SAP Standard ESS country structure not showing on the iViews
Hi All,
Some of the Fields in the SAP Standard Employee Self Service Country structure not showing on the iViews, if we want to bring those fields to iView level, What would be the solution.
Please suggest.
Thanks
PRadeep
Hi Pradeep
If these are mandatory fields or legall required in that country and delivered in V_T588M or V_T588MFPROPS then you need to check with SAP why they are not shown in the ESS scenario
If these are optional or R3 specific fields it could be they are not delivered in V_T588MFPROPS - try inserting
an overide in V_T588MFPROPC
If still you cannot get these fields you may need to add a field to the ESS application using NWDI
and you may also need to change the model so it recognises the new field - this is effectively changing
the SAP delivery
Best regards
Stuart
Similar Messages
-
ESS tab does not show up after deploying ESS
We did every configuration step for ESS and we had no issue before for other projects.
However this time ESS tab does not show up on EP even the roles are assigned.
ALL Jco tested OK.
What could be wrong?
Thanks for your help.Jose:
Thanks!
I think I miss
BP_ERP5ESS
BP_ERP5MSS
Because I am at ecc6 enhp4, the matrix at Wiki did not specify above BP version.
Could you tell me what version of
BP_ERP5ESS
BP_ERP5MSS
should be applied to the EP7.01?
Follow up:
Jose: I do see the BP at the same Wiki:
BP ERP05 ESS 1.41 SP04
BP ERP05 MSS 1.41 SP04
BP ERP05 COMMON PARTS 1.41 SP04
I am going to apply them on the portal. Do you agree? Thanks again.
Thanks! -
Step by Step procedue to modify SAP standard ESS screens
Hi all,
I am new to Enterprise portal..
I have a requirement to modify the SAP Standard ESS screens, basically to add some new fields into it. I have the NWDI configured in the system. Can some explain me the step by step procedure to bring the source code into NWDS?
Regards,
Bharath Mohan BHi
Complete Custom like ESS development
SDN Day session in Las Vegas: Custom development of Web Dynpro ESS applications using Floor Plan Manager
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/essPersonalInformationUIenhancementwithoutmodification&
Re: Steps for ESS MSS installation,Configuration
Go to above links step by step
Or you can search in SDN accrding to ur requiremt.
Regards
_SS -
Prices for the characteristic is not showing in the webshop
hi all,
we are facing a strange issue.
When we are trying to select configuration for the configurable product the prices are not showing in
the webshop against each configaration option but when we press the accept button after selecting the configuration the prices are adding automatically to the total.
our actual requirement is we have to show the prices against each configurable part of the configurable product in the webshop.
Whether we have to implement any special IPC user exit for this ?
there is already one standard implementation com.sap.spc.document.impl.userexit.csticValueSurcharge.StandardImplementation
under the CVS type userexit with the std delivery.
Note:we haven't done any custome development in this page of the webshop.
Please help it is urgently needed
Thanks and Regards
shanto allor
Edited by: shanto aloor on Mar 13, 2009 3:49 PM
Edited by: shanto aloor on Mar 16, 2009 1:47 PMHi Shanto,
The business requirement you have can be managed by the field catalog.
I think you will have to maintain the value of all possible combinations while you are selecting the characterstics.
You will have to add a field to the field catalog at item level and subsequently included this field in a condition table, access sequence and condition type.
When attributes of field catalog are being passed to IPC, you need to populate this new field by writing a code in BADI CRM_COND_COM_BADI.
Then in the WEB UI the field can be accessed using java code , i think this shud help you.
Wish u gud luck for this assignment. -
"Extended" is not showing in the slash screen of PS Cs6
Recently i had downloaded trail version of PS Cs6 extended..!!
but i was amazed to see that the term EXTENDED is not showing is the splash sceen, and even the splash screen is also different t :\ even 3d menu don't appears..??
What might be the reason..??
Here is the System info provided by ps..!!
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1
System architecture: AMD CPU Family:15, Model:6, Stepping:2 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2812 MHz
Built-in memory: 2431 MB
Free memory: 544 MB
Memory available to Photoshop: 1976 MB
Memory used by Photoshop: 60 %
Image tile size: 132K
Image cache levels: 4
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: False.
OpenGL Allow Advanced Mode: False.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 7025 / nForce 630a/PCI/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 900, right: 1600
Video Card Number: 1
Video Card: NVIDIA GeForce 7025 / NVIDIA nForce 630a
OpenCL Unavailable
Driver Version: 8.17.12.5896
Driver Date: 20100709000000.000000-000
Video Card Driver: nvd3dumx.dll,nvd3dum
Video Mode: 1600 x 900 x 4294967296 colors
Video Card Caption: NVIDIA GeForce 7025 / NVIDIA nForce 630a
Video Card Memory: 128 MB
Video Rect Texture Size: 4096
Serial number: 92628701192123445467
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\Tuhin\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
F:\, 138.6G, 21.9G free
E:\, 136.7G, 18.2G free
D:\, 146.5G, 80.5G free
C:\, 43.9G, 15.0G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
A3DLIBS.dll A3DLIB Dynamic Link Library 9.2.0.112
ACE.dll ACE 2012/01/18-15:07:40 66.492997 66.492997
adbeape.dll Adobe APE 2012/01/25-10:04:55 66.1025012 66.1025012
AdobeLinguistic.dll Adobe Linguisitc Library 6.0.0
AdobeOwl.dll Adobe Owl 2012/02/09-16:00:02 4.0.93 66.496052
AdobePDFL.dll PDFL 2011/12/12-16:12:37 66.419471 66.419471
AdobePIP.dll Adobe Product Improvement Program 6.0.0.1654
AdobeXMP.dll Adobe XMP Core 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPFiles.dll Adobe XMP Files 2012/02/06-14:56:27 66.145661 66.145661
AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14:56:27 66.145661 66.145661
adobe_caps.dll Adobe CAPS 6,0,29,0
AGM.dll AGM 2012/01/18-15:07:40 66.492997 66.492997
ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56
aif_core.dll AIF 3.0 62.490293
aif_ocl.dll AIF 3.0 62.490293
aif_ogl.dll AIF 3.0 62.490293
amtlib.dll AMTLib (64 Bit) 6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00) 1.000000
ARE.dll ARE 2012/01/18-15:07:40 66.492997 66.492997
AXE8SharedExpat.dll AXE8SharedExpat 2011/12/16-15:10:49 66.26830 66.26830
AXEDOMCore.dll AXEDOMCore 2011/12/16-15:10:49 66.26830 66.26830
Bib.dll BIB 2012/01/18-15:07:40 66.492997 66.492997
BIBUtils.dll BIBUtils 2012/01/18-15:07:40 66.492997 66.492997
boost_date_time.dll DVA Product 6.0.0
boost_signals.dll DVA Product 6.0.0
boost_system.dll DVA Product 6.0.0
boost_threads.dll DVA Product 6.0.0
cg.dll NVIDIA Cg Runtime 3.0.00007
cgGL.dll NVIDIA Cg Runtime 3.0.00007
CIT.dll Adobe CIT 2.0.5.19287 2.0.5.19287
CoolType.dll CoolType 2012/01/18-15:07:40 66.492997 66.492997
data_flow.dll AIF 3.0 62.490293
dvaaudiodevice.dll DVA Product 6.0.0
dvacore.dll DVA Product 6.0.0
dvamarshal.dll DVA Product 6.0.0
dvamediatypes.dll DVA Product 6.0.0
dvaplayer.dll DVA Product 6.0.0
dvatransport.dll DVA Product 6.0.0
dvaunittesting.dll DVA Product 6.0.0
dynamiclink.dll DVA Product 6.0.0
ExtendScript.dll ExtendScript 2011/12/14-15:08:46 66.490082 66.490082
FileInfo.dll Adobe XMP FileInfo 2012/01/17-15:11:19 66.145433 66.145433
filter_graph.dll AIF 3.0 62.490293
hydra_filters.dll AIF 3.0 62.490293
icucnv40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
icudt40.dll International Components for Unicode 2011/11/15-16:30:22 Build gtlib_3.0.16615
image_compiler.dll AIF 3.0 62.490293
image_flow.dll AIF 3.0 62.490293
image_runtime.dll AIF 3.0 62.490293
JP2KLib.dll JP2KLib 2011/12/12-16:12:37 66.236923 66.236923
libifcoremd.dll Intel(r) Visual Fortran Compiler 10.0 (Update A)
libmmd.dll Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler 10.0
LogSession.dll LogSession 2.1.2.1640
mediacoreif.dll DVA Product 6.0.0
MPS.dll MPS 2012/02/03-10:33:13 66.495174 66.495174
msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcp100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcp90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1
msvcr80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195
msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1
pdfsettings.dll Adobe PDFSettings 1.04
Photoshop.dll Adobe Photoshop CS6 CS6
Plugin.dll Adobe Photoshop CS6 CS6
PlugPlug.dll Adobe(R) CSXS PlugPlug Standard Dll (64 bit) 3.0.0.383
PSArt.dll Adobe Photoshop CS6 CS6
PSViews.dll Adobe Photoshop CS6 CS6
SCCore.dll ScCore 2011/12/14-15:08:46 66.490082 66.490082
ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15:08:46 66.490082 66.490082
tbb.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
tbbmalloc.dll Intel(R) Threading Building Blocks for Windows 3, 0, 2010, 0406
TfFontMgr.dll FontMgr 9.3.0.113
TfKernel.dll Kernel 9.3.0.113
TFKGEOM.dll Kernel Geom 9.3.0.113
TFUGEOM.dll Adobe, UGeom© 9.3.0.113
updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME) 6.0.0.24
WRServices.dll WRServices Friday January 27 2012 13:22:12 Build 0.17112 0.17112
wu3d.dll U3D Writer 9.3.0.113
Required plug-ins:
Accented Edges 13.0
Adaptive Wide Angle 13.0
ADM 3.11x01
Angled Strokes 13.0
Average 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Bas Relief 13.0
BMP 13.0
Camera Raw 7.0
Chalk & Charcoal 13.0
Charcoal 13.0
Chrome 13.0
Cineon 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Collada 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Color Halftone 13.0
Colored Pencil 13.0
CompuServe GIF 13.0
Conté Crayon 13.0
Craquelure 13.0
Crop and Straighten Photos 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Crop and Straighten Photos Filter 13.0
Crosshatch 13.0
Crystallize 13.0
Cutout 13.0
Dark Strokes 13.0
De-Interlace 13.0
Difference Clouds 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Diffuse Glow 13.0
Displace 13.0
Dry Brush 13.0
Eazel Acquire 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Embed Watermark 4.0
Extrude 13.0
FastCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Fibers 13.0
Film Grain 13.0
Filter Gallery 13.0
Fresco 13.0
Glass 13.0
Glowing Edges 13.0
Grain 13.0
Graphic Pen 13.0
Halftone Pattern 13.0
HDRMergeUI 13.0
IFF Format 13.0
Ink Outlines 13.0
JPEG 2000 13.0
Lens Blur 13.0
Lens Correction 13.0
Lens Flare 13.0
Liquify 13.0
Matlab Operation 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Measurement Core 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mezzotint 13.0
MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Mosaic Tiles 13.0
Multiprocessor Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Neon Glow 13.0
Note Paper 13.0
NTSC Colors 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Ocean Ripple 13.0
Oil Paint 13.0
OpenEXR 13.0
Paint Daubs 13.0
Palette Knife 13.0
Patchwork 13.0
Paths to Illustrator 13.0
PCX 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Photocopy 13.0
Photoshop 3D Engine 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Picture Package Filter 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Pinch 13.0
Pixar 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Plaster 13.0
Plastic Wrap 13.0
PNG 13.0
Pointillize 13.0
Polar Coordinates 13.0
Portable Bit Map 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Poster Edges 13.0
Radial Blur 13.0
Radiance 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Read Watermark 4.0
Reticulation 13.0
Ripple 13.0
Rough Pastels 13.0
Save for Web 13.0
ScriptingSupport 13.0
Shear 13.0
Smart Blur 13.0
Smudge Stick 13.0
Solarize 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Spatter 13.0
Spherize 13.0
Sponge 13.0
Sprayed Strokes 13.0
Stained Glass 13.0
Stamp 13.0
Sumi-e 13.0
Targa 13.0
Texturizer 13.0
Tiles 13.0
Torn Edges 13.0
Twirl 13.0
Underpainting 13.0
Vanishing Point 13.0
Variations 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Water Paper 13.0
Watercolor 13.0
Wave 13.0
WIA Support 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
Wind 13.0
Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00)
ZigZag 13.0
Optional and third party plug-ins: NONE
Plug-ins that failed to load: NONE
Flash:
Mini Bridge
Kuler
Installed TWAIN devices: NONEI also don't know why is this so confusing. I can't tell what I have.
The About screen is the same. No 3D menu, but if you go to "menus" properties, #D is under Panel Menus like it should be available.
During download is was also confusing, because in one place it just said CS6 the other it said extended.
System info should tell us what is going on.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 2
System architecture: Intel CPU Family:6, Model:15, Stepping:11 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 4
Processor speed: 2394 MHz
Built-in memory: 3325 MB
Free memory: 837 MB
Memory available to Photoshop: 1675 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce 8800 GT/PCIe/SSE2 -
Finish material is not showing at the time of confirmation
Dear all ,
Finish material is not showing in the goods movement tab .So that movement type 101 is not possible at the prod ord confirmation .
Goods movement is accepting in mb31.
So plz suggest meAbhay,
I think you are asking for Auto GR,whereby upon confirmation GR will happen automatically in the background
Required Setting
In the routing ,to the last operation assign PP03(Auto GR-Std SAP) as the control key instead of PP01
After that while doing confirmation for last operation in CO11N,there if you click the goods movement tab you will be able to see the finish material with movmnt type 101
Hope the above is clear
Reward points if useful n close the thread
Regards,
SVP -
The approver does not show in the approval preview after saving sh. cart
Hi ,
I would appreciate if anyone can reply me for fixing the problem.
Problem: The approver does not show in the approval preview after the shopping cart is saved, however before saving the shopping cart it shows the approver in the approval preview. We are using two workflows: WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
Details of the problem:
The following steps specify the problem in detail , it is applicable for both the workflows WS10000060 Auto approval and WS10000276- 1 level spending limit approval.
1. Shopping created
2. The approval preview shows the approver ( please see #1 in the attached document) before saving the shopping cart.
3. Shopping cart is saved.
4. After saving , Check status transaction shows the shopping cart in status awaiting approval
5. The section approval shows No workflow started , application error occurred
6. T.Code SWI1 shows the workitem created for the shopping cart but in error.
7. The work item container does not show any agents
I would appreciate it anyone can reply as to how to fix it ASAP.
Best Regards
PawanHi Disha,
I have synchronised through SWU_OBUF several times since yesterday , but still at the same place.
In the workflow customising - The only red entry which I have is for check entries from HR control tables under Mainiatin definition env. and Mainiatin guded procedure for gateway under guided procedure (new in SRM 5.0) .The verification workflow works fine . Also I think these entries will not impact the workflow functionalhese were red even in my earlier system .
SLG1 shows all green entries and there are no entries in RZ20.
I have specified task TS10008126 as general task as I want anyone who is identified by SLAapprover should be able to process the workitem and as per documentation I can specify this task as standard task.
What should I do.. , anything am I missing .
Thanks and Best Regards
Pawan -
New field will not show in the Datasource
Hello Experts,
I enhanced a datasource by adding a new field in the append structure and when I saved and activated and when into RSA5 or RSA6 then double clicked on the datasource my ZZ field does not show at the end. Anyone know why this is?
Datasource: 2LIS_11_VAITM
Extract Structure: MC11VA0ITM
Thanks!HI,
Once you have appended the structure .
In RSA6 you need to go to the purticular datasource (In change Mode) and need to uncheck the option *HIDE field for the field you have appended .
After you Uncheck that field save and exit.
Hope it is helpful . -
The library module in 4.3 version does not show all the images
The library module in the version 4.3 of Lightroom does not show all the images. They are marked with gray boxes instead of images. This is especially true of the images which I tried to import to Lightroom since I downloaded 4.3 a few weeks ago. If I want to seen an image, I have to go to the develop module to see it. What should I do? Get this fixed now!!!!!!!!
My bet would be on a corrupt preview folder.
Your preview folder is located in the same folder as your catalog. It has the same name as your catalog with the word Previews.LRDATA at the end of the name. Rename this folder and let Lightroom rebuild the previews. Go to Library>Previews>Render Standard-sized Previews. See if that fixes it.
If it doesn't, you may want to have a look here: http://helpx.adobe.com/lightroom/kb/photos-appear-black-gray-rectangles.html -
Payment from the customer is not showing in the lockbox transaction.
Hi all,
When i execute transaction code FLB1, I could not able to find lockbox and customer did the payment but it was not reflected in sap.
Payment from the customer is not showing in the lockbox transaction.
Please suggest and gide me with solution what could be the reason i am not awear of lockbox process.
Regards,
JC
Edited by: jcnaidu on Sep 17, 2010 6:41 AMThe messages are getting to the recipient...
I am on a Comcast IMAP server if this has anything to do with it and the server settings are following the correct server port numbers, SSL settings, etc... I save Sent messages on the IMAP server for 90 days.... None of these "disappearing" messages were on the server for more than a couple of days.. Typically, these messages will get 'hung' in the Outgoing Mailbox for @30 seconds before sending... like they are being scanned for viruses or Mail can't connect to the server all of a sudden...
I anybody else here is on a Comcast IMAP server, and having this problem of disappearing Sent messages... This would tell us that it might be a Mail Provider issue with their outgoing server...
--prd54usa -
Itunes it's not showing me the last date/time the iPhone/iPad was backed up.
I just backed up my iPhone and iPad but iTunes it's not showing me the last date/time my device was backed up. I had just done a backup about 3 hours ago. And when I go to check the backup location I see a folder there with the time it was last backed up. But it's not showing me the backup date in iTunes. I don't know what to do.
I already tried to remove the folder in App. Support-Mobile Sync and start a brand new backup. But no date.
Tried to delete and start a new iTunes folder in Music but nothing has changed
Any solution is welcome!iCloud requires OS X Lion (10.7.2) or higher. You will need to upgrade to either Lion higher in order to set up iCloud on your Mac. First check to see if your system meets the system requirements to upgrade.
Lion system requirements are:
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Mountain Lion requirements are shown here: http://support.apple.com/kb/HT5444.
Mavericks requirements are shown here: http://support.apple.com/kb/HT5842.
If you can run Mavericks, you can purchase an upgrade from the Mac App Store. If you can only run Lion or Mountain Lion, contact the online store in your country and purchase a redemption code to download it from the Mac App Store.
After upgrading, you will find iCloud in System Preferences>iCloud on your Mac, and can set it up as explained here: http://www.apple.com/icloud/setup/mac.html.
Before upgrading, you may want to check the compatibility of your existing programs by checking here: http://roaringapps.com/apps:table. -
I currently have a mini server (OSX10.8.5, server 2.2.2) that I am using Time Machine to back up 4 external drives that are connected to the server via firewire 800. I would like to use Time Machine to back up to a windows network SMB drive. I can see the drive on my desktop but it will not show in the time machine window to be able to select it for use.
Can this be done
Thanks for any and all helpThe supported targets for Time Machine backups are local (direct-connected) disks, and network targets include Time Capsule, a disk hanging off the current-generation AirPort (though not earlier AirPort devices), and OS X Server systems.
The Time Machine storage is based on the HFS+ file system, so I would not expect TM to work with SMB file services.
While there are hacks to allow Time Machine to access network drives, I would not consider those to be reliable. Skim the forum and the 'net for related details, and for previous discussions of setting this up and the related issues that can arise.
Remember to test the recovery with whatever you decide to use; whole point of backups is the ability to restore the data, after all.
If you want to learn more about Time Machine, Pondini is an excellent resource. -
How do I delete voice memos from my phone? It does not show in the app or in iTunes. Thanks
Welcome to the Apple Community.
Settings > Music > Show all music > Off -
The report I published on the SQL server report server is not showing in the application we use to retrieve reports. My cell phone number is {removed}
Thanks.Hello Roger Tenn,
Thank you for posting in the TechNet Forum.
As this issue is related to SQL server report server, to receive better report, it is recommended to ask in the SQL server forum.
https://social.technet.microsoft.com/Forums/en-US/home?category=sqlserver
The professionals here will be glad to help you.
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
I need help from some Apple people. I have an iPod Touch and I wanted to load it up with some fresh music but I currently don't have a PC. I found an app that would allow me to connect to my 2TB network drive directly and I was able to transfer a bunch of music files to the iPod. Unfortunately, these new files do not show under the Music app and I can't seem to find any way to convince the iPod that they are music. I can play them through the file manager only. Android doesn't have this problem, any music I put on my phone is recognized as music and can be played through any of the music apps. Am I missing something or is Apple to inflexible to handle this?
You can't. The only way to get songs in the Music app is to sync from a computer or to download from iTunes.
Maybe you are looking for
-
This also happened in Windows XP which I was using until recently. The Yahoo mail menu is there but the Firefox menu is on top of it. I tried Firefox safe mode with everything disabled and the problem still happened. I tried Yahoo mail in IE 9 and th
-
Bridge CS3 crashes with RAW folder, CS2 doesn't
I have this folder with all my recent RAW files, 319 shots. If I go to that folder with Bridge CS3, it crashes. I can however go to that folder with Bridge CS2 without it crashing, but I have to drag and drop the file to Photoshop CS3 to work on it.
-
EMET 5 and Comodo AV Compatibility
Hi, I am running Windows 7 x64 SP1 Home Premium with IE11 and Office 2010. I also use Comodo antivurus 2014 (no HIPS). After installing EMET 5, IE and Office apps refuse to start and crash with various errors. Sorry, at this moment I don't have the s
-
Send purchase order e-mail with release strategy
Hi!! I have a problem with sending e-mails in purchase order that are blocked with release strategy. I create a purchase order that is block for the release strategy, then I release it. This is working OK, but I can't send an e-mail with this release
-
I run a Windows 7 with IE10 machine and have a serious problem using "Reader." From a browser, I attempt to open a pdf file and all windows freeze and I have to go into Task Manager to close them. From the desktop, the Adobe window freezes and I get