SAP stop after of the start
Dear Gurus!!!!
I've executed an system copy homogeneous, but when I executed start SAP, this stop wp's.
In the trace of the Developer trace of the disp+work shows me the following message:
trc file: "dev_disp", trc level: 1, release: "640"
Mon Feb 19 21:01:18 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 561 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII, 64 bit
pid 6104
***LOG Q00=> DpSapEnvInit, DPStart (01 6104) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Mon Feb 19 21:01:22 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 6624 (828)
DpShMCreate: sizeof(tm_adm) 2847776 (14168)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 212000 (424)
DpShMCreate: sizeof(vmc_adm) 0 (400)
DpShMCreate: sizeof(wall_adm) (25648/36736/64/104)
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000E970050, size: 3159136)
DpShMCreate: allocated sys_adm at 000000000E970050
DpShMCreate: allocated wp_adm at 000000000E971850
DpShMCreate: allocated tm_adm_list at 000000000E973230
DpShMCreate: allocated tm_adm at 000000000E973260
DpShMCreate: allocated wp_ca_adm at 000000000EC2A680
DpShMCreate: allocated appc_ca_adm at 000000000EC2ECD0
DpShMCreate: allocated comm_adm_list at 000000000EC30440
DpShMCreate: allocated comm_adm at 000000000EC30460
DpShMCreate: allocated vmc_adm_list at 000000000EC64080
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000EC640B0
DpShMCreate: allocated wall_adm at 000000000EC640C0
MBUF state OFF
Mon Feb 19 21:01:23 2007
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( SRV01037) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Mon Feb 19 21:02:06 2007
ERROR => W0 (pid 4596) died [dpxxdisp.c 12187]
ERROR => W1 (pid 4396) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W2 (pid 4208) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W3 (pid 4244) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W4 (pid 4236) died [dpxxdisp.c 12187]
ERROR => W5 (pid 4476) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W6 (pid 3412) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W7 (pid 4332) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-4596 (SIGUSR2)
ERROR => DpWpKill(4596, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-4396 (SIGUSR2)
ERROR => DpWpKill(4396, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-4208 (SIGUSR2)
ERROR => DpWpKill(4208, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-4244 (SIGUSR2)
ERROR => DpWpKill(4244, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-4236 (SIGUSR2)
ERROR => DpWpKill(4236, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-4476 (SIGUSR2)
ERROR => DpWpKill(4476, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-3412 (SIGUSR2)
ERROR => DpWpKill(3412, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-4332 (SIGUSR2)
ERROR => DpWpKill(4332, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:19 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Feb 20 02:02:19 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 4596 Ended no 1 0 0
1 DIA 4396 Ended no 1 0 0
2 UPD 4208 Ended no 1 0 0
3 ENQ 4244 Ended no 1 0 0
4 BTC 4236 Ended no 1 0 0
5 BTC 4476 Ended no 1 0 0
6 SPO 3412 Ended no 1 0 0
7 UP2 4332 Ended no 1 0 0
Dispatcher Queue Statistics Tue Feb 20 02:02:19 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 13
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue Feb 20 02:02:19 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Tue Feb 20 02:02:19 2007
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:25 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (2896) (SOFT_KILL)
Stop icman
killing process (4624) (SOFT_KILL)
Terminate gui connections
[DpProcDied] Process lives (PID:2896 HANDLE:1284)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:26 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:2896 HANDLE:1284)
[DpProcDied] Process lives (PID:4624 HANDLE:1276)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:27 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:4624 HANDLE:1276)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:28 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:4624 HANDLE:1276)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:30 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:4624 HANDLE:1276)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:31 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:4624 HANDLE:1276)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:32 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:4624 HANDLE:1276)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:33 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:4624 HANDLE:1276)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:34 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:4624 HANDLE:1276)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:36 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:4624 HANDLE:1276)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:37 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process lives (PID:4624 HANDLE:1276)
waiting for termination of icman
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1317
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Mon Feb 19 21:02:38 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:4624 HANDLE:1276)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'SRV01037'
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/8
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1296
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 6104) [dpxxdisp.c 8495]
Good Bye .....
And in the trace shows me the message
>TS> Mon Feb 19 21:08:30 2007
T:3484 ======> Connect to SAP gateway failed
Connect_PM TPNAME=IGS.DET, GWHOST=SRV01037, GWSERV=3301
ERROR partner not reached (host 192.168.9.225, service 3301)
TIME Mon Feb 19 21:08:30 2007
RELEASE 640
COMPONENT NI (network interface)
VERSION 37
RC -10
MODULE nixxi_r.cpp
LINE 8593
DETAIL NiPConnect2
SYSTEM CALL SiPeekPendConn
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 8
Please, your help me
HI Luis,
This may be due to Network related problem with DNS server, better to take help of your network team to resolve this.
Please refer these notes for detailed infol
525900 - GZZ > 1 possible network problems detected
501902 - Error in the SAP dispatcher
124562 - Hostname resolution problems (DNS timeouts)
Cheers,
Shaym
Similar Messages
-
How will be outbound data structure in sap xi after executing the stored pr
Hi All
can any one please tell me how will be outbound data structure in sap xi after executing the stored procedure by sender JDBC adapter?
Thanks in advance
regards
RamsHi..
My stored procedure is select and it will be OUTBOUND in PI.
is it will be same as following
<resultset>
<row>
<column-name1>column-value</ column-name1>
<column-name2></column-name2>
<column-name3>column-value</ column-name3>
<column-name4></column-name4>
</row>
<row>
<column-name1>column-value</ column-name1>
<column-name2></ column-name2>
</row>
</resultset>
Regards
Rams
Edited by: Rameshkumar Varanganti on Oct 15, 2008 12:04 PM -
Stop sign in the start process of process chain
Hi Team,
We are seeing a 'stop sign' in the Start process of a 'Process Chain'. Normally there's a green tick. Any idea why ? We did manually post a day's data.
Thanks,
R Toption 1. right click and display all jobs. If you see two released jobs, delete one of them. Also check the validity on the user-id of the scheduled job.
option 2. activate & schedule the pc again. If it still shows red stop. right click & get more info from the message long text. May be the start process is deleted somehow.
Kumar Gudiseva. -
My MacMini does not stop after giving the order ''switch off''.What can I do?
My MacMini does not stop after giving the order ''switch off''.
It stops only, after pushing the button ''on/off'' for some seconds.
What can I do?
frahsunboot the Mac into safe mode, repair permissions while in it, then reboot normally.
if that doesn't help, try resetting the System Management Controller (SMC). -
SAP XI server0 stopping after trying to start
Hi All ,
I'm really new to SAP , recently my SAP XI development server (Java Stack) stopped and when i check the log It gives this error when it try to start services , anyone has any idea on this ?
service dbpool ================= ERROR =================
Core service dbpool failed. J2EE Engine cannot be started.
java.lang.NoClassDefFoundError: com.sap.sql.trace.cpt.impl.SQLTraceCptRecordImpl
at java.lang.Class.initialize(Class.java:307)
at com.sap.sql.trace.cpt.impl.CPTHelperImpl.isCptTraceActive(CPTHelperImpl.java:83)
at com.sap.sql.trace.cpt.CPTHelper.isCptTraceActive(CPTHelper.java:50)
at com.sap.sql.trace.SQLTrace.isOnCPT(SQLTrace.java:392)
at com.sap.sql.trace.SQLTrace.isOn(SQLTrace.java:386)
at com.sap.sql.jdbc.direct.DirectPreparedStatement.setLong(DirectPreparedStatement.java:481)
at com.sap.engine.core.configuration.impl.persistence.rdbms.DBAccessDefault.getConfiguration(DBAccessDefault.java:603)
at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandler.readConfig(PersistenceHandler.java:77)
at com.sap.engine.core.configuration.impl.cache.CachedConfiguration.<init>(CachedConfiguration.java:60)
at com.sap.engine.core.configuration.impl.cache.ConfigurationCache.getCachedConfiguration(ConfigurationCache.java:848)
at com.sap.engine.core.configuration.impl.ConfigurationHandlerImpl.getCachedConfiguration(ConfigurationHandlerImpl.java:373)
at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getData(ReadAccessConfiguration.java:84)
at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getMetaData(ReadAccessConfiguration.java:211)
at com.sap.sql.connect.OpenSQLConfiguration.syncConnProperties(OpenSQLConfiguration.java:349)
at com.sap.sql.connect.OpenSQLConfiguration.syncRootProperties(OpenSQLConfiguration.java:329)
at com.sap.sql.connect.OpenSQLConfiguration.<init>(OpenSQLConfiguration.java:147)
at com.sap.sql.connect.OpenSQLConfiguration.getInstance(OpenSQLConfiguration.java:160)
at com.sap.sql.connect.OpenSQLConnectionFactory.dataSourceStateChanged(OpenSQLConnectionFactory.java:271)
at com.sap.engine.services.dbpool.deploy.ContainerImpl.startDataSource(ContainerImpl.java:1536)
at com.sap.engine.services.dbpool.deploy.ContainerImpl.createDefaultDataSource(ContainerImpl.java:760)
at com.sap.engine.services.dbpool.PoolFrame.start(PoolFrame.java:94)
at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:79)
at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:150)Hi Désirée,
Thanks soo much for your reply
There's folder wchich is having the same name as the one you mentioned here in the below directory
/usr/sap/XID/DVEBMGS01/j2ee/cluster/server0/temp/cpt
so doest it still needs to be restarted ?
Ahamed I'll follow the process you asked and let you know.....
Thanks Both for the replies -
Execution stops after retrieving the factory from the ServletContext while
Hi,
I just started working with Quartz, so I am clueless as to why I am getting this error. This is my first time tying to integrate Quartz 1.6.0 in a web app. I am using the JSF Framework. Although I have added the necessary jars I am still getting the error above: servlet.jar not loaded. If you follow the java code and server output you can see that after retrieving the factory from the ServletContext there is no further execution . Following is the definition of the class used for scheduling:
Quartz Version: 1.6.0
IDE : Netbeans 5.0
AppServer: Tomcat 5.5
*************************************** JAVA CODE *************************************
* BirthdayScheduler.java
* Created on May 20, 2008, 5:24 PM
package com.csg.cs.cscomwebdev.servlet.timer;
import java.io.*;
import java.net.*;
import java.util.Date;
import javax.servlet.*;
import javax.servlet.http.*;
import org.quartz.JobDetail;
import org.quartz.SchedulerException;
import org.quartz.SimpleTrigger;
import org.quartz.impl.StdSchedulerFactory;
import org.quartz.Scheduler;
* @author Arijit Datta
* @version
public class BirthdayScheduler extends HttpServlet {
/** Processes requests for both HTTP <code>GET</code> and <code>POST</code> methods.
* @param request servlet request
* @param response servlet response
protected void processRequest(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html;charset=UTF-8");
PrintWriter out = response.getWriter();
out.close();
/** Handles the HTTP <code>GET</code> method.
* @param request servlet request
* @param response servlet response
protected void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Handles the HTTP <code>POST</code> method.
* @param request servlet request
* @param response servlet response
protected void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
processRequest(request, response);
/** Returns a short description of the servlet.
public String getServletInfo() {
return "Short description";
public void init()
System.out.println(" ------------ STARTTING JOB --------------");
// Retrieve the ServletContext
ServletContext theApplicationsServletContext = this.getServletContext();
// Retrieve the factory from the ServletContext
StdSchedulerFactory factory =(StdSchedulerFactory)theApplicationsServletContext.getAttribute("QuartzFactory Servlet.QUARTZ_FACTORY_KEY");
System.out.println(" ------------ FACTORY GOT --------------");
try {
// Retrieve the scheduler from the factory
Scheduler scheduler = factory.getScheduler();
System.out.println(" ------------ SCHEDULER GOT --------------");
// Start the scheduler
scheduler.start();
System.out.println(" ------------ SCHEDULER STARTED --------------");
//Creating a job
JobDetail birthdayJobDetail = new JobDetail("birthdayReminderJob", scheduler.DEFAULT_GROUP, BirthdayReminderJob.class );
System.out.println(" ------------ JOB CREATED --------------");
//Creating a trigger
SimpleTrigger birthdayJobtrigger = new SimpleTrigger("birthdayReminderTrigger",scheduler.DEFAULT_GROUP, new Date(),null,SimpleTrigger.REPEAT_INDEFINITELY, 60L * 1000L);
System.out.println(" ------------ TRIGGER CREATED --------------");
//Scheduling the job
scheduler.scheduleJob(birthdayJobDetail,birthdayJobtrigger );
System.out.println(" ------------ JOB SCHEDULED --------------");
} catch (SchedulerException ex) {
System.out.println(ex.getMessage());
} ************************************* SECTION OF WEB.XML ************************
<servlet>
<description>Quartz Initializer Servlet</description>
<servlet-name>QuartzInitializer</servlet-name>
<servlet-class>org.quartz.ee.servlet.QuartzInitializerServlet</servlet -class>
<init-param>
<param-name>shutdown-on-unload</param-name>
<param-value>true</param-value>
</init-param>
<init-param>
<param-name>start-scheduler-on-load</param-name>
<param-value>true</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet>
<servlet-name>BirthdayScheduler</servlet-name>
<servlet-class>com.csg.cs.cscomwebdev.servlet.timer.BirthdayScheduler< /servlet-class>
<load-on-startup>1</load-on-startup>
</servlet> *********************************** SERVER OUTPUT *******************************
Using CATALINA_BASE: C:\Documents and Settings\165171\.netbeans\5.0\jakarta-tomcat-5.5.9_base
Using CATALINA_HOME: D:\Program Files\netbeans-5.0\enterprise2\jakarta-tomcat-5.5.9
Using CATALINA_TMPDIR: C:\Documents and Settings\165171\.netbeans\5.0\jakarta-tomcat-5.5.9_base\temp
Using JAVA_HOME: C:\Program Files\Java\jdk1.5.0_02
May 20, 2008 7:27:13 PM org.apache.coyote.http11.Http11Protocol init
INFO: Initializing Coyote HTTP/1.1 on http-8084
May 20, 2008 7:27:13 PM org.apache.catalina.startup.Catalina load
INFO: Initialization processed in 766 ms
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardService start
INFO: Starting service Catalina
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardEngine start
INFO: Starting Servlet Engine: Apache Tomcat/5.5.9
May 20, 2008 7:27:13 PM org.apache.catalina.core.StandardHost start
INFO: XML validation disabled
May 20, 2008 7:27:14 PM org.apache.catalina.loader.WebappClassLoader validateJarFile
INFO: validateJarFile(D:\Java Programs\cs\CSCOMWEBDEV\build\web\WEB-INF\lib\servlet.jar) - jar not loaded. See Servlet Spec 2.3, section 9.7.2. Offending class: javax/servlet/Servlet.class
log4j:WARN No appenders could be found for logger (org.apache.catalina.session.ManagerBase).
log4j:WARN Please initialize the log4j system properly.
------------ STARTTING JOB --------------
------------ FACTORY GOT --------------
May 20, 2008 7:27:15 PM org.apache.coyote.http11.Http11Protocol start
INFO: Starting Coyote HTTP/1.1 on http-8084
May 20, 2008 7:27:15 PM org.apache.jk.common.ChannelSocket init
INFO: JK: ajp13 listening on /0.0.0.0:8009
May 20, 2008 7:27:15 PM org.apache.jk.server.JkMain start
INFO: Jk running ID=0 time=0/32 config=null
May 20, 2008 7:27:15 PM org.apache.catalina.storeconfig.StoreLoader load
INFO: Find registry server-registry.xml at classpath resource
May 20, 2008 7:27:16 PM org.apache.catalina.startup.Catalina start
INFO: Server startup in 2802 ms Can anybody please help out? Where exactly am I going wrong?
Thanks a lot!
ADYour stop condition is "continue if true". This means that, unless you press the button, the while loop will stop after one iteration.
First, you should change the termination condition to "stop if true".
Then you should make the stop button "latch when released" (right-click..mechanical action). Else you don't have a well defined state after the program stops.
You should decide on a reasonable loop rate and enter it for the wait control. (beter use a diagram constant if the value is always the same).
Why do you need to continue reading in a loop? Are you expecting the response to change over time?
Do you want to keep appending to the string indicator or only show the latest characters received?
Maybe you also need a wait between the writing and reading?
Delete the ms timer value indicator, it is completely useless.
Do you get any error codes?
Don't use the run continous button. Use the plain run button.
What device are you communicating with? Do you have documentation?
LabVIEW Champion . Do more with less code and in less time . -
I really need help for a school project im working on, it seems as though flash doesnt even recognise the actions in the layers, the codes in the first frame are as follows:
stop();
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
btnOS.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame);
function fl_ClickToGoToAndStopAtFrame(event:MouseEvent):void
gotoAndStop(8);
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
btnia.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_2);
function fl_ClickToGoToAndStopAtFrame_2(event:MouseEvent):void
gotoAndStop(41);
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
btnDD.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_3);
function fl_ClickToGoToAndStopAtFrame_3(event:MouseEvent):void
gotoAndStop(64);
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
btnCA.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);
function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void
gotoAndStop(2);
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
btnSpt.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_5);
function fl_ClickToGoToAndStopAtFrame_5(event:MouseEvent):void
gotoAndStop(3);
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
btnent3.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_6);
function fl_ClickToGoToAndStopAtFrame_6(event:MouseEvent):void
gotoAndStop(4);
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
btntvf.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_7);
function fl_ClickToGoToAndStopAtFrame_7(event:MouseEvent):void
gotoAndStop(5);
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
btnmus.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_8);
function fl_ClickToGoToAndStopAtFrame_8(event:MouseEvent):void
gotoAndStop(6);
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
btntrans.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):void
gotoAndStop(7);
/* Click to Go to Frame and Stop
Clicking on the specified symbol instance moves the playhead to the specified frame in the timeline and stops the movie.
Can be used on the main timeline or on movie clip timelines.
Instructions:
1. Replace the number 5 in the code below with the frame number you would like the playhead to move to when the symbol instance is clicked.
btnHome.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_10);
function fl_ClickToGoToAndStopAtFrame_10(event:MouseEvent):void
gotoAndStop(1);
Surely this should stop the document from looping when tested, when testing the images and buttons ect seem to be distorted and in different positions.
if it helps here is a download of the document:
http://www.sendspace.com/file/oxqcivAgain, you must read your "Compiler Errors" panel and fix the issues in there. Exporting clearly states:
Scene 1, Layer 'Actions', Frame 8, Line 71
1021: Duplicate function definition.
So go to scene 1, in the layer named "Actions", on frame #8, code line 71 and check the function name there which is: fl_ClickToGoToAndStopAtFrame_3. It tells you there's a duplicate function definition which means the function name needs to be changed because it's colliding with another function that has already used the same name. The timeline remembers functions and variables frame to frame so you can't use define the same function or variable twice without errors.
Change the function name to something you know will be unique like: fl_ClickToGoToAndStopAtFrame_999999999 on both that line and the function below it to match (2 occurances of it in that script) and the error goes away.
After that it compiled and ran fine but I received errors as I clicked through other pages. Your job is to read those syntax errors, go to the place specified and fix it until you no longer get errors. -
While loop never stops after reading the result
I 'amattaching the program with thismessage in which while loop never stops, going on continuing until I stops it manualy using the off button What i have to do to get it off automatically afetr execution and reading the query and getting the result in Read in Front panel
Attachments:
PMd VI.vi 33 KBYour stop condition is "continue if true". This means that, unless you press the button, the while loop will stop after one iteration.
First, you should change the termination condition to "stop if true".
Then you should make the stop button "latch when released" (right-click..mechanical action). Else you don't have a well defined state after the program stops.
You should decide on a reasonable loop rate and enter it for the wait control. (beter use a diagram constant if the value is always the same).
Why do you need to continue reading in a loop? Are you expecting the response to change over time?
Do you want to keep appending to the string indicator or only show the latest characters received?
Maybe you also need a wait between the writing and reading?
Delete the ms timer value indicator, it is completely useless.
Do you get any error codes?
Don't use the run continous button. Use the plain run button.
What device are you communicating with? Do you have documentation?
LabVIEW Champion . Do more with less code and in less time . -
My Macbook Pro will not stop loading at the start up page!
you know the start up page that appears when you press the power button, the blue ish white one with the apple logo on the middle and a circular loading thing? Well mine won't stop loading. I left it on all night and it still hasnt finished loading. Its the circular one that just goes around and around. Helpme! Wjat should I do??
Seeing the white, blue or gray screen with spinning thing for too long is a sign of trouble
It's called the "gray screen" and you can hopefully hold down the Shift key on a wired keyboard when rebooting to let the machine enter safe mode, then backup your data off the machine in case it's a failing hard drive and then go around uninstalling, updating reinstallling all your third party software.
If that doesn't fix it then a #18 Reinstall Just OS X usually does the trick too
go through the steps here one by one or have someone take a look at your machine
Step by Step to fix your Mac
Mac won't boot or "You need to restart"
Create a data recovery, undelete boot drive -
The PSE 10 process doesn't stop after closing the application. Why??
On Windows 7, the PSE 10 process doesn't stop when closing the application, therefore the PSE 10 app. will not restart once it is closed. The user must stop the process from task manager or reboot before PSE 10 can be restarted on a Windows 7 machine. The forum suggestion to double-click the exe (instead of the shortcut) as a solution, obviously isn't a solution and can't work. There are no updates to PSE 10 and the only access to any support is through this forum. There have been complaints about this on blogs all over the Internet. Why can't Adobe come up with a fix/update or if they have where is it posted?
First of all, there is no difference between the files on the disk and those downloaded as the trial. The only difference is that one comes with a serial number and the other does not. You can put your serial number into the trial version and it will then be activated. The only way the disk would behave differently is if there is some physical flaw (scratches, warping, etc). Usually such damage will cause the installation to fail, it's pretty difficult for such damage to modify the files in such a way that they still install but behave differently.
If you are dropping a file on the shortcut and the Photoshop Elements Editor is opening but the file is not, there could be a few different things going on there. Check your shortcut properties first: does it go to PhotoshopElementsEditor.exe or Photoshop Elements 10.0.exe? If the former, then there are probably some missing support files. If the latter, this is the Welcome Screen, which has likely been configured to launch the Editor automatically. However, you would be sending the file to the Welcome Screen, which doesn't do anything with the file. It is not capable of passing the file off to the Editor, only capable of launching it.
Also, double-clicking a shortcut is generally the exact same thing as double-clicking the file the shortcut points to, but you can add modifiers to shortcuts to make them behave differently. -
Can not start SAP instance after change the profile
Dear all
We use system copy to build SAP system.
Source
Ecc 6.0(64 bit)
Windows Server 2008 SP2
SQL Server 2008 SP2
Target
Ecc 6.0(64 bit)
Windows Server 2008 SP2
SQL Server 2008 SP2
In target system, we want to use the instance profile as source system,
but after copy from source system we find that if parameter em address_space_mb = 512 in the profile,
we can not start SAP instance.
Could anyone explain it?
Best regards
ShirleyHi Shirley,
I assume the hardware is less on the target than on the source or they are different at least in terms of hardware specs
If the system is not starting, check the dev_disp.log, the stderr* files, and the dev_w0 log from the work directory to find the exact error. Does the system start if you increase or decrease this value?
Regards,
Paul -
IChat stops working from the start. Help me!!
After using mac for about 1 month, my iChat starts this problem. Every time I open iChat and try to change the status, the app stops working and not responding at all. How to solve this problem???
HI,
OK, it sounds like the app at least Launches.
Can you access the Preferences ?
In iChat > Preferences > Accounts can you enable as many accounts as there are there including the Bonjour one ?
You should have at least two Buddy list show up.
From what you say at least one such as an AIM (Or Jabber) login is reading "Disconnected" and not doing anything when you click to change this.
Does the Bonjour one display fully, even if you have no Bonjour Buddies On line on your LAN (It is for connecting to other Macs that have iChat/Messages with the Bonjour account active.)
If there are no such Buddies it will display as an empty Buddy list but should connect and say Available.
In System Preferences > Security and Privacy > Firewall tab, is the Firewall ON ?
If it is On go to the Options Button and check the "Allow Signed Software" item is ticked and that iChat and IMAgent is in the Allowed List. (I am working in Mountain Lion and yours may only have an Advanced Button. Go there and see if you have).
Do not have Stealth enabled as iChat sends Pings in Video and Audio Only connections.
Basically if other apps like Web Browsers can get on the internet we have to look as to why iChat is not doing this.
Enabling the Bonjour account will tell us if it is a local issue or and Internet one.
If it looks like it is between the internet and the app then the Firewall is the first port of Call.
8:16 pm Saturday; September 28, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously -
New To Sap need advice for the start
Hi all i am new to this technology and i want to have a carrier in SAP I have mcse and ccna holder have got experience in IT so where and what and how shall i start
As i want to know it so can someone Advice me Please as i will be looking forward to talk the course but if no advice is given i am loss Thanks BonitoHello,
Get a job as a junior and learn as much as you can. After a couple of years you will start to get good enough to get a job which isnt a junior role.
Good luck.
Kind regards
Ash Thomas
<a href=http://www.ashthomas.com>Sap Abap CV & Sap Abap Resume</a>
<a href=http://www.ashthomas.com>www.ashthomas.com</a> -
After Changing the start date for a task in a project we are not able to save
Hi
When we are updating the task start date of a particular task the below message is poping up in Project Professional and when we trying to update in Pwa and saving it automatically the save is becoming undone.
We are logging in with that user credentials and checking where the user has not charged any actuals on that task.
Then a message pops up saying:
"The actual work in "xxxx" is out of sync with the actual work updated from timesheets. Actual work can only be updated by team members through PWA. Changes you have made to users' actual work will be lost during the save."
Can any body throw some light on the above issue.
Thanks
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.It seems you have enabled the option in server setting >> task Settings and Display >> Protect User Updates>> for restricting updates to PWA only ? this is one cause when this error message appears when the update restriction is to PWA
and PM tries to modify the Plan, the only exception to this is milestones which can be updated via Proj pro,
this being the case becomes a conflict when you say updates can be done only via PWA and try to overwrite the actual via MSP
kirtesh -
I use Ipod nano bought last year.
I use iMac with OS X Yosemite.
The problem appeared about 1-2 months ago
Have reset the Ipod to no avail.
If I have a song, say 8 minutes long, and want to start 1:00 and finish 4:00. That works alright with iTunes on my iMac. But when I sync the song to my iPod nano, then the song starts at 0:00 and ends at 8:00.- First try a rset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try restoring from backup
Maybe you are looking for
-
Can't join clients to domain in Server 2012 R2 Datacenter
I have done the searching. I have installed 2012 Datacenter 64bit. No problem. I installed the Ad Ds role and elevated it to a domain controller. I installed DHCP and DNS roles. I now want to join a client computer to this new domain in the serv
-
Unable to download Adobe AIR 2.6
I get the following error message when I try to download 2.6. "Installation may not be allowed by your administrator. Please contact your administrator." I tried to download an older version, and got the same error. I have windows xp, ser. pack 3.
-
HTTP-400 Too many arguments passed
Hello There, I installed the fresh 10g and applied patchset 2 on it. I get following error: HTTP-400 Too many arguments passed upper limit is 2000 Please help
-
After updating my iPhone 4 to iOS 7.04, I have to CONSTANTLY charge it. Has anyone else had this issue? If so, what was the solution?
-
How can i remove the photo from a contact for lumia 920 ? Thanks Solved! Go to Solution.