SAP standart window modification

Hello!
I have to modificate standart SAP window(add Search Help). How can I do it?

hi check this..this is for modifing the po but the process is same to change the standard sap window..
modified sap standard layout set for purchase order
regards,
venkat

Similar Messages

Problem in SAP standard code modification for FB03

Hi Experts,
I am adding 4custom fields in FB03 tcode by doing a SAP standard code modification in SE51.
The program name is SAPMF05L and screen no. is 302(In some SAP verion, it is 304). This is the screen for document line item of an invoice.
My problem is:
When I add the fields in the screen, in which module will I put logic in the PBO and PAI as I am unable to figure out the German comments and the program structuring.
Also, if anybody can tell me what to write as I am little bit confused about the logic of populating my fields with the values.
FB03 is a display transaction so I have to keep my custom screen fields disabled.
Regards,
Sangeeta.

Hi Sangeeta,
For enhancing the screen of this Tcode, first of all search is there any Screen enhancement is provided by SAP or not and in case if it is provided then use that only.
Regards
Jagesh Lakdawala

SAP Script - Window and box

Hello All
I have done changes to include few(3) lines in a SAP Script window. Because of those 3 lines, contents that were printed earlier are not getting printed.
The window is getting printed inside a box and it is defined as
BOX FRAME 10 TW.
Window height is 22.50 Ln,width 9.50 CM.
To rectify this should I increase the height of this window or should I define the attributes of the box
Please reply at the possible earliest.
Thanks in advance.

Check this
Setting default parameters for a box:
You can use the POSITION and SIZE commands to set default parmeters for a box.
Instead of:
/: BOX XPOS '11.21' MM YPOS '5.31' MM HEIGHT '10' MM WIDTH '20' MM INTENSITY 10 FRAME 0 TW
You can write:
/: POSITION XORIGIN '11.21' YORIGIN '5.31' MM
/: SIZE HEIGHT '2' MM WIDTH '76' MM
/: BOX FRAME 10 TW INTENSITY 10
This can be usefull if you gave several boxes that share the same parameters.
If you want to set the position realtively to the window use POSITION WINDOW
to set the position to the top/left start of the window. Then use POSITION
to set the current position relatively to the start of the Window.
Note that you uses "+" or "-" in the ORIGIN position to the set the position relatively.
/: POSITION WINDOW
/: POSITION XORIGIN '+5' MM YORIGIN '+10' MM
the position is now 5 MM from the left and 10 MM from the top of the window
NOTE: After using the position command you can move the current position
realtively to the last used position
/: POSITION XORIGIN '+10' MM YORIGIN '+20' MM
Now the position will be X = 15 and Y = 30
Drawing a line. You can draw a line by setting the Height or Weidth to 0
and add a frane. E.g. a horizontal line:
/: SIZE HEIGHT '0' MM WIDTH '200' MM
/: BOX FRAME 10 TW XPOS '11.21' MM YPOS '14.81' MM INTENSITY 100

Installing mini sap on windows 2003 server..............

hi friends,i want to install mini sap on windows 2003 server, i have two cds for that but i m not getting how to install this,n also want to know,can it be installed on windows 2003 server or it can be installed on windows 2000 only.
please help me out
thanks

Hi,
Depending on which mini sap version you are trying to install. If you have 2 CD's, it means that it is an old version, for starting with 6.2 mini sap comes in 3 CD's (1 Kernel + 2 Database). As for the steps to install, just insert the kernel cd and an HTML file will pop up with the steps you need to do before, during and after the installation. As for installation issues please refer to:
http://www.sap-press.com/support.cfm?account=&product=H958
Regards,
Lachker

Various SAP sessions/windows on one screen

Hi Gurus.
Can anyone help me with the following.
I have been asked to explore the possibility of having various SAP sessions/windows displayed on one screen. This should work out by creating a variant or other utility that can call several transactions and display all the sessions on one screen.
For example, you can have the following transactions SM04, SM66, SM37 & ST02 being called from one variant and display all the 4 sessions in one screen.
Is this possible or can it be achieved.
Points will be awarded.

nobody?

Documentation about SAP on Windows Cluster

Hello!
We are searching for appropriate documentation about SAP on Windows Cluster:
- administration of SAP on Windows Cluster with Oracle
- the process of kernel change
Any helpful information will be very appreciated.
Thank you!

Hello Tom,
I think the following link can be a good starting point for you:
[SAP on Microsoft Windows|SAP on Microsoft Windows]
You will find the info at the bottom of the screen under:
- Important SAP Notes on Windows
- SAP on Windows - Document Archive
Success.
Wim Van den Wyngaert

SAP and WINDOWS NT folders not there in Authentication under CMC

Hello All,
I recently installed BOJ Enterprise 3.1 SP3 and also installed Integration kit 3.1 SP3 in Linux_x86. In the initial logon screen i can see the SAP and WINDOWS NT in the drop down in the Authentication. But after selecting the Enterprise option to login CMS I selected Authentication to configure the BW Backend system but i cannot see SAP folder or Windows NT option. I cn only see Enterprise and LDAP option those are by default comes along with BOJ Enterprise 3.1.
Can anyone tell me why Iu2019m not able to see SAP and Windows NT in the CMS HOME --> Authentication
I'm able to publish BW but RFC also failing after creating using PROGRAM ID.
Any suggestions are appreciated
Thank you,
Vijay Reddy

When the CMS is on unix/linux the NT and Ad plugin are not loaded, it seems some sort of mistake that the dropdown appears for either of them.
On the SAP side if you don't see the plugin it indicates the integration kit or jco arenot installed properly/completely. That should work on either platform.
Regards,
Tim

SAP B1 window design

Hello,
A customer has asked me to request a change to be considered to the window design in a future release. When they resize the SAP B1 window and then close SAP B1 and reopen it, the applicaiton opens in full size rather than the size the user had made it when it was closed. Most other applications do this and the customer is finding it frustrating that they have to resize the window everytime they log in.
Many thanks,
Kate

Hi, Kate.
Could you please describe more about the case, especially about the use scenario? Before design, we have to know the reason why users need to resize B1 window and even keep its size.
Additionally, if the B1 window can be kept the size the user had made last time, how about the forms in B1? Do these forms also need to be kept the size when B1 is opened again? Form UX side, I think the answer is yes. The consistent UI solution is to keep all the window size users made in B1, not only B1 window.
Any comment is warmly welcomed.
Thanks,
Zhou Heng
From B1 UX

How to disable the archive logs in SAP IDES(Windows) using SQL Server

can any body tell us How to disable the archive logs in SAP IDES(Windows 2003) using SQL Server 2000.SP4.?

Hi,
Unfortunately, SQL Server does not have the option to turn off transaction logging. You can set the recovery mode to SIMPLE, instead of FULL. This will result in the transaction log being truncated on checkpoint.
http://support.microsoft.com/kb/873235 - check this microsoft article
This will help in reduction of the size of the transcation log.
- Regards, Dibya

Unable to locate SAP Tutor 2.2 as in Note 1071313 - SAP Tutor Windows

Hi all,
I wanted to download SAP Tutor 2.2. Note 1071313 - SAP Tutor Windows Vista Compatibiity guides me to:
SAP Tutor 2.2 is released for customers and can be downloaded from the following path:
service.sap.com/swdc-> Download -> Installations and Upgrades -> Entry by Application Group -> SAP Application Components -> SAP TUTOR -> SAP Tutor 2.2
But I am unable to find the file. It seems to have been moved. Any ideas?
Thanks
Ibrahim

Hi,
Go through below URL
http://help.sap.com/bp_autov1600/Auto_DE/html/index.htm
select business information-demo offering, here you will find SAP tutor
Thanks
chidambaram

Controlling SAP thro' Windows Comand line

Hi Everyone,
            Can anyone say how to Control SAP in Windows Command pmpt? Ex: Start Service, Stop Service ,Etc..
        Plz give in detail
Thnx
Siva

Hi Siva,
                Try this this is very important.
stopsap name=<SID> nr=<SYSNR> SAPDIAHOST=<host>
startsap name=<SID> nr=<SYSNR> SAPDIAHOST=<host>
OS Collector:
saposcol -k
Oracle Listener:
lsnrctl stop / start
Regards,
Hari. PS: Points are welcome

SAP witn Windows/SQL

Hi,
One of my feloow associates has SAP witn Windows/SQL and an external SQL database for Website purposes.
he can read a table from the external database and load it in a SAP table.
but he can't write the external table from SAP/ABAP.
How could he do it?

As it's explained in abaphelp for exec keyword) If you have update
rights to the external table, then
Exec sql.
Uptade table ...
Endexec
Or
Exec sql.
Insert into table (field list) values (value list)
Endexec.
Should do the task.
(you don't need to put the performing form part of the exec)
The exact sintax for update or insert varies from RDBMS to RDBMS (but
many of them rely on insert into to add new rows and update to change
current values stored in a given row.
If you have an internal table holding the values to be updated then a
loop like the following is mandatory:
loop at youritab
exec sql
<< Update routine in native sql >>
End exec
Endloop
Cheers,
Chaitanya.

What is SAP Maintenance Windows

Hi Gurus,
Client wants to have an overview of 'SAP Maintenance Windows for BW versions'. Could anyone guide me as to what is this and what am I expected to send?
Eagerly look towards you help.
Thanks in advance.

there is pdf on page, might this help
http://www.sap-press.de/katalog/buecher/titel/gp/titelID-1572?GalileoSession=62215028A3-1t0.jq.g

SAP GUI with SNC logon and Hummingbird Exceed - SAP GUI window size issue

We have discovered an issue when SAP GUI 7.10 is used to logon via SNC and Hummingbird Exceed is used on the same workstation to logon to a UNIX system either via x-windows or telnet.
When the user logs onto a UNIX system using Hummingbird Exceed, then uses SAP GUI to logon to a SAP system with SNC authentication, the SAP GUI authentication works, but the favourites list is not fully displayed and has to be resized before any of the entries are available.
Has anybody else seen this issue, and do they know if there is a fix available ? We wondered if there might be an issue with fonts or some other sort of conflict between Exceed and SAP GUI, but it is strange that the problem only occurs if SNC authentication is being used, and when userid+password is used to logon to SAP the problem does not occur.
Cheers,
Tim

Hello Tim and Wolfgang,
I was curious too as I found it interesting... so I tested a few combinations, but could not reproduce what Tim has described, at least not before my CPU reached 100% and the applications stopped responding (~2GHz processor, 1GB RAM, 48 kbps connection, latency ~ 2 x width of the Pacific Ocean, but Backend 7.00!).
However I did notice some indications which might be a help (based on 7.00!):
Back in 4.?? there was a problem in that large menus could not be searched(!). Sorry, I don't have access to SAP now, but from memory the note # was 444043 (or very similar) and introduced a form routine for large menus - from a printscreen I still have the message number which led me to the note - 'I476(S#)'.
The system certainly distinguishes between MENU_TYPEs and the above note corrections could be found in several locations relating to the SAP menu 'S', the role menu 'A' etc, but I could only see that for favourites 'F' this is implemented for the menu search (when searching, not when loading).
@ Tim: Ask you customer to create a favourites menu which only has 1 node or max 2 (certainly not more than 4!) and ~ 20 executable objects in it (not more than 30!)? Can they under any conditions achieve the described problem with such a menu?
If not possible to reproduce, then the closest I could guess is a maximum limit of 4 nodes and max 30 objects for a 'F'avourite menu, before it is a minimum candidate for "performance problems" and consideration to be converted to a role ('A'ctivity group) menu instead.
Sorry that I can only help by speculating, because I could not reproduce what you have described.
Hopefully this problem will not happen to me in the New Year, and hope you will solve it for the rest of the year
Cheers,
Julius
Updated memory (not RAM) by: Julius Bussche on Jan 3, 2008 9:07 AM

Dump error when clicked on text elements in SAP Script window

Hi All,
There is an inclusion in SAP Script. I have written the code in driver program. I need to pass the value to SAP Script in the requested position. But when I go to SE71 > Form Name > Change or Display > MAIN Window > Text Elements > I get a dump error.
Category               ABAP Programming Error
Runtime Errors         DATA_LENGTH_TOO_LARGE
Except.                CX_SY_RANGE_OUT_OF_BOUNDS
ABAP Program           SAPLSTXK
Application Component BC-SRV-SCR
Date and Time          30.04.2014 20:00:08
Short text
     Invalid partial field access: Length is too large
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXK" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_RANGE_OUT_OF_BOUNDS', was not
      caught in
     procedure "TOKEN_COMMENT" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
    The reason for the exception is:
    In the executed program "SAPLSTXK", the system attempted to access the field
    "ITF_TOKEN" of the type "C" and with the length 255 using the length 272.
    However, a partial field access with a length specification that is
    larger than the field length is not allowed.
How to correct the error
    Reduce the length used to access the field.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DATA_LENGTH_TOO_LARGE" "CX_SY_RANGE_OUT_OF_BOUNDS"
    "SAPLSTXK" or "LSTXKFRN"
    "TOKEN_COMMENT"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
2937 * todo empty comment ???
2938       if g_tm_open    eq true or     " Section
2939          g_tm_b_close eq true.
2940         l_token = '\chcbpat0'.
2941         l_len = strlen( l_token ).
2942         token_control = true.
2943         assign l_token to <itf1>.
2944         perform put_itf1_new using l_len.
2945         perform token_line_begin changing l_next_token.
2946       else.                          " without section
2947         concatenate '\chcbpat0\line' g_cf_string l_cbpat_token into l_token.
2948         l_len = strlen( l_token ).
2949         token_control = true.
2950         assign l_token to <itf1>.
2951         perform put_itf1_new using l_len.
2952       endif.
2953     elseif l_next_token-code eq ')L'.         " \par
2954       l_token = '\par'.
2955       l_len = strlen( l_token ).
2956       token_control = true.
2957       assign l_token to <itf1>.
2958       perform put_itf1_new using l_len.
2959     elseif l_next_token-code eq '(C' or       " \par + format
2960            l_next_token-code eq ')C' or
2961            l_next_token-code eq '(&' or
2962            l_next_token-code eq 'TA' or
2963            l_next_token-code eq 'SC' or
2964            l_next_token-code eq 'ST'.
2965       concatenate '\chcbpat0\par' g_pf_string g_cf_string l_cbpat_token into l_token.
2966       l_len = strlen( l_token ).
>>>>>       itf_token(l_len) = l_token.
2968       token_control = true.
2969       assign l_token to <itf1>.
2970       perform put_itf1_new using l_len.
2971     endif.
2972
2973 * Step 7: (L to disarm
2974   if g_compose eq true and
2975      l_next_token-code eq '(L'.
2976     perform read_next_itf_token(rstxscan) using p_token.
2977   endif.
2978
2979 ENDFORM.                    " token_comment
2980 *&---------------------------------------------------------------------*
2981 *&      Form create_lang_info
2982 *&---------------------------------------------------------------------*
2983 *       add default language to rtf
2984 *----------------------------------------------------------------------*
2985 *      -->P_HEADER text
2986 *      <--P_RESULT text
How do I open the text elements? I need to pass the variable inside SAP Script.
Please Help. The requirement is pending from very long. Not able to rectify this issue.
Regards,
Rekha

Hi,
There is a SAP Note about this problem
566794 - Runtime error: STRING_OFFSET_TOO_LARGE during conversion
Correction Instructions
Correction Instructions
Software Component
Valid from
Valid to
Number
SAP_BASIS
46B
46D
473267
SAP_BASIS
610
620
473185
Support Packages & Patches
Support Packages
Software Component
Release
Support Package
SAP_BASIS
46B
SAPKB46B48
46C
SAPKB46C39
46D
SAPKB46D28
610
SAPKB61027
620
SAPKB62014
Regards
Miguel

SAP standart window modification

Similar Messages

Maybe you are looking for