Sap storage bin

Dear All,
Please help me in the following
i want system to find the next empty storage bin..
The Requirement is for 250 stock
Lets say there is 100 stock in Storage Bin - XYZ and 150 stock in ABC Storage bin.
Is there a FIFO Strategy in which system will determine this values
regards
amey kulkarni

come on, use some more words.
.i want this at the time of LT06 transaction
what is this?
next empty bin ? does not make any sense for a stock removal (picking)
FIFO? there are 2 FIFO strategies available, FIFO and stringend FIFO.
check the link to the documentation
http://help.sap.com/erp2005_ehp_05/helpdata/DE/c6/f8457a4afa11d182b90000e829fbfe/frameset.htm

Similar Messages

Report for Material - Storage Location - Storage Bin

All SAP Gurus,
Is there any standard report available in which we can find out the storage bins for list of materials?
(We have not implimented Warehouse MAnagement)
Regards,

HI,
You need to have Warehouse management in place in order to view the storage bins for materials,
MMBE of MM cannot give you the idea of storage bins.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

Serial Numbers in A Storage Bin

Dear all,
In warehouse management we have serial numbers attached to each item in the warehouse and these items are batch managed. During goods receipt serial numbers are scanned using RF scanner and a transfer order is created for each item. We have a customer table to store the details like storage location and storage bin etc when they are first scanned in. There is no problem here.
If items are transferred from one storage bin to another using a transfer order, system is picking the serial numbers required for the transfer order posting. When corresposing material document is displayed using MB51, there is a tab for serial numbers that are included in this material document.
Is there any way to get all the serial numbers of the items stored at Storage Bin level?
Thanks and regards
Raj

Hi Christian,
Thanks for the reply.
In the mean time I was talking some more people here regarding this problem. Looks like there is no one obvious place where equipment serial numbers are stored.
Further digging in to SAP I could make out that the serial numbers get distributed to tables SER01 to SER07 based on the activity performed with key in OBJK. I think I will be able to get there.
I appreciate your time and reply.
Regards
Raj

Report by Storage Bin

Hello,
I uses the Inventory Module not WM. In the Material Master Record specifically at Plant Data / Storage 1 view, my client used the storage bin field to specify where the material will be storage.
I need to know if exists a report to display the Warehouse by storage bin.
I appreciate any help.
Regards,
Hector

Dear,
As far as I know not possible.
We developed Z report for similar requirement.
This storage bin is only significant if you do not use SAP warehouse management. It appears on goods receipt/issue slips.
Regards,
Syed Hussain.

Storage bin available when posting change is not confirmed completely

Dear Gurus, I have a question for you:
My costumer wants to do a posting change when the material is released from QM with a decision usage from Q to unrestricted use. The process is done in two steps: with LU04 the TO is generated and with LT12 is confirmed. When the TO is generated the position is half confirmed. With LT21 we can see the row for the ST (lets say ST 504 Open Storage type) and a second row 922 TR-ZONE. The first row appears green (as confirmed) and the second row appears red (Not confirmed).
My costumer says that " beacause of the strategy given for the storage entry, the storage bin released in the TO (not confirmed completely yet) is available at this moment.
If the storage bin is still physically full, the carrier will found not space for leaving the goods even SAP is telling him there is space available at this storage bin."
I have read that once yo start a TO the storage bin is blocked until the transaction is fully confirmed.
If this is correct I need to demostrate it and I don not find the way to do it.
I hope you understand my explanation and give me any clue.
I appreciate very much some help.
Al

agmogena wrote:
Ok, I will tell you the configuration I have. Lets point in a movement 921 quality to unrestricted use.
> Type Storage origin: 902 EQ and RC flags are set on. (confirmation control for storage type)
> Type storage TR: 922 are set on.
>
> Movement type 921 the flags for Confirm immed and Propose confirm are NOT set.
>
> I do a LU01 to create a intruction to change a material from Q to Unrestricted.
> with LT05 I create the TO.
> At this time if I look LT21 the TO created I see the tag source with two positions one for TS 902 green color and the second 922 in red.
> For the tag of target We can see the first position 922 In red and the second position 902 in green color.
>
> Perhaps this detailed explanation will help you to fully understand the scenario.
>
> Thank you again,
>
> Al.
From the above it isn't entirly clear that the first part of the T.O. is actualy confirmed, my settings are to autoconfirm this so I have no example to look at in my system. Perhaps the display shows the first line green before any actual confirmation..
I assume the stock status has not changed when you first view the T.O.? If the t.o. is partly confirmed I would expect to see the stock status changed and a neg in 922 until the second part is confirmed. Perhaps there is no confirmation at all yet, in LT21 what is the confirmation status? If you view the transfer order header there would be a partial confirmation showing with a yellow triangle, do you see this or no confirmation indicated at all?

Change Storage Bin Number in 309 movement type

Hi Gurus,
I have problems with creation TO for movement type 309(material to material posting), when i want to create the TO for that movement type, i can't change the destination bin.. The destination bin field in that TO is disable, how to make that field enable?
I try to add an user exit after creation of that TO, the user exit is MWMTO001.. so the user exit used for change the storage bin number after the TO created.. but that user exit never triggered after TO created.. How it could happen?
Any suggestion, how to change the storage bin number when i want to create TO from 309 movement type(material to material posting)?
Kind Regards
Ken

Hi Kris,
Ya, i already create the bin number, for example i material A fixed to bin 00001 and material B fixed to bin 00002, when i do movement 309 from material A to material B, why the bin goes to 00001? why not goes to bin 00002? Because material B is fix to bin number 00002..
For your solution, i just can change the bin during confirmation of the TO? Because, in this case, confirmation of that TO done by external system, so the external system will send idoc to SAP to confirm that TO..
Regards
Ken

Production Order to storage bin link

Hi Experts,
I have to develop a report where the client wants to track a FG (Batch managed) based on production order. One of the columns is storage bin as well. Is there a link to production order no and storage bins in SAP tables. Please suggest.
Regards,
Sachin

Hi Vivek,
I went through the logic you provided. Also the requirement has changed a bit. The client wants to track all the material movements related to the orders (261 and 101) with bin numbers. The selection screen is going to be order numbers or material numbers and a date range. It will be either (order no + date range) or (material no + date range).
For order no within a date range, I am passing all the materials in MKPF and looking for material documents posted within this particular date range. Then I am going to MSEG with these material documents and looking for the entered order numbers.
Now, since the MSEG table is too big and the order number is not a key field, I find myself in a big performance issue. Any suggestions would be greatly appreciated.
Regards,
Sachin

Storage Bin and Storage Type

Hi,
Please elaborate on what is Storage Bin, Storage Type, Bin Position, Stock Category and Special Stock, and their function. Also, if there is a link were I can find the definition of these terms, please mention.
Thanks

Hi ,
Here are links
[Storage Type|http://help.sap.com/saphelp_46c/helpdata/en/c6/f838f94afa11d182b90000e829fbfe/frameset.htm][Storage Bin]|http://help.sap.com/saphelp_46c/helpdata/en/c6/f838f94afa11d182b90000e829fbfe/frameset.htm]
Storage Section |http://help.sap.com/saphelp_46c/helpdata/en/c6/f838f94afa11d182b90000e829fbfe/frameset.htm]
Go to Help.sap.com
Go to Logistics Execution->WareHouse Management -> Basic Functions you will get everything.

Storage bin match code in LT06

Hi Expert's,
did anyone know why in the LT06 transaction (instead of the LT01) is not possible to use
- Source storage section (LTAPA-VLBER)
- Source Storage Bin (LTAPA-VLPLA)
match code.
Thanks.
BR.
Edited by: Marco Cariello on Apr 22, 2009 8:48 PM

Thanks Csaba,
but the note n.379070 it's OK only for SAP releases earlier than Release 4.0. We got ECC 6.0.
Have you other suggestions?
Thanks.

Standard report for Storage bin

All SAP Gurus,
Is there any standard report available from which we can know the storage bin for the materials?
Regards,

Hi,
Check the table MLGT(Material Data for Each Storage Type).
MLGT-Matnr (material number)
MLGT-LGNUM (Warehouse Number / Warehouse Complex)
MLGT-LGTYP(Storage Type)
MLGT-LGPLA(Storage Bin).
with Regards,
Jaheer.

Storage bin - stock in the past

Hi gurus,
I just would like to know the material, batch and stock quantity I had in determinated storage bin, in the past, for example in May 31th 2008. The system can get me that information ?!
Thank you in advance,
Maicon

Hi,
As per my knowledge there's no such standard SAP transaction. In IM you have MB5B to get stock level on a particular day, but it has no counterpart in WM.
You can use your current stock level (e.g. LX02) for that bin and use LT22 to get all WM-material movements where the source / destination bin is fthe bin which is in question (download the reports in excel > work it up).
Or you can develop an own report...
BR
Csaba
Edited by: Csaba Szommer on Jun 19, 2008 3:59 PM

WM t-Code for Tracking Storage bins where a Material batch have stayed?

Hello Gurus,
My client ask if there is any t-code (report or whatever) in WM where he would be able to track all the storage bins in which a material batch have stayed?
It would be a kind of history data about storage bins where the batch have passed inside the warehouse....Any Clues?
Thanks!!!

The only one that can serve your purpose is LT23.
Choose the "rainbow" icon and select by material and batch.
If you need help with selection screen feel free to ask... but it should be straight forward for SAP user.
Execute with all the right selections.
You will get a list of all the transfer orders which were used for that material/batch.
In the right part of TO details, you'll see storage bins, there are the ones that the material/batch have stayed in your warehouse...

Send Storage Bins to external system (change pointer, change document, ...)

Hello,
I need to send to my external system the storage bin modifications, namely, insert and delete information.
I haven't found any User Exits ou BADIs to the LS01 transaction.
I'm trying to do this using change pointers, but it doesn't seems to exist a standard way to this either, so I've created a custom Change Document for the LAGP table, but there's still no records in the CDHDR or CDPOS tables.
Is there a way to automatically generate this records without programatically calling the Change Document associated FM?
What are the options that I have to do this?
Thanks in advance,
Rui

Hello Rui,
perhaps you can use DBTABLOG (Think about data volume and performance).
http://help.sap.com/saphelp_40b/helpdata/en/34/60b6bfae724effe10000009b38f91f/content.htm
Best Regards, Dirk

Capacity control in storage bin for material

Hello,
I am trying to set up following scenario: I want to set the capacity of storge bin for material for example 16547. For one storage bin fit only 200 pieces of material 16547. So I set this in material master WM2 tab. Then I order 400 pieces, TR is generated, then I want to create TO in background, but it display error: Maximum quantity for storage bin will be exceeded. Then I have to create TO in foreground and confirmation 2 times.
So my question is: is there any way to set up that TO will be created in background and confirmed one time?
Thank you

a TO split will not be triggered by remaining capacity, never.
The TO split has to happen earlier, SAP is always trying to putaway the entire quantity of a single TO item into one bin. Hence you need to have many TO items.
This is controlled by Palletization (WM2 view).
If you get 200 on one pallet, the enter 200 in WM2 view and SAP will give you 2 TO items if you receive 400.

Storage Bin & storage Loc. via LSMW

Dear all,
I want to upload sto. Bin & Sto. loc from old sap system to new SAP system via LSMW.
So please provide any link showing step by step method for using LSMW for Sto. BIn & Sto Loc
uploading.
Regards,
Rocky
Edited by: Csaba Szommer on Aug 29, 2011 9:20 AM

Yes you can use LSMW or you can write one BDC which will execute LS01N transaction by reading from file the fields(St type,St bin,St Section, St Bin type,etc) and upload storage bins.
Regards,
Prashant

Sap storage bin

Similar Messages

Maybe you are looking for