SAP SRM Scenarios

Is it possible to revert back to classic scenario , after extended classic scenario has been implemented in the system in SAP SRM ? If so, how to perform that activity ? Thanks.

Hi Harini,
If the extended classic checkbox is checked, then you cannot revert this setting back.
But even though you have this extended scenario activated you can always have classic scenario also running with few SPRO settings to control the same using product categories.
This becomes your decoupled scenario.
Hope this helps/.
Regards
-sam

Similar Messages

SAP SRM scenarios and configurations

Hi,
Please anyone can send me the documents related to SRM to understand the different scenarios and the configurations.
Regards,
Sashi

Dear Sashi,
you might take a look at the following documents (service.sap.com)
https://websmp103.sap-ag.de/srm-inst
There you can find the installation and upgrade documents. I´m sure you can also find further info for the different scenarios in this forum by using the search functionality.
Kind Regards
Michael

SAP SRM 7.0 with ECC EHP 4 components to execute scenario

Hi All,
I am new to SAP SRM 7.0.Could you please let me know that what are all the components needs to be in place to execute the technical scenarios and business scenarios.I had an hands on experience on SAP SRM 5.0 with ECC 6.0 backend.
Some where i read that there are lot of configuration changes when we integrate SRM 7 with ECC EHP 4.Do we need to have PI 7 for executing Centralized contract and plan driven procurement scenario?Please guide me to have some exposure towards higher version.Thank you in advance.
Best Regards,
praveen

Hello,
You can refer the INSTALLATION AND UPGRADE INFORMATION , Master guides etc maintained at the below mentioned location which will answer all your query's here.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 .
Best Regards,
Rahul

New article: SAP SRM Technical Scenarios u2013 Decision Matrix

Dear colleagues,
This is to inform you of my new article posted on SDN:
[SAP SRM Technical Scenarios u2013 Decision Matrix|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50df82f9-37f9-2c10-1584-c711fbb47544?quicklink=index&overridelayout=true]
The article discusses how to employ decision matrix methodology to facilitate the task of selecting a (primary) SRM technical / deployment scenario: Classic, Extended Classic, Standalone.
More SRM-related articles can be accessed under:
http://www.sdn.sap.com/irj/scn/articles-srm-all
Enjoy
Cheers,
Serguei

Hi Serguei,
Thanks a lot your article about the Technical Scenario -Decision matrix.
Continue your Good Work. I need a help.
I am SRM consultant for the past 3 +years..
I want to learn about Service procurment on my own Can you send some link or any articles related to service
procurement on my Business ID
Regards
G.Ganesh Kumar

Establishing a connection between SAP SRM and MM

Dear All,
I am working for a multi-national company and now we are thinking to implement SAP SRM but I have some questions about communication between SAP MM and SRM. Firstly I want so share with you our as-is status and then my doubts and question that I have.
In our case we have two different locationed organizations which are using different version of SAP system and SAP MM. In this two sap system mostly codes are and descriptions are different for all materials and now we want gather all data and we want to have one global code system and (local code also will remain). I mean we want to call same materials with one global unique code instead of two different codes. We are thinking to implement something like coding center that will take local master data from local organization then will assign global code, update table then with somehow will update SAP SRM.
For example:
We have local master data on R/3 is maintained manually by local user and net item is created locally each country by local user.Coding center will be aware of new creation by mail, automatically. Coding center will update table (adding a new row for each new item) on translator (tool for assigning global code for materials) assign to each new item a global code and category and in this way SRM will be updated automatically based on translator.
I am thinking to develeop a tool (excel,access etc.) that will take new item creation manually or auto from local organization then will assign a global code and category then will update SAP SRM automatically
Regarding to tool I have some questions:
1)     which are the standard communication channel between R/3 and SRM or How they can speak with each other ?
2)     Is there any standart batch file (BI or BAPI) to be able to perform this.Is it possible to develop tool using excel or access etc. which will manage coding task.
3)     When we are trasferring for the first time Master Data from MM to SRM is there any standard transaction?
4)     how the two MD are aligned (i.e. what if a new item is created or modified on MM)?
5)     standard program (transaction) for aligning available ?
6)     ) how this process can be triggered (scheduled using SAP scheduler, event or user driven)
7)     Where the translator (tool) should be (R/3 local, SRM, BW, other) --> Enrichment table
8)     How we can build the communication transaction?
Thank you very much
Any comments and answers will appreciated and rewarded
Regards,

Hi,
Have you considered using CCM. You generally use an industry standard code (perhaps UNSPSC) in CCM as your vendors would all have different number (similar to your scenario). CCM is a plug-in to SRM, supplied by SAP.
The authoring tool is where you can enrich your catalogue, and have approval dependant on rules that you setup. In your case you would possibly have a catalogue per locationed organisation (or R/3 system). These would then be mapped to a master catalogue, and assigned to users as views. This tool is a BSP on SRM. You could also upload these catalogues from Excel (as a CSV) or through XI as XML. We use the automatic transfer of materials from R3 and then there is a report in SRM to feed that through to the catalogue.
The only thing that needs to be thought through is how you feed the selected catalogue item back to the differing R3 systems, but this shouldn't be a stumbling point.
Cheers
Rob

MDM catalogs to be used for PM-SRM scenario

Hello All,
We are in a situation where we are using the SRM-MDM scenario for regular shopping carts. And also would like to leverage these MDM catalogs for purchases made in ECC Plant Maintenance "work Orders" for non-stock ECC material numbers maintained in ECC.
These material numbers in ECC will have a Manufacturing Part Nmber (MPN) in the material master data.
Since we had some difficulty connecting these SRM-MDM catalogs directly to the ECC work order we would like to bring these requisitions generated by "Work Orders" and push them to SRM. (Standard SAP)
Once these Requisitions come into SRM as SC.. the system automatically approves this SC (Which is standard SAP) but in this process we would like to know if there is a way the system can automatically make a call to MDM based on the Manufacturing Part Number (MPN) and bring in the price and the vendor details back to the SC automatically.
Currently we are using SRM 6.0 and MDM 2.0 in our landscape..
Any suggestions will be appreciated and rewarded..
Regards
SRM6.0 Ramp-Up-Customer

Hi,
Go with: SAP Application Components"> SAP SRM"> SAP SRM ENHANCE PACKAGE" >EHP1 FOR SAP SRM 7.0>Installation -->based on -->based on SAP NW 7.02 --> 51039147_1 SRM-MDM CATALOG 7.01 1 of 5
Download relevent OS copy as its AXi and DB2. What ever It can be: OS Bit 64 or OS Bit 32.
As it's DVD so it contains all version info in lable.sca file. Read it before you start installation.
Regards,
yaniVy
reward if helps

What is the Role of SAP PI in SAP SRM?

Hello Gurus
I'm from SAP-XI background.
In my project I need to create a scenario from SRM ---> PI/XI ---> MDM.
I'm having the below queries regarding this scenario.
1) Do I need to download the "XI CONTENT for SRM SERVER and import it into PI server.
2) If so what is the exact location in the service market place from which I can download
3) What are the steps that need to be done between SRM and PI and also in SLD so that data will be sent from SRM to PI.
Can anyone answer my queries.
Thanks and Regards,
Pruthvi

Hi Pruthvi,
Mentioned below are the list of output medium for SAP SRM.
1. Email.
2. Fax.
3. Print.
4. XML.
Whenever SRM want to send data to another system in XML format and if you are not using SOA then PI is very much required to transfer the XML data to the target system. When you integrate SRM with ECC 6 EHP 4 or higher version then many documents are transmitted in XML format only and XML document is sent out of SRM using ABAP Proxy.
Since the XML data is sent out via ABAP proxy you have to import the integration objects for SAP SRM into SAP NetWeaver PI. you can find the same in the below location.
https://websmp103.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=DISPHIER&HEADER=N&FUNCTIONBAR=Y&EVENT=TREE&TM…
Steps involved :
1. Deploy the integration objects of SAP SRM into SAP NetWeaver PI.
2. Update the SLD with new business system data.
3. Check Active Process Integration in the transaction SPRO in SRM .
4. Go through the below steps :
     1) One RFC of type H to point to PI with all the details.
     2) Define the role of the business system in the server that you want to see(Sxmb_Adm)
     3)Connection between Business System and System Landscape Directory.
     3a)RFC destination LCRSAPRFC of type T for SLD connection.
     3b)RFC destination SAPSLDAPI of type T for SLD connection.
     4)Maintain the SAP J2EE Connection parameters for LCRSAPRFC and SAPSLDAPI in SAP J2EE      Engine
     5)Maintain SLD access details in Transaction SLDAPICUST.
     Please refer the section 1.3.1, 1.3.2, 1.3.3 and 1.3.4 in the document(as linked provided below)
SLDAPICUST should point to the SLD host server. If you have a central SLD installed on the Dev server, then it is ok that it is using the host and port of the Dev server.
PIAPPLUSER is the normal user that is used in trx SLDAPICUST (the user must have the role SAP_XI_APPL_SERV_USER).
'Lastly, will the gateway Server of SAPSLDAPI and LCRSAPRFC will be the same for both DEV and QAs systems in XI?'
5. Make the necessary confirmation in Integration directory for the relevant interfaces.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?quicklink=index&…
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0ac1a33-debf-2c10-45bf-fb19f6e15649?QuickLink=index&…
Checking XI Settings - mySAP SRM: Basic Settings - SAP Library
Regards,
Suresh

SRM 5.5 as an add-on on ECC 6.0 vs SAP SRM 5.5 server

Hi
Are there any limitations if we go with SAP SRM 5.5 Server as an add-on on ECC 6.0 compared to Implementation of SAP SRM 5.5 server on its own.
FYI-We just have one ERP Back-end system.
BTW, what is the difference between SAP SRM server 5.5 vs SAP SRM server 5.5 Plus.
Thanks in advance.
Thanks & Regards,
Anji

Hi
Summary:
You can use classic scenario in Add-on.
You can use self-service procurement and SUS in Add-on.
You cannot have Sourcing and other scenarios.
No migration from Add-on to Separate server available.
Best regards
Ramki

In depth information about SAP SRM

Hi,
i was wondering if there is a source or may somebody personally who can answer me some general questions about sap SRM, which go beyon the 10 page 40000feet-white paper of SAP.
- what is the main difference between MM and SRM
- how difficult is the migration/upgrade to SRM having a MM in place
- what standard purchasing processes are provided by SAP SRM
Thanks for your feedback
Torsten

Hi Torsten,
Indeed, it's quite complicated to answer your questions in some sentences.
Please check the available document sources, maybe you can help yourselves:
If you have an access to the service marketplace, see the note 1026369 for useful links. If not, see the following links (for some of them regisered user is needed):
- The online help is available at http://help.sap.com -> SAP Business Suite -> SAP Supplier Relationship Mgmt. or http://help.sap.com/content/documentation/erp/docu_sbs_erpsrm.htm
- Integrated Business Content: https://websmp201.sap-ag.de/ibc ;
- Installation And Upgrade Documentation: http://service.sap.com/instguides
mySAP Business Suite Applications -> mySAP SRM -> mySAP SRM Server 5.0
Download MasterGuide and scenario-specific instructions.
Follow this link for detailed understanding of srm business process.
- Installation and upgrade information is available at http://service.sap.com/srm-inst
- wiki: https://wiki.sdn.sap.com/wiki/display/SRM This is good starting point.
- Integrated Business Content for SRM is available at http://service.sap.com/ibc-srm
- SAP Best Practices are available at http://service.sap.com/bestpractices
- General product information about SRM is available on the SAP home page: http://www.sap.com/solutions/business-suite/srm/index.epx
Kind regards,
Peter

Namespace problem in SRM scenario.

Hi Experts,
I am using the RFQ scenario on SRM (Proxy) to PI to RFC.
The scenario is standard SRM Scenario.
The problem is with namespace, coming from SRM Proxy is http://sap.com/xi/SRM/Sourcing/Global
using same message Type on PI, but XML namespace here in PI is different for this message, it is http://sap.com/xi/SAPGlobal/Global
As the namespaces are not matching, the message is in RED.
How I can solve this ?
Study SAP

Hi Vijaykumar,
Thanks for your reply.
But it is standard proxy structure, Is it fine to modify this ?
& it is proxy, so we have to regenerate it in SRM also.
is it fine ?
Study SAP

Reports in SAP SRM

The client I am working with is on SAP SRM 7.01 with a standalone scenario. Only when the invoice is posted and 3-way match is done, the follow-on documents are created in SAP. This is severely limiting the client to run reports in SAP SRM for day to day use.
The client wants to run the following reports:
Report 1: A report that shows the following columns and can be run in SRM GUI.
Company Code, PO #, Line #, Ordered Quantity, Unit Price, UOM, Received Quantity, Invoiced Quantity
Report 2: A report that shows the following columns and can be run in SRM GUI.
Company Code, Invoice #, Supplier Name, WBS/Cost Center #, Invoice Amount, Invoice Create Date, Invoice Status
Also, the client wants to extend these reports and create new ones based on the requirements.
Any ideas on how to create these reports are welcome.
Thanks in advance.

Hi Kartikeya dixit,
Thanks for your reply.
My Scenario is like this..
1.Selection Criteria Screen
1.1 RFQ number : xxxxxxxxxx
1.2 From Date : xx/xx/xxxx To Date : xx/xx/xxxx
2.Based on the input criteria given above, get the details from FM bbp_pd_bid_getdetail for the rfq numbers given above for object_type=”BUS2200” and process_type = “RFQU”.
3.Get the RFQ number, Created At i.e. object_id and created date.
4.Item details can be obtained
5.Bidder details can be obtained for partner_fct=”00000018”.From table BUT000 the fields partner, name_org1 can be obtained to print the Supplier code and supplier name.
6.The RFX response details can be obtained using FM BBP_PD_QUOT_GETDETAIL to get the total value for the items in the rfx response.
The object type to be selected is BUS2202 and process type = QUOT
7.Display summation of the values for each supplier has to be displayed for each supplier.
Can you help me what to do ....

Reg SRM Scenarios

I have no idea on what and how or anything abour SRM system and its components.
But now I have to Integrate EBP & SUS (What are they & their purpose?) in SRM for exchange of some data like PO as attachments.I also have to send the same to R/3 also.
Is it possible? If yes, please let me know the steps to be followed or any blogs on this kindaa scenarios.
Thanks
siva

hi check the belowlinks for reference
Supplier Relationship Management - SAP SRM Partner Interface (B2B-OPI) [original link is broken]
https:/.../sdn/articles-topic?rid=/webcontent/uuid/c0507297-65a0-2a10-8d8c-f160c3641350&startIndex=81
SAP Supplier Relationship Management - SAP SRM Open Catalog Interface (B2B-OCI) [original link is broken]
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Implementation costs SuS-SRM scenario (service procurement/web-based)

Hi out there,
I am currently trying to rough-estimate the implemantation costs for a SuS-SRM scenario (service procurement - supplier enablement/web-based) with all the components it requires:
software-wise: SRM with SuS and XI would be needed
Hardware-wise ? (rough estimate)
Consulting fees ? (rough estimate)
Current facts: SAP Enterprise 4.7 in use
Or maybe somebody can refer me to a SAP price list. I have searched high and low with no positive result. A rough estimate would be good enough.
kr
Andre

Dear Emmanuel,
Yes you will not find the Interface mapping after the scenario generation. These SRM scenarios are Proxy communication scenarios and mainly involved with no change in structures.
Regarding the Communication channels, yes you have to create the channels first, before the scenario generation.
The SRM scenarios are mainly used with proxy communication and you have to create channels with adapter type XI.
In your case - the scenario is - Service_Procurement_SupplierEnablement . you have to create two receiver communication channels. this scenario mainly exchanges data between EBP and SUS. the integration happens with the below interfaces-
InvoiceConfirmation_Out, InvoiceRequest_Out, PurchaseOrderRequest_Out, ServiceAcknowledgementConfirmation_Out, SupplierPortalTradingPartner_CreateOrChange_Out , InvoiceRequest_Out etc.
The Video I have uploaded to this link-
http://www.easy-share.com/1913995983/011000358700001939872008E.zip
Please download the same, you need WebX player as it is a .arf file.
Thanks
Sugata B Majumder

XI content for SAP SRM SERVER 6.0

Hi All,
I want to implement SRM-MDM CATALOG Business scenario, but i am not getting the XI content for Software Component Version <b>SAP SRM SERVER 6.0</b>.
Can anybody tell me from where to get the XI content for Software Component Version <b>SAP SRM SERVER 6.0</b>.
Helpful answers will be rewarded.
Thanks,
Shiv

Hi Shiv,
You can get the XI contents for SRM Server 6.0 under this URL:
https://websmp107.sap-ag.de/swdc
Support Packages and Patches -> SAP Application Components -> SAP SRM (WITH SAP EBP) -> SAP SRM 6.0 -> Entry by Component -> XI Content
But for this, you requires a valid marketplace user-id and password.
But according to my understanding, you can use the XI contents for SRM MDM Catalog 1.0 under SAP SRM 5.0 also.
The file name is SRMMDMCAT1000_2-20001719.ZIP.
Thanks

How to create Reports in SAP SRM ?

Hi,
I am new to SRM.
I have tried to create reports in SRM.But the tables are not opening..
Can u explan how to start reports,Selection Screens in SAP SRM ?
Regards
Lokesh

Hi Kartikeya dixit,
Thanks for your reply.
My Scenario is like this..
1.Selection Criteria Screen
1.1 RFQ number : xxxxxxxxxx
1.2 From Date : xx/xx/xxxx To Date : xx/xx/xxxx
2.Based on the input criteria given above, get the details from FM bbp_pd_bid_getdetail for the rfq numbers given above for object_type=”BUS2200” and process_type = “RFQU”.
3.Get the RFQ number, Created At i.e. object_id and created date.
4.Item details can be obtained
5.Bidder details can be obtained for partner_fct=”00000018”.From table BUT000 the fields partner, name_org1 can be obtained to print the Supplier code and supplier name.
6.The RFX response details can be obtained using FM BBP_PD_QUOT_GETDETAIL to get the total value for the items in the rfx response.
The object type to be selected is BUS2202 and process type = QUOT
7.Display summation of the values for each supplier has to be displayed for each supplier.
Can you help me what to do ....

SAP SRM Scenarios

Similar Messages

Maybe you are looking for