SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI

Hi All,
We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
Regards,
Siva.

Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar

Similar Messages

  • Intel vPro AMT integration with SCCM 2012R2 - Issues with SCCM finding the "ConfigMgr AMT Web Server Certificate"

    Good evening all,
    I'm attempting to get Intel SCS integrated with SCCM 2012 R2 and I have both sides working, doing what they do best, however, I have issues when I try to mate the two. I started with a single server for the site and then tackled the Intel side with success,
    then I added another site server to run the Out of Band service point and Enrollment point. Up until this point I've had no issues with certificate templates, or issuance of those certs. 
    I have re-read the TechNet documents a few times regarding the PKI setup, some Intel documentation and three step by step articles and non of them seem to differ so I can't understand why I'm unable to choose my "ConfigMgr AMT Web Server Certificate"
    when configuring the Out of Band Management Component Properties page.  The "AMT web server certificate template:" dialog shows my CA FQDN and CA name, but the certificate template list is always blank.  I've tried this from both the remote
    and local ConfigMgr consoles.  The site servers have rights on the CA to manage and issue certs, is there something I'm missing that isn't in the documentation or buried somewhere that I missed?  Is there a Application policy that should be on the
    cert that isn't mentioned anywhere?
    Thanks in advance!
    Tesfaye

    Hi Joyce,
    Thanks for responding.  I pretty much have this error repeating in the log file and not much else:
    [28, PID:13388][05/21/2014 15:17:15] :System.DirectoryServices.DirectoryServicesCOMException\r\nThere is no such object on the server.
       at System.DirectoryServices.DirectoryEntry.Bind()
       at System.DirectoryServices.DirectoryEntry.get_AdsObject()
       at System.DirectoryServices.DirectorySearcher.FindAll(Boolean findMoreThanOne)
       at System.DirectoryServices.DirectorySearcher.FindAll()
       at Microsoft.ConfigurationManagement.AdminConsole.Common.ADUtils.EnumEnterpriseCACertificateTemplates(String domainEntryName, String certAuthorityFqdn, Boolean isServerAuthen)\r\n
    I will look into this, but another hint would be greatly appreciated!
    Thanks,
    Tesfaye

  • Windows Intergrated Authentication with reverse proxy issue with Safari

    Hi All
    I having a application which has Windows Integrated Authentication, for Internet users we are having a reverse proxy which has a IIS server which will authenticate using basic authentication then redirected to the actual application, every thing works as expected in IE and firefox but in safari there is a second login dialog box appears. When I did a packet capture using wireshark I noticed that in IE and FF the basic authentication which is carried forward to the actual application from IIS server but in Safari there is a NTLM negotiation in between because there is a 401 response so my application asks for on more login dialog. Dose any one knows why safari is behaving like this?
    Thanks & Regards
    Karthikeyan Vaithilingam

    I found a related post https://discussions.apple.com/thread/3274071?start=0&tstart=0. There is an issue with basic authentication and Http Redirect.

  • Having issues with music volume after syncing with iCloud, Having issues with music volume after syncing with iCloud

    Has anyone had issues with their music volume after syncing with iCloud ?

    There have been several posts here and on the iphone site about this.
    The jury is still out what the fix will be. Some posts say it's a problem with the metadata and the orientation data contained there-in. I can not confirm that.
    I do know that when I take a landscape screen snap, the orientation is wrong when I email or upload the photo to my computer.

  • IPhone 6 with iOS 8 Issues with Exchange Mail Header

    Multiple users report issues with Headers in the Apple Mail Client
    Condensed/Squished Text (in the Message Header)
    Blank Headers (in the Message Previews)
    Touch Calibration - Off by 2cm after attempting to interact with blank messages
    Has anyone else been experiencing these issues... any fixes?

    Did you find a solution for this problem yet?
    We are haveing the same problem where I work.
    Also using Exchange server and IOS devices.
    Are you using a VPN tunnel on the IOS devices?
    A few Days ago I had this problem on my own device (iPhone6, IOS8.3)
    I was Reading emails on my way to work.
    When I got to work and started the computer ONE of the emails was marked unread in Outlook.
    On the device it was marked as "read".
    One thing that I remember is that I had bad Connection at the time I was syncing emails and I got
    the popup message: "Can not get emails - Connection to server failed" (my translation from Swedish)
    I have a feeling that the error message and the problem with unread emails are connected somehow.
    Also, when I turn off the email account for my iPhone (to remove all emails) and turn it back on (reload all emails)
    the mail that was set as "read" is now "unread" again on my iPhone.
    This means (speculatinos) that sometimes the device mark emails as "read" but for some reason it does not
    tell the server that it is "read". So the server still Thinks that the email is "unread".

  • Photosmart D7160 connected to desktop with Windows XP, issues with new laptop & network printing

    We have a Photosmart D7160 connected to our desktop that runs Windows XP. I just got a new Acer laptop that runs Windows 7 (64bit). We set up a network to connect to the internet and so I can access documents that had been made on the desktop. I have not had issues using the printer off the desktop with any programs. I installed a creative program to create flyers, cards, etc onto the laptop. Same one as on the desktop. When trying to print off the laptop, I can not access the whole options on the printer. I forget the name of the options I want (maybe called printing preferences) but I would like to choose wether I am using the photo tray or presentation printing or economy printing, etc. I can only choose print.  That is not  good for printing cards, etc. I had made a recipe care template with that program and wanted to print one out.
    What have I not done in setting up my laptop? I tried the to "add a printer" on a network and that did not fix my issue. Any help is appreciated. thanks.

    Hi Bayratlj
    Dunno if you've sorted your problem out, but I had exactly the same problem with a HP Photosmart 3100. I found some advice on http://discussions.apple.com/thread.jspa?messageID=6201674 regarding the firewall on the Mac and yes that is the problem. But as you'll see with my last post in that topic I cant figure out how to keep my firewall on AND have printer sharing. Just allowing printer sharing in the firewall settings is no help.
    Cheers

  • Need help with startup Sync issue with Photoshop Elements 8.0

    When starting up Photoshop Elements 8.0 a brief dialog appears about sync space being filled up with options for Cancel or Proceed. This is then quickly covered up by the frame showing Survey/Show What's New/etc... cannot get back to dialog about sync space. Only way to get into the program is to click on the right arrows in the Welcome to Elements frame, start a tour, click right arrow until Go box is presented and then click on Go. Major PITA to do this. If we are quick, we can click on the initial dialog and click on Cancel or Proceed and get into the program without the covered up frame. We are running PSE8 on Windows 7.
    I have shut off sync and still this problem remains.I have been a loyal Adobe product user but this Automatic Sync stuff is really starting to get VERY irritating.
    Thanks for any help that can be provided.

    A lot of people are finding the same frustrations. Apparently PSE8 does not let you select start up with the Editor but forces the welcome screen on users. This is a classic case of Adobe not knowing what customers want and giving us what they think we want. It ignores the fact that the majority of users will have upgraded from earlier versions.
    You can make quick short cuts. If using windows right click on the desktop, select new short cut then browse to program files, Adobe Photoshop elements and scroll right down the list and click on Editor; then finish.
    You can do the same for the organizer and then launch each one independently.
    You need to think carefully whether you need to keep everything in sync with Photoshop.com. Several users have found problems when they have quickly used up their free storage capacity and then have to pay Adobe an upgrade fee just to continue using the program, otherwise they are locked out.

  • Creating interactive PDFs with page turn,issue with PDF

    I recently watch a video on adobe tv titled "indesign : creating interactive PDFs with page turn and flash animation". The video was great,simple to follow with great results, I was able to create a document with interactive page turns that was viewable in a web browser,the next step was to then create the same document but be able to view it in PDF format. I followed the above mentioned video and everything worked apart from one issue once I exported the indesign file out as an interactive PDF it opened up in adobe acrobat pro with no problem but when I went to turn the page it would lag and slow down to the point were it was almost impossible to turn the page, the page turning didn't seem to flow as well as when viewing it in a web browser. The document I am creating is a catalogue and I am happy with the interactive version for the web but I am looking at putting the catalogue on a CD/ USB and need it to open and work with PDF, it would be a great help if anyone could advise me on the reason why the interactive page turning runs so poor in PDF format. I am currently running on a very powerful computer with the adobe CS5 master suit.
    Any help would be much appreciated

    The page flipping is an SWF effect, so essentially you now have an entire SWF embedded inside a PDF.
    If you forget about this garish effect (which, I can guarantee you, by next year will be "so 2012") you can send out a standard PDF which can be easily viewed on otherwise sub-standard computers, and using very straightforward PDF readers, such as the ones currently available for the iPad and its clones.

  • Can anyone help with a compatibility issue with EZ vinyl/tape converter?

    I have been using EZ Vinyl/Tape Converter in conjunction with an ION turntable to transfer all my old vinyl into iTunes.
    I have had no problems until the latest version of iTunes was downloaded and installed.
    Now, if I attempt to import a track using EZ, it tries to import into iTunes for a couple of minutes, before giving me an error message which says "Make sure all active windows in iTunes are closed".
    I have no idea what this means, because I'm doing nothing any differently to what I've always done.
    Can anyone suggest what might have changed?
    Thanks in advance.
    Mel

    i have same problem too any suggestions anyone pls have so much music with vinyls to keep help

  • For all those with "BLANK SCREEN ISSUES" with MacBook Pro's....

    ...I suggest you direct all the issues you're having to Apple through the feedback form here:
    http://www.apple.com/feedback/macbookpro.html
    I for one have rang tech support twice now, had a go and the only response I got back was to go to that link, fill the form in and wait for response.
    State the problems you're having and post this link as reference:
    http://discussions.apple.com/thread.jspa?threadID=1478474
    Hopefully then Apple with acknowledge each of us.
    (PS. Apple people...DO NOT delete this post for being "off topic" because it most definately IS ON TOPIC!. Im trying to save people from calling tech support at their expense only to be told to fill in the feedback form.)

    veek wrote:
    MrWeatherbee wrote:
    stonecrest wrote:9.01 != 9.0-1
    Who are you directing that to?
    To you if I'm not mistaken...you upgraded to 9.0-1 via pacman,
    but the fix was in 9.01 not 9.0-1.
    If you read my post, I was responding to Vex who said 9.0[-1] fixed his issue. Knowing that 9.0[-1] != 9. 01 (and that the fix was in 9.01) , I told him it was weird that 9.0-1 fixed his problem (which is more polite than saying, "Bullsh*t!"), and I confirmed the weirdness by pointing out that the 9.0-1 upgrade I had performed earlier that morning did nothing for me (nor did I expect it to because the fix was in 9.01). Finally, I confirmed that building and installing 9.01 did the trick (as it was supposed to).
    I don't really think anybody was confused about 9.0-1 != 9.01. That's why I asked who Stonecrest was talking to. No big deal.

  • IPhoto 7.1.1 with Leopard Have Issues With Some Type 1 Postscript Fonts

    I was attempting to reprint a photo book created in iPhoto 7.1.1 that worked perfectly in 10.4.11 (Tiger). I had upgraded my G5 Tower Mac last week to Leopard and had run all the updaters—so my OS and associated files were up to date. Upon rendering the document during the checkout process, iPhoto crashed.
    After looking around in the forums for answers and finding no satisfactory solution, I did some detective work on my own. After each system/software tweak, I attempted to render the book as a PDF to disk, which is a similar function to when a book is rendered for printing through the iPhoto service.
    I reinstalled iLife and ran all the updaters. No luck.
    I removed font caches and restarted. No luck.
    I replaced some of the Type 1 fonts used in the book. Partial success.
    I replaced all the Type 1 fonts in the book with their OpenType counterparts. Bingo. PDF book created flawlessly.
    I haven't tried going through the online printing process yet, but it looks like it will be successful.
    So my questions are: Is Leopard breaking my old Type 1 fonts?
    Is this related to the general Acrobat printing issues others are having?
    Anyone else experiencing odd behavior with Type 1 fonts in iPhoto?

    Jeffrey:
    Welcome to the Apple Discussions. You've discovered on your own what Apple posted in this KB document: iPhoto: Book orders may get canceled if books contain Type 1 PostScript fonts.
    Happy Holidays
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • How to load XML file to table (non-XML) with SQL*Loader -- issue with nulls

    I have been attempting to use SQL*Loader to load an XML file into a "regular" Oracle table. All fields work fine, unless a null is encountered. The way that nulls are represented is shown below:
    <PAYLOAD>
    <FIELD1>ABCDEF</FIELD1>
    <FIELD2/>
    <FIELD3>123456</FIELD3>
    </PAYLOAD>
    In the above example, FIELD2 is a null field and that is the way it is presented. I have searched everywhere and have not found how I could code for this. The issue is that if FIELD2 is present, it is coded like: <FIELD2>SOMEDATA</FIELD2>, but the null is represented as <FIELD2/>. Here is a sample of the control file I am using to attempt the load -- very simplistic, but works fine when fields are present:
    load data
    infile 'testdata.xml' "str '<PAYLOAD>'"
    TRUNCATE
    into table DATA_FROM_XML
    FIELD1 ENCLOSED BY '<FIELD1>' AND '</FIELD1>',
    FIELD2 ENCLOSED BY '<FIELD2>' AND '</FIELD2>',
    FIELD3 ENCLOSED BY '<FIELD3>' AND '</FIELD3>')
    What do I need to do to account for the way that nulls are presented? I have tried everything I could glean from the web and the documentation and nothing has worked. Any help would be really appreciated.

    I hadn't even got that far. can you direct me to where the docs are to import data that is stored within xml but that you don't need any xml functionality, that just happens to be the format the data is stored in? thx

  • SAP Source System showing up as BI Source System in RSA1

    I have 2 BW systems and 2 CRM Systems.  In one BW system, when I create a SAP Source system in RSA1, It gets listed as a SAP Sources system along with ECC and all the rest.
    The Logicial Systems and RFC Connections all appear to be the same between each pair.
    In the other system, using identical procedure, it the source system gets listed as a BI Source System.  The 2 CRM systems have identical components and version levels as do the 2 BW systems.
    Any idea why and if this would make any difference and how to correct.

    Hi,
    To fix this, you need to do a restore (& not a delete) of the source system in BW, having deleted the RSBASIDOC entry in the source OLTP system.
    This will force the BW system to interrogate the RSBASIDOC table entry in the source system again and it should then realise that it is an R/3 system (not a BW system) and move the entry to the SAP folder.
    Rgds,
    Colum

  • BI4.0 with Baan ERP LN

    Hi,
    We are using BO3.1 for reporting against Baan V ERP. Now we are implementing Baan ERP LN (New version of Baan) for some sites.
    We have already migrated all Non Baan (other database/applications) reports to BI4.0 SP5 version.
    My question here is did any one tried to connect BI4.0 with Baan ERP LN ?. Is there is any new features are limitations?
    Please share your experience and idea's.
    Thanks...

    I have battled with INFO ERP, both with BAAN AND LN.
    Please list down the file system you are using and the storage vendor along with specs ? If you are using ZFS, you might wanna do some tuning at there.
    Most of the sql's with "hint" first rows should work fine except the "SALES ORDER ONE". You might wanna take out the hint and check the execution plan.
    Please list down all specific questions and i will try to answer them.
    Edited by: 962516 on Oct 1, 2012 6:19 PM

  • GUI Download Issue with Chinese characters

    Hello,
    Currently we are upgrading from 4.7 to ECC. I'm using GUI_DOWNLOAD
    function module to download the data from SAP to desktop. I do have an
    issue with Chinese characters while downloading the file from SAP to ECC.
    In 4.7 the Chinese characters are being downloaded (I haven't used any
    code page) perfectly, but where as in ECC the downloaded file has junk
    characters instead of Chinese.
    Is there any change in the GUI_UPLOAD FM.
    For your reference below is the code present in the program
      CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
        EXPORTING
          FILENAME             = Z_FILENAME
    *****DCDK900543 - Begin of fixing for Unicode conversion ****
         FILETYPE             = 'WK1'
          FILETYPE             = 'ASC'
          WRITE_FIELD_SEPARATOR = ABAP_TRUE
    *****DCDK900543 - End of fixing for Unicode conversion ****
        CHANGING
          DATA_TAB             = I_TAB_TMP
        EXCEPTIONS
          FILE_WRITE_ERROR     = 1
          NO_BATCH             = 2
          INVALID_TYPE         = 3
          UNKNOWN_ERROR        = 4
          OTHERS               = 5.
    Regards,
    Bharath.

    Hi bharat,
    please check whether you ecc 6.0 is uni coded or not (as you upgraded).
    If it is not uni coded then you will not be able to print the Chinese characters.
    You can see whether it is uni coded or not by the following
    in your app toolbar under system click on status.
    There you can see whether your ecc6.0 is uni coded or not.
    Regards,
    koolspy.

Maybe you are looking for