SAP Sourcing Wave

Hi All,
Waht dowe mean by wave in SAP sourcing like on demand wave 7, on demand wave 8 etc....Is it like SP what we have in SAP ERP
Alos in there any difference betweeen on demand and on premise soultion as far as configurations in concerned.
Thanks Venky

Hi Venky,
SAP is releasing two parallel versions for SAP Sourcing i.e. one for OnDemand and one for On Premises.
SAP Sourcing 5.1, SAP Sourcing 7.0 versions are On premises versions. Next On Premises version expecting in Q1/Q2 2012 is SAP Sourcing 9.0.
Where as Wave 6, Wave 7, Wave 8 versions are On demand versions of the product. Next On demand version is expected Q1/Q2 2012 is Wave 9.
Functionally there no much difference between SAP Sourcing 7.0 and Wave 7 but release cycles are little different between these two types of the systems.
On Demand versions are getting released every 6 to 8 months where as On Premises versions getting released in every 12 to 18 months.
regards,
Venkat

Similar Messages

Create SAP Source System Failed

Hi all,
We are using NetWeaver 2004s BI and try to connect to ECC 5.0. I tried to create SAP source system but got error message saying "RFC user logon failed". When I check RFC destination in ECC 5.0 for BI, the test connection is ok, but the remote logon will pop up another logon screen asking for id and password. I am pretty sure that the id and password in RFC destination is correct. The RFC destination in BI is ok. Can you help me out with this? Thanks a lot in advance.

Hi,
Check the Default Logon <b>Client</b> for ECC 5.0
and verifiy that the User is in the Same Client
Each RFC destination has a mapped user for specific Client..Check the Client and User in the same client
regards
Happy Tony
Message was edited by: Happy Tony

Data Reconciliation Node on SAP Source System

Hi Gurus,
I'm working on Data Reconciliation between SAP BI and SAP R3 systems. I've read on the forum that the reconciliation DataSource technology is available as of PI-BASIS 2005.1 / SAP NetWeaver 2004s. I'm using
SW Comp Release Level Highest Support Desc
PI_BASIS 2005_1_640 0017 SAPKIPYJ6H Basis Plug-In (PI_BASIS) 2005_1_640
I wonder that I cannot see the Data Reconciliation Node in the transaction RSA6 in the SAP Source System. Please throw some light on this whether I need to activate them.
Thanks & Regards,
Ash.

Hi Sunny,
Thanks for your response. Can you suggest me what should I do to get those DataSources? Are there any patches that SAP has released to overcome this problem for lower versions as the one which I'm using?
Thanks,
Ash.

SAP Sourcing 7.0 integration with SAP ERP - issue with SAP PI

Hi All,
We are integrating SAP Sourcing 7.0 with SAP ERP 6.0 with SAP PI 7.1 in middle. So the Sourcing will talk to PI and this intern will talk to ERP. Sourcing is on oracle 11g where as PI and ERP are on SQL 2008. All these 3 are on windows 2003 x64.
We are following the "Configuration Guide Integration of SAP ERP and SAP Sourcing 7.0" provided by SAP.
We have successfully configured Sourcing and PI systems as pe the document. In Sourcing, by using background jobs we are able to successfully generate files in "export" folder which is part of FTP directory.
However the issue is with PI, we configured the "configuration scenerio" in Integration builder and point all channels to the FTP folder in Sourcing. But PI is not picking up these files.
Is there any way to trigger this in PI system. Or do we need to do anything in sourcing itself.
Regards,
Siva.

Hello Siva,
I am thinking that you may need to deploy FTP adapter in PI to get this process work fine but not sure.
Let's see what other experts suggest.
Thanks,
Siva Kumar

Error in Creating a WebI Report on SAP Source using Rich client in BOxi 3.1

Hi
I tried to create a webi report using rich client on sap source. I get a error message " A Database error occured. the Database text is 'unable to connect to SAP BW server name and password is incorrect(repeat logon) (WIS 10901) .
SAP Integration kit installed
BO XI 3.1 is installed on windows server 2003
Application server - Tomcat 5.5 server.
Any configuration or sap files/folders should be added?
how can I move forward to solve it ?
Thanks!
J.M Raj

Hi
Ya I used SAP authentication - then also get same error.
Connections are created with username, password to access SAP Source
Thanks!
J>M>Raj
Edited by: John Milton on Jun 25, 2009 10:03 AM

Getting Error While Uploading Clause Document in SAP Sourcing 9.0

Hi,
--------------------system description--------------
SAP Sourcing 9.0
SAP NW7.31 AS JAVA
IBM DB2 9.7
I am getting error while executing clause document.
----------------------Error Description---------------
Login with buyer link into the system-> it has all authorizations
then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
Thanks and Regards,
Murtaza Najmi

Hi Gary,
it is standalone system i have, everything i have installed on one server.
i have already checked with restarting IIS server, and i can see word service while running url in contractgen.serviceurl, word service is running fine on browser but when i upload the document a popup window comes with error as i have shown above in my query
Thanks once again Gary for replying
Thanks and Regards,
Murtaza Najmi

Error when activate a SAP source system

Hello Experts,
I have an issue when I try to create a new SAP source system but I cannot complete this operation because a Timeout error occurs when the system made the destiny verification, the source system can be created but not activated, I already create the RFC connection and they are OK, I add the new logical system of the source system in the configuration (SBIW) in the general settings,and the data source tree is show succesfully and sems to work OK and the data sources seems to be OK too.
In the RSA1 transaction, go to source systems tree, choose the SAP source system called: "conexion a dev 200" -> right click and choose activate and the error occurs.
I have a Myself source system already created and activated, I cannot find the source of the problems thata cause the timeout error in the new source system.
Thank you vey much in advance,
Niurka

Yes, I try ti use the create automatically option first but it doesn't work, because says that we system already exists because here exist a myself source system with an RFC to R/# ( I don't know why), so I must use the manually creation option, I put the logical system, and all the requeriments of the screem. The system create the source system but when I try ti activate it, it is impossible to do it....!
I hope that you can give some tips or solution for this issue,
Thanks!

SAP Source System showing up as BI Source System in RSA1

I have 2 BW systems and 2 CRM Systems. In one BW system, when I create a SAP Source system in RSA1, It gets listed as a SAP Sources system along with ECC and all the rest.
The Logicial Systems and RFC Connections all appear to be the same between each pair.
In the other system, using identical procedure, it the source system gets listed as a BI Source System. The 2 CRM systems have identical components and version levels as do the 2 BW systems.
Any idea why and if this would make any difference and how to correct.

Hi,
To fix this, you need to do a restore (& not a delete) of the source system in BW, having deleted the RSBASIDOC entry in the source OLTP system.
This will force the BW system to interrogate the RSBASIDOC table entry in the source system again and it should then realise that it is an R/3 system (not a BW system) and move the entry to the SAP folder.
Rgds,
Colum

Message "Creation of DataSources for SAP source system is not permitted"

Hi,
I am in DW Workbench: Modeling and I need to copy a DataSource.
It's impossible, beacause I have this Message "Creation of DataSources for SAP source system is not permitted"!
What can I do?
Thks

Hii.
You can not copy the standard datasource to any other source system it will not allow you to do that.
But if you want to copy you can copy it to PC FILE source system.
It will allow you to copy there.
Right click in Datasource->Copy-> Give Target datasource name -
> intarget Source system tab -
>Give Source system for File.
Thanks
Mayank
Edited by: Mayank Chauhan on Sep 4, 2009 5:41 PM

SAP Source system creation in BI

Hi Gurus,
I am trying to create SAP source system in BI, The trying to create ALE REMOTE user in both systems.
What roles and profiles i need to assign to this user id. After creating user ids what steps i need to follow. Thanks.
Best Regards,
Suresh.

Hi,
To Create SAP Source System In BI:
-Click on Source System tab in RSA1.
-Then right click on the heading Source system and select Create.
-Select the first option Automatic. Create SAP System and continue filling the other details.
-This will create Source system automatically.
When you enter background user's password, sap system user name is modifiable, but the the BI user.
The background user of BI system, is defined in
RSA1 => Settings => Global Settings
<b>BW User ALE</b> field will have the name of the background user in BI.
If you are using ALEREMOTE as background user, make sure the same is maintained as BW User ALE.
regards,
Pruthvi R
Message was edited by:
Pruthvi R

Export 24 Bit Source WAV as 32 Bit Float Before Converting In Adobe Media Encoder?

Hi,
I'm exporting movies from After Effects as .avi and wondering what I need to do to preserve my audio as close to the source as possible. My source audio file is 24bit / 48K. I am using Adobe Media Encoder to encode the video/audio as YouTube Widescreen HD, but since After Effects doesn't offer 24bit export, should I export as 32bit float? And is this going to alter my audio in any way before it goes to Adobe Media Encoder?
I've read about this on some different forums, but am still not clear about it..
Thanks,
Henry

Hi Dave,
Thanks for your response. The issue that I'm running into with Adobe Premiere is that I've created "odd" frame rates in After Effects to sync my animations in "time" with my music. For this particular animation, the BPM of my music is 72.5, so I've used half of that, 36.25 FPS to perfectly line up my animation in After Effects. It locks right in with the BPM. I've tested this out on YouTube, where my videos are headed, and it works perfect. The problem is that Premiere is not using the source (After Effects) frame rate and and I have to choose from a set list of frame rates. Is Premiere limited to these frame rates? If that's the case, then I guess the only other option for me is to export from After Effects as 32bit float and test to see if their is even a difference from the source WAV. Most people are not going to be monitoring with high end D/A converters anyways, so it's probably not even going to make a difference. However, I have put a lot of work into this project and I want to deliver the best possible master.

System Type ERP not available while creating Buisness System For ECC in SAP Sourcing 9.0

Hi,
I need to import Master data in SAP Sourcing but when i am uploading master data i am getting this errror
Business system ECQCLNT340 does not match with local SAP Sourcing System ID SOURCING.
i have followed the steps in config guide of SAP ERP with SAP Sourcing.
when i am creating business system in SAP Sourcing system type ERP is not available.
i have also attached the error file, please check
--------------Version---------------
ECC 6.0 Ehp6
SAP Sourcing 9.0 on NW7.3 Ehp1 on IBM DB2
Thanks and Regards,
Murtaza Najmi

Thanks you Prasad,
this issue has been resolved and i have completed the installation part of SAP Sourcing and Contract generation.
Now , I am getting error while uploading clause document, my functional team member are not able to upload clause document. kindly suggest.
----------------------Error Description---------------
Login with buyer link into the system-> it has all authorizations
then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
Thanks and Regards,
Murtaza Najmi

Collaborators in SAP Sourcing 10.0 must not view RFx responses unless assigned as scoreres

Dear SAP Sourcing Specialists,
We are implementing SAP Sourcing 10.0 We assign collaborators on an RFx as
with the collaborator approver role before it is published, and these collaborators
review, edit and approve the RFx and then it is published to suppliers. After responses are received from suppliers and RFx is now in
Closed for Responses phase, we do not want these original collaborators to view the RFx responses unless they are assigned as scorers.
How do we achieve this? We tried to re-assign the Review collaborator role to these collaborators but they can still view RFx
responses.
Steps to reproduce the issue:
1.Create an RFx in SAP Sourcing 10
2. Assign collaborators with approval role
3. Collaborators approve RFx
4. Move RFx to Open for Responses
5. Suppliers respond to RFx
6. Rfx closes. RFx becomes "Closed for Responses"
7. Log in as one of the collaborators
8. We do not want the collaborator to view RFx responses unless assigned as a
scorerer
Kind regards
Pedzi

Why don't just use standard functionality in Page Customisations?
You can Hide/Unhide a Tab with Dimension Field <%USER_GROUP%> and Group Reference.
It's a clean, standard way and guaranteed to work and not break anything.
Bogdan Toma

How to change the value of COMPANY_NAME in "Subject:%COMPANY_NAME% Welcome to SAP Sourcing

Hi All,
Can some tell me How will I change the value of COMPANY_NAME which will reflect in subject of Final mail.
For more clear picture the subjectis"
Subject:%COMPANY_NAME% Welcome to SAP Sourcing .
The change vlaue of COMPANY_NAME should refleat in final subject of the mail.
Please help me in urgent.
Thanks
peeyush ranjan

Hello Peeyush,
Because I am unaware of your exact config, I'll try to provide a generic answer:
1. Go to Setup -> Mail Configurations
2. Identify the Mail Configuration for the Company you want to change
3. Click on the highlighted Company link
4. Change the highlighted Name:
Regards,
Bogdan

Mass upload of clauses in SAP Sourcing

Dear All,
Please let me know if we can do a mass uplod of clauses in SAP sourcing like we can do for the contract documents.
Requirement is customer wants to uplaod many number of clauses in clause library.
Thanks,
Vinay

Hi,
I havent done this myself and there is no such workbook for performing this function. There is however a template.csv available which can be used for mass uploading Clauses. Here is how you can retreive it:
Goto Setup > Import Data > Create> In the Upload Import File, select any sample .csv for upload in the picker field. Then in the Object type field select Clause. Make sure you check the Preview Import checkbox. After clicking next, you can see the template.csv available there.
Once you download the CSV to your local machine, you can see the fields available there are fill out with a few Clauses to see if this works for you. The process for importing the CSV will remain the same as for any other template. The only caveat I see is that sometimes users try and fix the Content options with a word document and that may not be achievable via this option.
Hope this helps,
Vikram

SAP Sourcing Wave

Similar Messages

Maybe you are looking for