SAP SRM 7.0 SP upgrade issue- unable to create SC

Hi All,
We are facing an issue in creating the SC after the support pack upgrade to SRM 7.0 SP12. When we create the shopping cart the system is unable to determine the source of supply for the shopping carts.
We have the classic scenario with backend ECC system in version 4.5B.
Kindly provide your inputs which could help me resolve this issue.
Many Thanks!

Hi Vipra,
Can you please login to the portal in SRM Administration and check the vendor details as below.
http://scn.sap.com/servlet/JiveServlet/showImage/102-57578-1-527011/18.png
http://scn.sap.com/servlet/JiveServlet/showImage/102-57578-1-527018/19.png
Best Regards,
Bharathi

Similar Messages

DS 5.2.4 Upgrade Issue - Unable to login to console

Hello! I have not been able to login to DS console after I have patched it to 5.2.4. I have found another thread with the same issue with solution https://forums.oracle.com/forums/thread.jspa?messageID=8517561 (add ldap library into runtime linking environment using crle) provided but I'm still unable to login to console after I applied the solution. Please kindly advise! Thank you.
[10/Apr/2012:18:59:52] info (21546): SunONE-WebServer-Enterprise/6.0SP3 B05/19/2004 02:48
[10/Apr/2012:18:59:52] info (21546): Access Host filter is: *.abc
[10/Apr/2012:18:59:52] info (21546): Access Address filter is: *
[10/Apr/2012:18:59:52] info (21547): Installing a new configuration
[10/Apr/2012:18:59:52] info (21547): [LS ls1] http://abc.com, port 390 ready to accept requests
[10/Apr/2012:18:59:52] info (21547): A new configuration was successfully installed
[10/Apr/2012:18:59:52] info (21547): Using the Java HotSpot(TM) Server VM v1.4.2_03 from Sun Microsystems Inc.
[10/Apr/2012:18:59:52] info (21547): Java VM classpath: /var/Sun/mps/bin/https/jar/NSServletLayer.jar:/var/Sun/mps/bin/https/jar/NSJavaUtil.jar:/var/Sun/mps/
bin/https/jar/NSJavaMiscUtil.jar:/var/Sun/mps/bin/https/jar/servlet.jar:/var/Sun/mps/bin/https/jar/servlet-2.3-filters-api.jar:/var/Sun/mps/bin/https/jar/jsp
engine.jar:/var/Sun/mps/java/ldapjdk.jar:/var/Sun/mps/java/jss311.jar:
[10/Apr/2012:18:59:52] info (21547): Loading IWSSessionManager by default.
[10/Apr/2012:18:59:52] info (21547): IWSSessionManager: Maximum number of sessions is 1000
[10/Apr/2012:19:00:05] failure (21547): for host ::ffff:x.x.x.xtrying to GET /admin-serv/authenticate, cgi-parse-output reports: the CGI program /var/S
un/mps/bin/admin/admin/bin/userauth did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal term
ination)
[10/Apr/2012:19:04:38] failure (21547): for host ::ffff:x.x.x.xtrying to GET /admin-serv/authenticate, cgi-parse-output reports: the CGI program /var/S
un/mps/bin/admin/admin/bin/userauth did not produce a valid header (program terminated without a valid CGI header. Check for core dump or other abnormal term
ination)
Edited by: Albert.C on Apr 11, 2012 10:37 AM
Edited by: Albert.C on Apr 11, 2012 10:39 AM

Hi anyone can advise me on this?

MOPZ issue :Unable to create new transaction

Hello All,
We have recently installed ECC6 EHP5 ready, and now want to apply the latest patches for it.
when I try to create new transaction from DSWP-->change Management -->Maintenance Optimizer -->Crete new trasaction it is throwing an error .
I have sufficient authorizations from both ends (solmon system and to my s-user)
Solmon roles -->YY(SOLMAN_BASIS_MAINTAIN)
                            YY(SOLMAN_DSWP_ADMIN)
                            YY(SOLMAN_ISSUE_MGMT_MAIN)
                            YY(SOLMAN_LANDSCAPE_MAIN)
S-User Roles --> Maintain System Data Authorizations
System Details:
EHP1 SOLMON 7.0
AIX5.3/ORACLE 10g
Can any one guide me what is the exact problem and how to avoid the same.
ERROR Log from the dump raised
A RAISE statement in the program "CL_SM_DATA_SENDER_RFC=========CP" raised the
exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
url level error log which showed on the browser
Error when processing your request
What has happened?
The URL http://ussappsm00.corpnet2.com:8055/sap/bc/webdynpro/sap/wda_mopz_plan was not called due to an error.
Note
The following error text was processed in the system PSM : Exception condition "NOT_FOUND" raised.
The error occurred on the application server ussappsm00_PSM_55 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_DESTINATION of program CL_SM_DATA_SENDER_RFC=========CP
Method: GET_ASSIGNED_SUSERS of program CL_MO_SMP_ADAPTER=============CP
Method: LOAD_SHORT_TEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: LOAD_CONTEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: IF_COMPONENTCONTROLLER~LOAD_CONTEXT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: HANDLEDEFAULT of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/LSBW1CHLCWA0SWHM02KO==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
Method: NAVIGATE of program CL_WDR_CLIENT_APPLICATION=====CP
Method: DO_NAVIGATION of program CL_WDR_WINDOW_PHASE_MODEL=====CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system PSM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server ussappsm00_PSM_55 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server ussappsm00_PSM_55 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 800 -u: RRD42469 -l: E -s: PSM -i: ussappsm00_PSM_55 -w: 0 -d: 20110715 -t: 041437 -v: RABAX_STATE -e: RAISE_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Awaiting your response.
Best Regards
Rakesh

Hi,
You will need the standard SAP Change Management work center role assigned to you. If custom role it should be derived from this role SAP_SMWORK_CHANGE_MAN
Regards,
Srikishan

SAP* or DDIC being unable to create logical system in SAP PI 7.1

greetings !
I am not a basis person.
I had freshly installed PI 7.1. I was finding that I am being unable to create new logical systems . I tried logging to both clients 000 and 001 using sap* , ddic , and pisuper . pisuper does not even have the authorization to execute SALE . SAP* and DDIC can excecute SALE but unable to create or assign clients.
I reinstalled my system from scratch thinking i must have errored on something, as creating clients is a very simple task. but even the new PI 7.1 gives me the same problem.
is something wrong with my installation , or there are additional roles/authrizations I need to assign to a user.
regards
rishi

Besides PISUPER other users are also created some of the are PIAFUSER, PIDIRUSER, PIRWBUSER etc. Every user has a specific purpose in a PI system. For activities like creating logical system etc. own id's should be used.
There are couple of guides out there which explains in detail the purpose of all the users in PI system.
Hope this helps.
Thanks,
Naveed

FTP error-Unable to create new pooled resource: com.sap.aii.adapter.file.ft

Hi,
We have a scenario where XI receives a Idoc and based on the contents of Idoc, It will generate 5 different files and send it to the external FTP server.We configured 5 receiver channels for these 5 files.
When this interface runs, most of the files will be delivered but some of the messages will be errored out.
The receiver channel has shown the following error-
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: com.sap.aii.adapter.file.ftp.FTPEx
I tried to resend them by temperorily stopping other channels to reduce connections to this FTP server.But these messages again resulted with same error.
Can someone suggest what might be the cause for this error.
Thanks in advance.

Hi ,
As I am not sure about the problem so U just try all of the option I am writing below. It may help u as these are the probable solutions for this problem.
1.perform Full CPA cache refresh using PIDIRUSER
2.The problem seems to be in establishing the connection with the File server . This could be due to
a. Wrong user name or password in receiver adapter .
b. Firewall connection are not open
actually you are saying that some files are being delivered so all the file has to be deliverd on same server on diffrent directory or all files are going on diffrent server at present I am assuming that all files are going on diffrent server so please check UID & PWD properly.if they are on same server but diff. directory it can be easily done using one Communication channel only.
3. Finally please check the errorneous communication channel .
to check your communication channels are working fine or not you can check in channel monitoring in PI7.0, adapter monitoring in Xi3.0.
if you are on PI7.0, goto RWBCache monitoring select AE and cilck disply-select the date todays--check everything is greent here
4.Please check your maximal connection pool .
Regards,
Saurabh

Unable to create a socket

We are trying to receive an XML file from a partner (with SSL) through our PI system. About half of the files we receive during the day succeed normally. The other half fail with the following messages:
In CC monitor:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: unable to create a socket: java.io.IOException: unable to create a socket
SOAP: call failed: java.io.IOException: unable to create a socket
and in SXMB_MONI
com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket
Does anyone know why this could be happening to only some of the files and not others when all other things are the same?

Hi Blake Haan,
I faced some times this issue.As of my analysis, It is various downtimes from your target system or error in your server. So might be that reason,These type of exceptions are came.
My suggestion is please resend these message from RWB-->Message Monitoring, Before that please check with your target sever support persons.
And please take some time to resend it those messages which are failed.
Thanks,
Sateesh

DeliveryException: unable to create a socket

Hi,
We are using the Proxy-> XI -> SOAP scenario(Synchronus). I am able to see that the request message mapping has transformed the message in to the required format. But, when it is calling the SOAP adapter it is giving com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket error. Can any one help us in knowing
what exactly is the problem. We have used 'Do not use SOAP envelop' option in the SOAP receiver adapter.
Thanks And Regards
Sripathi G Yogesh

hi,
you can refer to thread for your issue
Re: SOAP Adapter: java.io.IOException: unable to create a socket
regards,
ujjwal kumar

File Adapter - FTP - Unable to Create new pooled resource

Hi Friends,
I am getting the following error while using file adapter with FTP protocol...
Attempt to process file failed with Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error Exception caught by adapter framework: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed
Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Error when getting an FTP connection from connection pool: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: FTPEx: PASS command failed.
Can someone help me to solve this probelm..
Regards,
Shyam.

Hi,
Try to check the directory you have specified in the CC and also check whether you are able to connect to the FTP server with those login credential and access the directory specified.
Also let me know whether it is working fine for other scenario's or not.
Regards,
Nithiyanandam

SOAP Receiver Adapter: DeliveryException: unable to create a socket

Hi all,
I have a RFC <-> XI <-> SOAP scenario, using HTTPS and I found this exeption (RW):
Received XI System Error. ErrorCode: GENERAL ErrorText: com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket ErrorStack:
Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket.
Transmitting the message using connection http://<hostname>:<portname>/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket.
The message status set to FAIL.
Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: unable to create a socket.
Thanks in advance,
Daniela

Hi,
did you enable SSL?
http://help.sap.com/saphelp_nw04/helpdata/en/14/ef2940cbf2195de10000000a1550b0/content.htm
Regards,
michal

SAP SRM Prod with Oracle DB and AIX 5.3 Performance Issue.

Hi Basis Gurus,
Today my SAP PRD system all of a sudden was running slow and users had difficulties executing TCodes as it took minutes before the screen appeared.My system is SAP SRM 4.00, Oracle Release 11.2.0.1.0 and AIX 5.3.
From Basis point of view , we noticed that all the work process were hanged due to RFCs' occupying it.Couldnt investigate further on the system as we needed to restart asap because users needed to log on. A quick check on SICK shows no errors.What we managed to find out is that we needed to check this parameter below and set it accordingly:-
rdisp/rfc_min_wait_dia_wp:-
Definition
Number of work processes kept free for other users.
Use
This parameter is used to reserve a number of dialog work processes for dialog mode. It prevents parallel RFCs from occupying all the processes.
The parameter rdisp/wp_no_dia specifies the absolute number of dialog work processes.
Unit: number of dialog work processes
Default value: 1
Example
If 10 dialog work processes are configured for the instance (rdisp/wp_no_dia = 10) and the parameter rdisp/rfc_min_wait_dia_wp = 3 is set, parallel RFCs can occupy a maximun of 7 dialog work processes. Three dialog work processes always remain free for dialog mode.
There are 20 DIA processes in our system, perhaps reserving a minimum of about 5 work processes for DIA users will be useful via the parameter.
So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
When we went for a restart of the system we encountered another issue. Steps to the issue are as below:-
1) Did a proper shutdown of Oracle and SAP.
2) When we start using startsap script, it doesn't start DB so we started DB manually but listener was having problem
    so we stopped all.
3) We also did a cleanipc, it too throws below error:-
sidadm> cleanipc <systemno> remove
               exec(): 0509-036 Cannot load program cleanipc because of the following errors:
               0509-130 Symbol resolution failed for cleanipc because:
               0509-136   Symbol memmove (number 106) is not exported from
               dependent module /usr/sap/sid/SYS/exe/run/libsapu16.so.
               0509-192 Examine .loader section symbols with the
               'dump -Tv' command.
4) Also the Listener file has no contents,it's null file.
5) This is another error :-
    exec(): 0509-036 Cannot load program /oracle/sid/112_64/bin/tnslsnr because of the following errors:
    0509-150   Dependent module /oracle/sid/112_64/lib/libttsh11.so could not be loaded.
    0509-101   The module has too many section headers
    or the file is damaged
The libttsh11.so file was empty dated 25th timestamp as below in PRD:-
-rw-rr    1 sid   dba               0 Nov 25 07:12 libttsh11.so
Further checking has let me to understand this is an Oracle Bug from this link:-
http://gavinsoorma.com/2009/12/11-1-0-6-clusterware-upgrade-to-11-1-0-7/
This Oracle bug only happens in an Upgrade time and how could this happen to my Production system during a restart process.
Also this system was restarted during the last weekend's maintainance window and it came up with no issues.
6) We copied over the libttsh11.so from our QA environment to PRD and did a Startup:-
-rwxr-x---    1 sid   dba        65967496 Nov 25 07:40 libttsh11.so (This is the copied over file from QA)
7) After Startup everything has been in order till now.
My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before. Hope all the Gurus here could shed some light into my 2 questions as I am looking for positive answers.
Thank you.
Regards,
John

Hi,
Firstly I would suggest you to upgrade your database from Oracle Release 11.2.0.1.0 to Oracle Release 11.2.0.2 . This is the recommended Oracle 11g database version for SAP solutions. Many of your problem will get resolved with it.
Question 1:
So my first question would be is there any other suggestions besides adjusting the mentioned parameter above in order to ensure that no work processors going into hang state due to RFCs' occupying it as this issue always happens at the end of the month only when there are massive users accessing it.
For immediate resolution the approach you have followed is correct viz limiting number of dialog processes for RFC. Secondly you need to analyze why RFC processing takes so much time. You need check which programs are getting executed by those RFC.
Generate EarlyWatch report for more detailed view
Question 2:
My second question is what went wrong with the libttsh11.so file. How could it be 0 size in PRD when no signs of changes had happen to the PRD system. Is this a proven Oracle Bug or something else since I have never encountered anything like this before.
The libttsh11.so library cannot be found in the related directory.
Cause
The file system is mounted using CIO option, but per Note 257338.1 Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L, an ORACLE_HOME on a filesystem mounted with "cio" option is not supported.
Such a configuration will cause, installation, relinking and other unexpected problems.
Solution
Disable the CIO option on the filesystem.
References
NOTE:257338.1 - Direct I/O (DIO) and Concurrent I/O (CIO) on AIX 5L
Hope this helps.
Regards,
Deepak Kori

SAP ECC 6.0 service pack level upgrade from 15 to 18 impact on SAP SRM 5.0

Hi All,
What all needs to be tested in SAP SRM when we upgrade SAP ECC6.0 service pack level from 15 to a8.
I am already facing issue in BBPGET VD and HR Interface with SAP SRM.Workflow issue while testing in EBQ.
Kindly let me know is anythings needs to be tested.
Regards
Vivek.

Hello,
There are no known issues related to ECC 6.0 support package upgrade when this system is integrated with SRM 5.0.
Since SRM 5.0 is fully supported with ECC 6.0.
Regards,
Ricardo

Custom fields in webdynpro SRM 7.0 while upgrade from SRM 5.0

Hi Experts,
We are upgrading from SRM 5.0 to 7.0. We created 2 custom fields using configure field control in Meta data handling (SPRO) and enabled them for visibility. When we tried to see these two custom fields, they didnt appear in the web dynpro component.
Web dynpro details are below.
Webdynpro: /SAPSRM/WDC_UI_DO_ACC
Window : IV_L_FPC_CA_DETAILS
view : V_DO_ACCOUNT_DETAIL
Field : zzXXXX
We have to manipulate the data of those fields.
Since we couldn't see those fields, unable access the data. Could you pls suggest what was the solution you found for your issue.
Thanks
Dhivya

Hi,
Please check the Meta configuration on which set key you configured.
you have to configure the fields as show in the below link for accounting.You have to use set key as 31 for accounting.
http://wiki.sdn.sap.com/wiki/display/SRM/CustomerAccountFieldsatDefaultsettingsonShoppingCart
Regards
Devi prasad

SOAP unable to create a socket after OS upgrade OS/400 V5R4 to V7R1

Hello,
after we upgraded our OS from System i V5R4 to V7R1 we have problems with our SOAP adapters.
In the runtime workbench and also in the SXMB_MONI the following error occured:
SOAP: call failed: java.io.IOException: unable to create a socket
Message-Verarbeitung fehlgeschlagen. Grund: com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.io.IOException: unable to create a socket
Before the OS upgrade the adapter rans without any errors and we tested the connection to the partner
with an system running V5R4 with success. So it seems to be an error that came with the OS upgrade.
Any idea? Had any one the same error after migration to V7R1? Thanks for your help.
Best regards,
Matthias

Hello,
we found out that the error is attached to DNS and Java stack. Our ABAP stack can set the url to the correct IP adress, if we configure a entry in SM59. Also the java stack calls our partner over SOAP with IP adress, but not with url. The urls are stored in the local host table, so we suppose that the java stack doesn't use the local dns table and doesn't ask our dns server for the right ip adress.
Does anybody know this issue? The only change we did is upgrade OS/400 from V4R4 to V7R1. If a mod see this, I think it make sence to move this thread into the forum SAP on DB2 UDB for i5/OS (DB4). Thank's.
Matthias

10.2.0.2 Patch Upgrade issue

hi,
SAP was installed on 10.2.0.1 (SuSe Linux Ent 10 ) . now i am applying patch upgrade to 10.2.0.2. when i am doing patch the below problem was occured,
"Unable to create new central inventory at location /oracle/orainventory. A non empty inventory already exists at this location. Please select another location or clean the inventory at /oracle/orainventory."
please help me on this issue
Regards
Ramesh

Hai,
Please check the oraInst.loc file has the correct entry or not.
File oraInst.loc should have the entries similar to the below:
inventory_loc=/oracle/SID/oraInventory
inst_group=dba
Check the permissions of this file as well, atleast the file should have read access to others.
Also check the permissions of /oracle/SID/oraInventory, it should be owned by ora<sid> user and group dba.
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 23, 2009 12:05 PM

Activate CCMS for SAP SRM with SAP DB

Hi!
I would like to monitor SAP SRM 5.0 (OS: Windows, DB: SAP DB, Version 7.6.04.11) from SAP Solution Manager.
I have the following problems:
a) it is not posible to execute the tocde DB50 on SAP SRM.
b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)
c)The database is integrated in tcode DB59.
Unfortunately when I execute the connection test I get:
General Connection Data
Connection Name....: SRM
Database Name......: SRM
Database Server....: olda8002
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: olda8002_SRM_00 (Windows NT)
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful      system_failure
Name and Server     : SRM - olda8002
DBMRFC Function     : DBM_EXECUTE
Command             : db_state
Error               : System Error
Error Message       : timeout during allocate / CPIC-CALL:
'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout during connection setup
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
communication_failure
Name and Server     : SRM - olda8002
   DBMRFC Function     : DBM_CONNECT
   Error               : Communication Error
   Error Message       : Error when opening an RFC connection
   4. Connect. test with "native SQL" ( SRM )
Successful
What I have done:
I have upgraded the server as well the client software to the version 7.6.04.11
Can someone help me with suggestion?
Could it be the issue with independent path on windows or do I miss some programs?
In tcode DB59 in Connection test the following values could not be determined:
DBMRFC Release (empty)
DBMCLI Release (empty)
Thank you
regards
Thom

Hello Thom,
"a) it is not possible to execute the tocde DB50 on SAP SRM."
-> Run /ndb50n with the database connection SRM created in /ndb59.
     Please give more details about errors.
"b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)"
-> First fix the database connection in /ndb59.
    Please let me know the version/SP of the SAP Basis on SAP Solution Manager system.
"c)The database is integrated in tcode DB59."??
You posted that you created the database connection for the database.
On the application server < Application Server: olda8002_SRM_00 > run ::
/nsm49 ->dbmrfc -> execute -> post results
/nsm59 -> SRM connection -> test connection ->
1) What are DBSL Release/DBSL Patch on the appl. Server?
2) Update with output from the /nsm49 -> dbmcli tool ::
       dbmcli -s dbm_getpath IndepProgPath
3) Check that Path env. Variable of the srmadm on olda8002 adjusted with
    <IndepProgPath>/bin & <IndepProgPath>/pgm
4) Test TCP/IP connections in /nsm59::
     SAPDB_DBM                        SAP DB dbmrfc server
    SAPDB_DBM_DAEMON                 SAP DB dbmrfc server daemon
< According your information the test connection in /ndb59 failed for :
    Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
   & Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode) >
   Run /ndb59 -> Connection test -> select the appl. Server -> Connection test
=> /nst11 && check errors in dev_rd at the end.
    /nsm21 -> check the system errors.
    /nst11 -> check the errors in the corresponding dev log of WP.
   Do you have blank space in the IndepProgPath path name?
Thank you and best regards, Natalia Khlopina

SAP SRM 7.0 SP upgrade issue- unable to create SC

Similar Messages

Maybe you are looking for