SAP SP necessária para suportar os componentes para o SAP GRC NFE 1.0 no XI

oi,
Como estamos atualizando as nossas caixas de XI de SAP XI SAP PI 3.0 para 7,11, verificando o SLD notamos que Nota Fiscal componente de software está disponível. Assim, a pergunta é o que é que os Service Packs do sistema fonte precisa ter, a fim de fornecer todos os componentes necessários para a NF-e?
temos dois sistemas de fonte da qual enviamos os dados para XI, você pode sugerir o que é o pacote de serviços adequados para apoiar SAP GRC NFE 1.0 no XI
1> 6,0 SAP ECC, SP, 14
EHP 2, Nível 2
PI_Basis = 2005_1_700, Level 14
ST = PI 2008_1_700 Nível 2
2> 6,0 SAP ECC, EHP 4
Muito obrigado

Ola, vi o seu e-mail mas resolvi responder por aqui!
Na realidade, se voce for realmente trabalhar com o GRC, dependendo da secretaria da fazenda que voce ira trabalhar aconselhor que voce aplique o sp15 no grc, consule SAP Note 1487119, nessa nota haverao todos os procedimentos necessarios.
Como haviamos falado anteriormente por e-mail, seria necessario, caso vc realmente queira trabalhar com o GRC a aplicacao de algumas notas tecnicas no proprio GRC.
1477834     XML Layout Version 2.00: Missing parameters in NF-e BAdI
1487119     SAPK-10015INSLLNFE: Support Package 15 for SLL-NFE
1496216     Rejection of NFe because of wrong data type of date fields
1499921     Problem with validation after implementing SP15
1498700     Problem on signing NF-e
1497767     Fill field qTrib for new layout version 2.0
1500046     Upgrade validation rule for field ID for version 2.0
1500742     Adjust validation for field NADICAO and NSEQADIC layout 2.00
1501545     Problems in trying to see a XML in the IE
1502612     Select the NFe Status Check Service for Incoming B2B message
1502217     Extend validation rules for <DI>/<adi>, layout 2.00
Sem mais, precisando me mais ajuda avise

Similar Messages

  • Problemas para download do XML em massa no GRC NFe 10.0

    Boa tarde
    Fizemos o upgrade de versão do GRC 1.0 para 10.0 e entramos em Produção na segunda-feira, 19/02.
    Estamos tendo dificuldades para efetuar o dwonload em massa dos arquivos. Temos um programa Z que parou de funcionar e quando estamos indo pela opção do Menu
    WDY_APPLICATION - Download Archived XML nem todas as notas estão sendo exportadas
    Ex.: para um determinado CNPJ temos mais de 240 notas de saída aprovadas e só estamos conseguindo exportar 12 arquivos XML
    Alguém tem alguma idéia/dica para a solução?
    Temos que enviar os XMLs em atraso e fazendo o download individual está sendo inviável.
    Grata,
    Denise

    Olá Henrique
    Identificamos o problema através de debug da função /XNFE/OUTNFE_XML_MASS_DATA.
    O parâmetro de seleção está invertido. Se digitarmos o emissor no lugar do recebedor o programa funciona.
    É erro no standard. O curioso é que ninguém reportou esse erro. Não devem estar usando o programa de download em massa.
    De qualquer forma obrigada pela ajuda.
    Denise

  • An issue using the COM components supplied with SAP GUI 6.2 or 6.4

    We are having an issue using the COM components supplied with SAP GUI 6.2 or 6.4.  We used to have SAP 4.6c and now we have 5.0.  When we were on 4.6c, we used these COM components to logon and execute RFC calls and we had much success.  Now that we are on 5.0, we can’t seem to instance any SAP functions that have something to do with SAP Workflow.  We have experienced this problem when using VB6 or .NET, but our existing code that always worked is in VB 6.0.
    SAP Components used:
    o     SAP Logon Control
    o     SAP Function Control
    o     Librfc32.dll
    o     Other supporting C DLLs and/or COM object supplied with the SAP GUI installation.
    For example, if we want to call the RFC ARCHIV_CONNECTION_INSERT, this code fails in VB6 when the “Set objworkflow = objFuncCtrl.Add(strFunction)” line of code executes.  Instead of returning an instance of the object ARCHIV_CONNECTION_INSERT function, no object is created.  In 6.2, SAP raises no errors, but the object we are trying to create is still “Nothing”.  If we use 6.4, SAP raises an error “SAP data type not supported” via a message box and then the object is still = Nothing.  Interestingly enough, the 6.2 GUI COM controls don’t display the error dialog.  The message box that is shown comes from the SAP Function COM Object "SAP.Functions" (wdtfuncs.ocx).
    Now, what is interesting is if we use the same code to call a standard function or custom function that doesn’t have anything to do with SAP Workflow, then the code works fine.  Again, all of our code used to work just fine on an SAP 4.6 system.
    Here is the code that fails:
        'SAP Logon control - object for creating connections to an SAP system
        Dim objSAPLogonCtrl As Object
        'SAP connection object
        Dim objConnection As Object
        'Object that will represent the SAP function called
        Dim objSAP As Object
        'SAP function control object - object factory for creating other SAP function objects
        Dim objFuncCtrl As Object
        'Create instance of an SAP logon conrol
        Set objSAPLogonCtrl = CreateObject("SAP.Logoncontrol.1")
        'Create a connection object
        Set objConnection = objSAPLogonCtrl.NewConnection
        'Define connecion parameters
        objConnection.ApplicationServer = "sapvm"
        objConnection.SystemNumber = "00"
        objConnection.Client = "800"
        objConnection.User = "iissap"
        objConnection.Password = "tstadm"
        objConnection.Language = "E"
        objConnection.TraceLevel = 10
        'call the logon method of the connection object
        If objConnection.Logon(0, True) = False Then
            MsgBox Error
            Exit Sub
        End If
        'Create an instance of the SAP Function control object
        Set objFuncCtrl = CreateObject("SAP.Functions")
        'Set the function control connection object
        Set objFuncCtrl.Connection = objConnection
        'Function name to be generated and called
        Dim strFunction As String
        strFunction = <b>"ARCHIV_PROCESS_RFCINPUT"</b>
        'Create an instance of the function defined in strFunction
        Set objworkflow = objFuncCtrl.Add(strFunction)
        If objworkflow Is Nothing Then
            MsgBox "Could not create object " & strFunction
        Else
            MsgBox strFunction & " object created."
        End If
    If anyone has seen anything like this or has any ideas, please help!
    Mike and Hameed
    <b></b>

    Hi,
    documentation on the Scripting API is available at ftp://ftp.sap.com/pub/sapgui/win/640/scripting/docs/
    This API is a replacement of the existing, obsolete COM interfaces.
    Best regards,
    Christian

  • [Fl 8] Componentes para video en Flash

    Hola
    Estoy integrando unos videos en una pagina que he hecho en
    flash y estoy
    eligiendo el componente para controlarlo, de los que vienen
    por defecto con
    la aplicacion encuentro algunas carencias. Me piden que el
    video se pueda
    ampliar a pantalla completa, al igual que sucede en Youtube,
    pero no consigo
    encontrar un componente similar.
    Si alguien sabe donde puedo conseguirlo estare muy agracedido
    por la ayuda.
    A ver si hay alguna pagina con componentes de uso gratuito.
    :S
    un saludo
    Nely

    Yo opto por JW Mediaplayer también para los Mp3, aunque
    componentes para
    audio son más fáciles de encontrar.
    Un cordial saludo.
    "Nely" <[email protected]> escribió en el mensaje
    news:fgfl2g$8uf$[email protected]..
    > Muchas gracias Francisco esto es exactamente lo que
    buscaba. Ahora estoy
    > mirando algo similar para controlar mp3 sin necesidad de
    importarlos a
    > swf, creo que asi se escuchara en la mejor calidad. es
    así? o simplemente
    > importo la musica a flash y le dejo la calidad mp3. hay
    diferencias?
    >
    > saludos.
    >
    >
    > Nely
    >
    >
    >
    > "Fco. Moreno" <[email protected]>
    escribió en el mensaje
    > news:fga6as$mf9$[email protected]..
    >> Buenas tardes Nely.
    >> Te puede interesar El JW Mediaplayer
    >>
    http://www.jeroenwijering.com/?item=JW_Media_Player
    >> Que aunque no es un componente se puede integrar
    bastante bien dentro de
    >> las películas de flash y es gratuito,
    además de tener muchas opciones.
    >> soporta pantalla completa.
    >>
    >> Otras opciones son:
    >>
    http://www.flashloaded.com/flashcomponents/flvplayerpro/
    >>
    http://www.afcomponents.com/components/flv_player/
    >>
    http://www.flvplayer.com/components/FLV_Player.php
    >>
    http://demo.tufat.com/flvplayer/index.html
    >>
    >> Un saludo
    >>
    >> "Nely" <[email protected]> escribió en el
    mensaje
    >> news:fga57f$ku1$[email protected]..
    >>> Hola
    >>>
    >>> Estoy integrando unos videos en una pagina que
    he hecho en flash y estoy
    >>> eligiendo el componente para controlarlo, de los
    que vienen por defecto
    >>> con la aplicacion encuentro algunas carencias.
    Me piden que el video se
    >>> pueda ampliar a pantalla completa, al igual que
    sucede en Youtube, pero
    >>> no consigo encontrar un componente similar.
    >>> Si alguien sabe donde puedo conseguirlo estare
    muy agracedido por la
    >>> ayuda. A ver si hay alguna pagina con
    componentes de uso gratuito. :S
    >>>
    >>> un saludo
    >>>
    >>> Nely
    >>>
    >>
    >>
    >
    >

  • SAP GRC NFE não processa NFE's com itens que possuam diferentes alíquotas de IPI.

    SAP GRC NFE não processa NFE's com itens que possuam diferentes alíquotas de IPI.
    Alguém sabe se esse problema já foi resolvido ou conhece um contorno para essa situação ?
    Desde a implantação em junho de 2013 não conseguimos processar notas que possuem itens com diferentes aliquotas de IPI.

    Bom dia Fernando (que bom te encontrar aqui também :-)!
    Então, o Denny da SAP Alemanha me retornou dizendo que temos que instalar o XI Content SLL-NFE 10.0 e criar novamente os cenários da NF-e.
    Eu estou entrando em contato com o nosso Basis que fica em Lima para ver se é possível que ele instale este componente, para que eu crie novamente os cenários da NF-e (extensão _900).
    Após a recriação dos cenários, será que eu consigo reenviar as NF-e de teste novamente ou terei que estornar os documentos e fazer os processos novamente?
    Obrigado pela ajuda!
    Att.
    Daniel

  • SAP GRC NFE

    Hello,
    eu estou trabalhando no electronica fiscal de Nota. Nós temos seguintes sistemas: --
    SAP R/3 -
    SAP GRC NFE--JAVA (assinaturas digitais)-SAP NETWEAVER PI/XI -
    As AUTORIDADES (PARA A AUTORIZAÇÃO)
    como eu verificam a conexão entre estes sistemas. Como eu sei uma comunicação existe entre
    SAP GRC NFE--JAVA (assinaturas digitais)-SAP NETWEAVER PI/XI -
    A conexão das AUTORIDADES (PARA A AUTORIZAÇÃO)
    foi feita já com sucesso entre SAP R/3 E SAP GRC NFE através do RFC.
    Por favor ajuda.
    Agradecimentos adiantado,
    Honey

    Bom dia Honey,
    Além da comunicação entre os sistemas, você deve customizar as Sefaz-es e também os CNPJs na SPRO do GRC.
    Acompanhe as telas aqui:
    SAP GRC NFE 1.0 - New Solution Introduction & Implemention Best Practices
    Você pode testar o serviço assinador (java) diretamente pelo web service:
    Web Service Navigator
    Leonardo deu uma boa dica para testar o customizing dos serviços e comunicação com o sistema externo (Sefaz).
    Atenciosamente, Fernando Da Ró

  • We looking for sap xi installation in our office, how to approach with SAP

    we looking for sap xi installation in our office, how to approach with SAP Services.
    What are the uses of SAP Netweaver Platform Integration,can you give me the details of this and , from where  i can  get this one.
    And what are the components i need to buy ,plz any one of you send it to me.
    Thanks & Regards,
    priya reddy

    Hi barry,
    Thank you very much for u r  reply
    Thanks & Regards,
    priya reddy

  • Processo Standard de Archiving para GRC NFe Inbound

    Olá pessoal tudo bem?
        Mais uma vez gostaria de apoio para definir a melhor estratégia. Estou em um projeto de implementação do GRC NFe In com o SP16, o ambiente ainda não está pronto para customizações e testes porém algumas preocupações surgiram devido ao volume de XMLs recebidos. Dessa forma, gostaria de entender melhor a abrangência da solução Standard para archiving no GRC NFe in.
        Pelo que percebi, existem monitores específicos para administrar NFe e CTe arquivados (é necessario ativar o service na SICF)
    NF-e Fiscal Workplace for Archived NF-es
    CT-e Inbound Fiscal Workplace for Archived CT-es
        Porém tenho algumas dúvidas quanto ao funcionamento. Alguém já implementou essa funcionalidade, pode me ajudar a esclarecer o funcionamento?
    a) Pelos monitores acima, é possível visualizar e realizar o download dos documentos arquivados? Isso é importante em caso de auditoria...
    b) Hoje utilizamos o monitor "Download XML of NF-es / CT-es" para fazer download em massa de XMLs. Também será possível fazer o download em massa dos registros arquivados?
    c) As rotinas de arquivamento são as mesmas utilizadas no ECC? (SARA. SARI e etc).
    d) Existe alguma limitação para realizar download de documentos arquivados?
        Obrigado pela apoio....
    Abraço
    Edson

    Bom dia Edson,
    b) Sim ele também lê o archiving, inclusive se as estruturas do archiving não estiverem ativas ele fica dando uma mensagem para ativá-las (mesmo que não execute o archiving)
    c) Sim. Entra na SARA e procura pelos objetos de achiving com a mascara /XNFE/*
    d) A limitação é autorização e que o archiving esteja disponível para consulta.
    Atenciosamente, Fernando Da Rós

  • Nota fiscal send from R/3 to SAP GRC NFE

    Hello Everyone,
    We have send NFe from sap r/3 to sap grc nfe thru RFC . We cannot trace in GRC .
    What could be the possible error .
    please help.
    Honey

    Hi Honey,
    If configuration is correct on R/3 you can see the received data on tables /xnfe/nfehd (header), /xnfe/nfeit (item) and /xnfe/nfe_hist (history).
    A good approuch to you check what system is being called is put a break-point before R/3 call GRC on the end of function J_1B_NF_MAP_TO_XML or include LJ_1B_NFEF42.
    You can easily start debug on R/3 and follow inside GRC automatically when debugging, but the user of RFC need to be DIALOG and have debug rights. It's not possible do it with a service user.
    Check if the correct FM is being called /xnfe/nfe_create, for other messaging system the FM is J_1B_NFE_XML_OUT (if customizations is wrong you will check this error on ST22 on GRC).
    Kind regards, Fernando Da Ros

  • Connect from SAP gateway to RFC server failed - Java StandAlone app X SAP RAC System

    Dears,
    I'm developing a Java application (RFC SERVER) with JCo3 and I need to connect to SAP RAC system.
    I have configured the TCP/IP connection via transaction SM59, but when I try to start my server I face the error below (dev_jco_rfc.trc):
    ==========================================================================================
    **** Error file opened at 20140714 112024 Brasilia Time Rel 3.0.10 (2013-08-08) [720.440]
    Error:  >Mon Jul 14 11:20:24,636<    RfcException: [null]
        message: Connect from SAP gateway to RFC server failed
    Connection parameters: TYPE=A DEST=VSPAGUE ASHOST=cpe1601 SYSNR=01 SAPROUTER=/H/155.56.49.28 PCS=1
    LOCATION    SAP-Gateway on host ld7624.dmzwdf.sap.corp / sapgw01
    ERROR       hostname 'cpe1601' unknown
    TIME        Mon Jul 14 16:20:25 2014
    RELEASE     740
    COMPONENT   NI (network interface)
    VERSION     40
    RC          -2
    MODULE      /bas/740_REL/src/base/ni/nixxhl.cpp
    LINE        193
    DETAIL      NiHLGetNodeAddr: hostname cached as unknown
    COUNTER     3
        Return code: RFC_FAILURE(1)
        error group: 102
        key: RFC_ERROR_COMMUNICATION
    ==========================================================================================
    This problem happens when my app executes the line:
    JCoServer myServer = JCoServerFactory.getServer(myServerName);
    My system properties:
    jco.client.lang=EN
    jco.destination.peak_limit=10
    jco.client.client=800
    jco.client.passwd=********
    jco.client.user=********
    jco.client.sysnr=01
    jco.destination.pool_capacity=3
    jco.client.ashost=/H/155.56.49.28/H/cpe1601
    jco.server.connection_count=3
    jco.server.gwhost=/H/155.56.49.28/H/cpe1601
    jco.server.progid=VSPAGUE
    jco.server.gwserv=sapgw01
    jco.server.repository_destination=VSPAGUE
    Using SAP Logon i can connect to server cpe1601 system E16 without problems.
    Please, I really need some help, because my knowledge on SAP platform is minimum.

    Hi Markus,
    Changing ASHOST=ld7624.dmzwdf.sap.corp as you have suggested, I got the error message: Connect to SAP gateway failed ...
    As you could see, the host I'm connecting is from SAP RAC Service.
    Here in our company we have only SAP Logon and my RFC Application, and I can connect to SAP remote system via SAP Logon with this settings:
    System Connection Parameters
    Description: SAP ECC 6.0
    Application Server: cpe1601
    Instance Number: 01
    System ID: E16
    SAProuter String: /H/155.56.49.28/H/
    Below the connection information I received from SAP RAC SUPPORT for testing purposes:
        E16 System:
        SID: E16
        Client: 800
        System Number: 01
        Server: cpe1601
        Component Version: SAP ERP Central Component 6.0 Enhancement Pack 6 Suite on HANA
        User: ********
       Password: ********
       SAProuter String:
       If you don't plan to use SAPRouter at your end,
       /H/155.56.49.28/H/    

  • SAP Developer Edition?  Need development environment w/o buying SAP!

    Hi there,
    We're looking to work with a client who is running an SAP based system, and in advance of our next meeting in a month we have pledged to research the SAP platforms and how to interact with them.
    The client will be upgrading to SAP 6 in a couple of months so, due to both this and the fact that we have not been selected yet as the final candidate, interacting with their system is not an option.
    I have browsed SDN to see if there was a Developer Edition of the platform that we could use to test with, but couldn't find anything. Could anybody point me in the right direction for either a 'trial version' (though I know this is unlikely!) or even an open test system that we could connect to via VPN to test against... or any other ideas!
    Thanks in advance,
    Tom Groves
    [email protected]

    Thanks Mahesh... I think my brain may not have been working properly yesterday!
    I was wondering, as I am not familiar with SAP (yet!), if you could just help me determine which sneak preview I need to download from: https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/77317c8d-0701-0010-f093-ed35a427f559
    The client as far as I am aware is running version 4, but is shortly to upload to version 6 or something - this is to provide them with unicode support as they need to store Arabic and other languages.
    If I want to simply query the data stored in SAP and utilize various business methods from .NET will the "SAP NetWeaver J2EE Preview" suffice - this contains SAP NetWeaver Application Server and Developer Studio.
    Or do I need the Portal and hence have to download the Full Java Edition-Trial (or Full Java Edition2004s-Trial?!) as these contain the "SAP NetWeaver Portal with PDK."
    If we can get away with only downloading the SAP NetWeaver J2EE Preview then that's better as a) we're based in Dubai Media City and traffic costs are prohibitive here and b) it would be nice to have the files downloaded today instead of having to download >5GB!
    Sorry to act like a complete newbie on this, only heard of SAP yesterday, just want to get a platform up and running to test certain theories!
    Thanks for all your help,
    Tom

  • Como puedo hacer un boton para activar una casilla para firmar con tableta digitalizadora en un form

    Hola buenas tardes,
    me gustaria saber como puedo hacer un boton para activar una casilla para firmar con tableta digitalizadora en un formulario pdf,si es que es posible... Gracias de antemano
    Saludos,
    Eduardo

    Hola Carlos,
    Ante todo agradecerte siempre, tu atencion y ganas de encontrar solucion a mis cuestiones, por otro lado tambien disculparme por el tiempo que he tardado en responder, pero no he podido hacerloa antes.
    La idea es poder hacer un contrato que sea facil interactuar con él, ya que esta en varios idiomas y el nivel de la gente que maneja el programa, es basico. La cuestión sería hacer un boton en pie de la segunda pagina para que automaticamente hacer un accion para colocar la firma dibujada con la tableta digitalizadora(Funcion: -Firmar-->Dibujar firma) . nose si eso seria posible.Gracias de antemano
    Saludos,
    Eduardo

  • SAP ABAP -- Is it the right choice for entering into SAP Technology

    Hi
    I have 4 years experience in JAVA/J2EE. But I am planning to switch my career now to SAP. I am planning for doing course in SAP ABAP.
    Please anyone suggest me if SAP ABAP would be a right choice. And how is the demand in SAP ABAP at present.
    Can I explore myself in SAP ABAP at this point.
    Best Regards
    Ranjan

    Just out of curiosity - why switch to SAP in the first place?
    Yes, if you are good at programming, then yes ABAP is the way to go. But please remember that while searching for jobs you will still be considered a fresher - in ABAP. You JAVA background has very little - if not zero - significance when it comes to experience.
    Of course you can go ahead and explore the ABAP world. You can download the trial version from the site and start pulling a few levers to see if you are comfortable.
    pk

  • Components involved on SAP KERNELL

    Hi,
    I want to update the sap kernell. I always update with sapexe, and sapexedb(independent and dependent database), but I need to try to update the kernell, but the last release delivered it´s the 701_117.
    If I want to update I need to try with the package dw+disp package?
    SAP Note 19466 - Downloading SAP kernel patches
    More thanks

    Hello,
    Components of SAPEXE and SAPEXEDB are tested together.
    You can update a kernel component if it's newer than the component of SAPEXE or SAPEXEDB
    but there may be some unknown side effects.
    Component release date is no longer relevant in itself. Sometimes a newer dated SAPEXE
    or SAPEXEDB can contain an older component than a single component with an older release date.
    If you want to find out which version is newer you should check the file versions.
    Regards,
    Laszlo

  • Componente para e-commerce

    Existe alguma maneira de integrar um componente do Firefox ao desktop e site de e-commerce?
    A idéia era fazer o componente enviar fotos automaticamente para o site http://www.ecamisetas.com.br

    Hi Carl,
    While Muse can't do this directly, it's possible to embed third party widgets that can handle this type of functionality. I've seen users build complex forms using Wufoo (wufoo.com) where prices are calculated based on the options selected within the form. It's not nearly as powerful as what you would see on an automotive site for example (customizing a vehicle) however it might be enough to get you started.
    Best of luck!
    Steve Harris
    MuseThemes.com

Maybe you are looking for