support Package Stack 18 (11/2008) .
My questions
1:Is it possible to directly upgrade from SP12 to EHP 1 Support Package Stack 18
Iam aware of that we need to update the kernel to 7.01 and SPAM to at least 35 patch level apart from these what are the other prerequisties i need to follow
Regards
Uday
Hi
I was checking at Note 1169247 - Enhancements to Solution Manager 7.0 EHP1 upgrade (SPS18,19) in contents
5:Download by stack download (optional)
Log on to SWCenter on SAP Service Marketplace:
Support Packages and Patches -> Entry by Application Group -> SAP Technology Components -> SAP Solution Manager -> SAP Solution Manager 7.0 -> Support Package Stacks.
Target stack : SAP Solution Manager 7.0 EHP1-19 (03/2009)
Source stack : <your SAP Solution Manager 7.0 system stack>
-> SAP Solution Manager 7.0 EHP1 -> Support Package Stacks
Target stack : 19 (03/2009)
Source stack : 18 (11/2008)
Iam at stacklevel 17 and could not find stack level 17 in Source stack
should i select Source stack : 18 (11/2008) and Target stack : 19 (03/2009) ?
but my system is at stacklevel 17 only
when i leave source stack blank and select target as 19 i could see lot of file which i have applied are in the list
Please help me out
Note: Iam not using MOP
Regards
Uday
Similar Messages
-
SAP SOLUTION MANAGER 7.0 EHP 1 - need to update the stack?
I'm trying to understand the enhancement pack concept and what I need to do to update our solution manager.
currently we are on:
SAP SOLUTION MANAGER 7.0 EHP 1 - Stack 21
ST-ICO 150_700: patch 0022
CPRXRPM 400: patch 0015
CRMUIF 500: patch 0003
PI_BASIS Support Package 04 for 7.01
BI_CONT 704: Support Package 04
ABA Support Package 04 for 7.01
Basis Support Package 04 for 7.01
ST 400: Patch 0021, CRT for SAPKU50015
ST-SER 701_2008_2: patch 0005
ST-PI 2008_1_700: SP 0001
SAP_AP 700: Support Package 0016
Support Package 15 for SAP CRM 5.0
BW Support Package 04 for 7.01
I understand the current stack is 24. Is this also EHP 1 ?
I believe I need to update to stack 24 in order to stay current. Is that correct?
In addition, EarlyWatch indicates that the ST-A/PI is missing. Actually it exists but is not the current package. I believe by updating the stack, the ST-A/PI will also be updated. Is this correct?
Should I update the stack to 24? or just update the ST-A/PI?
Thanks
Laurie McGinleyHi,
>
> I understand the current stack is 24. Is this also EHP 1 ?
>
Yes, check SAP note 1244225.
> I believe I need to update to stack 24 in order to stay current. Is that correct?
>
Yes
> In addition, EarlyWatch indicates that the ST-A/PI is missing. Actually it exists but is not the current package. I believe by >updating the stack, the ST-A/PI will also be updated. Is this correct?
>
Yes. Current support package for ST-A/PI is ST-A/PI 01M_CRM570.
> Should I update the stack to 24? or just update the ST-A/PI?
SAP always suggest to be on current support package. But I always prefer to upgrade to n-1 strategy.
Thanks
Sunny -
Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"
I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
Edited by: amirsd on Aug 3, 2011 5:53 PMHi,
Please check the below
1) ip/host entries should be in /etc/hosts
2) patch the latest kernel for 2008 R2
and re run installation
Regards,
Ram -
What are installations material for Solution Manager 7.0 EHP 1
hi friends,
we plan to do installing Solution Manager 7.0 ehp1,
can any help me to get the path for installation media for Solution Manager 7.0 EHP 1 in service market place.
thanks..https://service.sap.com/swdc
-> SAP Installations and Upgrades
-> Installations and Upgrades - Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 7.0 EHP 1
-> Installation and Upgrade
Also check https://service.sap.com/instguides for the install guide and SAP Note 1276022 - SAP Solution Manager 7.0 EHP1
Installation.
Nelis -
Kernel Update from 7.00 to 7.01 - SAP Solution Manager EHP1
Can anyone give me some information about update sap kernel?
How must I proceed?
Thanks!Login to service market place www.service.sap.com>downloads>supporpackages and patches>My company applicationsselect sap solution manager>SAP SOLUTION MANAGER 7.0 EHP 1>Entry by component>solution mangaer ABAP stack>select sap kernel 7.01 64 bit unicode-->select widows
server on X64bit>select database indendent>just scroll download you can see list of pathces select SAPEXE_23 which is the lates one and selet the check bot to add to download manager now select database dependant patch based on your database you have installed(Ex oracle or MS SQL)
select the same patch SAPEXEDB_23 and download the 2 patches through download manager
uncar the 2 patches throught sapcar command
sapcar -xvf <and give the patchnameSAPEXE......SAR>
sapcar -xvf <and give the patchnameSAPEXEDB......SAR>
Now take the backup of existing kernel
Drive:/usr/sap/SID/SYS/exe/uc
once the backup of kernel is finshed stops SAP and releated services
start>cmd>services.msc-->stop the service sap<SID_instance number> and saposcol service
now copy all the uncar newfiles to original run directory and replace all.If you face
problem like some service is still running then stop all the oracle services also and
try again.
Once all the files are copied then start the services and SAP
Let me know if needed more information
Regards
Uday -
Release Notes SAP Solution Manager 7.0 EhP1 - SP21 - SP23 available
Now available:
[Release Notes SAP Solution Manager 7.0 EHP 1 - SP 21-23|http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&_OBJECT=011000358700000528082010E]
The document is published in the following folder with "Technical Information":
[http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&]
SP23 includes several new functions in the area "Application Incident Management", which have been requested by VARs.
Regards, RuedigerPlease see also this detailed presentation:
[SAP Solution Manager SP23 - New Functions for VAR Partners|http://service.sap.com/~sapidb/011000358700000580432010E] -
Ticket SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0
Hi,
I want to migrate all tickets from SAP Solution Manager 7.0 to SAP EHP 1 for SAP Solution Manager 7.0 , please let me know the procedure how to migrate it.
DB Detail
SAP Solution Manager 7.0 - MSSQL( 9.00.4035)
SAP EHP 1 for SAP Solution Manager 7.0 - MSSQL(10.00.2531)
Thanks,
KaleelDear Mohamed,
I was reading the post and the replies and while I think your question has been answered, I just want to make sure what you are trying to achieve. Is it a migration, where you have one Solution Manager system on SAP Solution Manager 7.0 and another
SAP Solution Manager EHP1 system and you were looking to migrate the Service Desk messages?
If you are "Upgrading" one system from Solution Manager 7.0 to EHP1 then all the messages are preserved.
If you are "Migrating" to a physically different system, then transfer of Service Desk Messages is not supported.
Please see the document [SAP Solution Manger- Conent Transfer|https://websmp204.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000608232009E]
Also Service Desk is a completely independent CRM Service, so the messages could always be archived, as has been suggested.
No depending on your scenario, is the EHP1 system brand new or is it already productive? If it was brand new, you might be able to do a homogenous system copy, and then upgrade the new system to EHP1. But if it is already productive, this would not be an option.
Hope this helps to clarify.
Regards,
Paul -
SAP EHP 1 for SAP Solution Manager 7.0 configuration check
Hi All,
I have configured my SAP EHP 1 for SAP Solution Manager 7.0 according to the guide. Now i would like to test my configuration. Please provide me with a check list and test scenarios.SOLMAN_SETUP will guide you to setup SOLMAN, after you setup you gotta make sure that everything is green or resolve the errors.
SMSY---> Ssystem Check RFC Connections,check the SLDCHECK.
Refer to OPERATIONS GUIDE under INSTGUIDES, which is very detailed.
Thanks
SM -
Upgrade to SAP Solution Manager 3.2 to 7.0 EHP
Dear Experts
At present I am using SAP Solution manager 3.2. Now I am planing to update SAP Solution Manager 7.0.
I am some confutation in SAP Solution Manager 7.0 and SAP Solution Manager 7.0 EHP1,
what i do please help me.
Regards
Sanjay C.EHP1 is basically a product enhancement of 700 - i.e offers new functionality
Usually to get to Enhancement packages you need to be operating NW2004S stack based product - in this case 4.0 (now called Solution Manager 7.0)
I think this proposal will require first an upgrade from 3.2 to 4.0
then after applying Enhancement Package EHP1 and following pre-reqs for both steps
Also bearing in mind that Solution Manager is RFC dependant any change in SID, Hostname or client will require
all RFC connections will need to be adapted
There may also be special considerations depending on source configuration or the active Solution Manager scenarios and content
I would take a look at following PDF for reference - it may help in the initial 3.2-->4.0 upgrade
http://service.sap.com/~form/sapnet?_SHORTKEY=00200797470000090041&_SCENARIO=01100035870000000202&_OBJECT=011000358700000208052007E
Best wishes
Stuart -
Update SAP Solution Manager 7.0 to EHP 1 with SP 19
Hi!
We use SAP Solution Manager 7.0 (SP 17) on Linux with Oracle
and would like to update this system to EHP1 SP19.
First of all I installed ST-ETP Add-On via SAINT to call the system "Enteprise Edition"
Now I have few questions about the further procedure:
1) can this update from SP 17 --> SP 19 be implemented via SAINT and with one step?
2) what is the documentation of this process?
3) are there any restrictions about Linux and 32 Bit?
Thank you very much!
regardscheck this Note #1276022, it contains all crucial information you will need
-
Default User Parameters in SAP SOLUTION MANAGER 7.1
Hi,
I want some default parameters automatically be assigned to new users when they are created instead of manually adding every time in su01 transaction code. Do you know how to configure this?
SAP SOLUTION MANAGER 7.1
SAP_BASIS
702
0012
SAPKB70212
SAP Basis Component
I try settings in SSM_CUST for user-exit Z_USERS_TRANSFER and SAP_USERS_TRANSFER, but it's don't work.
Thank you.Code function module runs in SAP EHP 1 for SAP Solution Manager 7.0 SAP_BASIS 701.
In SAP SOLUTION MANAGER 7.1 SAP_BASIS 702 function module is ignored. it can be seen if you set a breakpoint in the function module.
FUNCTION CREATE_USER_HR_INFO.
*"*"Локальный интерфейс:
DATA: su01_mode(5) type c.
field-symbols: <BNAME> like USR02-BNAME.
field-symbols: <ACCNT> like BAPILOGOND-ACCNT.
field-symbols: <CLASS> like USLOGOND-CLASS.
field-symbols: <FUNCTION> like ADDR3_DATA-FUNCTION.
field-symbols: <DEPARTMENT> like ADDR3_DATA-DEPARTMENT.
field-symbols: <su01_mode> like su01_mode.
DATA hr_rfc TYPE STANDARD TABLE OF ZSTR_HR_PERSON_INFO WITH HEADER LINE. " инф-ция о польз-лях, получаемая из HR по RFC
DATA : sys_msg(80) TYPE c,
indx TYPE i.
DATA ADDRESS LIKE TABLE OF BAPIADDR3 WITH HEADER LINE.
DATA ADDRESSX LIKE TABLE OF BAPIADDR3X WITH HEADER LINE.
DATA DEFAULTS LIKE TABLE OF BAPIDEFAUL WITH HEADER LINE.
DATA DEFAULTSX LIKE TABLE OF BAPIDEFAX WITH HEADER LINE.
DATA LOGONDATA LIKE STANDARD TABLE OF BAPILOGOND WITH HEADER LINE.
DATA LOGONDATAX LIKE STANDARD TABLE OF BAPILOGONX WITH HEADER LINE.
DATA RETURN LIKE STANDARD TABLE OF BAPIRET2.
DATA res_lines TYPE i VALUE 0.
assign ('(SAPLSUU5)g_ok_start') to <su01_mode>.
if sy-subrc = 4.
exit.
ENDIF.
*<su01_mode> will have the following values: create = "CREA", change = "CHAN", and delete = "DELE"
* DATA mes TYPE string.
* mes = sy-subrc.
* CONCATENATE 'sy-subrc' mes into mes separated by SPACE .
* MESSAGE mes TYPE 'I'.
if <su01_mode> = 'CREA'.
assign ('(SAPLSUU5)USLOGOND-ACCNT') to <ACCNT>.
assign ('(SAPLSUU5)USR02-BNAME') to <BNAME>.
assign ('(SAPLSUU5)USLOGOND-CLASS') to <CLASS>.
assign ('(SAPLSUU5)ADDR3_DATA-FUNCTION') to <FUNCTION>.
assign ('(SAPLSUU5)ADDR3_DATA-DEPARTMENT') to <DEPARTMENT>.
hr_rfc-PERNR = <ACCNT>.
APPEND hr_rfc.
CALL FUNCTION 'GET_HR_PERSON_INFO' DESTINATION 'PHRCLNT200_HR'
TABLES
PERSON_INFO = hr_rfc
EXCEPTIONS
SYSTEM_FAILURE = 1 MESSAGE sys_msg
COMMUNICATION_FAILURE = 2 MESSAGE sys_msg
DESCRIBE TABLE hr_rfc LINES res_lines.
*если по табельному номеру нашлись данные - заполняю ими структуры
if res_lines > 0.
LOOP at hr_rfc.
DEFAULTS-KOSTL = hr_rfc-PLANS.
DEFAULTSX-KOSTL = 'X'.
if hr_rfc-GESCH = '1'.
ADDRESS-TITLE_P = 'Господин'.
else.
ADDRESS-TITLE_P = 'Госпожа'.
ENDIF.
SPLIT hr_rfc-ENAME AT space
INTO ADDRESS-LASTNAME
ADDRESS-FIRSTNAME
ADDRESS-MIDDLENAME.
if <FUNCTION> = ''.
ADDRESS-FUNCTION = hr_rfc-FUNCTION.
ELSE.
ADDRESS-FUNCTION = <FUNCTION>.
ENDIF.
if <DEPARTMENT> = ''.
ADDRESS-DEPARTMENT = hr_rfc-STEXT.
ELSE.
ADDRESS-DEPARTMENT = <DEPARTMENT>.
ENDIF.
ADDRESSX-TITLE_P = 'X'.
ADDRESSX-LASTNAME = 'X'.
ADDRESSX-FIRSTNAME = 'X'.
ADDRESSX-MIDDLENAME = 'X'.
ADDRESSX-FUNCTION = 'X'.
ADDRESSX-DEPARTMENT = 'X'.
ENDLOOP.
endif.
DEFAULTS-LANGU = 8.
DEFAULTS-DCPFM = 'Y'.
DEFAULTS-SPLD = 'LOCL'.
DEFAULTS-SPDB = 'G'.
DEFAULTS-SPDA = 'D'.
APPEND DEFAULTS to DEFAULTS.
DEFAULTSX-LANGU = 'X'.
DEFAULTSX-DCPFM = 'X'.
DEFAULTSX-SPLD = 'X'.
DEFAULTSX-SPDB = 'X'.
DEFAULTSX-SPDA = 'X'.
APPEND DEFAULTSX.
ADDRESS-NAMEFORMAT = '03'.
ADDRESS-NAMCOUNTRY = 'UA'.
APPEND ADDRESS to ADDRESS.
ADDRESSX-NAMEFORMAT = 'X'.
ADDRESSX-NAMCOUNTRY = 'X'.
APPEND ADDRESSX.
LOGONDATA-GLTGV = sy-datum.
LOGONDATA-GLTGB = '99991231'.
LOGONDATA-TZONE = 'EET'.
if <CLASS> = ''.
LOGONDATA-CLASS = 'END_USER'.
ELSE.
LOGONDATA-CLASS = <CLASS>.
ENDIF.
APPEND LOGONDATA.
LOGONDATAX-GLTGV = 'X'.
LOGONDATAX-GLTGB = 'X'.
LOGONDATAX-CLASS = 'X'.
LOGONDATAX-TZONE = 'X'.
APPEND LOGONDATAX.
CALL FUNCTION 'BAPI_USER_CHANGE'
EXPORTING
USERNAME = <BNAME>
ADDRESS = ADDRESS
ADDRESSX = ADDRESSX
DEFAULTS = DEFAULTS
DEFAULTSX = DEFAULTSX
LOGONDATA = LOGONDATA
LOGONDATAX = LOGONDATAX
TABLES
RETURN = RETURN
* DATA mes TYPE string.
* mes = sy-subrc.
* CONCATENATE 'sy-subrc' mes into mes separated by SPACE .
* MESSAGE mes TYPE 'I'.
ENDIF.
*ENDIF.
ENDFUNCTION. -
Install Enhancement Packages 1 on SAP Solution Manager server
Hi All
Anybody know if is it possible to install SAP Enhancement Package 1 on SAP Solution Manager 7.0?
There is a component named BBPCRM 500 SP12 stopped me to continue the installation via SAPEhpi.
Thanks before.
Best Regards,
HalomoanHi Halomoan,
BBPCRM 500 is part of Solution Manager 7.0 and 7.0+EHP1. But please check the update guide. It states that "SAP Solution Manager is updated to EHP 1 using transaction SAINT and Java Support Package Manager." So not via SAP Enhancement Package Installer as EHP for SAP Netweaver.
[SAP Enhancement Package 1 for SAP Solution Manager 7.0|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000718044&_SCENARIO=01100035870000000202&]
Regards,
Christoph -
Upgrade process to SAP Solution Manager 7.1
Hello!
We use SAP EHP 1 for SAP Solution Manager 7.0 (SPS 26) and plan to upgrade to the new SAP Solution Manager 7.1.
We currently do not have Java Stack there.
Some questions about Upgrade process
1) Can a direct Upgrade from SAP EHP 1 for SAP Solution Manager 7.0 (SPS 26) to SAP Solution Manager 7.1 be realized?
2) Should we first install Java Stack and then proceed with the Upgrade or otherwise?
3) Will Windows 32 Bit and None-Unicode Version of SAP Solution Solution Manager be supported?
It will be great to get some helpful information.
kind regardsHello!
Trying to answer your question
1) As described in note 1244225, there no restriction to upgrade the Solman EHP1 to solman 7.1. Refer to the section:
In case you do not participate in this current Solution Manager 7.1 beta shipment there are no restrictions for implementing now SP stack 25 and upgrading in the future to an equivilant SP stack of release 7.1."
2) The Solman EHP1 must always be a dual stack system, I am not sure, how you are running the Solman EHP1 without a Java Stack, you should have one.
3) I am not sure if there will be a Solman 7.1 32Bit Non-UNICODE version. But, SAP recommends to run Solution Manager on Unicode (see also customer letter on http://service.sap.com/Unicode). At solman EHP1 there are some issues when running the system as Non_UNICODE, refer note 1383407.
I am not sure if I could clarify all your doubts.
You may check the following URL:
http://service.sap.com/instguides
- SAP Components
- Solution Manager 7.1
As this is a very new software there is few documents in it, but soon you should see a upgrade guide here.
Regards,
Allam -
How to install Solution Manager 7.0 ehp 1 on Laptop
Dear Expert !
I have a laptop Sony Vio only support 32 bit, but I need install Solution Manager 7.0 EhP 1 on this laptop to test. So you can show me how to do that . I hope, you show me as soon as possible.
Thanks and Best Regards,
Tru HangTru Hang,
Even when 32 bit Solution Manager was supported, it is very doubtful your laptop would have the required memory or diskspace to install and run the system. You can see the system requirements in the SAP installation guides.
Hope this information was helpful.
Regards,
Paul -
How to copy SAP Solution Manager?
Hi experts,
I'm searching a manual, which explains a system copy for Solution Manager 7.0 EhP 1. I can't find such a document in the SAP Marketplace. Can anybody help me?
Thanks and best regards
MaxHello Max,
Please see the following URLs/Notes which will explain on system copy for SOLMAN.
http://www.service.sap.com/instguides
-> SAP Components -> SAP Solution Manager --> Select the relevant release and you will find installtion, upgrade
and configuration guides.
Please refer to the below link for more infromation.
http://service.sap.com/solutionmanager
Please also check if below notes:
659509 ORACLE: Special installation and system copy (point 3:Required documentation)
492051: Moving solutions to a new Solution Manager
Thanks,
Mark
Maybe you are looking for
-
Hi, We are using the Cross Tab component in Crystal Report XI and the cross tab have the sorting option as ascending, descending and specific order. The Sorting order will come from the query as an parameter, in that case how do we achieve the sort o
-
Having trouble connecting to Internet with my MacBook Air. It can be fine for a few hours thins goes off and all I get it the message couldn't connect due to time out error connection. It can't be my broadband because I don't have the same problem wi
-
How do you configure wmii using c++?
Hi, sorry for this newb question, but I searched online on google and I get nothing about this. I only see things about wmii and configuring it with Ruby. According to this: https://wiki.archlinux.org/index.php/Co - w_Managers wmii can be configured
-
Hi experts why we use set up tables in LO cockpit
please forward to my personal mail id [email protected]
-
Finder does not work on OS X Yosemite 10.3.3
After I upgraded the new OS X, I have found the Finder app have been showing the notice like the photo in above. Even I clicked the Reopen button, obviously it does not take any action or no response to show up the Finder window as well. Please give