SAP Source System showing up as BI Source System in RSA1

I have 2 BW systems and 2 CRM Systems. In one BW system, when I create a SAP Source system in RSA1, It gets listed as a SAP Sources system along with ECC and all the rest.
The Logicial Systems and RFC Connections all appear to be the same between each pair.
In the other system, using identical procedure, it the source system gets listed as a BI Source System. The 2 CRM systems have identical components and version levels as do the 2 BW systems.
Any idea why and if this would make any difference and how to correct.

Hi,
To fix this, you need to do a restore (& not a delete) of the source system in BW, having deleted the RSBASIDOC entry in the source OLTP system.
This will force the BW system to interrogate the RSBASIDOC table entry in the source system again and it should then realise that it is an R/3 system (not a BW system) and move the entry to the SAP folder.
Rgds,
Colum

Similar Messages

Whenever I connect to network from datacard. My system show as message "Restart your system.Hold the power button until system turn off"

I have purchased new MAC Book Pro recently. When connect to net using my datacard, net start's working after some time system fire a message saying that "Restart Your System. Hold power button until system turn off". I have configure network setting too even i am facing the problem.
Please suggest me were I am going wrong.
Bug Report Shown as :
Interval Since Last Panic Report: 12616 sec
Panics Since Last Report:          7
Anonymous UUID:                    947C5556-58AF-4B93-886D-6EDB24957F96
Wed May 25 19:55:50 2011
panic(cpu 3 caller 0xffffff80002d11f4): Kernel trap at 0xffffff80002c5330, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0x0000000000000008, CR3: 0x0000000000100000, CR4: 0x0000000000040660
RAX: 0xffffff800c5eac40, RBX: 0x0000000000000008, RCX: 0x0000000001000000, RDX: 0x0000000000000008
RSP: 0xffffff805f753cf0, RBP: 0xffffff805f753cf0, RSI: 0x0000000000000002, RDI: 0x0000000000000008
R8: 0x00000000418df000, R9: 0x0000000000000000, R10: 0x0000000000000000, R11: 0xffffff80004f4e5e
R12: 0x0000000000000008, R13: 0x0000000000000246, R14: 0xffffff805f753d10, R15: 0x0000000000000010
RFL: 0x0000000000010286, RIP: 0xffffff80002c5330, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 3), Frame : Return Address
0xffffff805f753990 : 0xffffff8000204d15
0xffffff805f753a90 : 0xffffff80002d11f4
0xffffff805f753be0 : 0xffffff80002e3f1a
0xffffff805f753bf0 : 0xffffff80002c5330
0xffffff805f753cf0 : 0xffffff80002503c8
0xffffff805f753d10 : 0xffffff7f80852d23
0xffffff805f753f20 : 0xffffff7f8085325c
0xffffff805f753fa0 : 0xffffff80002c84f7
      Kernel Extensions in backtrace (with dependencies):
         com.apple.iokit.IOSerialFamily(10.0.3)@0xffffff7f80850000->0xffffff7f80859fff
BSD process name corresponding to current thread: kernel_task
Mac OS version:
10J3210
Kernel version:
Darwin Kernel Version 10.7.1: Mon Jan 31 14:55:53 PST 2011; root:xnu-1504.10.48~4/RELEASE_X86_64
System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
System uptime in nanoseconds: 965216859070
unloaded kexts:
com.apple.filesystems.cd9660          1.4.1 (addr 0xffffff7f80f3c000, size 0x32768) - last unloaded 555132792378
loaded kexts:
com.ZTE.driver.ModemDriverMacEx          1.0.6d1
com.apple.driver.AppleHWSensor          1.9.3d0
com.apple.driver.AGPM          100.12.31
com.apple.filesystems.autofs          2.1.0
com.apple.driver.AppleMikeyHIDDriver          1.2.0
com.apple.driver.AppleHDA          2.0.2f9
com.apple.driver.AppleMikeyDriver          2.0.2f9
com.apple.driver.AudioAUUC          1.53
com.apple.driver.AppleUpstreamUserClient          3.5.3
com.apple.driver.AppleMCCSControl          1.0.17
com.apple.driver.SMCMotionSensor          3.0.1d2
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver          1.1.6
com.apple.driver.ACPI_SMC_PlatformPlugin          4.6.0d12
com.apple.driver.AppleLPC          1.5.1
com.apple.driver.AppleBacklight          170.0.43
com.apple.kext.AppleSMCLMU          1.5.2d6
com.apple.driver.AppleIntelHDGraphics          6.3.0
com.apple.driver.AppleIntelSNBGraphicsFB          6.3.0
com.apple.driver.AppleUSBTCButtons          201.2
com.apple.driver.AppleUSBTCKeyboard          201.2
com.apple.driver.AppleIRController          303.8
com.apple.BootCache          31
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.iokit.SCSITaskUserClient          2.6.6
com.apple.iokit.IOAHCIBlockStorage          1.6.3
com.apple.driver.AppleSDXC          1.0.2
com.apple.driver.AppleUSBHub          4.2.0
com.apple.driver.AppleSmartBatteryManager          160.0.0
com.apple.driver.AppleFWOHCI          4.7.3
com.apple.driver.AirPort.Brcm4331          429.10.1
com.apple.iokit.AppleBCM5701Ethernet          3.0.2b8
com.apple.driver.AppleEFINVRAM          1.4.0
com.apple.driver.AppleAHCIPort          2.1.6
com.apple.driver.AppleUSBEHCI          4.2.0
com.apple.driver.AppleACPIButtons          1.3.6
com.apple.driver.AppleRTC          1.3.1
com.apple.driver.AppleHPET          1.5
com.apple.driver.AppleSMBIOS          1.7
com.apple.driver.AppleACPIEC          1.3.6
com.apple.driver.AppleAPIC          1.4
com.apple.driver.AppleIntelCPUPowerManagementClient          142.4.0
com.apple.security.sandbox          1
com.apple.security.quarantine          0
com.apple.nke.applicationfirewall          2.1.11
com.apple.iokit.CHUDUtils          364
com.apple.iokit.CHUDProf          366
com.apple.driver.AppleIntelCPUPowerManagement          142.4.0
com.apple.nke.ppp          1.5 - last loaded 520102234363
com.apple.iokit.IOSCSIBlockCommandsDevice          2.6.6
com.apple.iokit.IOUSBMassStorageClass          2.6.6
com.apple.driver.AppleThunderboltDPOutAdapter          1.1.1
com.apple.driver.AppleThunderboltDPInAdapter          1.1.1
com.apple.driver.AppleThunderboltDPAdapterFamily          1.1.1
com.apple.driver.AppleThunderboltPCIDownAdapter          1.0.5
com.apple.driver.DspFuncLib          2.0.2f9
com.apple.driver.AppleProfileReadCounterAction          17
com.apple.driver.AppleProfileTimestampAction          10
com.apple.driver.AppleProfileThreadInfoAction          14
com.apple.driver.AppleProfileRegisterStateAction          10
com.apple.driver.AppleProfileKEventAction          10
com.apple.driver.AppleProfileCallstackAction          20
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.driver.AppleThunderboltNHI          1.1.9
com.apple.iokit.IOThunderboltFamily          1.2.2
com.apple.iokit.IOFireWireIP          2.0.3
com.apple.iokit.IOSurface          74.2
com.apple.iokit.IOBluetoothSerialManager          2.4.3f1
com.apple.iokit.IOSerialFamily          10.0.3
com.apple.iokit.IOAudioFamily          1.8.3fc2
com.apple.kext.OSvKernDSPLib          1.3
com.apple.driver.AppleHDAController          2.0.2f9
com.apple.iokit.IOHDAFamily          2.0.2f9
com.apple.iokit.AppleProfileFamily          41.4
com.apple.driver.IOPlatformPluginFamily          4.6.0d12
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.AppleBacklightExpert          1.0.0
com.apple.driver.AppleSMC          3.1.0d5
com.apple.iokit.IONDRVSupport          2.2
com.apple.iokit.IOGraphicsFamily          2.2
com.apple.driver.BroadcomUSBBluetoothHCIController          2.4.3f1
com.apple.driver.AppleUSBBluetoothHCIController          2.4.3f1
com.apple.iokit.IOBluetoothFamily          2.4.3f1
com.apple.driver.AppleUSBMultitouch          207.5
com.apple.iokit.IOUSBHIDDriver          4.2.0
com.apple.driver.AppleUSBMergeNub          4.2.0
com.apple.driver.AppleUSBComposite          3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice          2.6.6
com.apple.iokit.IOBDStorageFamily          1.6
com.apple.iokit.IODVDStorageFamily          1.6
com.apple.iokit.IOCDStorageFamily          1.6.1
com.apple.driver.XsanFilter          402.1
com.apple.iokit.IOAHCISerialATAPI          1.2.5
com.apple.iokit.IOSCSIArchitectureModelFamily          2.6.6
com.apple.iokit.IOUSBUserClient          4.2.0
com.apple.iokit.IOFireWireFamily          4.2.6
com.apple.iokit.IO80211Family          320.1
com.apple.iokit.IONetworkingFamily          1.10
com.apple.iokit.IOAHCIFamily          2.0.5
com.apple.iokit.IOUSBFamily          4.2.0
com.apple.driver.AppleEFIRuntime          1.4.0
com.apple.iokit.IOHIDFamily          1.6.6
com.apple.iokit.IOSMBusFamily          1.1
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          6
com.apple.iokit.CHUDKernLib          365
com.apple.driver.DiskImages          289
com.apple.iokit.IOStorageFamily          1.6.3
com.apple.driver.AppleACPIPlatform          1.3.6
com.apple.iokit.IOPCIFamily          2.6.1
com.apple.iokit.IOACPIFamily          1.3.0
Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.10.1)
Bluetooth: Version 2.4.3f1, 2 service, 19 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: MATSHITADVD-R   UJ-8A8
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3
Thanks,

I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card. I also was well aware that Apple offered a replacement program that ended in December of 2012. I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store. I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no. He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime. When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board. I asked myself, how can a flawed hard drive cause the screen to act funny.
nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses." I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it. I guess I will look into purchasing a new machine when I have the funds. Again...thank you both!

RSA1 - ECC 5.0 Backend "Source System" shows up as a BW System?????

Hello,
I'm working in RSA1 on my development BI system (BID) building a source system connection to our R/3 (ECC 5.0) (DEV) backend system. I've got the logical systems defined and assigned, clients opened, and users built.
Here's the issue:
When I build the connection to the backend ECC 5.0 system, it's coming up as a BIW system (see Message Test below - that' from the log)
My question is - is it seeing it as a BW System, versus an R/3 System, because in ECC 5.0 BIW is integrated / delivered within ECC 5.0?
Cut-and-paste from the log entry where
Message Text
Creating logical Business Information Warehouse on source system PRDCLT100

Hi Ajay,
I first click the scroll note button above "Display Node Log" then see the second message in the log below which says "Creating logical Business Information Warehouse on source system ........"
All messages there are status "green" i.e. informational versus warning or error..

Source File shows White Screen in Source + Program Monitor

Hello,
I'm having an issue with only one of three media files in my Premiere Pro CS6 project.
When I try to preview this one video file in the Source Monitor, it shows only a white screen, and I can only move the playhead to the beginning and end of the file. I then plopped the clip into the sequence to see if rendering it would give me better luck in the Program Monitor, yet to no avail. The file supposedly successfully rendered, yet when I open the subsequently created "Preview" file in VLC, the entire clip is completely white for its entire duration. (I think it's interesting to note that VLC plays the source file correctly, and that this footage has been successfully used in a separate project in Final Cut after converted to ProRes with Compressor.)
I've opened the file with GSpot to make sure I had the Codec installed, yet GSpot doesn't list any Codec information for this file. It only lists Container information.
(Screen shot of GSpot with white-screen issue in the background)
My Video Card drivers are up to date, taken directly from the chipset's manufacturer's website.
Codec: (See post below for Media Info dump)
Premiere Pro version 6.0.3 (001 (MC: 264587)), installed in English.
Sequence Settings: DVCPROHD 1080i50 default settings (framerate changed to 50FPS)
Windows 7 x64 Service Pack 1, English, 1440x900 32bit Color
Pentium(R) Dual-Core CPU T4200 @ 2.00 GHz
2GB RAM
Mobile Intel(R) 4 Series Express Chipset Family, Driver version 8.15.10.2869
53.2GB of free space on the SSD all of the media files, the operating system, the Adobe Premiere installation, and scratch disk is located.
I'm unsure of the camera used to record this footage.
Thanks for reading my post, and let me know if you need any more information.

General
ID                                       : 255 (0xFF)
Complete name                            : C:\Video Workspace\Source Media\VSB 01 Stand Bühnenkamera VORNE.mpeg
Format                                   : MPEG-TS
Commercial name                          : HDV 1080i
File size                                : 11.4 GiB
Duration                                 : 1h 0mn
Start time                               : UTC 2011-10-16 17:36:49
End time                                 : UTC 2011-10-16 18:37:17
Overall bit rate mode                    : Constant
Overall bit rate                         : 27.0 Mbps
Maximum Overall bit rate                 : 33.0 Mbps
Encoded date                             : UTC 2011-10-16 17:36:49
Video
ID                                       : 2064 (0x810)
Menu ID                                  : 100 (0x64)
Format                                   : MPEG Video
Commercial name                          : HDV 1080i
Format version                           : Version 2
Format profile                           : Main@High 1440
Format settings, BVOP                    : Yes
Format settings, Matrix                  : Custom
Format settings, GOP                     : M=3, N=12
Codec ID                                 : 2
Duration                                 : 1h 0mn
Bit rate                                 : 25.3 Mbps
Maximum bit rate                         : 25.0 Mbps
Width                                    : 1 440 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 25.000 fps
Standard                                 : Component
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Interlaced
Scan order                               : Top Field First
Compression mode                         : Lossy
Bits/(Pixel*Frame)                       : 0.650
Stream size                              : 10.7 GiB (94%)
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Audio
ID                                       : 2068 (0x814)
Menu ID                                  : 100 (0x64)
Format                                   : MPEG Audio
Format version                           : Version 1
Format profile                           : Layer 2
Codec ID                                 : 3
Duration                                 : 1h 0mn
Bit rate mode                            : Constant
Bit rate                                 : 384 Kbps
Channel(s)                               : 2 channels
Sampling rate                            : 48.0 KHz
Compression mode                         : Lossy
Delay relative to video                  : -40ms
Stream size                              : 166 MiB (1%)
Menu
ID                                       : 129 (0x81)
Menu ID                                  : 100 (0x64)
List                                     : 2064 (0x810) (MPEG Video) / 2068 (0x814) (MPEG Audio) / 2069 (0x815) () / 2065 (0x811) ()

System copy: RZ21 MTE has source SID and not the target SID

An system copy of PRD to QAS environment has been performed.
Since then receive the following message in the CCMS Monitor sets (trx RZ20):
Unable to determine the name of MTE class from <SID>\Background\...\SAP_SRT_COLLECTOR_FOR_MONITORIN or the message "Failed to determine MTE information for system QAS"
Checked and in the transaction RZ21 the MTE class is pointing to the PRD system and not to the QAS system:
RZ21 -> MTE-specific properties
Monitoring: Properties Assigned to MTEs
RZ21 -> Methods assigned to specific MTEs
Monitoring: Properties and Methods
Unable to determine the name of MTE class from PRD\Background\...\SAP_SRT_COLLECTOR_FOR_MONITORIN
I would expect here the value "QAS\Background\...\SAP_SRT_COLLECTOR_FOR_MONITORIN".
How can I adjust the MTE to check the QAS instead of the source system PRD ?

Received following answer from SAP:
we can find out the follow errors from the dev_disp developer trace file you attached.
ERROR => e=13 semop(1048668,(0,-1,4096),1)
(13: Permission denied) [semux.c 1196]
ERROR => CCMS: AlCreateAttachShm_AS : lock semaphore return 1
[alxxappl.c 665]
ERROR => CCMS: sAlInit: could not create/attach shared memory key 13(rtc = 1) [alxx.c 1187]
ERROR => AlDpAdmInit: sAlInit rtc = 1 [alxx.c 514]
ERROR => DpLoopInit: AlDpAdmInit [dpxxdisp.c 2033]
The shared memory area 13 is the one that is responsible for the alert area.
An error within that area could cause the problem that you are facing when opening monitoring trees.
If we look at your OS, we can see that the semaphore for this area is currently being held by the root user:
[1]ipcs | grep 1048668
s 1048668 0x00004e46 ra-r root system
You need to delete this area with root user using ipcrm and restart the instace or to reboot the OS and start the instance once again.
Performed these actions and the issue was solved.

ABAP source code to connect to third party systems using web service calls?

Hi all,
can any one provide an example ABAP source code to connect to third party systems using web service calls? The base system is CRM.

Do you want to call a web service in a remote system, or do you want to provide a web service?
If you want to call a web service you should create a proxy object via SE80. Open your development package, right click on the tree entry and choose: Create -> Enterprise Service / Web Service -> Proxy Object and provide the needed information (including the WSDL description file). You may then use the proxy object to call the web service (if the connection and everything else works right).
See [http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/9b/dad1ae3908ee44a5caf57e10918be9/content.htm]

Inconsistent Dev System: Infosource assigned to incorrect Source System

Hello all
Our Development box contains inconsistent assignments of infosources to source system.
When I compare the dev, quality and production boxes I find:
> Quality and Prod are consistent and all infosource systems are assigned to correct source systems - all loads execute as expected.
> However I find ips defined in the process chains in Quality and Production under incorrect source systems in the Development box.
> Also, the inconsistencies are varied for ex: SALESORG_ATTR is assigned to source system Y, while SALESORG_TEXT is assigned to source system X, while 0CUSTOMER_ATTR is assigned to source system Z ( where Z is the correct source system).
I have not been able to figure what lead to this inconsistency except that I am aware that there were plugins installed and some refreshes done followed up by BDLS.
I did try having BASIS execute BDLS to convert all logical systems X to Z ( but there were errors in the log stating that destination Z already exists - which is correct since for ex 0CUSTOMER_ATTR is assigned correctly to source system Z)
I was considering the following to rectify this situation:
1> Make the rectifications manually
1a> Identify all the infosources in all the process chains in quality/production
1b>Manually reassign all infsources/datasources to the right source system
1c>Check all the mapping rules (transfer rules) and ensure they are same as quality/production
1d> Activate the transfer rules
1e>Create infopackages
1f> Transport the ips to quality and reassign them to the process chains.
> This is a very labourious task and invovles high risk due to manual effort
2> Refresh from quality into dev
2a> Recreate the transport routes
2b> Resynchronize all the loads with the R3 dev box
> This would cause loss of version history and therefore not recommended by SAP
3> Rollback to a restore point
3a> We would need to find whether we maintain a restore point in the past before which the system were consistent.
3b> Reimport all the transports from the restore point till date
4> Rerun BDLS
4a> This might involve deleting all occurences of source system Z from the dev box
Please advise what would be the best approach / if theres a better way to address this issue.
Thankyou
Edited

Hi,
Goto RSA1 in yy BWQ system.
In the Menu ---> Tools ---> Mapping of Source System Names ( Shift + F6)
Change the Target Source System as BWP server.
Now move the transport to BWQ. Your BWP will be assigned as source system.
Regards,
Balaji V

System Image Utility not seeing Source Images.

Ok, so I've got 10.6 server running on a New MacPro. It runs amazingly, and I love it.
Trying to create a NetInstall service to deploy a bunch of Macs. Everything I've read says that I'll need an image of the Install, or a mounted disk that I need to create an image of. I have tried both of these scenarios and I cant seem to get anything to show up in the Sources section of System Image Utility.
I created my custom image on an Intel MacBook Pro, and it boots without any problem. I restarted the MBPro in target disk mode, connected it to the MacPro, and created a "New Image From Disk...." in disk utility, and still it does not show up in System Image Utility.
A stock Mac OS X install DVD in the drive shows up in the sources section, without any issue, but I really need to be able to install a customized build of the image.
So, here's my questions:
1) Can I create and deploy a custom 10.5 image from 10.6 server / System Image Utility II?
2) If so, How, or what am I doing wrong?
Desperate for help!
Any assistance is greatly appreciated.

I talked to Apple Support. It seems that 10.6 server can serve out 10.5< images, however each NetInstall image needs to be created with the corresponding version of System Image Utility. That is to say, if you want to create a 10.5 image to be deployed on SnowLeopard Server, you have to install 10.5.7 Server tools on a partition running 10.5, and create the image from there, then move the .nbi folder from that machine to the 10.6 server.
Trying it now, but it seems to be working already.
Thanks Apple Care guy!

Oracle Data Source not showing proposal fields

Hi, I need to create a DB Connect - Oracle Data Source. I go to the table / view matchcode, and I find the view we created for this data source, and in Proposal it doesn't bring any fields. I press the refresh button, and nothing happens.
Any idea what this could be??
Tanks in Advance
Manuel.-

HI
Change the data in the Flat file for Date field in the format YYYYMMDD. Then try viewing the Preview.
If it still shows error message like your system format does not match, Check the System date format, you can check in SU01-->defaults tab, change the data in the flat file with your system format and check.
Hope this helps,
Aparna Duvvuri

My ipod touch is not showing up on the source list

My iPod Touch is not showing up on the source list. I have tried to restore the ipod, i have uninstalled, reinstalled, and used the repair option in the control panel to no avail. I am currently useing the latest version of Windows 8 on an Asus VivoBook. What can i do to fix the problem?

Hello dbar2530,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Best of luck,
Mario

Why doesn't my apple tv show up in my source list on itunes?

I purchased a movie and then realized it didnt sync on my apple tv. So I go to my computer to see that the apple tv isn't listed in the sources. So far I have unplugged the apple tv, restarted it, restarted my computer, made sure all available updates have been downloaded, and also factory restored my apple tv.....still it doesn't show up.
So how do I get my apple tv to show up in my source list?

Troy McMeans wrote:
how do I get my apple tv to show up in my source list?
try the suggestions in this article.
JGG

Info Source 80FIGL_O06 is not defined in source system

Hi BW Experts,
When I am trying load data from ODS to Cube, I am getting a error messgae stating:
Info Source 80FIGL_O06 is not defined in source system
Error in Source system
This is an urgent issue. Please let me know if you have any suggestions...
Regards,
Reddy.

You can do this 2 ways. Right click on the ODS and say generate export datasource. The datasource will start with 8... and you can find that under Datamarts in RSA1-> Infosource. You can then create an infopackage and load from ODS through the update rules. You have the option of full load or delta load.
The other way you can go about this is again right click on the ODS and say update to data targets and just follow from there.
Did you follow the above steps? Where exactly is your problem?

Creating Source systems in two same logical BW systems from single R/3 sys

Hi All,
We are facing an issue while creating Source systems in two same logical BW systems, from single R/3 systems. Our Basis team is telling that if we want to connect the single R/3 system into 2 BW systems with same logical name, we will need to delete the source systems from one BW systems and create in another system. Also they told by doing so it will delete all the transfer rules and PSA table existing in the current BW system, which has the source system connectivity with the R3 system now.
Is this anyway to create the same source systems in two same logical BW systems, from single R/3 systems without deleting the transfer rules?. Also please help us to get anu OSS note or document explaining this in details.
Regards.
Muruganand.K

Hi Muruganand,
I dont think it is possible as connecting one R/3 Source System to two BW Systems.
If you could get the possible solution, please do reply to the post.
Regards,
Kiran

Data source 80BP_ID does not exists in source system

Hi All,
I have just started with standard content for SD module.
I activated my datasources 2lis_11_vaitm and 2lis_12_vcitm in my R3 system.
After replicating these data sources in my BI system i went to BI Content to activate my Info sources.
While installing info sources 2lis_11_vaitm and 2lis_12_vcitm i got errors namely
Data source 80BP_ID does not exists in source system
Datasource 80BP_REL not maintained.
Can somebody pls suggest a way out.
Thanks in advance..
Regards,
Rohit

Hi Rohit,
When ever you try to install the SD related Standard business content then it will automatically pick up the CRM related data. the 0BP_ID, these are related to the CRM.
Please uncheck the unrelated objects while installing the STD content.
you can select the option in the grouping as ONLY NECESSARY OBJECTS.
Regards,
Ravi Kanth

How to check how many source systems are connected to my BW system?

Hi friends
how to check how many source systems are connected to my BW system?
Regards
BN

Hi All,
Thanks a lot for your help. its resolved now with your help.
Regards
BN

SAP Source System showing up as BI Source System in RSA1

Similar Messages

Maybe you are looking for