SAP standard program to delimits infotypes
Hi folks,
Is there any SAP standard program to <u><b>delimits</b></u> the records in HR? I mean for PA/PD infotype. Or I need to write one? I have to delimits some of the IT`s Like 194 and 185...
I found the following program to <b>delimit</b>
RPU204M0 IT 204: delimit report for FA customers
RPU510J1 Utility program to delimit P0008 after pay sclae re-creation
Thanks
Hi Saquib
There is one standard report called RHGRENZ2 which will delimt PD infotypes...
The report only delimits infotypes with time constraint 2 and 3. Infotypes with time constraint 0 and 1 must be delimited using the report Delimit Objects (RHGRENZ0).
Hi I don't see any Standard SAP program to delimit the infotypes that were specified in your message. I believe you may need to write small BDC program to delimit....
Thanks
Thanks
Suresh B Mannem
Message was edited by: Suresh Babu Mannem
Similar Messages
-
Do we any SAP Standard program to Send IDOC of Type CODCMT01
Do we any SAP Standard program for outbound processing for IDOC Type CODCMT01
Message was edited by: Vipin Nagpal- If it is for test purpose only, you could use transaction WE19 (Test Tool).
- As well you could write your own program and user MASTER_IDOC_DISTRIBUTE function module... but in this case you need to fill yourself the fields of the IDOC
- as well you can have a look at function group KALE...
E.g. function module K_DOCUMENT_SEND -
How to add custom fields to the sap standard program ukm_bp_display
How to add new custom fields to the sap standard program ukm_bp_display .
could u please any one help me on this?Hello Kumar,
You have to modify below structure, as this structure is providing the field catalog for output display (ALV).
Here you can see there are a lot of include structures, so if you want to add fields in the output display you can add those fileds as an append structure to any of the below mentioned structures (Like ukm_s_account, ukm_s_bp_cms_sgm etc as per your requiremnt and positon at which you need to dispaly your fields.)
DATA: BEGIN OF gt_grid_alv OCCURS 0.
partner LIKE but000-partner,
credit_sgmnt LIKE ukmbp_cms_sgm-credit_sgmnt.
INCLUDE STRUCTURE ukm_s_account.
INCLUDE STRUCTURE ukm_s_bp_cms_sgm.
DATA: credit_sgmnt_txt LIKE ukmcred_sgm0t-credit_sgmnt_txt.
Gruppe Vector
INCLUDE STRUCTURE ukm_s_bp_vector.
Gruppe OBL = Obligo
include structure UKM_S_BP_CMS_MALUSDSP_OUT.
INCLUDE STRUCTURE ukm_s_display_segment.
INCLUDE STRUCTURE ukm_s_bp_cms.
INCLUDE STRUCTURE bus000_dat.
*DATA: icon(4).
Gruppe RAST (Raster)
DATA:
rast01 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast02 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast03 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast04 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast05 LIKE ukm_s_display_segment-AMOUNT_GRID,
rast06 LIKE ukm_s_display_segment-AMOUNT_GRID.
DATA: rast2_6 LIKE ukm_s_display_segment-AMOUNT_GRID.
"Summe raster 2 bis 6
DATA: END OF gt_grid_alv.
Another way is you can go to SE38, and you can create implicit enhancements.One enhancement point is available here in this required area. so create an implementation and add your fileds with data types.This way is also simple.
Hope this will solve yiour problems.
Regards,
Antony Thomas -
What are the SAP standard programs?
Hi PM Guys,
I have a question that is as below:-
We have the following Master Data:
1) Functional Location
2) Equipment
3) Equipment BOM
4) Counter
5) Catalog Profiles
6) Task List
a) General Task List
b) Equipment Task List
7) Maintenance Plans
a) Time Based
b) Performance Based
Can you tell me the SAP standard programs available for the above master data which can be used for data migration of the above master data from the flat files into SAP system.
Thanks in Advance,
Vijaya KrishnaHI
you can find the standard program while executing the T code LSMW itself.
type LSMW ,specify the description in the next screen select the <b>Standard batch or direct input</b> under the heading you can find the in the field <b>object</b> use F4 to find all the standard programs in SAP
0400 Equipment
0410 Message (IH)
0420 Confirmation (IH)
0425 Measuring point
0430 Measurement Documen
0440 Functional location
0450 Object link
0460 Maintenance plan
0470 Equipment task list
0480 FnctnlLoc.TaskList
0490 Gen.task list
regards
thyagarjan -
Runtime Error In copy Of SAP Standard Program
How do people,
I have copied a SAP standard program H99CWTR0 because I need to add an extra
column output in the report. I have made a few chnages regarding the INCLUDES
When I run the program I am getting the following runtime error:
" The structure of the COMMON PART "DRIVER_DATA_EXCHANGE"
in program "%_T01050" is different from the calling program .....
My question is that it says the error in program "%_T01050" !!
But when I enter this in SE38 it says it doesn't exist !
Any ideas???
AndyThanks mate for replying.
I'll have a look at what you suggest
Andy -
Syntax error in SAP-standard program
Hi experts,
i am facing syntax error in sap standard program.how i can solve that error .
Error in include LFKPZTOP and errro is at line 70.
please help me ASAP.
Thanx & Rgds
ZebaHello Zeba,
go to include LFKPZTOP and check in line 70.
if you are not able to solve that.
post the same line, so that we can understand what is error.
as of my checking the error is "iban is already defined in the include structure bus0bk ,
but i think it dosn't effect your programing.
Regards!
Edited by: Prasanth M on Feb 10, 2009 5:04 PM -
How to fnd SAP STANDARD program of Database table
Hi to all,
Please can anybody tell me , how to find out SAP standard program of database Tables S070 (Breakdown Statistics).
As this table contain two filelds Time To Repair and Time Between Repair , i want to knew how the standard program for the table have calculate them.
i shall be thankfull to you for this.
Regards
Pavneet RanaHi,
Program for table is generated dynamically for each user ID, when ever you change the selection screen in SE16 or when you are executing the table entries for first time. Usually it starts with /1BCDWB/DB followed by table name. In your case it would be /1BCDWB/DBS070.
Go to Se16, enter your table name and click enter. Once you are in selection screen, goto Menu=>system=>Status. Here you can see the program name.
Thanks,
Vinod. -
Addition of my code in sap standard program
hi gurus,
can i add my code in the sap enhancement below in sap standard program
i want add the logic below.
ENHANCEMENT-POINT MATERIALFINDUNG_10 SPOTS ES_SAPFV45P.
$$-Start: MATERIALFINDUNG_10----
$$
ENHANCEMENT 153 OI0_COMMON_SAPFV45P. "active version
IF NOT G_OIK_SUBMAT IS INITIAL. "SOTK000026 DN
TVAK-KALSU = G_OIK_KALSU. "SOTK000026 DN
CLEAR PRODUCT_SELECTION_REKURSIV. "SOTK000026 DN
ENDIF. "SOTK000026 DN
ENDENHANCEMENT.
when i click on enhance button(shift+F4) it does not give me any place to write.
but if i click on the enhancement name i am able create one implementation. is that ok.should i add my code there.Hi Kiran,
That is not the solution I am looking at. Also the link provided within the link you provided does not work which is:
http://www.synactive.net/site/index.htm
Do let me know if you have a solution to change the standard GUI status(Not by copying nor by using the access key) either by any menu exit or something of that sort.
Regards,
Deepak. -
Modify SAP standard fields in an Infotype
Hi friends!
We have enhanced an Infotype successfully added few extra fields and they work perfectly.
In Infotype 28, there are already 3 SAP standard fields and we have added 4 more.
Now, we need to enable/disable according to the our added fields. For Eg by a Custom check box, I need to enable/disable SAP standard field for an infotype.
We tried by LOOP at SCREEN and all but due to SAP standard fields we are unable to do it.
Any ideas?
Please help.
Thanks.Hi Park,
Standard Infotype Fields configured (enable/disabled/hidden) in the view V_T588M (Tcode-SM30). You can disable any standard infotype field here if it is independent of other fields (i.e. before screen opens itself field is disabled).
If you want the field to be disable at runtime you may need to edit the feature 'PNNNN' (where NNNN is your standard infotype number (transaction -pe03)).
Also have you tried to code (loop at screen. endloop) in badi HRPAD00INFTY (method BEFORE_OUTPUT). I am not sure whether this will work or not.
Regards,
Shrinivas -
How and where does SAP standard programs update the master tables...
Hello there,
How and where does SAP standard programs update the master tables...
to be precise.. if a (any) transaction occurs the programs behind it holds the data in temporary structures.
where and when does it get updated in the master table.
can anyone tell me how it happens?
I Know that from the where used list one can find the corresponding table but most of the time it wont suffice
I am expecting a proper answer.
Santosh BHello Santosh,
you need to do some self-reading on the following topic
Updates in the SAP System (BC-CST-UP)
http://help.sap.com/saphelp_47x200/helpdata/en/e5/de86e135cd11d3acb00000e83539c3/frameset.htm
Regards,
Siddhesh -
How to Debug SAP standard Program SAPMM07I
Hi All
Please tell how to debug an SAP Standard Program for MI07 T-code.
In this Transaction I would like to change the Unit of Measure filed to Alternate Unit.
Please, Help me out .. how to debug this program and how to change this field.
Thank you
Prasead KHi Myline
Thanks for your reply. My Issue is that I would like to Diplay "Difference Qty" VM07I-DIFMG and Base Unit
of Measure (ISEG-MEINS) in MI07 Tcode as Unit of Issue (MARM-AUSME) which is defined on Material Master Plant Data View.
Till Now, I did is I copied MI07 Standard Program SAPMM07I to ZSAPMM07I. And Assigned this Z program to MI07 in SE93. Now, I need to make modifcation in this Zprogram such that I display: Unit of Issue and Difference Qty fields on MI07 instead of Base unit of Measure.
Here, Base unit of measure is EA and Unit of Issue in ICS (Imperial Cases). IN MI04 we enter in ICS(unit of Issue.. which is converted to EA. and MI01 its in EA. (Base unit of Measure).
Please if this not clear.. please let me know.
Waiting for your reply.
Thanks once again.. !
Prasead K
Edited by: Prasead K on Feb 19, 2008 9:15 AM -
Modification in SAP standard programs.
Hi All
I am trying to make modification in SAP standard program by using a copy of code from the original program to my program..but facing many errors like the statement BEgin of block syntax is wrong..
i am trying to mdify the foloowing program--RFSSLD00...
Please help me and guide to make changes to this prog..
Also tell me that do we need to again create all the functiongroup and global data declarartion part.
thank u.hi,
Please note that when you copy a standard Sap Program ,make sure all the objects are copied following your compays naming conventions.
Now RFSSLD00 can be copied without any difficuly.after that compare the new copied program with the standard program. going to version mngmt->remote comparison . doing this you can get the differences
check all the includes.. and type pool declartaion and gui status etc....by going to se80
regards,
Safel -
Standard programs to update infotypes
Please provide updates for this question:
What are the standard SAP programs to update infotypes ( Ex: 001 / 002 / 003 ) .
I will be uploading data from legacy system ( Excel / Text file ) and would like to use standard programs
before going ahead with BDC .
Thanks
RohanHi,
I checked out the program you stating.......
In that program itself if you check the documentation its given how to add in fields.......
You can use report RPUSTD00 to transfer master data from your old HR system.
The dataset to be transferred must be stored in a sequential file. The file is stored under the name specified in the "logical file name" field (for more information on logical file names, read the IMG section entitled Additional client-dependent file name maintenance).
The report reads this dataset and creates a batch input session for transaction PA30.
The data description of your old record is defined according to the structure HRDATASET. If this structure does not meet your requirements, create the structure CI_HRDATAS in the ABAP Dictionary. In this structure, you can store the infotype fields to which data should be transferred. Make the necessary changes in RPUSTD00.
Example
If the include CI_HRADATAS contains the field F1 which is to be assigned to the infotype nnnn, add the following ABAP statements to FORM Dnnnn:
CLEAR BDCDATA.
BDCDATA-FNAM = 'Pnnnn-F1'.
BDCDATA-FVAL = SATZ-F1.
APPEND BDCDATA.
If the FORM Dnnnn does not exist for your infotype nnnn, copy FORM D0008 to FORM Dnnnn. Replace the 0008 by your infotype number:
FORM Dnnnn.
CLEAR BDCDATA.
BDCDATA-PROGRAM = 'MPnnnn00'.
BDCDATA-DYNPRO = '2000'.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'Pnnnn-F1'
BDCDATA-FVAL = SATZ-F1
APPEND BDCDATA.
CLEAR BDCDATA.
BDCDATA-FNAM = 'BDC_OKCODE'.
BDCDATA-FVAL = '=UPD'.
APPEND BDCDATA.
ENDFORM.
The FORM Dnnnn is called directly after FORM D0008; see the ABAP statement indicated as "<------ INSERT in the following (starting at line 1730 in the standard system):
LOOP AT INFTAB.
CASE INFTAB.
Include all infotypes in your action *
WHEN '0002'. PERFORM D0002.
WHEN '0001'. PERFORM D0001.
WHEN '0006'. PERFORM D0006.
WHEN '0007'. PERFORM D0007.
WHEN '0008'. PERFORM D0008.
WHEN 'nnnn'. PERFORM Dnnnn. "<------ INSERT
WHEN OTHERS. WRITE: / 'Infotype not included:' (008), INFTAB.
STOP.
ENDCASE.
ENDLOOP.
Parameter DSLOGNAM
Logical file name
Parameter MAPNAME
Session name
Definition
Enter any name for the session to be created. -
What are the bad Effect of changing sap Standard Programs?
Hi all,
I want to know what are the Bad effects of changing SAP standard screen and reports.
I need a bit theoretical Explanation.
Please suggest me some good and effective matter link.
RegardsHi sonal,
If I write the theory here ,might be its going to mess up here.mm..try this link.There are good information in changing a standard functionality.
http://software.feedfury.com/content/28535477-changing_the_sap_standard.html
2. I can tell one of like ...
To change a standard program or functionality or standard field in sap,we have to go for related user,customer scvren exit etc.
We have to find the right exit to that particular transaction and do our customized coding there.We have to be very careful,since we are going to change the standard exit.this user exit will be used in 'N' number of other screens and transaction.So when you change , that change will /may affect the other transactions also.If you corrupt that particular exit,there are chances for that transaction to go for a toss.I have experianced this personally.when I was working on particular userxit and editing,that particular transaction was not working properly for others,since i was doing from my login,everyone came to my place and started bugging me to stop working on it:)
Regards,
SanthoshSivanathan -
hi friends,
is there any possible sap standard function module starting with Zname
i have few Z function modules it is an include program of standard pgm starting with Lname
when i am trying to make changes for this program its asking for access key
when open L& Z named program.in both conditions it opens
z function module only
plz give me any valid reason why we use this
thanks in advance
regards
sooryaHello Soorya
SAP sets restrictions for the valid names of function modules beginning with Z: the customer namespace is Z_*.
If you try to define a function module where the second sign is not "_" then SAP will give you a warning. However, you can ignore this warning (but should not. Instead, name your function module Z_*...).
The reason is that SAP has developed (I guess in their early days) many function modules named Z*.
Simply search (in SE37) for function modules with "Z" and exclude "Z_".
Regards
Uwe
Maybe you are looking for
-
MacBook Pro Late 2013 retina randomly freezing
Hi there, I recently purchased a pretty tricked out MacBook Pro 15" Retina from the refurbished store. Totally stoked to have it, and I was really enjoying the machine. However, I've been having these random lockups about once a day which is the only
-
Mic/Remote on headset doesn't work correctly with my iPhones iPod
Currently I'm using a third party headset because my original apple headset broke.. Sometimes when I first plug in the headset it'll automatically start playing music, fast forward songs, skip tracks, and randomly stop and start again. I usually solv
-
Final Cut Pro 5.1 upgrade with FCS2 disks
I have Final Cut 5.1 installed, but I uninstalled the rest of the Final Cut studio applications, I purchased the FCS2 upgrade and am wanting to know if the disks will upgrade Final Cut without me having the rest of the applications installed, or will
-
What is the Best HD Program for FLASH on the web
I am looking for the BEST HD Video crunching software for hanging HD video on the web. Sorenson Squeeze 5.0?? Visual Hub?? Not using FULL HD, smaller than that because I can not capture FULL HD in FCP without too many obstacles and third party softwa
-
I bought an iTunes gift card but it says that it hasn't been properly activated?
I just bought 3 $10 music gift cards and whenever I try to activate any of them they all say this: Please help! I'm in dire need of new music!!