SAP STARTUP failed
Hi experts,
we installed databse in one machine and CI seerver in another machine.
i am trying to starting databse from CI iam getting below error
startsap
Checking SMS Database
Database is not available via R3trans
Database SMS must be started on remote server
Log on to remote server and start database
But databse is started in DB machine.
kindly give your suggestion to startsap
Edited by: vasu k on May 19, 2011 9:24 AM
Dear Vasu,
Please make sure that your database server is up dan running well.
After that you can check your SAP application connection (connection to SAP database) using R3trans :
Login to CI and run as <sid>adm user and run command R3trans -x
Example :
host:<sid>adm 3> R3trans -x
This is R3trans version 6.14 (release 700 - 05.03.09 - 08:28:00).
unicode enabled version
R3trans finished (0000).
ardhian
<removed by moderator>
Please place your personal infomation on your business card
Edited by: Juan Reyes on Jun 10, 2011 12:17 PM
Similar Messages
-
SAP STARTUP FAILED: TIMEOUT
HI,
I have SAP ECC6 EHP6 ON SYBASE ( it is High Availability system on RedHad Linux)
when I try to start SAP with startsap <VHOSTNAME>, i get the error
/home/SIDADM/startsap_ERS10 log
I had tried with other possible options like
> startsap <INSTANCE_NAME>
> startsap
it says no profiles found
my ERS log in /usr/sap/SID/ERS/work/disp_enrepsrv.log
[Thr 140737353979680] Fri Mar 21 17:44:43 2014
[Thr 140737353979680] Replication server start with instance number 00
[Thr 140737353979680] Enqueue server on host <VHOST>, IP-addr 192.168.1.204, port 50016
[Thr 140737353979680] ***LOG Q0I=> NiPConnect2: 192.168.1.204:50016: connect (111: Connection refused) [nixxi.cpp 3286]
[Thr 140737353979680] *** ERROR => NiPConnect2: SiPeekPendConn failed for hdl 1/sock 8
(SI_ECONN_REFUSE/111; I4; ST; 192.168.1.204:50016) [nixxi.cpp 3286]
[Thr 140737353979680] *** ERROR => EncNiConnect: unable to connect (NIECONN_REFUSED) [encomi.c 447]
[Thr 140737353979680] *** ERROR => RepServer: main: connect failed with return code -7 [enrepserv.cp 760]
need some light on this.
thanks & regards,
AmarHi Amarnath,
You mentioned that "No profiles found". Please check profiles are there in the directory (/sapmnt/ SID/profile)
As per logs,
[Thr 140737353979680] *** ERROR => EncNiConnect: unable to connect (NIECONN_REFUSED) [encomi.c
447]
Did u mention the hostname and ip address in /etc/hosts..
To analyze the issue, please provide dev_disp, dev_ms and dev_w0 in work directory
(/usr/sap/SID/DV*/work)
Regards
Santosh K -
DB startup failed when restart SAP sys
below was the error message when I restart my SAP sys.
Listener was running.
Oracle environment variables were correct.
Trying to start RD1 database ...
Log file: /home/rd1adm/startdb.log
/usr/sap/RD1/SYS/exe/run/startdb: Terminating with error code 12
DB startup failed
Please assist me regarding this.Log on to Sidadm user .
open a cmd prompt
type Sqlplus /nolog
connect /as sysdba
startup force
provide points
Regards
Balamurugan.P -
Connect to SAP Gateway failed.
Hello. When I setup the databridge it errors out. When I check for processes, it shows sapmsj2e as being on port 3601 in my services file. But I can't launch a webdyn pro or access my machine with the sap gui. Any ideas?
Heres the log file snipped
352 11/16/04 1:28:12 PM [SAPEngine_Application_Thread[impl:3]_12] INFO com.sap.lcr.webui.DPBridgeServlet: Data Supplier Bridge started.
#351 11/16/04 1:28:09 PM [JCO.ServerThread-97] DEBUG com.sap.lcr.sagent.SAPProxyServer: JCO exception processed.
#350 11/16/04 1:28:09 PM [JCO.ServerThread-97] DEBUG com.sap.lcr.sagent.SAPProxyServer: On server exception: Terminated thread.
#349 11/16/04 1:28:09 PM [JCO.ServerThread-97] DEBUG com.sap.lcr.sagent.SAPProxyServer: JCO Server exception received: Server startup failed at Tue Nov 16 13:28:09 PST 2004.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 1 seconds.
Could not start server: Connect to SAP gateway failed
Connect_PM TPNAME=SLD_NUC, GWHOST=orw-gharnish, GWSERV=sapmsJ2E
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR connection to partner broken
TIME Tue Nov 16 13:28:09 2004
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -6
MODULE ninti.c
LINE 784
DETAIL NiPRead (147.34.68.157/sapmsJ2E, hdl 1)
SYSTEM CALL recv
COUNTER 88
Thrown:
com.sap.mw.jco.JCO$Exception: Server startup failed at Tue Nov 16 13:28:09 PST 2004.
This is caused by either a) erroneous server settings, b) the backend system has been shutdown, c) network problems. Will try next startup in 1 seconds.
Could not start server: Connect to SAP gateway failed
Connect_PM TPNAME=SLD_NUC, GWHOST=orw-gharnish, GWSERV=sapmsJ2E
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR connection to partner broken
TIME Tue Nov 16 13:28:09 2004
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -6
MODULE ninti.c
LINE 784
DETAIL NiPRead (147.34.68.157/sapmsJ2E, hdl 1)
SYSTEM CALL recv
COUNTER 88Also. If I check my bridge connections it shows this:
[DOWN] JCO/RFC server threads
Is that related to the other problem?
Thanks, Graeme. -
Hi
I am using sap business one 8.8. PL 15.Windows 7
I get the following error when i start xl reporter on the Server.SAP Business one is installed only on the server and no client machines are installed.
An error occurred during the process "Report Initialize".Description: (667) MetaInfo.xml not found!(Please contact the administrator to fix the repository connection)
XL Reporter startup failed!
Regards
FarheenTry the below suggested procedure from an SAP Note
1. Find the directory in which you installed the program. This would normally be: C:\Program Files\SAP Manage\SAP Business One\AddOns\XLR\XLReporter.
2. In the Client folder, run the program file ConnectionManager.exe.
3. In the first window that appears, choose one of the following:
Database server administrator password has been changed
Choose this option if the database server password has been changed and you need to change the encrypted password
set in the meta data repository. Since the changes that you make with this option only affect the tables in the meta data
repository, you will only have to perform this operation once on one of the clients.
Database server name and/or administrator password has been changed
Choose this option if you have moved the database(s) to a new server and you need to change the server name and/or
administrator password set in the XL Reporter meta data repository. Since the changes you make with this option affect
both the tables in the XL Reporter meta data repository and the XL Reporter Metainfo.xml file in the installation directory, you
must perform this operation on each client running XL Reporter.
4. Choose Next to continue.
5. Enter the following information:
In the Server field, enter the name of the new server. (This option is only available if you have selected the option, "Database server name and/or administrator password has been changed", in step 3 above.)
In the User field, enter a new user only if the user has changed on the database server. (This option is only availible if you have selected the option, "Database server name and/or administrator password has been changed", in step 3 above.)
In the Password field, enter a valid password.
6. Choose Next to continue. When the process is complete, the Operation Finished window appears.
The status information at the bottom of the window gives you information about the actions performed.
7. Choose Finish to exit. -
PA30, WP restarted, SAP commit failed
Hi,
I am trying to update some users record in PA30. but the changes are not getting saved, and it is throwing the error:
Workprocess restarted, when looked at sm21 logs:
POKALENA PA30 Q02 Stop Workproc 0, PID 7688
Q01 Start Workproc 0, 3 times since system startup. PID 8469
POKALENA PA30 R47 Delete session 001 after error 023
POKALENA PA30 R38 Error at DB commit, return code 001024
POKALENA PA30 R18 SAP Commit Failed
POKALENA PA30 Q02 Stop Workproc 0, PID 8469
Q01 Start Workproc 0, 4 times since system startup. PID 13646
POKALENA PA30 R47 Delete session 001 after error 023
But this is working fine in other system, only problem with this UAT system
Any thoughts please.
Thanks,
GoudaHi,
This problem occurs in the following cases:
1. Insufficient heap memory.
2. Table lock.
To know more about heap memory, and troubleshoot the issue further, check the following website:
http://help.sap.com/saphelp_bw30b/helpdata/en/02/9626a6538111d1891b0000e8322f96/content.htm
However, if there are no issues with the heap memory, you can see if there is a lock entry on the tables.
This should resolve the issue. -
my system logon failed .
i am not able to logon to my ides system. server is starting but while logging into the system by using user name and passward
the following error is coming
user account not in validity date
some other information is also available
logon to SAP system failed
the system description "NEW" cannot be found in the system list.
Make sure that saplogon.ini exists and choose an existing system description in the system list.
RegardsCheck with your Basis. Your account validity is expired. Ask them to increase the validity.
The INI also does not exist on your system. Take the file from Basis and paste it on your PC.
Arti -
SAP_CMINIT3 : rc=20 Connect to SAP gateway failed when connecting SAP CR
Dear SAP Gurus,
I have the follwowing issue when I try to access SAP Crystal Reports 2011 on my desktop.
I can access the SAP ERP 6.0 back-end system without problem, but when I try to connect to SAP Crystal Reports, as soon as I enter my login details, I get the following error message:
Logon Failed.
Details: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=192.12.353.12, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner 192.12.353.12:3300' not reached
TIME Thu Oct 27 12:02:17 201
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10060
ERRNO TEXT WSAETIMEDOUT: Connection timed out
COUNTER 3
I can login to SAP Crystal Reports using other desktops, but cannot access using my own. This is the same for other people, they also cannot access using my desktop.
Thanks in advance, MarcHI Mark,
Are you and Ramish working together?
See this post for your answer: Connection keeps failing
Don -
Sol Man 4.0 Installation Error ECJS-30196 Connect to SAP gateway failed
Hi Experts
I am trying to install Solution Manager 4.0.
While installing SolMan, everything goes fine, until step # 31 create java users (creating SAP Jsf user), then it runs into below error messages.
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1LOCATION CPIC (TCP/IP) on local host with UnicodeERROR partner 'solman:sapgw23' not reachedTIME Mon Aug 13 17:44:59 2007RELEASE 700COMPONENT NI (network interface)VERSION 38RC -10MODULE nixxi.cppLINE 2770DETAIL NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT WSAECONNREFUSED: Connection refusedCOUNTER 1
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Mon Aug 13 17:17:35 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -5
MODULE gwxx.c
LINE 480
DETAIL timeout 60000 msecs
SYSTEM CALL NiRead
COUNTER 1
Any suggestions/ideas for this error
Regards
RahulHi Experts
I am trying to install Solution Manager 4.0.
While installing SolMan, everything goes fine, until step # 31 create java users (creating SAP Jsf user), then it runs into below error messages.
CJS-30196 Connect to SAP gateway failedConnect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1LOCATION CPIC (TCP/IP) on local host with UnicodeERROR partner 'solman:sapgw23' not reachedTIME Mon Aug 13 17:44:59 2007RELEASE 700COMPONENT NI (network interface)VERSION 38RC -10MODULE nixxi.cppLINE 2770DETAIL NiPConnect2SYSTEM CALL connectERRNO 10061ERRNO TEXT WSAECONNREFUSED: Connection refusedCOUNTER 1
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|3|0|createJSF was executed with status ERROR .
CJS-30196 Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=solman SYSNR=23 GWHOST=solman GWSERV=sapgw23 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR timeout occured
TIME Mon Aug 13 17:17:35 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -5
MODULE gwxx.c
LINE 480
DETAIL timeout 60000 msecs
SYSTEM CALL NiRead
COUNTER 1
Any suggestions/ideas for this error
Regards
Rahul -
RFC logon failed with message: Failed: Connect to SAP gateway failed
I installed CI instance fine and i am stopped here with this error at the end of DB instance install. Could someone let me know what could be the reason for this. Is there any fix or workaround to continue the install.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
CAbRfcImpl::setRfcConnectParam
RFC parameter ASHOST set to value hostSAP.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:398]
CAbRfcImpl::setRfcConnectParam
RFC parameter SYSNR set to value 09.
INFO 2006-09-16 01:13:02 [iaxxrfcimp.cpp:543]
CAbRfcImpl::checkConnectInfo
RFC connection information checked successfully.
ERROR 2006-09-16 01:13:02 [iaxxrfcimp.cpp:450]
CAbRfcImpl::openRfcConn
FRF-00007 Unable to open RFC connection.
ERROR 2006-09-16 01:13:02
CJSlibModule::writeError_impl()
FRF-00063 RFC logon failed with message: Failed: Connect to SAP gateway failed
Connect_PM GWHOST=hostSAP, GWSERV=sapgw09, ASHOST=hostSAP, SYSNR=09
LOCATION CPIC (TCP/IP) on local host
ERROR partner not reached (host hostSAP, service 3309)
TIME Sat Sep 16 01:13:02 2006
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r_mt.cpp
LINE 8528
DETAIL NiPConnect
SYSTEM CALL connect
ERRNO 146
ERRNO TEXT Connection refused
COUNTER 4
Thanks,
Ramat the end of the database instance installation SAPInst is doing some RFCs to the CI.
The logfile states that the gateway on host hostSAP with the systemnumber 09 is not reachable.
Please check if you have started the central instance on this machine.
peter -
Connect to SAP gateway failed - internal error
Hi, I've developed a simple .NET application that connects to a SAP system and makes a function call using a SAP Connector Proxy object. Everything works fine in my workstation, but deployment doesn't. I'm also deploying the following libraries: SAP.Connector.dll, SAP.Connector.Rfc.dll and librfc32.dll.
The fact is that deployment works fine in some servers, but not in others. I've checked that .NET Framework is installed (both versions, 1.1 and 2.0). I've checked the "WINDOWS\system32\drivers\etc\services" file. What else should I check? Any idea? Every suggestion would be appreciated.
The error message is the following:
Connect to SAP gateway failed Connect_PM GWHOST=xxx.xxx.xxx.xxx, GWSERV=sapgw00, ASHOST=xxx.xxx.xxx.xxx, SYSNR=00 LOCATION CPIC (TCP/IP) on local host ERROR internal error TIME Mon Nov 13 16:23:08 2006 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -1 COUNTER 1
And the connection string:
CLIENT=100 USER=****** PASSWD=****** LANG=EN ASHOST=xxx.xxx.xxx.xxx SYSNR=0
Thanks in advanceHi Daniel,
Can you connect to the particular system by using SAPGUI ?
if yes, then your librfc32 file is working fine.
NCo internally consumes it's functions.
Other points to check are
1> service name as appears from within the r/3 system [transaction : smgw]
2> NCo 2.0 uses .net 1.1 & nCo 2.5 uses .net 2.0, do you have both versions running parallely ?
3> gateway errors are infrastructure issues, please verify your firewall settings for the relevant protocols : http / https & also sap ports 3300 onwards.
the services file you have checked will list the ports that need to be opened on the firewall [in the case of multi - domain applications]
4> check in your 'hosts' file [same directory as your 'services' file]
This file contains the mappings of IP addresses to host names. Each
entry should be kept on an individual line. The IP address should
be placed in the first column followed by the corresponding host name.
The IP address and the host name should be separated by at least one
space.
Additionally, comments (such as these) may be inserted on individual
lines or following the machine name denoted by a '#' symbol.
For example:
102.54.94.97 rhino.acme.com # source server
38.25.63.10 x.acme.com # x client host
with respect,
amit -
Connect to SAP gateway failed during Installatio(SAP 2004s with Oracle10.2)
Hi,
I am doing SAP 2004S installation with Oracle10.2
Oracle installation completed.
SAP installation completed till step : ABAP post installation (28 out of 43 completed)
Now I am stuck in Check DDIC Password phase.
but my problem is not able to start Sap instance.
dev_rfc.trc says...
>TS> Mon Jul 13 11:34:02 2009
T:612 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ANK, GWHOST=INLD50057853A, GWSERV=3301
LOCATION CPIC (TCP/IP) on local host
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Mon Jul 13 11:34:02 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -8
MODULE nixx.c
LINE 1537
DETAIL NiCloseHandle: invalid hdl -1
COUNTER 12
>TS> Mon Jul 13 11:35:03 2009
T:612 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.ANK, GWHOST=INLD50057853A, GWSERV=3301
LOCATION CPIC (TCP/IP) on local host
ERROR internal error
(this retcode should be handled by caller of NI-layer)
TIME Mon Jul 13 11:35:03 2009
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -8
MODULE nixx.c
LINE 1537
DETAIL NiCloseHandle: invalid hdl -1
COUNTER 14
Could you please let me know what is problem here...where can I adjust gateway if it is the only problem.
Thanks,
Regards,
Ankit Baphnaalso dispatcher log says...
ue Jul 14 16:31:05 2009
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1611]
***LOG Q0K=> DpMsAttach, mscon ( INLD50057853A) [dpxxdisp.c 11163]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 33
Release check o.K.
Tue Jul 14 16:31:45 2009
ERROR => W0 (pid 5556) died [dpxxdisp.c 13748]
ERROR => W1 (pid 2768) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 4376) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 3708) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 5392) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W5 (pid 1544) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W6 (pid 3872) died [dpxxdisp.c 13748]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5556 (SIGUSR2)
ERROR => DpWpKill(5556, SIGUSR2) failed [dpxxtool.c 2586]
killing W1-2768 (SIGUSR2)
ERROR => DpWpKill(2768, SIGUSR2) failed [dpxxtool.c 2586]
killing W2-4376 (SIGUSR2)
ERROR => DpWpKill(4376, SIGUSR2) failed [dpxxtool.c 2586]
killing W3-3708 (SIGUSR2)
ERROR => DpWpKill(3708, SIGUSR2) failed [dpxxtool.c 2586]
killing W4-5392 (SIGUSR2)
ERROR => DpWpKill(5392, SIGUSR2) failed [dpxxtool.c 2586]
killing W5-1544 (SIGUSR2)
ERROR => DpWpKill(1544, SIGUSR2) failed [dpxxtool.c 2586]
killing W6-3872 (SIGUSR2)
ERROR => DpWpKill(3872, SIGUSR2) failed [dpxxtool.c 2586]
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1673
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Jul 14 16:31:55 2009
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Tue Jul 14 11:01:55 2009
========================
and syslog says...
SAPBasis:MEssage server disconnected
SAP Gateway closed
Database error: 1017 at CON
ORA01017: invalid username/password; logon denied
Which username is this referring to?
Regards,
Ankit Baphna
Edited by: I041468 on Jul 14, 2009 1:09 PM -
Connect to SAP gateway failed Connect_PM TYPE=B
Hi experts,
I get the following error when i ping through JCO destinations on portals.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=B MSHOST=imtsapdev01 GROUP=CLUST R3NAME=DMI MSSERV=sapmsDMI PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '127.0.0.1:3310' not reached TIME Tue Jan 27 16:39:54 2009 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -10 MODULE nixxi.cpp LINE 2823 DETAIL NiPConnect2 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER 1
However my JCO destinations were working perfectly until recently. I checked on the logon group. I have one called CLUST, which i use for this purpose.
I have also checked both service files and they have the following for the ECC server im connecting to.
3610 because its system number 10 i am connecting to.
sapmsDMI 3610/tcp
From the JCE destinations screen i cannot even ping the server. I can though when i log on to the server through remote desktop.
thanks and regards
dilanke
as a reply to nishants posts.
goto rz70
give hostname -->
service --> sapgw00 (sapgw(instance number)
execute it
click on yes
check rfc call (success or failed)
I have done this. i left hostname as "blank" gave service as "sapgw10"
The following is what i got as the output.
0: IMTSAPDEV01_DMI_10 : Execute program: SLDRFC
0: IMTSAPDEV01_DMI_10 : Execute program: SLDMSGSRV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDIPSERV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDINSTSP
0: IMTSAPDEV01_DMI_10 : Execute program: SLDINSTSC
0: IMTSAPDEV01_DMI_10 : Execute program: SLDGWSRV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDDBSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDCOMPSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDCLIENT
0: IMTSAPDEV01_DMI_10 : Execute program: SLDBCSYS
0: IMTSAPDEV01_DMI_10 : Execute program: SLDAPPL_SERV
0: IMTSAPDEV01_DMI_10 : Execute program: SLDASSOC
0: IMTSAPDEV01_DMI_10 : Collection of SLD data finished
0: IMTSAPDEV01_DMI_10 : Data collected successfully
0: IMTSAPDEV01_DMI_10 : RFC data prepared
0: IMTSAPDEV01_DMI_10 : Used RFC destination: SLD_NUC
0: IMTSAPDEV01_DMI_10 : RFC call failed: Error opening an RFC connection.
0: IMTSAPDEV01_DMI_10 : Existing periodic jobs removed. Number: 1
0: IMTSAPDEV01_DMI_10 : Program scheduled: 20090127 184357
1: IMTSAPDEV01_DMI_10 : Event-controlled job already exists; scheduling not necessary
so i guess its not successful. when i look at rz70 of a server where this works correctly its not succsessful either
if it is success then technical system name will be in sld
to restart sld --> /sld --> administration --> stop server --> restart server
or check in VA --> SLD data supplier value --> Runtime
I checked this and i do not see aa problem. you have configuration status as valid and send reult as Success
Services file is locted on OS level of R3 system--> Goto --> Start --> Run -> (type)Drivers(enter) --> etc -> (here is services file)
check ur r/3 server entry is there or not,
I have the followng in the service file for the server
sapmsDMI 3610/tcp
if not add itHi Experts,
when ilook at the remote gateway properties in SMGW this is what i see on the R/3 server. ive looked at my other system which i can connect to and there isnt much of a difference in the parameters. How can test this to see if it works?
Details of remote gateway
entry = 0
state = CONNECTED
local = 1
system type = REMOTE_GATEWAY
client = FALSE
wait for frag write = 0
suspended = 0
read/write socket = 4
HANDLE = 4
TIME = Sun Oct 19 18:54:14 2008
SOCKET = 1352
STAT = NI_CONNECTED
TYPE = STREAM IPv4
OUT = 48225 messages 48225 bytes
IN = 1 messages 64 bytes
LOCAL = 127.0.0.1:3310
REMOTE = 127.0.0.1:1297
OPTIONS =
connect = Sun Oct 19 18:52:17 2008
last request = Thu Jan 29 13:09:58 2009
conversation no = 0
thanks and regards,
dilanke -
Connect to SAP gateway failed Connect_PM TYPE=A
In past 4-5 days, some of messages are not processed in our XI production server.
I got the following error in the falied messages:
Seem to be some parameter need to be update for sap gateway.
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=dbcinpr SYSNR=15 GWHOST=dbcinpr GWSERV=sapgw15 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR connection to host dbcinpr, service sapgw15 timed out TIME Sun Oct 21 09:09:50 2007 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -12 MODULE nixxi_r_mt.cpp LINE 1067 DETAIL NiPConnect COUNTER 1</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
Pls let us know if it is parameter related prolem or some other issue.
Regards
AmarHi Amar!
Test the status of the RFC destinations in transaction SM59 of XI and R/3 systems.
Also check this thread, I think they might be helpful:
Communication channel not working
RFC Receiver Adapter Error
JCO Destination creation error
RFC_ERROR_COMMUNICATION - time out
Reg Jco connections
RFC Adaptive Model,JCO destinations error
Regards,
Matias
PS: please award points if helpful. -
RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
HI All,
Im getting the following error while trying to call a RFC through JCO.
{0}#1#com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=R3ip SYSNR=00 GWHOST=R3ip GWSERV=sapgw00 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR hostname 'R3ip' unknown
TIME Thu May 15 12:13:36 2008
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -2
MODULE niuxi.c
LINE 1529
DETAIL NiPGetHostByName2: hostname 'R3ip' not found
SYSTEM CALL gethostbyname_r
COUNTER 1
I know it has something to do with the entries in the services and hosts files of the portal server. Please guide me on links from help.sap.com on this.HI Dagfinn,
Very helpful answer. Thanks.
When you say :
4. Normally, the sap system should be registered in DNS, and you should need any. --- How do I check if my SAP system is registerd in the DNS? Is there some detail explaination on this.
Also,
I have these observations :
1. I checked the services file on my portal server and the entry for "sapgw00 3300/tcp" is maintained there.
2. There is no entry of my SAP ECC box in the hosts file of my portal server.
3. The group PUBLIC is not maintained in SMLG transaction.
4. I am using R3ip only in my code, there is no other place that this "R3ip" is being used.
Following is my code :
import com.sapportals.htmlb.page.*;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.event.*;
import com.sapportals.portal.htmlb.page.*;
import com.sapportals.portal.prt.component.*;
import com.sapportals.portal.prt.resource.IResource;
import com.sapportals.portal.prt.session.*;
import java.math.*;
import java.util.*;
import java.util.Calendar;
import com.sapportals.portal.prt.service.jco.IJCOClientService;
import com.sap.mw.jco.JCO;
import com.sapportals.portal.prt.service.jco.IJCOClientPoolEntry;
import com.sap.mw.jco.IFunctionTemplate;
import com.sap.mw.jco.IRepository;
public class ReadModelData extends PageProcessorComponent {
public DynPage getPage(){
return new ReadModelDataDynPage();
public static class ReadModelDataDynPage extends JSPDynPage{
private class4bean class4bean = null;
protected IPortalComponentRequest request;
protected IPortalComponentSession session;
protected IPortalComponentContext context;
protected IPortalComponentProfile profile;
protected String userId;
protected String sapSystem;
private final static int INITIAL_STATE = 0;
private final static int OUTPUT_STATE = 1;
private final static int ERROR_STATE = 2;
private int state = INITIAL_STATE;
public void doInitialization(){
System.out.println("cpCv - Code is rendered: " + Calendar.getInstance().getTime().toString());
state = INITIAL_STATE;
DefaultTableViewModel tvm = new DefaultTableViewModel();
tvm = getData();
//class4bean = new class4bean();
class4bean.setModel(tvm);
session.putValue("class4bean", class4bean);
public DefaultTableViewModel getData() {
com.sap.mw.jco.IRepository repository;
JCO.Pool pool = JCO.getClientPoolManager().getPool("R3");
/* if (pool == null) {
// JCO.removeClientPool("R3");
JCO.addClientPool(
"R3",
10,
"040",
USER,
PWD,
"EN",
"R3ip",
"00");
if (pool == null) {
// JCO.removeClientPool("R3");
JCO.addClientPool(
"R3",
10,
"040",
"uname",
"pwd",
"EN",
"portalserver",
"40");
repository = JCO.createRepository("TTL", "R3");
JCO.Client client = null;
// Get a function template from the repository
IFunctionTemplate ftemplate =
repository.getFunctionTemplate("BAPI_SALESORDER_GETSTATUS");
// Create a function from the template
JCO.Function function = ftemplate.getFunction();
client = JCO.getClient("R3");
JCO.ParameterList input = function.getImportParameterList();
input.setValue("0053100700", "SALESDOCUMENT");
client.execute(function);
JCO.Table sales_orders =
function.getTableParameterList().getTable("STATUSINFO");
Vector row = new Vector();
Vector tbl = new Vector();
Vector colNames = new Vector();
// Loop over all rows
do {
// Loop over all columns in the current row
for (JCO.FieldIterator e = sales_orders.fields();
e.hasMoreElements();
JCO.Field field = e.nextField();
row.add(field.getString());
// System.out.println(field.getName() + ":\t" + field.getString());
} //for
tbl.add(row);
} while (sales_orders.nextRow());
sales_orders = null;
sales_orders =
function.getTableParameterList().getTable("STATUSINFO");
sales_orders.nextRow();
for (JCO.FieldIterator e = sales_orders.fields();
e.hasMoreElements();
JCO.Field field = e.nextField();
colNames.add(field.getName().toString());
DefaultTableViewModel dtvModel = new DefaultTableViewModel(tbl, colNames);
JCO.releaseClient(client);
return dtvModel;
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
class4bean myBean = new class4bean();
((IPortalComponentRequest)getRequest()).getServletRequest().setAttribute("myBean", myBean);
// fill your bean with data here...
this.setJspName("testJSP_.jsp");
Maybe you are looking for
-
Windows server 2008 r2 virtual machine uses much less memory then it has assigned
Guys, I had a virtual machine with windows 2008 r2 operating system, running sharepoint, on a server where it had 6gb RAM memory assigned. Now I bought a new server, which has 32 gb of ram. I moved my virtual machine there, and assigned 24gb of RAM.
-
Xml attributes - importing and displaying in InDesign document to print
Hello! I am importing XML into InDesign. I need to display the metadata within the attributes in the document that will be printed . For example, if I'm creating a lesson plan and the "Toady's Lesson" tag has the attributes of: "lesson 2", "Day 2", "
-
Reg: My photo is not showing in my business Card
Dear All, In my profile i am uploading my photo as the way of https://wiki.sdn.sap.com/wiki/download/attachments/21693264/251220071326.jpg this URL i given in my personal URL. And it will be showing in my business card. when other persons are clickin
-
Very strange index.jsp problem (Apache2 + Jboss/Tomcat)
I've been working on this for 6 hours until the current time of 4.30 am - any help is very much appreciated. I (thought) I had successfully integrated Jboss/Tomcat with apache 2 using mod_jk 1.2.8 - and added an alias for jmx-console. But I just can'
-
Tabular Form : Select list : onchange event
I need a method / example to apply an Onchange event to a Select List in Tabular form. Whenever an item from the select list is selected, the data from other column of the same or different Table should get displayed, in a Textfield of the Tabular fo